Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.4 LAccepted-AOC | ₹29.4 L Quoted ₹31.5 L | L1 | Accepted-AOC LOWEST BIDDER |
| 2 | L2₹34.1 L+₹2.6 L (8.38%)Rejected-Finance | ₹34.1 L+₹2.6 L (8.38%) | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| 3 | L3₹35.4 L+₹3.9 L (12.4%)Rejected-Finance | ₹35.4 L+₹3.9 L (12.4%) | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| 4 | L4₹36.1 L+₹4.6 L (14.6%)Rejected-Finance 1001 63 SHALIMAR GARDEN ISMAILGANJ NEAR INDIRA NAGAR SECTOR 08 CROSSING LUCKNOW 226016 | LUCKNOW | UTTAR PRADESH | 226016 | ₹36.1 L+₹4.6 L (14.6%) | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| 5 | L5₹36.5 L+₹5.1 L (16.0%)Rejected-Finance | ₹36.5 L+₹5.1 L (16.0%) | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
1 Jun 2022, 6:00 pmClosed
GE 869 EWS
GE 869 EWS PIN-913869 C/O 99 APO
REPAIR MAINT TO EXISTING PERIMETER SECURITY WALL CHAIN LINK FENCING GATES GATE PILLAR AND PLASTERING AT UPPER LEIMAKHONG CENTRAL SECTOR AND ENGR REGT AT UPPER LEIMAKHONG MIL STN
2022_MES_521738_1
8415/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHONG
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹60,000
Yes
22 Mar 2023
4 May 2022
3 Jun 2022
4 May 2022
1 Jun 2022
18 May 2022
Amount
B/R work
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.
Dismantling fencing wire mesh chain link fencing etc, any type complete all speciified and directed.
Dismantling of existing RCC/ Steel /Wooden posts or struts (wood, steel or R.C.C.) any section,concrete ,brick work ,massonery etc . including taking out embedded portion and making good disturbed ground complete all speciified and directed
Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.
S&F in repais galvanised ,2 srand steel barbed wire 2.24mm dia barbed with 2mm dia barsbs at 75mm spacibg and staining rail staining bolts incl, securing or tying at crossing with and provision of galvanised mild steeled wire staples or steel pins etc as directed (each line wire to be measured) all as specifed and directed.
M&L for PCC M-15 grade (Nominal mix) using 20mm graded crushed stone aggregate in post holes complete all as specified and directed.
M&L for MS works as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F steel flat iron including necessary drilling hole bolting or reveting etc and similar work complete conforming to Fe -290 Gde E - 165 complete all speciified and directed
M & L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut not exceeding 12cm long and dia complete all speciified and directed
Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.
M&L for plain cement concrete (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundations and filling complete all as specified and directed.
M&L for PCC M-15 grade (Nominal mix) using 20mm graded crushed stone aggregate in coping complete all as specified and directed.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.
M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.
M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cm (1:6) complete all as specified and directed.
Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling,uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc. 20mm granite or trap stone. complete all as specified and directed.
Raking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar complete all as specified and directed.
M & L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar (1:4) complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc. complete all as directed.
M & L for rendering 15mm thick plaster in cement mortar (1:4) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)
M&L for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 290 (Grade E-165) quality-A complete all as specified and as directed.
M&L for prepraration of new or untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces not exceeding 10cm width or girth.complete all speciified and directed
M&L for preparing of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting complete all speciified and directed
Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all speciified and directed.
Labour only Restraining and resecuring including making good of Plain mild steel wire, galvanised chain link fencing including straining and refixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. complete all speciified and directed.
S&F 75mm PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls complete all speciified and directed
M/s Ritz Marketing
SHARMA ENTERPRISE
RK Enterprises
APPLE CONSTRUCTION
L BINOD CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .