REPAIR/ MAINTENANCE OF INTERNAL ELECTRIFICATION OF OTM AND MD ACCN, REPAIR RENEWAL OF EXTERNAL ELECTRIC CABLES LT PANELS, REPAIR / REPLACEMENT OF OLD UNSERVICEABLE FAN AND GEYSER AND REPAIR MAINTENANCE OF STREET LIGHT DG SETS AND GARDEN LIGHTS AT GHA

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials out side MD land after Credit for the same is recovered by the dept and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Material and labour for submain wiring complete with and including 2 runs of 6.0sqmm, single core FRLSH, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including non metallic PVC conduit, heavy duty of suitable size, not less than 25mm dia, including accessories etc as required and fixed on walls and 6.0sqmm single core FRLSH PVC multistranded copper conductor cable for earthing and connected to common earth dolly for housing the wires from Main DB TO SPN DB including taking down the existing submain wiring complete all as specified directed by Engr in Charge. Note: 1. Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. 2. Two runs of 6.0sqmm PVC insulated cable and one run of 6.0sqmm cable and one run of PVC conduit/ casing capping shall be measured as one unit length. Make of Cable-Plaza, Finolex, Havells, Polycab, Benlo Make of PVC conduit/Casing Capping-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme

Material and labour for submain wiring complete , concealed type, with and including 2 runs of 4.0sqmm, single core FRLSH, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including non metallic PVC conduit/, heavy duty , 25mm dia including accessories etc as required and fixed on walls and 4.0sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of 4.0sqmm PVC insulated cable and one run of 4.0sqmm cable and one run of PVC conduit/ casing capping shall be measured as one unit length. Make of Cable-Plaza, Finolex, Havells, Polycab, Benlo Make of PVC conduit/Casing Capping-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme

Material and labour for Point wiring for complete with PVC insulated FRLSH cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5 sqmm (nominal area) ( Phase- R, Y , B, Neutral- Black), drawn through and including non metallic PVC casing / capping (not less than 20mm wide) (ISI marked) and accessories on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor (green colour) and connecting to common earth dolly complete all as specified and as directed for one light / exhaust fan/ wall fan point controlled by one, one way switch complete all as specified and as directed by Engineer-in-Charge. Make of Cable- Anchor/ havells/finolex /Polycab/Plaza/Benlo of ISI mark as approved by GE Make of PVC Casing Capping-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme

All as per item No.4 here-in before but for one bell point, controlled by bell push

All as per item No.4 here-in before but for one fan point controlled by one, one way switch & regulator

All as per item No.4 here-in before but for one light point controlled by 2, two way switches

All as per item No.4 here-in before but One 3 pin, 5/6 Amps socket point on the independent board controlled by one, one way switch.

All as per item No.4 here-in before but for one 3 pin, 5/6 Amps socket point, on same board with other switches controlled by one, one way switch.

All as per item No.4 here-in before but for 3 pin 15/16 Amps socket point , on independent board with 2.5sqmm copper cable and provision of 2.5sqmm PVC insulated, FRLSH cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Point wiring for complete with PVC insulated FRLSH cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5 sqmm (nominal area) ( Phase- R, Y , B, Neutral- Black) drawn through and including (medium grade) rigid non metallic PVC conduit pipe not less than 20 mm size ISI marked with conduit accessories / fittings / junction box / inspection covers etc of ISI marked and cutting chases for concealed conduit with all surfaces by means of screws and sunk / cup washers, fabricated terminal box made out of PVC, with 3mm thick PVC sheet, ISI marked, top cover with brass/ chromium plated screws and cup washers for housing switches, socket outlets, fan, regulators etc for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLSH cable 1100 volts grade with multi stranded copper conductor 1.5 sqmm as earth continuity conductor (green) and connecting to common earth dolly all as specified and as directed for one light /ceiling fan/ exhaust fan point, controlled by one, one way switch complete all as specified and as directed by Engineer-in-Charge. Make of Cable- Anchor/ havells/finolex /Polycab/Plaza/Benlo of ISI mark as approved by GE Make of PVC conduit-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme

All as per item No.11 here-in before but 5/6 Amps socket outlet point on the independent board controlled by one, one way switch.

All as per item No.11 here-in before but for one 5/6 Amps socket oulet point, on same board with other switches controlled by one, one way switch.

All as per item No.11 here-in before but for bell/buzzer point controlled by 1 one, one way bell push

All as per item No.11 here-in before but for 3 pin 15/16 Amps switch socket point , on independent board with 2.5sqmm copper cable and provision of 2.5sqmm PVC insulated, FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings, on the independent board controlled by one, one way switch, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Switch Piano, flush type, single pole, one way, 5 Amps, 240 volts, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/.Crabtree/Leader/Benlo

Supply and fix in repairs Switch bell push, flush type, single pole, one way, 5 Amps, 240 volts, ISI marked complete all as specified and as directed. Make: Anchor / Legrand / Havells/.Crabtree/Leader/Benlo

Supply and fix in repairs switch socket outlet, combination 2 in 1, 5 Pin, 5 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/.Crabtree/Leader/Benlo

Supply and fix in repairs switch socket outlet, combination 5 in 1, 3 Pin, 5/15 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/.Crabtree/Leader/Benlo

Supply and fix in repairs stepped type electronic fan regulator,100W, 230 V etc complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/.Crabtree/Leader /Benlo

Supply and fix in repairs modular fan regulator AC, 230 volts , 100 watts (2 module), electronic type, deluxe (stepped type) complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/.Crabtree/Leader /Benlo

Supply and fix Modular type switch, single pole, one way, 6 Amps, 1 module, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make:Anchor / Legrand / Havells/.Crabtree/Leader /Benlo

Supply and fix Modular socket outlet, 2 module, 2 in 1, 2/ 3 Pin combined, 6 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/.Crabtree/Leader /Benlo

Supply and fix Modular type switch, single pole, one way, 16 Amps, 1 module, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make:Anchor / Legrand / Havells/.Crabtree/Leader /Benlo

Supply and fix Modular socket oulet , 2 module, 2 in 1, 2/ 3 Pin combined, 6/16 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/.Crabtree/Leader/Benlo

Supply and fix ceiling rose, 3 plate, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge. Make: Legrand /crabtree/ Honeywell/ Anchor/Benlo

Supply and fix angle holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix Call bell electric (Ding Dong type) suitable for working on 230 volts AC supply multi music type complete all as specified and as directed. Make: Anchor / Legrand / L&T

Supply and fix surface in repairs mounted 4 ft, 20 watts LED tube light fitting ,ultra slim square profile LED lighting fixture with extruded aluminium, energy efficient light fitting, internally prewired and connecting up with copper 3 core flexible cord of minimum size 0.5 sqmm from ceiling rose to fitting complete all as specified and as directed by Engineer-in-Charge. Make : Philips/crompton/Bajaj/Havells./Benlo

Supply and fix surface in repairs mounted 2 ft, 10 watts LED tube light fitting ,ultra slim square profile LED lighting fixture with extruded aluminium, energy efficient light fitting, internally prewired and connecting up with copper 3 core flexible cord of minimum size 0.5 sqmm from ceiling rose to fitting complete all as specified and as directed by Engineer-in-Charge. Make : Philips/crompton/Bajaj/Havells./Benlo

Supply and fix in repairs recess mounted LED ceiling light fitting, 600mmx600mm, 35/36w, 230v, 50Hz with diffuser suitable for indoor units complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable fixed on the false ceiling with necessary cutting of false ceiling wherever necessary etc complete all as specified and directed by Engineer-in-Charge-in-Charge, Make : Philips/Bajaj / CG / Havells/Benlo

Supply and fixing in repair LED street light / building security light fitting 35 Watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency minium 100 luman per watt after all losses , pressure die-cast aluminium housing LED Street light complete with GI clamp including connected accessories and bracket made of GI Pipe light grade, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers etc. complete all as directed by Engineer-in-Charge. Make Wipro/Bajaj/ Havells.

Supply and fix in repairs sheet metal enclosures, double door, for DBs when MCBs to be used 240 volts 8 way with 200 Amps rated bus bar, single pole and neutral , fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Make: Havells / Legrand / L&T/Benlo

Supply and fix in repairs sheet metal enclosures, double door, for DBs when MCBs to be used 240 volts 4 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Make: Havells / Legrand / L&T/Benlo

Supply and fix in repairs MCB SP 6-32 Amps, 240 volts, 10KA 'C' curve complete all as specified and as directed by Engineer-in-Charge. Make :Legrand / L&T / Havells/Benlo

Supply and fix in repairs MCB SPN 40-63 Amps, 240 volts, 10KA 'C' curve complete all as specified and as directed by Engineer-in-Charge. Make :Legrand / L&T / Havells/Benlo

Material and labour for earthing complete with Galvanised steel earth plate electrode 60cm X 60cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to plate with 25 x 6mm GI earth strip, 7.5m long from earth point to test point and other end connected to control board / panel / equipment, laid under floors/plinths or fixed on walls or concealed in wall etc by means of bolts, nuts, check nuts and washers made out of galvanized iron or steel with provision of charcoal & common salt not less than 50Kg & Benzonite powder 20 Kg in each earthing packed up to maximum 30 cm on both side of plate and GI strip protected by 40mm bore light grade galvanized iron pipe complete all as shown in electrical plate No. 3 of MES schedule Part I, 2009 with PCC 1:3:6, type C1 in chamber wall with CI cover and frame, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh and engraving of earth marking on nearby structure/ building with cement mortar 1:4 plate of size 200mm x 150mm x 15mm thick including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Contractor should submit test report of earthing after installation to Engineer -in-Charge

Material and labour for Earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to and including galvanised earth lead wire 4 mm dia, 7.5m long, duly protected by 15mm dia light grade GI pipe upto test point terminal block by means of bolts, nuts, check nuts and washers made out of galvanized iron or steel with provision of charcoal & common salt not less than 50Kg, Benzonite powder 20 KG in each earthing packed upto maximum 30 cm on both side of plate for reducing the earth resistance complete and GI wire protected by 15mm bore light grade galvanized iron pipe complete all as shown in electrical plate No. 3 of MES schedule Part I, 2009 with PCC 1:3:6, type C1 in chamber wall with CI cover and frame, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh and engraving of earth marking on nearby structure/ building with cement mortar 1:4 plate of size 200mm x 150mm x 15mm thick including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Contractor should submit test report of earthing after installation to Engineer -in-Charge

Material and labour for earthing complete with Galvanised steel earth plate electrode 60cm X 60cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to plate with 32 x 6mm GI earth strip, 7.5m long from earth point to test point and other end connected to control board / panel / equipment, laid under floors/plinths or fixed on walls or concealed in wall etc by means of bolts, nuts, check nuts and washers made out of galvanized iron or steel with provision of charcoal & common salt not less than 50Kg, Benzonite powder 20 KG in each earthing packed upto maximum 30 cm on both side of plate for reducing the earth resistance complete and GI strip protected by 40mm bore light grade galvanized iron pipe complete all as shown in electrical plate No. 3 of MES schedule Part I, 2009 with PCC 1:3:6, type C1 in chamber wall with CI cover and frame, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh and engraving of earth marking on nearby structure/ building with cement mortar 1:4 plate of size 200mm x 150mm x 15mm thick including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Contractor should submit test report of earthing after installation to Engineer -in-Charge

Material and labour for earthing earthing with GI plate 600mmx600mmx6mm thick, burried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level, connecting to GI plate with 32x6 mm GI earth strip upto 7.5 Mtr long from earth point to test point by means of bolts, nuts, check nuts, washers and provision of charcoal, salt & Benzonite powder 20 Kg in each earthing etc including watering arrangement with 15 mm dia GI medium grade pipe, and 40mm dia GI pipe for protection of GI strip ,MS funnel, PCC chamber in cement concrete 1:3:6 type C1 and finished even and smooth without using extra cement, 50 mm thick RCC cover 1:2:4 type B1 including 10 mm dia deformed bars @100 mm c/c on both ways for full size of chamber complete all as per electrical plate No 3 including necessary excavation and earth work in any type of soil complete all as directed. Note :- (i) Contractor should submit test report of earthing after installation to Engineer -in-Charge

Material and labour for Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in deep for foundation, laying pipes etc or for shaft, walls, manholes, pier holes etc not exceeding 10 sqm on plan and not exceed 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed by Engineer-in-Charge

-do- same as Item no. 41 above but depth exc 1.5m and n exc 3.0m

Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm in soil complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge

Supply and lay double wall corrugated (DWC) HDPE pipe 63mm outer dia , as per IS-16205 including couplers and bend for cable protection laid in trenches etc complete all as specified and as directed by Engineer-in-Charge Make : TELEREX 450N/ Rex Polyextrusion Ltd/ Finolex/ Prince Pipes and fittings ltd/Kisan/Supreme/JAIN IRRIGATION SYS/ Astral

Supply and lay double wall corrugated (DWC) HDPE pipe 40mm outer dia , as per IS-16205 including couplers and bend for cable protection laid in trenches etc complete all as specified and as directed by Engineer-in-Charge Make : TELEREX 450N/ Rex Polyextrusion Ltd/ Finolex/ Prince Pipes and fittings ltd/Kisan/Supreme/JAIN IRRIGATION SYS/ Astral

Supplying, laying,connecting, testing & commissioning LT UG XLPE insulated, heavy duty, 1100 V grade electric cable with aluminium conductor, served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of size 50 Sqmm x 3.5 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-Charge of following sizes:- Note : Earthwork excavation, DWC/GI pipe for cable protection shall be measured and paid separately in their respective items Make: Cable Corporation of India (CCI)/ Asian Cable Co, Chattisgarh/ Finolex/ Polycab/ Gloster/Universal/ RPG Cables Ltd , Thane/ Havells India Ltd/ RR Kabel/ KEI Industries Ltd(KEI)

-do- same as Item no. 47 above but of size 95 Sqmm 3.5 Core

-do- same as Item no. 47 above but of size 70 Sqmm 3.5 Core

-do- same as Item no. 47 above but of size 185 Sqmm 3.5 Core

-do- same as Item no. 47 above but of size 10 Sqmm 4 Core

-do- same as Item no. 47 above but of size 16 Sqmm 4 Core

Supply and fix GI strip 32mm X 6 mm buried in ground/on wall, extension of existing earthing lead complete all as per specified and directed by Engineer - in - charge.

Material and labour for cutting the existing Bitumen Road /hard standing to size not exceeding 45cm wide and depth not less than 45cm for passing of UG cable through GI pipe and making good the disturbed surface filled with excavated material and top 200mm depth with plain cement concrete 1:3:6 type C2 using 40mm graded aggregate complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repairs galvanised iron pipe, medium grade, 80mm bore for cable protection on wall, trenches, road crossings etc. with suitable size of GI saddle, wherever necessary complete all as specified and as directed by Engineer-in-Charge. Make: Tata/ Jindal/ BST/ Surya/ KS Engineering/ Zenith/ Swastik/ Prakash

Supply and fix in repairs galvanised iron pipe, medium grade, 50mm bore for cable protection on wall, trenches, road crossings etc. with suitable size of GI saddle, wherever necessary complete all as specified and as directed by Engineer-in-Charge. Make: Tata/ Jindal/ BST/ Surya/ KS Engineering/ Zenith/ Swastik/ Prakash

Material & Labour for painting the old Main LT panel board including scrapping and removing the old painted surfaces and painting /matching the same colour paint with two coats of super enameled paint ( Smoke grey) and without distrubing the existing electric system all as specified and directed by Engineer-in-Charge. Make : Asian Paints/ Nerolac Paints/ Dulux ( Akzonobel)/ Nippon Paint India Pvt Ltd

Material & Labour for labour for welding broken doors of LT Panel (front and rear door) including replacing the required new hinges, nuts and bolts, locking arrangement and refixing the covers without disturbing the existing electric system complete all as specified and directed by Engineer-in-Charge.

Supply and erect 7 meter long hot dipped galvanised OCTAGONAL street light pole with one single light bracket for street light, the bottom of Pole shall be 130mm dia and top shall be 70mm dia with 3mm thickness, high tensile strength confirming to BS EN 10025. Base plate shall be 220x220x12mm with 4 Nos of anchor bolt 'J' type 700mm long 20mm dia with nut, washer and bolt shall be inserted to RCC footing. The pole shall have internal in built Junction box including 3 phase busbar and one 6 Amp MCB complete including necessary earth work excavation in hard/dense soil, PCC 1:4:8 for foundation, RCC M-20 concrete footing with reinforcement, formwork etc complete all as per mafucturer's instructions and as directed by Engineer-in-Charge. Note: (i) The unit quoted rate shall deem to be included for earth work excavation in hard/dense soil, PCC 1:4:8 for foundation, RCC M-20 concrete footing with reinforcement & formwork. Make- Bajaj/ Utkarsha India/ Bombay Tubes & Pole Co.

Material and labour for undusting & cleaning of feeder pillars & LT panel with dry, lint-free cloth or a soft brush to eliminate dust, dirt, and debris from the panel's surface externally & internally comaprtment wise along with replacing of any unservceable MCCB/ Lugs/ Cables, refixing loose wires/ cables, redistrbution of load for balanced distribution, painting corroded areas, including cleaning of vegatation/plants around Feeder pillars and writing respective Fedder pillar Numbers,complete all as specified and directed by engineer Incharge. Note : MCCB/ Timer/ Cables will be paid and measured seperately.

Supply & Fix in repair DB vertical type 4 way TPN , double door load line powder coated complete alongwith 200 Amp rated Bus bar fixed on wall duly grouted in solid block wall or on wooden board,including MCB TPN 100 Amps incoming and 12 Nos of MCB SP of 40 Amp outgoing with lugs/thimbles duly crimped for connection with all necessary fixing arrangement complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB. Make : Havells / Legrand / Schneider / MDS/Benlo sample as approved by GE.

Supply & Fix in repair MCCB 3 Pole, 415 V, thermal & magnetic adjustable type, 250 Amps with breaking capacity 36 KA with extended copper terminals including all connections & testing complete all as specified and directed by Engineer In charge Make : L&T/ Scheneider/ Siemens/Benlo

Supply & Fix in repair MCCB 3 Pole, 415 V, thermal & magnetic adjustable type, 63 to 100 Amps with breaking capacity 16 KA with extended copper terminals including all connections & testing complete all as specified and directed by Engineer In charge Make : L&T/ Scheneider/ Siemens/Benlo

Supply & Fix in repair MCCB 4 Pole, 415 V, thermal & magnetic adjustable type, 100 Amps with breaking capacity 16 KA with extended copper terminals including all connections & testing complete all as specified and directed by Engineer In charge Make : L&T/ Scheneider/ Siemens/Benlo

Supply and fix in repairs of Voltmeter, 0 to 500 Volts, AC, suitable for three phase, digital type all as directed. Make: AE/Schneider/L&T

Supply and fix in repairs of Ammeter, digital type, 0-300 Amps, AC CT operated, suitable for three phase all as directed. Make: AE/ Schneider/ L&T

Supply and fix outdoor 1.1 KV LT XLPE cable Heat Shrink staright through jointing kit of cable size 150- 185 Sqmm including cable finding cable fault complete all as specified and as directed by Engineer-In-Charge. Make: Densons/ M Seal/ Raychem/ Siemens / Birla 3M/ Mahindra & Mahindra

Material & Labour for sticker for LT Danger notice plate of size 20cm x 15cm , with letters, figures and conventional skull and bones in signal red colour of approved size complete all as specified and as directed by Engineer-In-Charge.

Material & Labour for sticker for HT Danger notice plate of size 25 x 20 cm , with letters, figures and conventional skull and bones in signal red colour of approved size complete all as specified and as directed by Engineer-In-Charge.

Material and labour for complete removal of existing paint of steel tubular / rail poles length up to 9 mtr after scraping out old paint by emery paper/ wire brush and painting with two coats of aluminium paint over a coat of red oxide primer and numbering of poles with white paint on black paint base and stripping with black paint (100 mm each strip) 3 Nos at equal distance from bottom (above PCC coping) upto a height of 1200 mm complete all as specified and as directed by Engineer-In-Charge. Note : Bracket and all agnles are to be considered under the quoted rates Make- Asian Paints/ Nerolac Paints/ Dulux ( Akzonobel)/ Nippon Paint India Pvt Ltd

Supply & Fix in repairs micro controller based APFC control relay/ Reactive power manager to connect minimum 12 capacitor banks for automatic control of capacitor banks in 3 Phase 4 wire, 50 HZ supply LT Panel with target PF setting, LED operational indicators, Parameter display ( PF, KVAR, Capacitor bank values, CT ratio etc) and alarm signal for CT polarity reversal, Over Voltage etc complete with all necessary fixing arrangements complete all as specified and as directed by Engineer-In-Charge. Make : L & T Model : RPM-14 Cap pat No : MRPM1400000 or equivalent in Scheinder/ Siemens

Supply & Fix in repairs 3 phase, 50 HZ multi function meter class -I, to measure and display voltage, current, Frequency & Power factor with Class I Accuracy complete with all necessary fixing arrangements complete all as specified and as directed by Engineer-In-Charge. Make : L & T Model : RPM-14 Cap pat No : MRPM1400000 or equivalent in Scheinder/ Seimens

Taking down ceiling fan/exhaust fan/wall mounted fan of any make /type/size/sweep, at site from any height of the building for any defects, servicing complete,repairs /overhauling including replacement of worn out parts/rewinding as required , spare parts and refixing in same position incl. sucessful testing on full load wit blade complete all as specified and directed by Engineer-in-Charge. Note- (i) Capacitor, ball bearing, condenser, bushes, split pin, 'U' clamp with rubber reel, shaft PVC canopy and flexible wire will be measured and paid separately as "Supply only" (ii) Serviceable spares shall be reused. (ii) Rewinding shall be measured and paid separately.

Material and labour for preparing old surfaces of ceiling fan/exhaust fan/wall mounted fan/Geyser of any capacity or sweep, by scrapping and removing dust etc and filling cavities with one coat of filler and spray painting with synthetic enamel paint and writing MES Nos in block letters as per existing complete all as specified and as directed by Engineer-in-Charge.

Material and labour for opening the motor of ceiling fans of sweep 1200mm/1400mm, 230 volts, AC single phase, removing old unserviceable wire, cleaning of slots properly and rewinding with super enamelled copper winding wire of existing gauge with insulating material, heating, varnishing, greasing, re-assemabling the same after testing on full laod with blade and replacement of worn out minor parts including provision of PVC insulated and PVC sheathed flexible copper wire , three core of size 16/0.20mm of length 750mm complete all as specified and as directed by Engineer-in-Charge. Make-Deen Dayal, finolex,Atlas Note- (i) Capacitor, ball bearing, condenser, bushes, split pin, 'U' clamp with rubber reel, shaft and PVC canopy will be measured and paid separately as "Supply only" (ii) Serviceable spares shall be reused.

Material and labour for opening the motor of exhaust fans of sweep 450mm, 230 volts,AC single phase, removing old unserviceable wire, cleaning of slots properly and rewinding with super enamelled copper winding wire of existing gauge with insulating material, heating, varnishing, grasing, re-assemabling the same after testing on full laod with blade and replacement of worn out minor parts including provision of PVC insulated and PVC sheathed flexible copper wire , three core of size 16/0.20mm of length 750mm complete all as specified and as directed by Engineer-in-Charge. Make- Deen Dayal, finolex,Atlas Note- (i) Capacitor, ball bearing, condenser, bushes, split pin, 'U' clamp with rubber reel, shaft and PVC canopy will be measured and paid separately as "Supply only" (ii) Serviceable spares shall be reused.

All as per item no. 76 above but of 250/300mm sweep complete all as specified and directed by Eng-in-charge.

Material and labour for opening the motor of wall mounted fans of sweep 400/450/ 600mm, 230 volts,AC single phase, removing old unserviceable wire, cleaning of slots properly and rewinding with super enamelled copper winding wire of existing gauge with insulating material, heating, varnishing, grasing, re-assemabling the same after testing on full laod with blade with replacement of worn out minor parts including provision of PVC insulated and PVC sheathed flexible copper wire , three core of size 16/0.20mm of length 750mm complete all as specified and as directed by Engineer-in-Charge. Make-Deen Dayal, finolex,Atlas Note- (i) Capacitor, ball bearing, condenser, bushes, split pin, 'U' clamp with rubber reel, shaft and PVC canopy will be measured and paid separately as "Supply only". (ii) Serviceable spares shall be reused. (iii) contractor has to collect the unserviceable fans from MES complaint cell and after repair ,testing of fans the same shall be deposited in same place .

Supply only Fan capacitor 2.5 MFD, 230V, AC complete all as specified and as directed by Engineer-in-Charge. Make: Usha, Fentex, Tesla, Epcos, Havells

Supply only Fan capacitor 4.0 MFD, 230V, AC complete all as specified and as directed by Engineer-in-Charge. Make: Usha, Fentex, Tesla, Epcos, Havells

Supply only Fan capacitor 1.0 MFD, 230V, AC complete all as specified and as directed by Engineer-in-Charge. Make: Usha, Fentex, Tesla, Epcos, Havells

Supply only ball bearing suitable for ceiling fan of any sweep, exhaust fan, wall fan, pedestal fan as per sample ( 6201/6202) complete all as specified and as directed by Engineer-in-Charge. Make: SEICO, NBC, SKF, TATA

Supply only Gun metal bushes for fans of different sizes complete all as specified and as directed by Engineer-in-Charge.

Supply only MS nut, bolt 8mm dia of suitable size for hanging of the ceiling fans complete all as specified and as directed by Engineer-in-Charge.

Supply only flexible wire 1.5 Sqmm, twin core, 1100 Volt, twisted, PVC insulated, copper conductor, multistranded, FRLS for connection complete all as specified and as directed by Engineer-in-Charge. Make: Polycab, Havells, Plaza

Supply only PVC canopy for 1200/1400mm sweep ceiling fan as per existing size and make complete all as per specified and directed by Eng-in-charge.

Supply and fix in repairs new metal blades suitable for ceiling fan of 1200mm sweep complete all as specified and as directed by Engineer-in-Charge. Make: Usha, Crompton Greaves, Khaitan

Supply & Fix in repair down rod, for hanging of the ceiling fans, 45cm long, made out of 15mm dia GI pipe, heavy duty, having provision for fixing of U clamp including drilling holes at top and bottom for fixing fan motor assembly, painting with superior quality of white colour synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. Make of GI pipe-Tata/jindal

Taking down carefully storage type electric water heater (Geyser) of any capacity, carrying out servicing including replacement of various parts, if necessary, such as different sizes of screws and clamps, base assembly, washers, glands of all types/ valves / heating elements / Thermostat pipes / drain plug / thermal cut-out / safety valve and worn out minor parts to ensure water tightness including re-fixing in the position after testing complete all as specified and as directed by Engineer-in-Charge. Note : Base plate assembly, Heating elements, thermostat, thermal cut out and safety valve etc will be measured and paid separately as "Supply only."

Supply only Rubber washer for fixing the apparatus plate to inner container suitable to existing storage type water heater of same make and size complete all as specified and as directed by Engineer-in-Charge.

Supply only Heavy duty PVC flexible pipe 15mm bore, 18" long for both cold/hot water line with brass adopter and washer at both ends of the pipe complete all as specified and as directed by Engineer-in-Charge.

Supply only Indicator lamp round/rectangular complete all as specified and as directed by Engineer-in-Charge.

Supply only Thermostat for geyser 30 to 75 degree centigrade.Make: Thecha/DasPass/Victor complete all as specified and as directed by Engineer-in-Charge.

Supply only Thermal cut out for geyser complete all as specified and as directed by Engineer-in-Charge.

Supply only heating elements of capacity 1.5/2 KW, AC, 230 Volt complete all as specified and as directed by Engineer-in-Charge.

Supply only inner copper container for geyser of capacity 25 ltr, any make and type complete all as specified and as directed by Engineer-in-Charge.

Supply only Assembelly for water heater 25 ltr capacity of any make and type complete all as specified and as directed by Engineer-in-Charge.

Supply only 15mm bore safety valve/high pressure release valve, ISI marked for geyser of capacity 25/50 ltr complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair 3 core PVC insulated and PVC sheathed 1100 volt grade cable, 2.5 sqmm with stranded copper conductor, duly connected to geyser complete all as specified and as directed by Engineer-in-Charge. Make: Finolex / Plaza / Anchor / Havells / Polycab/Benlo

Taking up or down carefully old rusted concealed / surface GI tubes 15/20mm bore and connection complete by cutting chassis from existing brick walls as required including making good to disturbed surfaces of walls, floors to match with the existing surface, complete all as directed by the Engineer-in-Charge.

Supply and fix mild steel tubing medium grade 15mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix exhaust fan, made of metal body complete with louvers shutter, voltage 230 v, 50 Hz of sweep 250/300 mm including taking down existing exhaust fan and keeping in MES store yard complete all as specified and as directed by Engineer-in-Charge. Make: Usha, Crompton Greaves, Khaitan,Bajaj, orient

Supply and fix wall mounting fan 400mm sweep, 230 Volts, RPM not less than 1300 with full copper, motor single phase, pull chain arrangement for speed control, provision of oscillation and tilting up and down arrangements and taking down existing fan and keeping in MES store yard complete all as specified and as directed by Engineer-in-Charge. Make: Havells, Bajaj, Usha, Crompton Greaves, Orient, Khaitan as approved by GE.

Supply and fix in repairs single pole and neutral enclosure with a three pin & earth plug with socket complete with one single pole MCB 20 to 30 Amps, 240Volts, 'C series, 50 Hz , breaking capacity 10 KA complete all as specified and as directed by Engineer-in-Charge. Make :Legrand / L&T / Havells/Benlo

Supply and fix in repairs 15mm bore bib taps, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge. Make : Jaquar/ Marc/ CERA/ Kohler/ Player

Supply and fix of metal fasteners of 12mm dia complete as specified and as directed. Make Havells/HPL.

M&L for redressing /cutting opening through brick wall built in cement mortar for fixing exhaust fan of any size, cleaning and stacking bricks and removing surplus serviceable bricks etc to store and removing rubbesh out side MD land and making good in cement concrete 1:2:4 type B0 as required and including rendering with 10mm thick in CM (1:6) to match with existing surgaces including grouting of bolts for mounting of exhaust fan complete all as specified and as directed by Engr- in Charge

Supply & fix of SMC junction box (Side hinged door ) of size 240 x 130 x 95 mm for controlling the street/ security lights, with GI clamp porcelain connector for fixing to PCC/Steel pole including MCB SP 6 Amps capacity, complete all as directed. Make :- Sintex/ National/ L&T

Supply and fixing 3 core PVC insulated and unsheathed 1100 volt grade multicore cable 1 sqmm with stranded copper conductor cable, drawn through 20 mm dia PVC conduit, medium grade with necessary fixing arrangement from looping box to security light fitting etc including taking down old unserviceable complete all as specified and as directed by Engineer-in-Charge. Make: Havells/ Finolex/ Nicco/ Plaza/ Anchor/ Polycab/ RPG/ GLOSTER/ RR Kabel/ KEI

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engineer-in-Charge. Make : Philips Model No. BRP410 or equivalent in Havells/Bajaj

Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. complete all as specified and as directed by Engineer-in-Charge. Make : Philips Cat Pat No. BVP141 LED100 CW FG GR PSU or equivalent in OSRAM/CROMPTON.

Supply and fixing post top lantern LED type 35/40 watt 230 watt volts AC outdoor type with decorative post top, IP 65 protection with impact and corrosion resistant complete with driver and lamp including necessary fixing arrangements such as GI Pipe, PCC complete all as specified and as directed by Engineer-in-Charge. Make : Philips Cat Pat No : BGP300 LED40 757 PSU PC IN S1 or equivalent in Havells/Bajaj.

Supply and fixing LED Bollard light Fitting 9/10 watts aluminium landscape luminaire for diffused lighting, IP65 protected, electrically connecting up with cable, including necessary earth work and form work, cement concrete in coping of poles, fair finishing to exposed faces of concrete etc,complete all as specified and as directed by Engineer-in-Charge. Make : Crompton Model : SYrus Cat Pat No : LBLSR-10-CDL,Havells Cat pat No : TURINBLS10WLED830PSYMTOPC Philips Cat Pat No : BCP400 LED09 D CW PSU GR S1

Supply & Fix Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified ,type 410 SP-31 (9.00 metres long) Complete all as specified and directed by engineer In Charge. Note : Necessary PCC concrete and earth work will be measured and paid seperately. Make: India Tube and Co / India Electric Poles Mfg Co,Maharashtra / Bombay Tubes / Kalinga Tubes / Singh Profile, Pune

Material and labour for Plain Cement Concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation / mass concrete/filling complete all as specified and as directed by the Engineer-in-charge

Material and labour for Plain Cement Concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundation, footing, bases of columns, raft and raft beams, plinth beams, mass concrete and similar work etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Plain Cement Concrete 1:2:4 type B1 using 20mm graded stone aggregate as in foundation / mass concrete/coping including necessary formwork for fair finished surfaces etc complete all as specified and as directed by the Engineer-in-charge

Supply & Fix in repairs digital timer programmable switch, 230 Volt with single phase rating including necessary connecting cables complete all as specified and as directed by Engineer-in-Charge. Make : L&T/ Schneider/ Seimens

Supply & Fix in repairs ML-2 Contactor, 3 pole, 50 HZ for street lightning along with necessary fixing arrangements complete all as specified and as directed by Engineer-in-Charge. Make : L&T/ Schneider/ Seimens

Material & Labour for PVC insulated twin core aluminum stranded conductor round/flat cable size 10 Sqmm 1100 Volts grade served with an sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-Charge Make: Cable Corporation of India (CCI)/ Asian Cable Co, Chattisgarh/ Finolex/ Polycab/ Gloster/Universal/ RPG Cables Ltd , Thane/ Havells India Ltd/ RR Kabel/ KEI Industries Ltd(KEI)

Supply and fix IP 65 Weather Proof / Water Proof Rating outdoor usuage decorative Tricolour LED Strip with Amber, White and Green with necessary fixing arrangement to be fitted on Street Lights Poles/ war trophy complete all as specified and directed by engineer In Charge Make : Philips/ Osram Ledvance/ Havells

Material & Labour for preparation/fabrication of circular bracket made out of 32mm light grade MS pipe 1mtr with 25 x 5mm MS flat iron bracket round space duly welded inside the bracket including 4 Nos of connecting arms up to circular ring for mounting on top of 9mtr pole complete with two coats of synthetic enamel paint over one coat of red zinc chrome primer on all surfaces complete all as specified and directed.

Material & Labour for drilling/making hole of suitable size on top and bottom of 9mtr pole for passing through street light cable from LED light to junction box complete all as specified and directed.

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 86,360.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

joshua construction (BID ID -3259984)