Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.2 LAccepted-AOC GP RAM COLONY AMRITSAR JALANDHAR 144103 | AMRITSAR | AMRITSAR | PUNJAB | 144103 | L1 | Accepted-AOC L1 | |
| 2 | L2₹49.0 L+₹2.0 L (4.22%)Rejected-Finance NEAR RAILWAY CROSSING ADAMPUR DOABA JALANDHAR JALANDHAR PUNJAB 144103 | JALANDHAR | PUNJAB | 144103 | L2 | Rejected-Finance Other than lowest. | |
| 3 | L3₹49.1 L+₹2.1 L (4.50%)Rejected-Finance CHOMO JALANDHAR PUNJAB 144103 | JALANDHAR | PUNJAB | 144103 | L3 | Rejected-Finance Other than lowest. | |
| 4 | L4₹49.2 L+₹2.3 L (4.82%)Rejected-Finance BFH 20 SHALIMAR BAGH DELHI 110088 | DELHI | NORTH WEST DELHI | DELHI | 110088 | L4 | Rejected-Finance Other than lowest. | |
| 5 | L5₹49.6 L+₹2.6 L (5.47%)Rejected-Finance | L5 | Rejected-Finance Other than lowest. |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
23 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Adampur
Military Engineer services Air Force Stn Adampur 144103
MISC REPAIR TO MD ACCN IN KANDOLA ENCLAVE AT AF STN ADAMPUR
2022_MES_533888_1
GE/AF/ADM-18/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE AF Adampur
Refer NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE AF Adampur
₹99,800
Yes
29 Aug 2022
27 Jun 2022
25 Jul 2022
27 Jun 2022
23 Jul 2022
9 Jul 2022
28 Jun 2022 - 8 Jul 2022
60 days
Amount
Excavation in trenches in soft/ loose soil n. exc 1.5 m wide and not exceeding 1.50 metre in depth; for foundation, laying of pipes, etc. And getting out complete, all as specified.
PCC type E-2 (1:5:10), using 40 mm graded stone aggregates as in filling & mass concrete, sub base, complete all as specified.
RCC type B-0 (1:2:4), using 12.5 mm graded stone aggregates as in chajjas / cooking platform etc like necessary formwork complete all as specified. complete all as specified.
Reinforced cement concrete, type B-1,(1:2:4), using 20 mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.
Supply only water proofing compound, ISI marked, complete all as specified.
Brick work using bricks as specified in PS-II clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified.
Brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:6), complete all as specified. NOTE: Old bricks obtained after dismantling of brick work will be reused after cleaning etc under this item.
Brick work using old size bricks, straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4), complete all as specified.
Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified.
Aluminium anodised barrel tower bolt of extruded section 150mm long, ISI marked, complete all as specified.
Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 250mm long, ISI marked, complete all as specified.
Stainless steel butt hinges100 mm long, ISI marked, complete all as specified.
Extruded aluminium alloy 100mm long butt hinges type C-21 with galvanised mild steel hinge pin anodised complete all as specified.
Extruded aluminium alloy handles, fabricated type, anodised,125mm long, ISI marked, complete all as specified.
Mild steel helical door spring 200mm, ordinary rat tail rod pattern including roller and roller plate ISI marked, complete all as specified.
Repair & making serviceable mild steel cupboard shutters by adusting locking arrangement & mild steel bars incl necessary welding, riviting or bilting which ever is required all as per specification complete.
Cup board lock 50 mm size, 04 lever, IN REPAIR complete.
Mild steel chromium plated handle, suitable for godrej pattern cupboard shutter IN REPAIR complete.
Stainless steel hydraulic auto soft closing hinges 100mm size including necessary fixing accessories complete.
Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples all as specified.
Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples IN REPLACEMENT all as specified.
Door strip comprising of aluminium holds & rubber strip fixed at bottom of door shutter with screws complete all as specified.
Stainless steel conduit 20 mm bore, cut to size and erected in position including provison SS brackets & PVC decorative type finial (Two nos for each opening) IN REPAIR, complete.
2nd class hard wood beadings, straight or chamfered or rounded, 12mm wide, fixed to existing wooden frame work with necessary glue, nails etc., fixed in repairs, all as specified.
Factory made 35 mm thick ,2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all all as specified.
2nd class hard wood rail and style, thicknesss of shutters,35 mm, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated,etc complete all all as specified.
Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm,etc complete all all as specified.
Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm thick wood grain finished colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening, complete all as specified.
Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2 mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face and 2 mm prelam PVC sheet on back face complete all as shown on drawing and as specified.
Factory made 'P' tube steel windows with side hung shutter with glazng bars each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, including one shop coat of zink chromate primer complete.
Factory made 'P' tube steel windows with side hung shutter without glazng bars each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, including one shop coat of zink chromate primer complete.
Factory made 'P' tube steel windows or ventilators, fixed type including one shop coat of zink chromate primer complete.
NOTES APPLICABLE TO SERIAL ITEM NO. 30 TO 32: Profile section used under these items shall be ERW hollow 'P' tube as shown in drawing No. CE/AF/STD-170/07, CE/AF/STD-171/07 and CE/AF/STD-172/07 as applicable.
Factory made PVC shelf of 22mm thickness consisting of panel of hollow PVC profile of 12mm thickness consisting of M S frame made out of M S tubes of 19 gauge thickness and size of 12mmx12mm inserted all around the hollow profile section and insert one 12mmx12mm M S tube in the center of this section and lipped with 10mm(5mmx2)th and 12mm wide on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick plain PVC sheet using solvent cement on both the sides of panel. 20mm x1mm th plain PVC leeping shall be provided with adhesive on the front visible side of the partition complete.
Factory made WPC board box type kitchen cabinet 300 mm deep (externaly) and 600 mm (Approx) high, fabricated by joining all four sides, middle shelf, backing with solvent cement and gypsum screws and having openble front shutter(s) complete.
NOTES APPLICABLE TO SERIAL ITEM NO. 34: (i) All parts of kitchen cabinet shall be made out of 18 mm thick WPC board of make mentioned in Appendix 'B'. (ii) Front Shutter(s) shall be bend at 90 degree & 5 mm thick WPC ply shall be provided on all internal sides of cabinet to rest the shutter and make it verman/insects proof. Each shutter shall have one No.100 mm size stainless steel handle, one magnetic catcher and shall be make operational by providing suitable size chromium plated piano hinge. (iii) Front open edges of kitchen cabinet shall be covered with 0.5 mm thick bonding tape of maching shade using adhesive as recommended by manufacturers. (iv) Contractor shall get the kitchen cabinet drawing approved in writing from the EIC before placing order for fabrication. (v) For measurement purpose front elevation area shall be measured.
Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, complete all as specified.
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
Pressed steel frames made out mild steel sheet 1.25 mm thick, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC (1:3:6) type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified for size of frame: -
105 mm x 60 mm
125 mm x 60 mm
Water Proofing Treatment to RCC roofs comprising of : -
Taking down existing water proofing treatment (any no. of layers) from RCC roofs including cleaning the surface including flashings and junction of parapet etc. with wire brushing & water to the entire satisfaction of EIC, complete all as specified.
PCC (1:2:4) type B-1 using 20 mm graded stone aggregate, laid to slope as directed by Engineer in Charge over RCC roofs as padding, complete all as specified.
Rendering 15 mm thick (Average thickness) rendering on roof surface including flashings and junction of parapets etc., finished even and fair in cement mortar (1:4), using water proofing compound as recommended by manufacturers after brushing cement slurry @ 1.20 kg/Sq. m, complete all as specified. NOTE: Supply only WPC will be measured & paid for separately under respective item of BoQ.
APP based polymeric membrane laid on primed roofs & flashing by forced application using Butane torch and sealing all joints on primed surface by applying hot blown industrial grade bitumen @ 85/25 @ 1.20 kg/Sq.m over a coat of bitumenous primer @ 0.40 litre per square metre over clean RCC/plastered roof surfaces & flashings complete, all as specified.
40 mm thick brick tiles are bedded over 15 mm thick cement mortar (1:4), and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on APP membrane complete all as specified.
40 mm thick brick tiles (Except Tiles) are bedded over 15 mm thick cement mortar (1:4), and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on APP membrane complete all as specified.
Making benching with PCC (1:2:4) type B-0 (using water proofing compound) along side walls adjoining to roofs, in CONCAVE SHAPE, complete all as specified. NOTE: WPC will be measured and paid for separately under respective item of BoQ.
Water Proofing Treatment to RCC sunken surfaces comprising of : -
Rendering 15 mm thick (Average thickness) rendering on sunken surfaes including flashings, finished even and fair in cement mortar (1:4), using water proofing compound as per recommended ratio, after brushing cement slurry @ 1.20 kg/Sq. m, surfaces complete all as specified. NOTE: Supply only WPC will be measured & paid for separately under respective item of BoQ.
LDPE sheet 150 micron laid over applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m & adjoining vertical surfaces including applying bitumenous primer @ 0.40 litre per square metre over clean RCC/plastered roof surfaces complete all as specified.
NOTE APPLICABLE FOR SERIAL ITEM 38 & 39: For Guarantee of Water Proofing Treatment refer PS clause 11.5.
uPVC pipes, 110 mm external dia pipe, type-A, ISI marked (IS:13592) single socketed in any length with rubber ring joints, fixed to wall with PVC brackets as SWR / rain water pipes, IN REPAIR, complete all as specified
18/19 mm thick High density board , flat pressed, single layer type or three layer type with BWR fixed as in modular kitchen cabinets with necessary screws IN REPAIR complete.
Decorative laminates type I, 0.9-1 mm thick of matt finish, colour and pattern as approved by GE, fixed with approved adhesive complete all as specified.
25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate, finished rough, as in sub floors or similar locations, complete all as specified.
75 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, and joints shall be sealed with joint sealing comound grade 'A' complete all as specified.
Roughning surfaces of old concrete floor by picking ,sweeping clean and washing down with water to remove dust etc including brushing neat cement slurry with 3 kg of cement per sqm complete all as specified.
Granite jet black shade, 15-18 mm thick,as in step, jambs, cooking platform and like, machine cut, machine polished, bedded and jointed with grey cement slurry & pointed with grout of matching shade including necessary cutting over & including 10 mm thick (average thickness) cement mortar (1:4), complete all as specified.
Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified.
Glazed ceramic coloured tiles 7 8mm thick (square/ rectangular) area of each tile exc. 0.16 sq.m but n. exc. 0.20 sq.m, on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry & pointed with polymer based grout of matching shade, laid over and including 10mm thick rendering in cement mortar (1:4) complete all as specified.
Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.08 sqm but n. exc. 0.18 sqm laid in floors etc, set and jointed in neat cement slurry & pointed with polymer based grout of matching shade, laid over and including 15 mm thick bedding layer in cement mortar (1:4) complete all as specified
First quality, vitrified ceramic, double charged straight cut/joint free, 10 mm thick dark shade tiles, area of each tile exceeding 0.42 Sq.m but not exceeding 1 Sq.m, in floors etc. over & including 15 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry & pointed with polymer based grout of matching shade, complete, all as specified.
First quality, vitrified ceramic, double charged straight cut/joint free, 10 mm thick dark shade tiles, area of each tile exceeding 0.42 Sq.m but not exceeding 1 Sq.m, on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in grout of matching shade, laid over and including 10mm thick rendering in cement mortar (1:4), including necessary cutting as per site requirement complete, all as specified.
Full body homogeneous vitrified anti skid surface finish, not less than 12 mm thick of size 300mm x 1200mm laid in treads of staircase/brick steps etc, set and jointed in neat cement slurry pointed with polymer based grout of matching shade, laid over and including 15 mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement complete all as specified
Full body homogeneous vitrified anti skid surface finish, not less than 12 mm thick of size 200mm x 1200mm, laid on vertical surfaces in riser of staircase/brick steps etc, set and jointed in neat cement slurry pointed with polymer based grout of matching shade, laid over and including 10 mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement complete all as specified
Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6) complete all as specified.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), mixed with water proofing compound as manufacturers instruction complete all as specified.
Flush pointing to brick tiles in cement mortor (1:3) including raking out joints / pointing to brick tiles of any description laid in roof surfaces in any type of mortar complete all as specified.
Repairing of RCC projection chhajjas, roof, facia etc by necessary preparation. Scraping cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC with cement concrete (1:1.5:3) using 20mm graded stone aggt and reinforcement with welded mesh of weight 2 kg / Sq.mm but n.exc 3 kg / Sq.mm (if reqd) with or without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n.exc 5 Sq.m and thickness of RCC member n.exc 70mm incl necessary formwork complete all as specified. (The rate quoted by the contractor shall included for welded mesh, scaffolding and necessary formwork upto triple storey bldg).
Prepration of old plastered or un-plastered surface of ceiling and applying one coat of white wash complete all as specified.
Three coats of white washing on new plastered ceiling surfaces, including preparation of surfaces, complete all as specified.
Prepration of old plastered or un-plastered surface of wall and applying two coats of white wash complete all as specified.
Prepration of old plastered wall surfaces and applying two coats of interior acrylic distemper complete all as specified.
Prepration of old plastered ceiling surfaces and applying two coats of interior acrylic distemper complete all as specified.
Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed). (b) Two coats of interior acrylic distemper/oil bound distemper over and including a coat of acrylic emulsion primer.
Complete removal of existing treatment of any description, including prepration of wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed). (b) Two coats of interior acrylic distemper/oil bound distemper over and including a coat of acrylic emulsion primer.
Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed). (b) Two coats of exterior acrylic emulsion over and including a coat of water based exterior primer.
Complete removal of existing treatment of any description, including prepration of wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed). (b) Two coats of exterior acrylic emulsion over and including a coat of water based exterior primer.
Sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.m in each pane complete all as specified.
Preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified.
Preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over & including a coat of pink primer complete all as specified.
Preparation of old painted steel & iron surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified.
Two coats of synthetic enamel paint over & including a coat of red oxide primer over steel & iron (new) surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified.
Steel tubes ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors IN REPLACEMENT, of size: -
15mm bore
20mm bore
Disconnecting existing tanks of capacity exceeding 250 litre but not exceeding 500 litre, setting aside (or lowering if required) for cleaning/roof repair etc. and hoisting, reconnecting and re-fixing in position after necessary cleaning by removing all scale and dirt etc. including cleaning mouth of circulating service pipes complete, all as specified.
500 litre capacity, white, three layered polyethylene water storage tanks (cylindrical vertical with closed top) including hoisted and fixed in position, making connections, IN-REPAIR, complete all as specified including the following acessories: - (i) PTMT ball valves, high pressure, with epoxy coated aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, IN REPAIR, complete all as specified. (iii) Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, IN REPAIR, complete all as specified. (iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP.
1000 litre capacity, white, three layered polyethylene water storage tanks (cylindrical vertical with threaded lid) including hoisted and fixed in position, making connections, IN-REPAIR, complete all as specified including the following acessories: - (i) PTMT ball valves, high pressure, with epoxy coated aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, IN REPAIR, complete all as specified. (iii) Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, IN REPAIR, complete all as specified. (iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP, IN REPAIR, complete all as specified.
Angular stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete. MAKE: PRAYAG Cat No. 6610 or equivalent make mentioned in Appndix 'B'.
Concealed stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete. MAKE: PRAYAG Cat No. 6618 or equivalent make mentioned in Appndix 'B'.
Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete. MAKE: PRAYAG Cat No. 6608 or equivalent make mentioned in Appndix 'B'.
Pillar cock, swan neck type, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete. MAKE: PRAYAG Cat No. 6614 or equivalent make mentioned in Appndix 'B'.
Wall mixer telephonic, with crutch with (provision for and includig hand shower), cast copper alloy, chromium plated, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete. MAKE: PRAYAG Cat No. 6680 or equivalent make mentioned in Appndix 'B'.
Centre hole basin mixture pillar mounted tap of 15mm bore dia, cast copper alloy chromium plated, screwed down, high pressure, with long screwed shanks for iron pipe, fixed IN REPAIR, complete. MAKE: PRAYAG Cat No. 6650 or equivalent make mentioned in Appndix 'B'.
125 mm size overhead ABS shower with cast copper alloy chromium plated arm 225 mm long with flange and fixed in position, IN REPAIR, complete. MAKE: PRAYAG Cat No. BS-76 or equivalent make mentioned in Appndix 'B'.
Stainless steel towel rail 600 mm long, fixed to wall with SS screws and PVC rawl plugs, IN REPAIR, complete. MAKE: PRAYAG Cat No. BA-10S or equivalent make mentioned in Appndix 'B'.
Bathroom mirror Cabinet (PTMT alloy) of size 450 x 350 x 100 mm with SS screws and fixed in position, IN REPAIR, complete. MAKE: PRAYAG Cat No. 557 or equivalent make mentioned in Appndix 'B'.
Corner glass shelf 300 mm size with brass brackets fixed to wall with SS screws and PVC rawl plugs, IN REPAIR, complete. MAKE: PRAYAG Cat No. BEA-56 or equivalent make mentioned in Appndix 'B'.
Vitreous China wash down water closet pan (pedestal pattern), white ISI marked, including fixing acessories, IN REPAIR, complete all as specified.
One piece Vitreous China wash down water closet pan (pedestal pattern) of size 360 x 640 x 685 mm with soft close seat cover, hinges and twin flush fittings, white, including fixing acessories, IN REPAIR, complete. MAKE: Jaquar or equivalent make mentioned in Appndix 'B'.
PVC water closet seat and white cover with & including mild steel chromium plated hinging device & rag bolts, IN REPAIR, complete all as specified.
Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, ISI marked, white, with integral foot rests (excluding flushing cistern and flush pipe), IN REPAIR, complete all as specified.
PVC flushing cistern 6 litre capacity, syphonic action type, any shade, with side handle, ISI marked (IS: 7231) with flush pipe and all fixing arrangements, IN REPAIR, complete all as specified.
Vitreous China wash basin, white, flat back, size 550 x 400 mm, ISI marked, complete all as specified. including fixing acessories like galvanised brackets with PTMT waste coupling half or full threaded suitable for & including 32 mm size PVC discharge pipe, IN REPLACEMENT, complete.
Stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory with plug waste pipe washers including cantilever cast iron brackets connecting union etc overall size 940mm x 460mm x 203 mm with bowl size 405mmx 354mm IN REPLACEMENT complete.
Steel plate rack made of stainless steel 0.6mm thick over all size 610 x 760 x 254 mm complete all as specified
PVC connections 15 mm size of length 450 mm with PTMT nuts, IN REPLACEMENT complete all as specified.
PTMT shelf 250mm long fixed with and including chromium plated brass screws and wooden / plastic cleats IN REPLACEMENT complete.
Stainless steel (304 grade) grating with frame, wih or without hole 100-110 mm size, IN REPLACEMENT, complete all as specified.
75mm dia uPVC / PVC floor trap including jointing with solvent and embedding in cement concrete type B-1 (1:2:4) IN REPAIR complete all as specified.
uPVC pipes, type-B, ISI marked (IS:13592) single socketed in any length with rubber ring joints, fixed under floors / fixed to wall as SWR pipes, IN REPAIR, complete all as specified of size: -
75 mm external dia pipe
110 mm external dia pipe
uPVC/PVC bends any radius, complete all as specified. suitable for uPVC soil waste discharge pipes, IN REPAIR, of size: -
75 mm external dia pipe
110 mm external dia pipe
uPVC/PVC branch pieces(single or parallel), complete all as specified. suitable for uPVC soil waste discharge pipes, IN REPAIR, of size: -
75 mm external dia pipe
110 mm external dia pipe
uPVC/PVC branch pieces(single or parallel) with oval access door complete all as specified. suitable for uPVC soil waste discharge pipes, IN REPAIR, of size: -
75 mm external dia pipe
110 mm external dia pipe
Taking down cement plaster of any description on brick walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sq.m each and removing from site all as specified.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sq.m but not exceeding 4.00 Sq.m each and removing from site all as specified.
Taking down shutters of any description not exceeding 1.00 sqm each and removing from site all as specified.
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site all as specified.
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening after easing adjusting and minor repair complete all as specified.
Taking down iron gate shutters of any description over all size n exc 6.0 Sq.m of each shutter and refixing in the same or other gate pillar after relocating the pintel hinges, necessary cutting / welding of gates to make functional etc complete.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided all as specified.
Demolition brickwork or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified.
Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided all as specified.
Demolition of mud phuska in roofs, any thickness including plaster and leeping plaster (whether full thickness removed or only part thereof) all as specified.
Dismantlig brick tiles in roof laid dry and pointed in cement mortar all as specified.
Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline.
M/S GURBACHAN SINGH
LABH SINGH AND SONS
NEW GURBINDER INDUSTRIES
PRATHAM TRADERS
ELECTRA ENGINEERS
M/s Sahib and Company
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .