REPAIR TO ROOF TREATMENT, LEAKAGE / SEEPAGE TO TOILET, CLEANING OF WATER TANK AND REPAIR TO HANGER DOORS AND ROLLING SHUTTERS IN TECH AREA, RAIN WATER PIPES, RAFTER, PURLIN TRUSS UNDER GE(AF) BAMRAULI

Amount

Demoliton of cement concrete (un reinforced) of any description and in any position not other wise specifically provided for complete all as specified and directed.

Taking down cement plaster or cement lime plaster of any description including racking out joints, haking for key , scrubbing down with water etc and prepare to receive new plaster complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars etc from parapete etc and removal unserviceable brick/brick bats complete all as specified and directed.

M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 as in parapets etc complete all as specifed and directed.

M&L for rendering 15mm thick in cement mortar (1:6), on fair faces or brick work or concrete surfaces, finished even and fair etc complete all as specified.

M&L for rendering 15mm thick in cement mortar (1:4), on fair faces or brick work or concrete surfaces, finished even and fair and mixed with water proofing compound @ 200ml per 50 Kg weight of cement (1 Bag). (Note: WPC will be measured and paid separately).

M&L for 10 mm thick rendering in CM (1:3) on fair faces of brick work or concrete surface of Chajja, roof Projection & slab etc ceiling surfaces finished even and fair including taking down old ceiling plaster ht upto 7-8 mtr etc complete all as specified.

M&L for 5mm thick rendering in CM (1:3) on fair faces of brick work or concrete ceiling surfaces finished even and fair including taking down old ceiling plaster etc complete all as specified.

M&L for two coats of cement base paint over cement wash with white cement including preparation of new surfaces of walls complete all as specified and directed by Engr-in-Charge.

M&L for preparing newly plastered surfaces of wall and applying three coat of white wash etc complete all as specified.

M&L for preparing newly plastered surfaces of ceiling surfaces and applying three coats of white wash etc complete all as specified and directed.

Demolition of Mud/mud puska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Dismantling of brick tiles laid bedded and pointed in any morter or brick tiles on roof , floors, channels, kerbs, aprons etc,cement concrete of any description & in any position not otherwise specifically provided for.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof padding, benching existing roof slab to slope as per existing or as directed.

M&L for screed bed of 10mm thick in cement mortar (1:4) cover concrete surfaces of roof, mixed with @ 200ml liquid water proofing compound by 50Kg weight of cement (1 bag) as per manufacturerrs instruction inclduing finishing surfaces even and smooth without using extra cement complete all as specified and directed. (WPC shall be measured and paid separately). (Note: WPC will be measured and paid separately).

M&L for cleaning the roof surfcae from dust /dirt and any other foreign materials and apply as under (a) Applying a coat of bituminius primer @ 0.30 liters per square meter uniformity after the surfaces fully dried complete (b) M&L for applying a coat of hot blown bitumen of grade 85/25 conforming to IS 702 over APP Membrane @ 1.20 Kg/Sqm complete all as specified and directed.all as specified and directed. (c ) M & L for APP based polymeric water proofing membrane minimum weight 3.6 Kg/ Sqm and minimum 3mm thick reinforced with polyster non wove fabrick (Weight not less than 150gms/Sqm or as per IS), laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor. Membrane shall be laid with 100mm side/end lap on prepared surface as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer.

M&L for Cement concret tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished laid over roof treatment, laid over and including 15mm thick screed be din cement mortar (1:6) mixed with and including polymer based liquied water proofing additive @ 200ml liquid water proofing compound by 50Kg weight of cement (1 bag) or as per manufacturers specification and joints of brick tiles shall be filled with cement mortar (1:4) mix with and including 5% curde oil complete all as specified and directed.

M&L for two coats of aluminium paint on APP based polymeric water proofing membrane 0.1 Ltr/Sqm in each coat including preparation of surfaces of roof etc complete all as specified and directed by Engr-in-Charge.

M&L for cutting out cracks to V section in existing roofs or terrace, cleaning out and filling solidly with a hot mixture of bitumen and clen dry sand (1:1) (by weight) complete all as specified and directed.

Supply only liquid integral water proofing compund. Make Dr Fixit Pidipfoor LW+.

M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in cills bencing and other similar bands, plinth courses, parapets, coping bed plates and the like inclduing weathering, slightly rounded or chamfered angles and throating finishing surface even and smooth as directed inclduing use and waste of form work complete all as specified and directed.

S&F in repairs stack clamps for 110mm bore of pipe made out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stay to wall or roof etc with PCC (1:2:4) type B-1 of 100x100x100mm complete all as specified.

S&F in repair 0.63 mm th plain galvanised sheeting fixed on crumple joints fixed with screw on wall/ roof as required complete all as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position exc 250 ltr n.exc 500 ltr cap etc complete all as specified and directed.

Demolition of RCC 500/1000 ltr water tank of any description and in any position not otherwise specifically provided for all as specified.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling water tanks all as specified.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling water tanks all as specified.

S&F 20mm dia ball valves high pressure of with epxy coated aluminium rod and high density plastic ball screwed for iron pipe and all as specified.

S&F for 20mm dia Gun-metal, globe or gate valves,with iron wheel screwed both ends for iron pipe or for unions and fixed in repair.

S&F for 25mm dia Gun-metal, globe or gate valves,with iron wheel screwed both ends for iron pipe or for unions and fixed in repair.

Taking up or down steel water tubing galvanised and removing to store 15 mm dia

Taking up or down steel water tubing galvanised and removing to store 20 mm dia

Taking up or down steel water tubing galvanised and removing to store 25 mm dia

S&F 15mm dia medium grade galvanized water tubing with all necessary fittings and fixed complete walls.

S&F 20mm dia medium grade galvanized water tubing with all necessary fittings and fixed complete walls.

S&F 25mm dia medium grade galvanized water tubing with all necessary fittings and fixed complete walls.

Refixing old steel tubing 15mm bore and connections in new or old position (Walls, ceiling, floors, etc.) and all as specified.

Refixing old steel tubing 20mm bore and connections in new or old position (Walls, ceiling, floors, etc.) and all as specified.

Refixing old steel tubing 25mm bore and connections in new or old position (Walls, ceiling, floors, etc.) and all as specified.

S & F in repair of PVC tank cover for 500 to 1000 Ltr capacity matching with PVC tank cover with existing tank at the site complete all as specified and directed

Cleaning of overhead tank by removing all scale and dirt etc from RCC/PVC tank from mouth of circulating pipe etc to the entire satisfaction of engineer in charge ( Capacity exceeding 250 ltr and not exceeding 500 Ltr including writing date of cleaning of each tank removing tank cage and refixing where ever required complete.

All as item No. 47 but exceeding 500 L not exceeding 1000 Ltr capacity complete all as specified and directed.

Supply and fixing repair ball valve of 25mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screw for iron pipe and fixed complete all as specified and directed.

M&L for water proofing treatment for existing sunken portion by complete demolition of existing leakage sunken portion area exc 1 Sqm but n. exc 1.5 Sqm and cleaning the surface and applying cement slurry and 10mm thick cement plaster in CM 1:3 mixing with liquid water proofing compound after surface is fully dried, cleaned free from dust and painting with a coat of bituminous primer@ 0.3 liter / Sqm after primer the entire surface, applying with hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2Kg / Sqm, over hot bitumen, providing polymeric water proofing membrance consisting of 90 to 100 micron thick central core of HMHDPE fill with standard weight not less than 3Kg/Sqm provide with 100mm side lap/end lap after that fixing P trap and filling sunken portion in PCC 1:5:10 type E-2 appox 30cm high and PCC 1:2:4 type B-1 using 20mm graded stone aggregate including demolition, supply & fixing new vitrious china Wated Closet pan orrisa pattern, size 580x440mm with integral foot rest excluding flushing cistern & flush pipe complete all as specified and directed. Note : (i) Rate quoted by the contractor shall deemed to be included for testing of treatment as directed by Engineer in Charge.

M&L for taking down cement plaster incl tiles etc and removing the material out side MD land.& hacking out and racking out the joints with the wire brush to dry and apply one coat of URP and cement in ratio 1:1 @ 1liter per Sqm. After the drying of this process two coat of pidifin2K @ 01 liter on each coat min 4 hour gap is required and 15 mm thick rendering in CM 1:4 in roof/ wall complete incl finished even & smooth without using extra cement all as directed.Note: Make of chemical to Dr.Fixit.Gauranty to be required from the Dr Fixit.

Dismantling floor hearth or wall tilling including cement mortar bedding , removing unserviceable tiles and rubbish off the premises for minor repair to floor tiles/ nahani traps / concealed stop cock and GI tubing in wall etc in patches.

S&F for non skid ceramic coloured tiles 300mmx300mmx 8 to 10 mm thick in floor set and jointed less neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for glazed ceramic coloured/ designer tiles including highlighter on verticle surface of size 300X450X 8 to 10 mm thick set and jointed with cement slurry and pointing in white cement to match over and including 10mm thick backing in cement mortar 1:4 in skirting / dado complete all as specified and directed.

Taking down soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, bends etc.

S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls .

S&F PVC (SWR) 75mm bore pipes single socketed in any length with rubber ring joints laid in trenches or in floors.

S&F 110mm bore PVC (SWR) bends any radius.

S&F 75mm bore PVC (SWR) bends any radius.

S&F for PVC (SWR) Junction single (Single T) equal or unequal of 110mm with access doors etc

S&F for PVC (SWR) Junction single (Single T) equal or unequal of 110mm.

M&L for PVC (SWR) floor trap 75 mm dia of outlet with stainless steel grating including jointing to waste pipe in run led joint complete all as specified and directed.(fixed in replacement)

S&F in reapir PVC (SWR) vent cowl of size 110mm dia.

S&F (in repair) vitreous china squatting pan Orissa Pattern size 580x440mm white with integal foot rest (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement concrete complete all as specified and directed.

S&F 10 litres capacity PVC valve less, symphonic action type flushing cistern; low level, white, with inlet, ball valve, float and handle including bracket

S&F 15 mm bore stop/angle valve ISI marked, cast copper alloy, screwed down, high pressure,CP fancy type handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F CP 15 mm dia bib tap cast copper alloy with fancy type handle screwed down, screwed for iron pipe complete all as specified and directed.

Supply and fixing PVC connection 600 mm long with brass coupling on both end suitable for 15 mm bore of pipe all as specified and directed.

Material and labour for flush pointing in cement mortar 1:3 on roof tiles including racking out joints etc complete all as specified and directed.

M&L for Repair to existing hanger sliding door shutter, each leaf of size n exc 2.50 M (clear width) 7.00 to 8.5 M (clear height), straightening of worn-out top & bottom rails,replacing unserviceable rollers,tightening/replacing the loose nut and bolts, necessary /required welding, replacement of broken locking arrangement oiling, greasing etc and positioning of door shutter in same opening for smooth functioning of hanger door shutter complete all as specified and as directed.

M&L for Cleaning/greasing/oiling of hanger wheel track at top of any description,welding of members if required tightening of screws/nuts,bolts of door and wheels etc including rectifying the alignment of top guide channel/rail/ angle etc complete for smooth functioning of hanger doors all as specified and as directed. Note: The periodicity of Cleaning and Greasing/Oiling shall be as required by the airforce authorities.

M&L for Cleaning/greasing/oiling of hanger wheel track at bottom of any description,welding of members if required tightening of screws/nuts,bolts of door and wheels etc including rectifying the alignment of bottom guide channel/rail/ angle etc complete for smooth functioning of hanger doors all as specified and as directed. Note: The periodicity of Cleaning and Greasing/Oiling shall be as required by the airforce authorities.

S&F Rolled mild sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 Gde E-165 including dismantling wrought iron or mild steel work of any description and in any position including doors, gates etc. all as specified and as directed.

M&L for Welding in repairs, exc 2.5 cm but n exc 5 cm in length with thickness of metal to be welded n exc 6 mm all as specified and as directed by Engr-in-charge.

S&F rolled mild steel of grade Fe-290 (Grade E-165) in framed work as in doors or gates of angle or other section with gusset plates, rails braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

M&L for oiling and greasing to pullies of each steel sliding hanger doors, cleaning with using standard thinner such as carbon tetra chloride/ Benzeen and making smooth functioning to reduce the friction of door complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Dismantling ofstructuralsteel workincluding doors gates, post trusses or struts rafter ,purlins,structure steel any section etc ( etc All as specified by Engr-in -Chagre

Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc(Fe 410-W(Gde E-250) quality-A ) etc complete all as specified and directed.

S&F Mild screw bolt Machine made with hexagonal or square head at one end and scewed at another end or screwed at both end to be fitted with washer exc 10cm and n exc 15 cms long of shank dia 16 mm to 20 mm

M&L for Pre-painted galvalume aluminium zinc coating 275 GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L for Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Supply and fixing vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed . including plastic water closetseat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device

S&F chromium plated fancy type Hand Jet spray (Health faucet).

Disconnecting existing tanks exc 500 but n exc 1000 ltr , setting aside (or lowering if required) for repairs, cleaning, etc. And hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. Measured separately)

M&L for Repairing only for Leakage of Rotational moulded polythene three layer water storage tanks position 500ltrs capacity including disconnecting the tank with rapair the leakage portion using M seal, 2Nos of 20 to 25mm GI union and checked nut etc complete all as specified and directed.

Dismantling of cast iron or renforced drain pipe 100mm/75mm dia of any description complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe100 mm dia in any length with or without ear, with cement joint, laid in trenches or in wall complete all as specified.

S&F 100 mm cast iron sanitary connection socket to fit wc out let complete all as specified and directed.

S&F 100 mm cast iron sanitary connection S branch with branch 370 to 450 mm long excluding joint complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).

S&F 75 mm PVC (SWR) junction single, (singl T ) (equal or unequal ), ordinary or inverted (spigot or socket type) or with paralle oval access doors branches .complete all as specified and directed.

M&L for PVC(SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified directed.

S&F stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 75 mm complet all as specified and directed.

M&L for PCC 1:3:6 type B-1(using 20mm graded stone aggregate) for providing cement concrete as levelling and roof kerbs or mud stops, including finishing the surface with grinder to receive the acrylic based water proofing material, rounded or chamfered on edges etc complete all as specified and directed.

M& L for cement concrete type E2 1:5:10 (40mm graded stone aggregate) as lean concrete in filling / Mass concrete complete all as specified and directed

M & L Preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint), complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in Charge.

M&L for preparation of old painted Steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed by the Engineer-in-Charge.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.

HIMANSHU TRADERS

Aditi Construction Company

M/S Aquarius Construction

M/S Rakesh Singh

M/S SATISH KUMAR

FRIENDS N FRIENDS

Pleiad Complex On