REPAIR MAINTENANCE OF INTERNAL ELECTRIFICATION AND CONNECTED WORKS AT CGRA COMPLEX AND OTM AT DHQ7 PARADIP

Amount

Taking down carefully copper/aluminium point wiring including sunken MS boxes (light, fans, socket or power) complete, (fittings such as switches, ceiling roses,call bell, pendants, regulators, socket etc by unscrewing from board carefully and making good disturbed surfaces of walls, floors etc complete all as specified & directed .

M&L for point wiring with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick switch board and brass screws with cap washers for one light/Fan point controlled by one single way switch including all necessary wall cutting and making good disturbed surface all as directed and specified.(Make of wire: .Finolex/Polycab/Havells. Make of PVC Conduit :-Plaza/Prestoplast/Precision)

M&L Point wiring for one light point or one fan point controlled by one switch with two runs of FRLS grade PVC insulated unsheathed stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLS grade PVC insulated unsheathed stranded copper conductor as for earth continuity wire to be drawn in and including PVC casing & caping ( medium grade) not less than 25 mm width with fittings & fixtures including MS sheet metal switch / terminal box 1.22 mm thick upto (200x300)mm size duly covered with backelite sheet cover 3.00mm thick and continutiy conductor shall be connected to common earth and earth dolly and making good disturbed surface to walls complete all as specified & directed . .(Make of wire: Finolex/ Polycab/Havells Make of PVC Casing-N- Caping :-Plaza/ Prestoplast/ Precision)

All as per item No-2 above but Concealed wiring in Existing Conduit .

All as per item No-2 above but for one light point controlled by one two way switch

All as per item No. 2 above but for call bell point.

All as per item No. 2 above but one 3 pin socket outlet 5 Amps on same board.

All as per item No. 2 above but one 3 pin socket outlet 5 Amps but independent board with cable 1.5 Sqmm two run & 1.5 Sqmm one run of earth continuty.

All as per item No.2 here in before but for 5/15 Amps point on independent board with two runs of 2.5 Sqmm FRLS grade PVC insulated unsheathed stranded Copper conductor and 2.5 Sqmm, FRLS grade PVC insulated, unsheathed, stranded copper conductor as earth wire.

Taking down unserviceable sub main /Sub circuit wiring of any type and size including conduit, batten wiring for necessary repair/replacement.

M&L Sub main wiring using two runs of FRLS grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 1.5 Sqmm and one run of 1.5 Sqmm FRLS grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size including making good the disturbed surface to match the existing tint complete all as specified and directed. Note : Two runs of 1.5 Sqmm copper wire,one run of 1.5 Sqmm wire & one run PVC Conduit shall be measured as one unit.(Make of wire: Finolex/Polycab/Havells, Make of PVC Conduit:-Plaza/Prestoplast/Precision)

M&L Sub main wiring using two runs of FRLS grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 2.5 Sqmm and one run of 2.5 Sqmm FRLS grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size including making good the disturbed surface to match the existing tint complete all as specified and directed. Note : Two runs of 2.5 Sqmm copper wire,one run of 2.5 Sqmm wire & one run PVC Conduit shall be measured as one unit. (Make of wire: Finolex/Polycab/Havells, Make of PVC Conduit:-Plaza/Prestoplast/Precision)

M&L Sub main wiring using two runs of FRLS grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 4.0 Sqmm and one run of 4.0 Sqmm FR grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size including making good the disturbed surface to match the existing tint complete all as specified.Note : Two runs of 4.0 Sqmm copper wire,one run of 4.0 Sqmm wire & one run PVC Conduit shall be measured as one unit. .(Make of wire: Finolex/Polycab/Havells , Make of PVC Conduit-Plaza/Prestoplast/Precision)

M&L Sub main wiring using two runs of FRLS grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 6.0 Sqmm and one run of 6.0 Sqmm grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size including making good the disturbed surface to match the existing tint complete all as specified.Note : Two runs of 6.0 Sqmm copper wire,one run of 6.0 Sqmm wire & one run PVC Conduit shall be measured as one unit. .(Make of wire: Finolex/Polycab/Havells, Make of PVC Conduit :-Plaza/Prestoplast/Precision)

M&L Sub main wiring using two runs of FRLS grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 10.0 Sqmm and one run of 10.0 Sqmm grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 32 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size including making good the disturbed surface to match the existing tint complete all as specified.Note : Two runs of 10.0 Sqmm copper wire,one run of 10.0 Sqmm wire & one run PVC Conduit shall be measured as one unit. (Make of wire: Finolex/Polycab/Havells, Make of PVC Conduit :-Plaza/Prestoplast/Precision)

S&F in replacement Switch piano, flush type, single pole, one way 5 Amps, 240V complete all as specified and directed. Make:- Anchor/L&T/Havells/Legrand

Fixing only Switch piano, flush type single pole, one way, 5 Amps complete all as specified and directed. (Serviceable switch obtained from item No-1 shall be reused).

S&F Switch piano, flush type, two pole, two way 5 Amps, 240V complete all as specified and directed. Make:- Anchor/L&T/Havells/Legrand

Fixing only Switch piano, flush type two pole, two way, 5 Amps (Serviceable switch obtained from item No-1 shall be reused) complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15 Amps, 240V complete all as specified and directed. Make:- Anchor/L&T/Havells/Legrand

Fixing only Switch piano, flush type single pole, one way,15 Amps (Serviceable switch obtained from item No-1 shall be reused) complete all as specified and directed.

S&F Bell push Switch, flush type, single pole, one way 5 Amps, 240V complete all as specified and directed. Make:- Anchor/L&T/Havells/Legrand

S&F Call Bell ,Ding-Dong ,single pole, AC, 230 Volts complete all as specified and directed. Make:-Anchor/L&T/Havells/Legrand

S&F in replacement Switch socket combination 2 in 1, 5 pin, 5 Amps flush type 240 Volt complete all as specified and directed. Make:- Anchor/L&T/Havells/Legrand

Fixing only Switch socket combination 5 Amps, flush type (Serviceable awitch socket combination obtained from item No 1 shall be reused) complete all as specified and directed.

S&F Socket outlet 2 in 1, 5 pin, 5 Amps flush type 240 Volt complete all as specified and directed. Make:- Anchor/L&T/Havells/Legrand

Fixing only socket Outlet 5 Amps, flush type (Serviceable awitch socket combination obtained from item No 1 shall be reused) complete all as specified and directed.

S&F in replacement Socket outlet 2 in 1, 5 pin, 5/15 Amps flush type 240 Volt complete all as specified and directed. Make:- Anchor/L&T/Havells/Legrand

Fixing only socket Outlet 15 Amps, flush type (Serviceable awitch socket combination obtained from item No 1 shall be reused) complete all as specified and directed.

S&F in replacement Switch socket combination 5/15 Amps flush type,6 pin,5 in 1 complete all as specified and directed.Make:- Anchor/L&T/Havells/Legrand

Fixing only Switch socket combination 15 Amps (Serviceable Switch socket combination obtained from item No 1 shall be reused) complete all as specified and directed.

S&F in replacement Ceiling rose,3 terminal PVC/poly carbonate isolated body complete all as specified and directed. Make:-Anchor/L&T/Havells/Legrand

Fixing only ceiling rose (Serviceable Ceiling rose obtained from item No 1 shall be reused) complete all as specified and directed.

Supply and fixing in replacement of Step type electronic Fan regulator socket type 120W, 250V on the existing phonolic laminated sheet etc as required as existing type and size complete all as specified and directed.(Make-Anchor/L&T/Havells)

Supply and fixing in replacement including connection of modular switch one way 6 Amps 1 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing in replacement including connection of modular switch one way 16 Amps 1 Module complete all as specified and directed. (Make : .Crabtree/L&T/Havells)

Supply and fixing in replacement modular Bell push 6A 1 Module complete all as specified and directed. (Make : .Crabtree/L&T/Havells)

Supply & fixing in replacement including connection modular socket outlet 2 /3 pin 6 Amps 2 modules complete all as specified and directed. (Make : .Crabtree/L&T/ Havells)

Supply & fixing in replacement including connection modular socket outlet 2 /3 pin 6/16 Amps 2 modules complete all as specified and directed. (Make : .Crabtree/L&T/ Havells)

Supply and fixing in replacement of Modular Fan step regulator,120 watts 2 module complete all as specified and directed.(Make : .Crabtree/L&T/Havells)

Supply and fixing in replacement white modular cover plate with frame 1 Module complete all as specified and directed. (Make : .Crabtree/L&T/Havells)

Supply and fixing in replacement white modular cover plate with frame 2 Module complete all as specified and directed. (Make : .Crabtree/L&T/Havells)

Supply and fixing in replacement white modular cover plate with frame 3 Module complete all as specified and directed. (Make : .Crabtree/L&T/Havells)

Supply and fixing in replacement white modular cover plate with frame 4 Module complete all as specified and directed. (Make : .Crabtree/L&T/Havells)

Supply and fixing in replacement white modular cover plate with frame 6 Module complete all as specified and directed. (Make : .Crabtree/L&T/Havells)

Supply and fixing in replacement white modular cover plate with frame 8 Module complete all as specified and directed. (Make : .Crabtree/L&T/Havells)

Supply and fixing in replacement modular metal flush box 1/2 Module complete all as specified and directed.

Supply and fixing in replacement modular metal flush box 3 Module complete all as specified and directed.

Supply and fixing in replacement modular metal flush box 4 Module complete all as specified and directed.

Supply and fixing in replacement modular metal flush box 6 Module complete all as specified and directed.

Taking down old Unserviceable DB including fittings/fixtures with MCBs of any make and size all as specified and directed

S&F MCB DB made of sheet steel phosphatised, powder painted double door IP 43 with bus bar, neutral link, earth bar and din rail of SPN 4 way, 240 Volts fixed in wall,making good disturbed surfaces, ccomplete all as specified and directed. (Make/Model :Cat No:DBSPN004DD of L&T or Legrand/Havells)

S&F MCB DB made of sheet steel phosphatised, powder painted double door IP 43 with bus bar, neutral link, earth bar and din rail of SPN 6 way, 240 Volts fixed in wall,making good disturbed surfaces, complete all as specified and directed. (Make/Model :Cat No:DBSPN006DD of L&T or Legrand//Havells)

S&F MCB DB made of sheet steel phosphatised, powder painted double door IP 43 with bus bar, neutral link, earth bar and din rail of SPN 8 way, 240 Volts double door fixed in wall , making good disturbed surfaces, complete all as specified.(Make : L&T/Legrend/Havells

S&F MCB DB made of sheet steel phosphatised, powder painted double door IP43 with bus bar, neutral link, earth bar and din rail of SPN 12 way, 240 Volts double door fixed in wall , making good disturbed surfaces, complete all as specified and directed. (Make : L&T/Legrend/Havells

S&F MCB DB made of sheet steel phosphatised, powder painted, double door IP43 with bus bar, neutral link, earth bar and din rail of TPN 4 way, 415 Volts fixed in wall, making good disturbed surfaces, complete all as specified and directed. (Make : L&T/Legrend/Havells )

Supply and fixing of VTPN DB double door,IK 09,IP43-Metal door, 4 way, made of CRCA sheet steel ,RAL 9003,powder coated with bus bar, neutral link, earth bar withprovision upto DU125H,MCCB,4 pole as incomer and SP/TP MCBs as Outgoings, complete all as specified and directed. ( Make/Model- DBVTL004DD of L&T or Equivalent in Legrand/Havells).

S&F in replacement MCCB 4 pole, with adjustable thermal & magnetic release of breaking capacity 30 kA, 415 Volts, 63 Amps complete all as specified and directed. (Make: L&T/Legrand/Havells)

S&F in replacement MCCB 4 pole, with adjustable thermal & magnetic release of breaking capacity 30 kA, 415 Volts, 100 Amps complete all as specified and directed. (Make: L&T/Legrand/Havells)

S&F in replacement MCCB 4 pole, with adjustable thermal & magnetic release of breaking capacity 30 kA, 415 Volts, 125 Amps complete all as specified and directed. (Make: L&T/Legrand/Havells)

S&F in replacement Isolator, FP, 415 Volt 63 A complete all as specified and directed. (Make L&T,Cat No.BF406300/ Legrand/Havells)

All as per item No. 60 above but FP, 415 Volt 100 A complete all as specified and directed. (Make L&T,Cat No.BF410000 /Legrand/Havells)

S&F MCB, SPN. 6-32 Amps rating 240, volt, 'C' series, 10 kA complete all as specified and directed. (Make L&T,Cat No.BB20320D or Legrand/Havells)

Fixing only MCB SPN 6-32 Amps (Serviceable MCB obtained from item No.52 to 56 shall be reused) complete all as specified and directed.

S&F MCB in replacement SP, 6-32 Amps, 240 volt, 'C' Series, 10 kA complete all as specified and directed. ( Make L&T,Cat No.BB10320D or Legrand/Havells)

Fixing MCB SP 6-32 Amps (Serviceable MCB obtained from respective items shall be reused) complete all as specified and directed.

Supply and fixing in replacement of LED Royal Rimless - R is a surface mounted LED panel injection molded in thermally conductive engineered plastic - FR VO grade housing diffuser with high optically efficient material of Capacity 15 watt Complete all as specified and directed ( Make:- Crompton Cat Part No:- LCRP-15-CDL or equivalent in Phillips/Havells/ Bajaj/Wipro.

Supply and fixing 1x10 watt ( 2ft ) LED Batten indoor decorative type robust and high performance giare free extruded Batten with milky white diffuser complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed. ( Make /Model No :-CCS-103-10-65-SL-DP-NWH(TRIMLINE NEU) of Crompton or equivalent in Phillips/Havells/ Bajaj/Wipro )

Supply and fixing High-quality design LED Tube light fittings in extruded aluminium housing with high quality PC diffuser 1x20 watt with enhances safety and relible ,robust housing structure with decorative end caps complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed. ( Make /Model No :- CCS-100-20-65-HL2-DP-NWH(BRIGHT LINEA) of Crompton or equivalent in Phillips/Havells/ Bajaj/Wipro )

Supply & fixing in repair Building security light fitting,new compact designed IP 66, Aluminium PDC housing with toughen glass cover high power LED street light/Building Security light of capacity 25 watt.including provn of necessary connection complete all as specified and directed. (Make/ Model:- Crompton(ASTRA NEO), Cat No . LSTS-25-CDL-M or equivalent in make Phillips/Havells/ Bajaj/Wipro)

Supply & Fix Proxima -R is a high performance low- height back lit downlighter 15 Watt LED suited for any modern professional workspace robust PDC aluminum housing ensures long life Make: Crompton Cat Part No: CDR-205-15-57-SL-NWH or equivalent in make Phillips/Havells/Wipro)

Supply and fixing in repair of GI pipe Bracket of 40 mm dia Medium grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed. (Make of GI Pipe - Jindal/Prakash/Tata)

Supply and fixing in replacement sheet metal encloser box including Plug and socket including 20 Amps MCB (SP) 10 KA, C series complete all as specified and directed. ( Make L&T/Legrand /Havells).

Disconnecting electrical wire from ceiling rose, taking down ceiling fan of any type/size and make, removing substances from bearing, bush by using kerosene oil, carrying out fresh lubrication using grease and to make the ceiling fan noise free for smooth functioning (including replacement of worn-out / unserviceable like capacitor, connector, canopy, bearing, down road, PVC cable etc) assembling the repaired ceiling fan including painting with one coat of synthetic enamel paint of existing colour code including writing MES No with black synthetic enamel paint complete including testing hanging the ceiling fan as its own position, connection with point wiring complete all as specified and directed. (NOTE : Spare parts to be replaced shall be measured and paid separately., as supply only ).

All as per item No. 74 here in before but for exhaust fan 300 mm/380mm sweep.

All as per item No. 74 here in before but for exhaust fan 450 mm sweep.

All as per item No. 74 here in before but for PVC Ventilating fan 200 mm sweep.

M&L for Rewinding of the motor of AC ceiling Fan of any make and size 1200 / 1400 mm sweep with super enamelled copper wire of existing gauge to obtain the specified and satisfactory RPM as per manufacturers specification, including replacement of all insulation materials, varnishing heating, drying, assembling of stator & rotor etc including including painting with one coat of synthetic enamel paint of existing colour code including writing MES No with black synthetic enamel paint and testing complete all as specified and directed.

All as per item No.78 above but for exhaust fan of any make / type and size 300 mm/450mm sweep.

All as per item No.78 above but for PVC Ventilating fans of any make / type and size 200 mm sweep.

Supply only shaft for ceiling fan of size 1200mm complete all as specified and directed.

Supply only PVC holder stand for capacitor of ceiling fan 1200mm sweep complete all as specified and directed.

Supply only ball bearing of any size and type suitable for any type / make / size of ceiling fan complete all as specified and directed. Make : NBC/SKF

All as per item No.83 above but for exhaust fan of any type/make and size (300 /450 mm sweep) .

Supply only capacitor 230 Volts AC 50 HZ and rated capacity 2.5 MFD for ceiling fan complete all as specified and directed.

Supply only capacitor 230 Volts AC 50 HZ and rated capacity 1.25 MFD for ceiling fan complete all as specified and directed.

Supply only capacitor 230V AC 50 HZ and rated capacity 3.15 MFD for exhaust fan complete all as specified and directed.

S&F PVC insulated, sheathed twin twisted stranded copper conductor flexible cable of size 0.75 Sqmm for ceiling fan complete all as specified and directed.

S&F gun metal bush of suitable size for exhaust fan of any type / size as per existing type complete all as specified and directed.

S&F MS hook and clamps MS flat iron of existing size after taking out old rusted hook & clamp etc.for hanging/fixing of ceiling fan including cemented work complete all as specified and directed.

S&F MS anodized bolts with anodized nuts, spring washers split pin etc size 50 mm long 10 mm dia half threaded type with split pin hole for hanging of ceiling fan complete all as specified and directed.

S&F in repairs down rod of suitable size including gromet/ reel type rubber pad with clamp & bolts, nuts and washers suitable for housing ceiling fan complete all as specified and directed.

S&F in repairs louvers shutter made of MS sheet metal 1.2 mm thick for round base and 0.8mm thick for flaps confirming of mounting edges frames made of MS Flat of size 25mmx3mm including heavy duty rust proof passivated bolts, of size 50mm long 8mm dia to be fixed on wall after drilling and duly painted by two coats of synthetic enamelled paint (spray painting) over a coat of primer for exhaust fans up to size 300 - 450 mm sweep complete all as specified and directed.

S&F in repairs of Metallic Fan Blade suitable for Exhaust fan of size 300 mm sweep complete all as specified and directed.

S&F in repairs of Metallic Fan Blade suitable for Exhaust fan of size 450 mm sweep complete all as specified and directed.

S&F in repairs of Metallic Fan Blades suitable for Ceiling fans of size 1200 mm sweep complete all as specified and directed.

Supply only PVC canopy suitable for ceiling fan of any type / make for both end of down rod complete all as specified and directed.

S&F in repairs of PVC plug top of 5 Amps, 3 pin,230 volts complete all as specified and directed. (Make:Anchor/Cona/Roma)

S&F in repairs of PVC plug top of 15 Amps, 3 pin,230 volts complete all as directed. (Make:Anchor/Cona/Roma)

S&F in repairs of Metallic plug top of 20 Amps, 3 pin,230 volts complete all as specified and directed. (Make:L&T/Havells/Legrand)

Supply and Replacement of Incoming cable with 3-core,PVC Stranded copper conductor of sizes 1.5 sq.mm with taking down of old unserviceable incoming cables complete all as specified and directed. Make- Polycab/Finolex/Havells/KEI)

Taking out unserviceable geyser of any make and capacity for necessary repair/replacement including refixing the same in original position after repair including one coat of white synthetic enamel paint including preparation of old surface complete all as specified and directed. (NOTE : spare parts shall be measured and paid separately as supply only under respective item of this schedule)

Supply only PVC connection pipes inner wiremesh type 15mm size of length 450mm hot and cold with both ended brass flare nuts for geyser connection complete all as specified and directed. (Make:Prayag/Marc/Jaquar)

Supply only thermostat with auto cut for setting temperature 0- 90C complete all as specified and directed.

Supply only indicator lamp red/green colour with transparent covers per existing size & shape complete all as specified and directed.

Supply only gun metal safety valve all as per existing size and shape suitable for geyser complete all as specified and directed.

Supply only heating element thread/push type as per existing size & shape of capacity 1.5 KW complete all as specified and directed including taking out of unserviceable one complete all as specified and directed.

All as per Item No.107 above but of capacity 2.0 KW.

Repair to copper tank or capacity 25/50 ltrs capacity geyser of any make/type at rusted portion of the tank by gas welding/brazing with copper rod electrode including refixing of all other accessories and rubber gasket complete all as specified and directed.

S&F Anchor bolts of sizes 8.0 mmX100 mm for installations of Geyser of any make and capacity complete all as specified and directed.

S&F Anchor bolts of sizes 10 mmx100 mm for installations of Geyser of any make and capacity complete all as specified and directed.

Repair / Maintenace/servicing of Aquagard/KENT/USHA RO water purifier, segregation of unserviceable & serviceable components, supply & fixing of new spare parts in place of unserviceable items if required such as PCB, Filter, Carbon, Solenoid-Valve, UV Lamp, photo resistor and other minor spare parts, refixing of serviceable spare parts and re assembling complete all as specified and directed.

Supply and fixing in replacement of RO Water purifier Membrane of suitbale capacity of RO Make : Kent/Usha/Aquaguard complete all as specified and directed.

Supply and fixing in replacement of RO Water purifier Circulating Motor of suitable capacity of RO make : Kent/Usha/Aquaguard complete all as specified and directed

Supply and fixing in replacement of RO Water purifier connection pipe of size 1/4" complete all as specified and directed.

Supply and fixing in replacement of RO Water purifier connection pipe of size 3/8" complete all as specified and directed.

Supply and fixing in replacement RO Water purifier connection pipe of size 1/6" complete all as specified and directed.

M&L Earthing with galvanized steel earth plate electrode of size 60cm x 60cm x 6 mm thick,buried directly in ground(earth pit not less than 2.25 meters deep below ground Level) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanised Iron Wire of size 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers etc, GI earth lead strip duly protected by 40 mm dia GI pipe (light grade) and 20 MM GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work in soft/loose soil and disposal of soil to a distance not exceeding 50 Mtrs, PCC (1:3: 6) type C1 as in concrete pit,50mm thick precast RCC (1:1.5:3) type A1 as in cover slab duly reinforced with 8 mm dia TMT bar @ 100 mm c/c both way and two nos lifting handle made cut of 10 mm dia TMT bar and set in cement mortar (1:4), testing etc complete and as specified in electrical plate No 3 of SSR part-I including taking down old earthing plate & GI Wire

M&L Earthing with galvanized steel earth plate electrode of size 60cm x 60cm x 6 mm thick,buried directly in ground(earth pit not less than 2.25 meters deep below ground Level) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanised iron strip size 25 mm x 4mm as earth lead by means of bolts, nuts, check nuts and washers etc, GI earth lead strip duly protected by 40 mm dia GI pipe (light grade) and 20 MM GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work in soft/loose soil and disposal of soil to a distance not exceeding 50 Mtrs, PCC (1:3: 6) type C1 as in concrete pit,50mm thick precast RCC (1:1.5:3) type A1 as in cover slab duly reinforced with 8 mm dia TMT bar @ 100 mm c/c both way and two nos lifting handle made cut of 10 mm dia TMT bar and set in cement mortar (1:4), testing etc complete and as specified in electrical plate No 3 of SSR part-I including taking down old earthing plate & strip.

S&F in repairs Earth Continuity conductor or main earthing Lead fixed to wall or batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situations for earthing etc. as required 4.0 mm galvanized iron wire .

S&F in repairs Earth Continuity conductor or main earthingstrip fixed to wall or batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situations for earthing etc. as required 25x 4.0 mm dia galvanized iron strip.

Supply & fix LED Recessed full lit luminaire with glare free uniform illumination with longer life and less maintenance 36 Watt 2x2 LED Fitting Complete all as Specified and directed Make Crompton Cat Part No:- LCTLRNE-36-FO- CDL/Havells/Phillips/ Bajaj.

S&F Modular switch 2 way 6A, 1 module complete all as specified and as directed.

Rekha Enterprises

SMART ENERGY SOLUTIONS

SWAIN ENGINEARING

M/S T.N.CONSTRUCTION