8281/E8

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling fencing wire mesh any type complete all as specified and as directed.

Dismantling posts of ant type ( wood, steel or RCC) of any section embedded in concrete including taking out embedded portion and making good disturbed ground complete all as spcified and as directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling floor, hearth or wall glazed tiling including cement mortar bedding (but not backing), removing the debries all as specified and directed.

Dismantling stone slab or tiles of any description and thickness laid dry or laid dry and pointed complete all as specifieda nd as directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc n exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm as in soft/loose soil complete all as specified and directed.

Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Material and Labour Plain cement concrete 1:4:8 type D2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

Material and Labour RCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in Beam, cantilever, bressummers complete all as specified and directed. Note: Necessary form work shall deemed to be included in quoted rates.

Material and Labour Precast cement concrete Jalli 35mm thick type B0 ( using 12.5mm graded crushed stone aggregates) including formwork and set in CM 1:4 complete all as specified and as directed including dismantling old unserviceable RCC jalli..

Material and Labour Brick work with fly ash bricks of designation 7.5, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

All as above Item No.15.00 here-in-before but except bricks. Note:- Servicable bricks will be obtained from Item No. 12.00 mentioned here-in-before.

Material and Labour Plain cement concrete 1:3:6 type C1 (using 20 mm graded crushed stone aggregates) as in coping complete all as specified and as directed.

Material and Labour Plain cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregates) as in bed block and post for embedding of angle iron fencing post complete all as specified and as directed.

Supply only PVC coated MS galvanised Chain link fencing with straining bolts and binding wire complete all as specified and as directed. Note:- Line wires shall be measured and paid separately under relevant items of these schedule.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Supply and fix Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) including taking down old unserviceable barbed wire complete all as specified and as direcetd.

Supply and fix Mild steel work in posts and struts and flat iron in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Material and Labour for Mild steel framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed.

Supply Only Mild steel TMT bars 8mm dia including binding with mild steel wire ( annealed) not less than 0.90mm dia complete.

Supply and Fix Mild steel screw bolts ( Machine made) with hexagonal or square heads at one end and screwed at other end, each screwed end to be fitted with one hexagonal or square nut and one washer, length of bolt n.exc 5 Cm and dia 11mm to 15mm complete all as specified and as directed.

Supply and Fix Mild steel, plain, black sheet, 1.60mm thik in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required including taking out old unserviceable plain sheet complete all as specified and as directed.

Material and Labour 16-18mm thick granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wall cladding and like in CM(1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:4 including necessary edge moulding/chamfering (full or half moulding) complete all as specified and directed.

Supply and fix Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Materials and labour 75 mm thick, plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base complete as specified and directed.

Materials and Labour Pre polished Chequered cement concrete tiles of size 300mm x300mm x25mm thick, with grey cement and no pigment, jointed in neat cemnt slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Materials and Labour Pre polished Chequered cement concrete tiles of size 400mm x400mm x25mm thick, with grey cement and no pigment, jointed in neat cemnt slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Materials and Labour 60mm thick Machine pressed precast conctete interlocking paver block with grey cement and pigment of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed including 50mm thick sand filling below paver block complete all as specified and as directed.

Materials and labour Glazed, ceramic, coloured tiles of size 450mm x 350mm x 7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick backing course cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

Materials and labour Glazed, ceramic, coloured tiles of size 300mm x 200mm x 7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick backing course cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

Material and Labour Rendering 20 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surfaces even and smooth with using extra cement complete all as specified and directed.

Materials and Labour Exterior emulsion paint ( Weather coat) paint of any colour / tint, two coats over a coat of primer and 2mm thick wall care putty on newly plastered external surfaces including necessary preparation of surfaces at any height of building complete all as specified and as directed.

Material and Labour Synthetic enamel paint, two coats over a coat of red oxide primer on new steel or iron surfaces over 10 Cm width or girth including necessary preparation of surfaces complete all as specified and directed.

SATYAM CONSTRUCTION

UJJAL ELECTRIC

ESS PEE UDYOG

UNIVERSAL

MS AP CONSTRUTION AND CO

KWALITY CONSTRUCTION

S B ENTERPRISE

TAMALIKA ENTERPRISE

REMCO