Maharastra Sikshan mandal Dwara sanchalit lok maan tilak Saraswati Shishu Mandir Chandrashekhar Azad Jhansi main Chatrao ke Adhyan hetu ek Bhawan ka nirman karya.

S/F of Sign board I/C painting & Lettering etc.

Clearing jungle including uprooting vegetation grass bush wood tree and sapling of girth up to 30 cm measured a height of1 meter above ground level and removal of rubbish up to a distance of 50 meter outside the periphery of area cleared

Excavation in foundation in moorum mixed soil (in Bundelkhand area) including lift upto 1.5 m. and lead upto 30 m. and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in-charge a distance of 30 m. from the foundation trenches

Cement concrete in 1:4:8 cement, sand and 22. 40-53 mm granite stone ballast (crasher broken) in foundation including supply of all materials, labours and T&P etc. required for proper completion of the work .

M 150 brick work in 1:6 cement and fine sand of 1.25 F.M. mortar in foundation plinth in one brick thick wall including supply of all materials, labours and T&P etc. required for proper completion of the work . (S.I. No. 303)

R.C.C. work in 1:1½:3 cement, approved coarse sand and 20 mm guage granite stone grit forPlinth, lintel beam & sunshed.

R.C.C. work in 1:1½:3 cement, approved coarse sand and 20 mm guage granite stone grit for columns.

R.C.C. work in 1:1½:3 cement, approved coarse sand and 20 mm guage granite stone grit for Lighter Beam (S.I. No. 285 i)

R.C.C. work in 1:1½:3 cement, approved coarse sand and 20 mm guage granite stone grit for slab. (S.I. No. 284 i)

Mild Steel or Iron Work in reinforcement such as RB/R.C.C. work.

M 150 brick work in 1:6 cement and fine sand of 1.25 F.M. mortar in Super Structure in one brick thick wall including supply of all materials, labours and T&P etc. required for proper completion of the work .

Providing and fixing in position Door, Window, Ventilator Frame. including supply of all materials, labour and T&P etc. required for proper completion of the work.

Supply and fixing of M.S. grill of Approved quality and drawing made of flat iron including supply of all material, labour and T&P etc also including one coat of red oxide paint comp. in all respect as per direction of engineer-in-charge.

Supply of approved M.S. Z section windows and ventilators excluding cost of glass panes but including supply of all materials its fabrication nut & bolt, hold fast required complete of all respect at site of work.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B- Fixing with adjustable lugs with split end tail to each jamb. as per 10.14.1.1

12 mm thick plaster with 1 : 6 cement and fine sand of 1.25 FM. Mortar on smooth face of wall including supply of all materials, labours and T&P etc. required for proper completion of the work. (S.I. No. 17.58 iii)

15 mm thick plaster with 1 : 4 cement and fine sand of 1.25 FM. Mortar on rough face of wall including supply of all materials, labours and T&P etc. required for proper completion of the work.

Finishing walls withacrylice smooth exterior paint of required shade on new work with two coat applied @ 1.67 ltr./10sqm. And including base coat of water proofing cement paint applied @ 2.20 kg./10sqm.. Over one coat of cement based readymate wall putty including prepairing as per direction of Engineer - in - charge (S.I. No. 660+661) Page No. 63

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre as per Sl no. -13.41.1 Two Coats

Providing and applying Putty of 2 mm thick over plastered surface to prepare the surface even and smooth ,including supply of all materials, labour and T&P etc. required for proper completion of the work.

Painting or varnishing on two coat new work. including supply of all materials, labours and T&P etc. required for proper completion of the work. (S.I. No. 641+642) Page No. 61

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone ) finished with floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. 40 mm thick floor 20 mm nominal size stone aggregate. As SI No. 11.3.1

S/F 4 mm. thick and 40 mm. deep glass strips in flooring. 11.13.1

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm as per SI no 11.41.2

P/L 20 mm thick kota stone flooring over 20 mm thick base of cement mortar 1:4 including supply of all materials, labours and T&P etc. required for proper completion of the work . (S.I. No. 14.43 b)

E/W in filling including ramming, dressing with royalty etc.

Wiring point for Light with 1.5 sq mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy duty PVC conduit pipe cancealed in the wall complete as earthwire drawn inside the conduit with modular type switch . Including all materials , labour T&P etc required for proper complition of work. SI 131 C + 187 A

Wiring point for Fan with 1.5 sq mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy duty PVC conduit pipe cancealed in the wall complete as earthwire drawn inside the conduit with modular type switch . Including all materials , labour T&P etc required for proper complition of work. SI 133 C + 187 A

Wiring point for Plug with 1.5 sq mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy duty PVC conduit pipe cancealed in the wall complete as earthwire drawn inside the conduit with modular type switch . Including all materials , labour T&P etc required for proper complition of work. SI 134 C + 187 C

Supply and Wiring of Submain with two number 16 sq mm FRLSH PVC insulated 1100 V grade multi strand (M/S) single core copper conductor cable in 32 mm dia heavy duty (2 mm thick) PVC conduit concealed in wall complete in all respect . Including all materials , labour T&P etc required for proper complition of work. SI 214 C

S/F of LED Tube Light with metal heavy duty box type batten light fitting 1x22 Watt suitable for up to 1x22 watt LED Polycabonate tube light complete including tube complete in all respect . Including all materials , labour T&P etc required for proper complition of work. SI 1413 CAT - AA

S/F of 6 Amp to 32 Amp SPMCB (10KA) C curve complete in all respect . Including all materials , labour T&P etc required for proper complition of work. SI 1002 , CAT A

Supply and fixing of MS box size 250x200x65 as per ESOR2018 SI No. 162

S/F of Surface / flush mounting 12 way SPN Distribution board with additional metal door without MCB (Miniature Circuit Breaker) complete in all respect . Including all materials , labour T&P etc required for proper complition of work. SI 1025 A , CAT A

S/F of 63 Amp D.P. Isolator complete in all respect . Including all materials , labour T&P etc required for proper complition of work. SI 1005 B , CAT A

Supply of 1200 mm dia cielling fan ISI Marked (MR)

Supply and fixing of electronic fan dimmer 300/400 V ISI marked on the existing switch board.

Erection and testing of ceilling fan and regulator etc. excluding supply of down rod complete in all respect.

Supply and fixing of LED Bulb (MR)

S/F of Hexagonal/Round G.P. Fan Box of approved make made up of 1.0 mm thick ISI marked G.P. sheet spot welded 4 to 8 holes of 25.4 mm for pipe entry of box. complete in all respect . Including all materials , labour T&P etc required for proper complition of work. SI 1149 ESOR 2018

Please Enable Macros to View BoQ information