PERIODICAL SERVICES, BLOCK/STONE WALLING, PLUMBING FITTING, AND MISC B/R WORK AT OTM AND MD ACCN OF DEPOT BN, OTM AND MD ACCN IN TRG BN-I, MD ACCN OF RECORD OFFICE AND AJIT VIHAR UNDER GE (CENTRAL) KHADKI

Amount

M & L for complete removal of existing treatment and preparation of old plasterd or unplastered surfaces of wall and applying two coat of oil bound distemper including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed

M & L for complete removal of existing treatment and preparation of old plastered or unplastered surfaces of wall and applying two coats of cement base paint including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed. Note:- Note;- (i) filling of cracks,holes and dents are included in the same rates (ii) Proper curing with water to be done before and after application of 1st coat.

M & L for preparation of old plasterd or unplastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed

M & L for preparation of old plasterd or unplastered surfaces of wall and applying one cement base paint complete all as specified and directed

M & L for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of white wash on wall complete all as specified and directed.

All as specified in item No 5 above but applying one coat of white (Lime) wash on ceiling.

M&L for for applying two coats of waterproofing exterior emulsion paint over two base coat/ two coats of primer by "Air less Paint Sprayer" ( pressure not less than 20.7Mpa/3000psi, 1.1L/min flow rate and 7.6 High pressure hose multicolor) by skilled labour complete all as specified and directed. (Make :- Apex Ultima Protek Asianpaints, Nerolac excel top guard, Berger weathercoat long life 10 or equivalant).

M & L for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of dry distemper (any tint) on walls complete all as specified and directed

M&L for Wall care putty of 3mm thick as in interior/ exterior on wall /ceiling surface of any description finished smooth and even surfaces complete all as specified and directed

M &L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint any tint all as specified and directed.

M &L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint all as specified and directed.

S&F in repair vitreous china Squatting pan white orissa pattern size 580x440mm with integral foot rests (Excluding flushing cistern & flush pipe) with 100mm dia bore cast iron P trap incl lime concrete bedding and making food the disturbed portion to match with the existing surface of floor .

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed as in repair, complete all as specified.

S&F in repair plastic water closet seat, white/black closet pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device.

S&F in repair vitreous china wash basin white flat back size 580x450 mm excluding taps but incl 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm

Taking up or down steel tubing 15 mm dia and connections including cleaning for refixing or removal to store all as directed

Taking up or down steel tubing 20 mm dia and connections including cleaning for refixing or removal to store all as directed

Taking up or down steel tubing 40 mm dia and connections including cleaning for refixing or removal to store all as directed

Supply and fixing 15mm nominal bore,steel tubing, galvanised, medium grade including all fittings with screwed & socket joints and jointing complete, fixed to walls/celling ( on surface/concealed ) or laid in floors all as specified and as directed.

Supply and fixing 20 mm nominal bore,steel tubing, galvanised, medium grade including all fittings with screwed & socket joints and jointing complete, fixed to walls/celling ( on surface/concealed ) or laid in floors all as specified and as directed.

Supply and fixing 40 mm nominal bore,steel tubing, galvanised, medium grade including all fittings with screwed & socket joints and jointing complete, fixed to walls/celling ( on surface/concealed ) or laid in floors all as specified and as directed.

Refixing 40 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)

Refixing 20 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)

Refixing 15 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)

Fixing of UPVC 40 mm dia for spout pipe in sunken floor complete all as specified and directed.

Disconnecting existing tanks N exc.1000 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) including Cleaning and removing all scale and dirt with chemical, etc, from tanks and from mouths of circulating pipes, etc.

Brass chromium plated overhead shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union CERA Cat No F7020307 or techno commercially equivalent makes specified in PS fixed in repairs pipe all as specified.

M&L for sunken flooring as per following details complete all as specified and directed (a) Special treatment to toilet floor by demolition of existing treatment of any description and thickness, removal of rubbish to a distance of 5KM to 7.5KM .(b) Clean the sunken portion of toilet / Bath / WC / Kitchen throughly to remove laitance, dirt dust, etc.(c) Form angle fillet of size 40mm x 40mm along the junction of wall and floor using polymer modified mortar ("Dr Fixit" Pidicrete URP" or equivalent as given in Appx 'B'.) (d) Sanitary pipes entering through walls and floor shall be sealed with "Dr Fixit Bathseal Tape"or equivalent as given in Appx 'C' and the gaps to be grouted with non-shrink cementitous grout "Dr Fixit Bathseal Grout" or equivalent as given in Appx 'C'. Nahani Traps, etc to be fitted securely and the gaps around it to be grouted in the same manner. (e) Apply one coat of a Bitumen-modified polymer coating "Dr Fixit Bathseal Plus" or equivalent as given in Appx 'B' on all angle fillets by brush

M&L Cement concrete (1:3:6) type C-2 using 20 mm graded stone aggregate as in floor, plinth protection, 75 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as directed by Engr-in-Charge and as specified.

S&F three layered with ISI mark rotational moulded polyethylene water storage tanks capacity 500 lit in white colour ( cylindrical vertical with closed top ) hoisted and fixed in position including dismantling and removing of old tank all as specified and directed.

S&F three layered with ISI mark rotational moulded polyethylene water storage tanks capacity 1000 lit in white colour ( cylindrical vertical with closed top ) hoisted and fixed in position including dismantling and removing of old tank all as specified and directed.

S&F three layered with ISI mark rotational moulded polyethylene water storage tanks capacity 2000 lit in white colour ( cylindrical vertical with closed top ) hoisted and fixed in position including dismantling and removing of old tank all as specified and directed.

S&F in repair 15 mm bore Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repair 15 mm bore PVC Bip tap standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minium weight 15mm 90gms/20mm-125gms).

S & F in repair stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle,15/20mm bore size screwed both ends for iron pipe or for unions and fittings and fixed complete all as specified.

S&F in repair 15 mm bore Pillar taps, cast copper alloy fancy type, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as directed.

S&F in repair Stop valve 15 mm of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimumweight 15m m-90gms/20mm-112gms) all as directed.

S&F in repair PVC Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for 15 or 20mm or 25mm bore iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)

S& F in repair covers for PVC tanks and for 500/1000 lit capacity with screws incl locking device complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nut of length 450 mm fixed in repairs all as directed.

S&F PVC connections 15 mm size with PTMT nut of length 600 mm fixed in repairs all as directed.

S&F in repair PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia 610 mm long

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified.

M & L for PLEATED Pleased Blinds in repair made of polyester fabric with aluminium coating at its back. Pleats of one inch with segments at the interval of not exc 100mm Top and bottom channels made of aluminium in matching colors. Cord lock and pulleys made of brass. Design and type as approved by GE complete all as directed.

Material and labour for PVC interlocking wall panelling 5mm to 7mm thick of surface finish natural wooden finish shed (in minimum size 1200mm hight x 300mm wide). Panel is to be fixed on framework with screw fixed horizontal or vertical to wall at every 750mm with centre & edge bracket in tongue & groove system on framework. if required the cavity of framework should be inserted with rock wool with 48 kg and 50mm density and alongwith all accessories and direction of Engineer in charge, including required flashing, U shape groove and other required accessories complete all as specified and directed by Engineer-in-Charge. Make and sample as approved by GE/Engineer-in-Charge.

75mm bore PVC(SWR) pipe, type 'B' single socketed in any length with rubber ring joints laid in trenches or floors fixed in repairs all as specified and as directed.

110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings fixed in repairs complete all as specified and as directed.

75mm bore PVC(SWR) pipe, type 'B' single socketed in any length with rubber ring joints laid in trenches or floors fixed in repairs all as specified and as directed.

110mm bore PVC(SWR) pipe, type 'B' single socketed in any length with rubber ring joints laid in trenches or floors fixed in repairs all as specified and as directed.

PVC (SWR) bends type 'B' of any radius, 75 mm dia complete all as specified and directed.

PVC (SWR) bends type 'B' of any radius, 110 mm dia complete all as specified and directed.

75 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed.

110 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed.

PVC (SWR) vent cowl of bore 75 mm dia, including taking down old PVC vent cowl all as specified and as directed.

PVC (SWR) vent cowl of bore110 mm dia, including taking down old PVC vent cowl all as specified and as directed.

PVC (SWR) 'P’ or 'S' trap, type 'B' 125/110 mm dia complete all as specified and as directed.

Cast iron sanitary connection socket to fit WC out-let of any size and shape fixed in repairs complete all as specified and as directed.

110mm bore PVC (SWR) WC connector type 'B' any type fixed in repairs complete all as specified and as directed.

PVC (SWR) multi floor trap 75mm bore plain with grating including jointing with solvent cement. complete all as specified and as directed.

PVC (SWR) gully trap 125/110mm setting and jointing in solvent cement complete all as specified and as directed.

100 mm bore Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) PVC (SWR) fixed in repairs complete all as specified and as directed.

Demolition of precast concrete block /brick work walling built in cement mortar as in manhole including PCC coping.

Taking down cement plaster on wall/concrete surface etc including racking out joints hacking for key scrubing down with water etc all as specified and directed

M&L for Precast cement concrete block masonry using type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar1:6 complete

M&L for rendering 15 mm thick with WPC @ 3% by wt. of cement on faces of brick/ PCC block masonry wall using cement plaster 1:4 and rendering is to be finished even and smooth (without using extra cement) complete

M & L preparation of newly plastered surface and applying two coat of cement base paint over a coat of primer on wall etc complete all as specified and directed.

M & L for rendering 10mm thick on fair faces brick work /PCC block masonary or concrete surface of wall using cement plaster 1:6 and finished even and smooth (without using extra cement) complete

M & L preparation of newly plastered surface and applying two coat of oil bound Distember over a coat of primer on wall etc complete all as specified and directed

M & L for rendering 5mm thick on fair faces brick work/ceiling /PCC block masonary or concrete surface of ceiling using cement plaster 1:3 and finished even and smooth (without using extra cement) complete

M & L preparation of newly plastered surface and applying three coat of white wash over a coat of chalk white on wall etc complete all as specified and directed

Dismantling of floor hearth or wall tiling including cm bedding (but not backing) removing serviceable tiles in store rubbish of the premises complete

M&L for double charge/ultra charge vitrified ceramic tiles 8-10 mm thick light shade, (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified.

M&L for Vitrified coloured tiles in vertical/skirting surface 8-10 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding .11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar (1:6) complete.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar complete.

M&L for Glazed ceramic coloured tiles in vertical surface 350 X250 x 7 mm thick/450X350, 6-7mm thick/300x450x6-7mm thick,300x200x6-7mm thick or equivalent set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and directed (Note; Pattern of tile as approved by GE.

M&L for 25 mm thick Cement concrete in level course for receiving floor tiles using Type B1,1:2:4 (20 mm graded aggregate) complete.

Demolition of stone slabs/flooring of any description laid bedded and pointed any mortar and all as directed.

M & L for polished granite slab machine cut for 20 mm thick bedded and jointed with colour cement to match cut to shape required complete all as specified and directed.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including M&L for screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes. complete all as specified and directed.

M&L for Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Ditto as per ser No 82 but on step riser skirting over and including 10mm thick rendering in CM (1:4) complete.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations.

MANIYA CONSTRUCTION CO

M/S OMSAI ENTERPRISES

vishalconstruction

MAHESH DADAJI BACHHAV

S.R.M.K Enterprises