Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹31.9 LAccepted-AOC F NO 117 GROUND FLOOR SUN RISE APARTMENT PLOT NO 6 DWARKA NEW DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹35.2 L+₹3.4 L (10.6%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹36.9 L+₹5.1 L (15.9%)Rejected-Finance 3788 SHAH GANJ GB ROAD NEW DELHI 110006 | NEW DELHI | DELHI | DELHI | 110006 | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹37.5 L+₹5.6 L (17.7%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹37.8 L+₹5.9 L (18.6%)Rejected-Finance | 5 | Rejected-Finance NOT LOWEST |
Tender Value
₹42.7 L
EMD Value
₹85,440
Closing Date
25 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PALAM DELHI CANTT
GE (AF) PALAM DELHI CANTT-10
ADDITION / ALTERATION TO SMC BUILDINGS AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT-10
2023_MES_616089_1
GENP-49/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (AF) PALAM DELHI CANTT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) PALAM
₹85,440
Yes
5 Dec 2023
28 Aug 2023
26 Sept 2023
28 Aug 2023
25 Sept 2023
12 Sept 2023
Amount
B/R Portion Dismantling of existing roof tiles including roof treatment and plaster of any thickness and removing the rubbish from site to outside MoD land.
M&L for 15 mm thick cement plaster in cement mortar 1:4 on brick/stone or concrete surfaces of roof, parapet etc mixed with water proofing compound including finishing surface even and smooth without using extra cement upto four storied building complete all as specified.(Note :- Water proofing compound shall be measured & paid separately under supply only).
Supply only liquid water proofing compound
M&L for cement concrete 1:2:4, type B-1 (using 20mm grade stone aggregate) as in coving, coping, benching, bed block for water tank, window cills, roof and chajja upto four storied bldg complete all as specified.
M&L for applying 3.00mm thick APP based polymer membrane as per manufacturer instruction over a coat of industrial bitumen 85/25 @ 1.20Kg/Sqm over bituminous primer @ 0.30 Ltr/Sqm on newly plastered, clean and dry roof surface including sealing of joint by torch application method and finishing top surface by applying two coats of bituminous alumininium paint over APP membrene and filling crumple joint with bituminious filler board complete all as specified & as directed by Engr-in-charge.
Excavating in post holes (or similar holes) each n exc 0.5 cum in, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering, and removing surplus soil to a distance not exc 50 mtr and making good surface.
M&L for cement concrete 1:3:6, type C-2 (40mm graded stone aggregate) as in foundations, posts, filling and mass concrete etc complete all as specified.
M&L for rolled mild steel sections as in main and cross beams, rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe 410 -W (GdeE- 250) qualityA all as specified
S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
M&L for preparation of newly steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, wooden etc.) or insulation board / slabs any thickness including cover fillets.
S&F for solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including PVC sheet filletts of width 35mm x 5mm thick for wall paneling inclusive of fixing on wall to make PVC frame as per specifications and drawing complete all as specified.
M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.
S&F for 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/aluminium framework with screws complete all as specified and directed.
Demolition of cement concrete (un-reinforced) of any description not exc 150mm thickness (above or below ground level) and removing the debris from site to outside MoD land.
M&L for 15 mm thick cement plaster in cement mortar 1:4 on brick/concrete surfaces in sunken portion mixed with water proofing compound, finished even and smooth without using extra cement including finishing surface even and smooth without using extra cement upto four storied building complete all as specified.(Note :- Water proofing compound shall be measured & paid separately under supply only).
M&L for applying 3.00mm thick APP based polymer membrane as per manufacturer instruction over a coat of industrial bitumen 85/25 @ 1.20Kg/Sqm over bituminous primer @ 0.30 Ltr/Sqm on newly plastered, clean and dry surface in sunken portion including sealing of joint by torch application method complete all as specified & as directed by Engr-in-charge (Note :- Plan area of sunken portion shall be measured).
M&L for cement concrete 1:5:10, type E-2 using 40mm graded stone aggregate as in filling under floor or in sunken slab complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the debris from site to outside MoD land complete.
M&L for 25mm thick cement concrete 1:2:4 type, B-0 using 12.5mm graded stone aggregate as in sub base floor etc complete all as specified and as directed.
M&L for Glazed colour ceramic tiles first quality of size 450X 300 x 7mm thick, set and jointed in neat cement slurry and pointed in colour cement to match including 10 mm thick rendering in CM 1: 4 as on vertical surfaces such as skirting, dado,wall etc complete all as specified.
M&L for Non skid coloured ceramic tiles,first quality, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified.
M&L for 75mm thick cement concrete 1:3:6 type C-2 using 20mm graded stone aggregate as in plinth protection including finished even and smooth surface without using extra cement and making joints 12 mm wide to the full depth of concrete at every 3 metres interval and at every change of direction and filling the same with & including bitumen 85/25 and sand in the proportion of (1:3 ) by weight complete all as specified.
S&F in repair 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), three layers, hoisted and fixed in position all as specified in SSR Part-I and necessary GI nipple, union etc complete.
S&F for 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms).
S&F in repair 20 mm dia gun metal globe or gate valve, half turn with iron lever, screwed both ends fixed complete all as specified.
S&F for 20mm thick polished granite stone counter with vitreous china wash hand basin 630mm x 450mm white fancy square type or bowl type with 32mm dia brass chromium plated waste fitting, galvanised Iron ‘light grade’ 32mm bore waste pipe including cutting work,taking down unserviceable WHB complete and making good disturbed surfaces in cement mortar 1:3 and fixed complete all as specified.
S&F for pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repair 15mm angle valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F in repair chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete as all specified.
S&F for PVC connections 15mm size with CP nuts of length 600mm complete all as specified.
S&F in repair 75 mm dia cast iron floor / nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good with cement concrete 1:2:4, type B-1 and testing after repairs complete all as specified.
S&F in repair 150mm x 150mm square gulley trap with 'P' trap and 100 mm dia outlet and fixed with cement concrete 1:2:4, type B-1 in proper slope as specified and as directed by Engr in Charge.
S&F in repair SFRC cover with frame of size 300mm x300mm x 50mm thick as per manufacturer's design suitable for square gulley trap complete all as specified and as directed by Engr-in-Charge.
Taking down cement or cement lime plaster of any descriptiion on brick/ stone or concrete surface including raking out joints, hacking for key, scrubbing down with water etc upto four storied building and removing the rubbish from site to outside MoD land.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:4 including finishing surface even and fair without using extra cement upto four storied building all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 including finishing surface even and smooth without using extra cement upto four storied building all as specified and directed.
M&L for rendering 10 mm thick in cement mortar 1:4 on concrete surface in ceiling surfaces including finishing surface even and smooth without using extra cement upto four storied building all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces in ceiling and applying two coats of distemper oil emulsion over a coat of wall primer upto four storied building complete all as specified and as directed.
M&L for preparation of newly plastered surface of wall and applying two coats of exterior emulsion paint 100% acrylic of approved colour over a coat of primer over 1mm thick (avg) putty punning upto four storied building complete all as specified and directed by Engineer-in-charge.
M&L for preparation of newly plastered or unplastered surfaces and applying two coats of distemper oil emulsion on walls over a coat of wall primer over 2mm thick (avg) putty punning upto four storied building complete all as specified and directed by Engineer-in-charge.
M&L for complete removal of existing treatment and preparing old plastered surface of walls and applying two coats of distemper oil emulsion over a coat of primer over 2mm thick (avg) putty punning upto four storied building complete all as specified and directed by Engineer-in-charge.
M&L for preparation of old treated surfaces of wall and chajja and applying one coat of exterior emulsion paint (weather and dust proof) complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old painted steel & steel based surface of any description or otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified.
M&L for preparation of old decorated plastered surfaces of ceiling, filling cracks /hole by applying wall care putty as required and applying one coat of oil emulsion distemper white or coloured complete all as specified.
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil.
M&L for cement concrete, type B- 2, 1:2:4 (40mm graded aggregate) as in hardstanding including finishing surface even and fair without using extra cement complete.
M&Lfor factory made machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid over 30mm thick sand layer complete.
M&L for cement concrete type C-1, 1:3:6 using 20 mm graded stone agrigate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.
M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified.
M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified.
M&L for polished granite (of any type) stone slab 20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in floor , platform etc including moulding / rounding complete over 15mm thick screed bed in cement mortar 1:4 all as specified and directed by Engr-in-charge
M&L for vitrified coloured (light shade) tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 all as specified.
S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Pa+nelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stliles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing.
S&F for butt hinges, stainless steel, ISI Marked, 100mm size complete.
S&F for extruded aluminium alloy handles, fabricated type anodised of 125mm long complete.
S&F for 100 mm long aluminium anodized barrel tower bolt of extruded section complete.
S&F for 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified.
S&F for aluminium colour powder coated (coating not less than 50 Micron) door frame and shutter single or double leaf with glazed or pre laminated particle board panel, interior grade fabricated including aluminium powder coated beading, rubber gasket and packing materials including drilling in existing wall and thrust bolt of suitable size complete comprising the following:- (a) Door frame section 101.60mm x 44.45mm x 1.93 mm. (b) Door shutter vertical style of size 85mm x 44.45mm x 2 mm. (c) Door shutter top rail of section 95.25mm x 44.45mm x 2.00mm (d) Middle lock rail/bottom rail of section 150mm x 44.45mm x 1.93mm. (e) Aluminium coloured powder coated tower bolt 02 Nos in each shutter 200 mm. (f) Aluminium coloured powder coated handle 02 Nos in each shutter 150 mm long. (g) Door floor spring ISI Marked. (h) Six lever mortice lock brass in each door. (j) 12 mm thick partical board (pre laminated both face) interior grade ISI Marked (k) 5mm thick tinted glass/plain glass(colour).
S&F for aluminium coloured power coated (coating not less than 50 Micron) side hung window/ventilator frame and shutter with section as per drawing No TD-109/2012 sheet (1/4 to 4/4) comprising the following:- (a) Window frame of section 101.60mm x 44.45mm x 1.93 mm. (b) Double shutter (glass and wire mesh shutter) 44mm x 44mm x 1.50mm top/bottom style. (c) Aluminium coloured power coated butt hinges 8 Nos in each window 100 mm size. (d) Aluminium coloured power coated tower bolt 3 Nos in each window 150 mm long. (e) Aluminium coloured power coated handle 2 Nos in each window 100 mm long. (f) Tinted/coloured glass 5 mm thick fixed to window with rubber gasket and aluminium powder coated beading. (g) Aluminium coloured power coated grill make : DECO grill DG-104 fixed with "H" Section. (Note : If required, contractor shall provide provision of opening for AC without any extra cost on this account).
S&F in repair aluminium coloured power coated (coating not less than 50 Micron) ventilator with top hung shutters including necessary jointing cleats, glazing clips, rubbers gasket, anodised aluminium snap beading, screw, powder coated aluminium anodised fittings as handle 150mm, tower bolt 150mm, hinges as per engineering practice complete all as specified.
Taking down old aluminum door/windows of any description size exc 1.5 sqm but not exc 3.00 sqm and M&L for complete repair such as glass panes, rubber beading, aluminum glazing clip, sliding system, locking system including necessary adjustment etc and refixing in same location complete all as directed. (Note :- Glass Pane/rubber beading/aluminum beading will be measured and paid separately as supply only under subsequent items).
S&F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.
S&F in repair door closer (cast iron body) hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed all as specified.
Supply only rubber beading to be fixed over glass panes in aluminum window/ door.
Supply only aluminum anodised glazing clip to the alumiinum window/ door frames after fixing the glass panes complete all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames glazed with putty or fixed with beading complete all as directed.
S&F for 4 mm thick sheet glass, best quality fixed to aluminium/steel/wooden doors/windows/ventilator/ partition and similar works with necessary fixing arrangements viz jointing cleats, glazing clips, rubber packing, screws, etc. or fixed with oil putty as per site requirement complete all as specified. (Note :- Rates includes necesssary scaffolding / ladder and safety measures upto four story bldg).
S&F 4mm thick figured glass, pin head type and glazing with aluminium/steel/wooden doors/windows/ventilator/ partition and similar works with necessary fixing arrangements viz jointing cleats, glazing clips, rubber packing, screws, etc. or fixed with oil putty as per site requirement complete all as specified. (Note :- Rates includes necesssary scaffolding / ladder and safety measures upto four story bldg).
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and and average width of aperture not more than 1.40mm fixed with stainless steel wire staples or beading as per site requirement complete all as specified.
S&F in repair floor door stopper of size 75 mm long aluminium alloy body and tongue, anodized with hard drawn steel spring including cleats fixed to door.
S&F in repair 25mm dia 16 gauge aluminium powder coated curtain rod including cutting and fixing complete all as specified.
S&F in repair designer pattern wall bracket suitable for 25mm dia curtain rod complete all as specified.
S&F in repair designer pattern side knobs/domes suitable for 25mm dia curtain rod complete all as specified.
S&F in repair venetian blind of make VISTA or its equivalent as approved by GE all as specified.
S&F in repair vitreous china wash down water closet (pedestal pattern) with 'P' or 'S' trap and plastic seat cover white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete all as specified.
S&F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specifed and directed.
S&F for flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern complete all as specifed.
S&F in repair vitreous china wash basin, white, flat back, size 550mm x 400mm with brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specifed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm.
S&F in repair waste fittings, brass, chromium plated for glazed ware sinks, basins etc of 32/40 mm dia with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed
S&F in repair 15mm dia bib tap, fancy type, chromium plated with crunch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule all as specifed.
S&F in repair 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.
S&F in repair 15mm dia stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specifed.
M&L for cement concrete bed to drain pipe 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) all as specifed.
S&F for 150mm bore salt glazed stoneware drain pipes grade 'A' laid in trenches and jointed as specified.
S&F in repair toilet paper holder of stainless steel fixed to wall with CP brass screws complete all as specified.
S&F in repair 15mm dia wall mixer brass chromium plated without hand shower for mixing Hot & Cold as approved complete as all specified and directed.
S&F in repair 15mm dia bib cock two-in-one brass chromium plated fancy type complete all as specified.
S&F in repair 15mm dia health faucet with 1 meter long chromium plated stainless steel flexible hose pipe and wall hook complete all as specified
S&F for 15mm bore galvanised steel water tubing ‘Medium Grade’ with ISI marked fittings and fixed on walls, ceiling or laid in floors including taking up or down unserviceable tubing with fittings and connections complete all as specified.
S&F for 20mm bore galvanised steel water tubing ‘Medium Grade’ with ISI marked fittings and fixed on walls, ceiling or laid in floors including taking up or down unserviceable tubing with fittings and connections complete all as specified.
S&F for 25mm bore galvanised steel water tubing ‘Medium Grade’ with ISI marked fittings and fixed on walls, ceiling or laid in floors including taking up or down unserviceable tubing with fittings and connections complete all as specified.
S&F in repair 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including suitable clamps upto four storied building complete all as specified.
Dismantling of 75/100mm bore cast iron drain pipes jointed in cement mortar / lead joint complete all as specified.
S&F for 100mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints and fixed to walls or in floor complete all as specified.
S&F for 75mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints and fixed to walls or in floor complete all as specified.
S&F in repair 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door jointed with cement complete all as specified.
S&F in repair 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door with cement joints complete all as specified.
S&F in repair 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door jointed with cement complete all as specified.
S&F in repair 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door with cement joints complete all as specified.
S&F in repair vitreous china squatting pan ‘ORISSA’ pattern of size 580mm x 440 mm White, with ‘P’ or ‘S’ trap and Integral foot rest, providing joints between flush pipe and socket of WC pan (excluding flushing cistern and flush pipe), fixing with and including provision of 150mm thick Lime concrete bedding complete all as specified.
S&F in repair stainless steel kitchen sink with drainage board of over all size 915mm X460mm and bowl size 410mm X 330mm X 160mm made of stainless steel 1mm thick sheet with plugs, chromium plated waste coupling and washer including bedding in cement mortar 1:4 to dwarf Wall or fixing cantilever brackets and connection to pipe complete all as specified.
S&F in repair steel plate rack of size 600mm x 900mm with 0.9 mm thick stainless steel sheet complete all as specified.
S&F for rolled mild steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe 410 -W (GdeE- 250) quality 'A' embedded in PCC 1:2:4 type B-1 and making good the disturbed surface with 15mm thick cement plaster in CM 1:4 complete all as specified.
S&F for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete including welding hold fast, hinges etc conforming to Fe-290 (Gde E165) all as specified.
S&F for 1mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each.
M&L for guniting to RCC work as in column,slab, walls, beam, lintel etc by removing loose concrete cover including cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and S&F welded wire mesh fabric or wire net less than 95mm X 95mm X 3 mm adhesive, plaster grade for concrete admixture 1 part of cement and 3.5 part of sand and average thickness 25 mm including 15mm thick cement plaster in cement mortar 1:4 on concrete surfaces including finishing the surfaces even and smooth without using extra cement including necessary form work and all other arrangements complete all as specified and directed. (Note.- Where ever reinforcement required shall be measured and paid separately).
S&F in repairs 100mm size mortice lock of aluminium body, 4 levers suitable to aluminium door shutters all as specified.
M&L for anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified.
M&L for anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified.
E/M Portion Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as wooden terminal boxes, plastic laminated sheet cover, DBs, meter board any type etc all as specified and as directed by Engr-in-Charge.
M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multi stranded copper conductor (FRLSH) of size 1.5 Sq mm (nominal area) drawn through and including non metallic rigid PVC concealed conduit, medium grade, ISI marked not less than 20mm dia, concealed/surface in wall, ceiling with GI saddles GI screws, rawl plugs with all fittings including Tee, Junction boxes alongwith 3 mm thick hylam sheet cover of suitable size on existing terminal boxes with new brass screws and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade cable with stranded copper conductor FRLS of size 1.5 Sq mm (nominal area) for one light/fan point controlled by one switch one way complete all as specified (Note :- Cost for cutting, chasing and making good to existing surfaces shall deemed to be included in the quoted rate).
All as per item No 118 above but for one socket outlet 5 Amp controlled by one switch on independent board.
(All as per item No 118 above but for one 3 pin 5Amp socket out let point on the same board controlled by one switch.
All as per item No 118 above but for one bell point controled by one bell push 5 Amp.
All as per item No 118 above but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 1.5 Sq mm copper conductor cable connected to earth dolly complete all as specified.
S&F in repair switch piano flush type 5 Amps, single pole one way.
S&F in repair socket out let 3 pin 5 Amps, flush type.
S&F in repair switch piano flush type single pole one way 15 Amp.
S&F in repair socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type.
SS&F in repair ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete.
S&F in repair electric buzzer 230 volt AC, single pole complete
S&F in repair flush type bell push, 5 Amp.
S&F in repair stepped type fan regulator 120 watt, 230 volts, 50 HZ, AC supply complete.
S&F in repair LED recessed mounting square slim LED down lighter 36 Watt for AS/GB/POP ceiling 2 feet x 2 feet size complete with driver internally prewired and connecting up with twin core flexible copper conductor cable of suitable size all as specified. Make : HAVELLS Cat Pt No : LHEBAEP7IW1W036 or its equivalent in BAJAJ/ PHILIPS.
S&F in repair LED surface mounting 36 Watt back-lit 2 feet x 2 feet tile in CRCA housing with full-opal diffuser for soft & glare-free light distribution complete all as specified. Make : ORIENT ELECTRIC Cat Pt No : LTSAQ-36-C or its equivalent in BAJAJ/ PHILIPS/ HAVELLS.
S&F in repair indoor decorative LED battens - integrated type 20 watt 4 feet white fixture complete with all accessories internally pre wired and including connecting up with twin core copper conductor cable complete. Make : HAVELLS Cat Pt No :LHEXARP7SN1W020 or its equivalent in BAJAJ/ PHILIPS.
ETERNITY PROJECT
Commercial Traders
Mahesh Enterprises
M/S Davinder Kumar
Shiv Shankar Nirman Co.
RK TRADERS
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .