588/12630-Repair to the Sub-Judge Residence at DNK Colony, Koraput during the year 2026-27

Providing and laying water proofs with polymetic bituminous membrance (Plastic felt) of 2.25 Kg / Sqm and 1.5mm thickness consisting of layers having centre core of 20 micrones thermoplastic high molecular high density polyethylene HMHDPE film of grade 2504 including priming the surface with bituminous primer at the rate 0.3 Kg / Sqm applying and laying plastic felt membrance with 10cm over lap adhered to blown bitumen of 85 / 25 or 90 / 15 grade and covered with a layer of hot blown bitumen at the rate 1.2 Kg / Sqm including cost conveyance cess of all materials and labour T and P etc. complete and as per direction of Engineer-in-Charge.

Supplying fitting fixing in all fabricated of M.S. iron door windows and angle in proper position including making hole to walls or RCC structuremaking good to the dmages to walls or RCC structure including cost of all materialslabour T and P etc. complete in all respect as per specificationdirection of the Engineer-in-Charge.

Supplying and fitting-fixing of Un plasticised Poly Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.) Three Track Two Panel sliding window 60 Series duly manufactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and Window Sash of 39 mm x 58 mm x 2.5 mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated and welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638 14,EN 477 95 and other applicable codes and standards

Dismentalling of old lime or cement plaster from walls including stacking of raking out joints 12mm deep and removing the debris within 50m lead including cost of all labour cess and T and P required for the work etc. complete in all respect and as per direction of Engineer-in-charge.

12mm thick cement plaster in C.M. (1:6) over brick work finished smooth after raking out joints including watering and curing etc. complete including cost conveyance cess and royalities DMF EMF additional charges of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge.

Providing supplying diluting and injecting chemical emulsion for existing building Anti-termite treatment to both side below masnory wall existing floor points of contact of wood work by chlopyriphos specifications including drilling and plugging holes at 300mm center to walls with making good to the holes with C.M (1:4) after treatment including cost of all materials labour T and P required for the work as IS 6313 (Part-3)-2001 (Second Revision) complete.

Dismentalling and removing 2.5cm thick A. S. flooring including stacking the useful materials for reuse and removing and cleaning the debries with 50M lead including cost conveyance cess and royalities of all materials with labour and T and P required for the work etc. complete as per direction of Engineer-in-charge.

R. C. C. work in slab in C. C. (1:11/2:3) using 12mm size H. G. chips of approved quality from approved quarry including hoisting lowering and laying concrete in layers watering and curing for four weeks centering shuttering and finishing exposed surface smooth including all cost conveyance cess and royalities DMF EMF additional charges of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge.

Straightening bent up or coiled rods cutting bending craking hooking welding or jointing (if required) the M. S. rods or Tor steelbinding wiresbinding tying the grills hoisting loweringplacing in proper position as required for RCC worksfor providing cost conveyance of M. S. rods or Tor steelbinding wires of 18 to 20 gaugelabour and cess with all T and P required for the work etc. complete in all floors (weight of binding wires will not be considered for payment will be made on weight of M. S. rods or Tor steel only) as per direction of the Engineer-in-Charge.

Dismentalling and removing of old grading concrete including stacking the useful materials for reuse and removing and cleaning the debries within 50m lead including cost conveyance cess and royalities of all materials with all labour and T and P required for the work complete and as per direction of he Engineer-in-Charge.