CO Tehsil Welfare Office Building at Baddi Distt. Solan HP SH SITC of 1 No. 6 Passenger Elevator therein

Amount

Supply, Installation, Testing and Commissioning of 1 No. simplex car, 6 Passenger elevators with following specifications and features with one year free AMC from the date of handing over the lift.

Load –Kgs: 408 Kgs (6 Passenger)

Speed-MPS: 1.0 MPS

Travel (Max.): 6 Mts approx

Stops & Openings: 2 Stops With (all opening on the same side)

Power Supply: 400/415 Volts 3 phase 50 Hertz. AC

Control: VF Regenerative (closed loop)

Operation: Full collective with/without attendant.

Car Group: One car (Simplex)

Machine: Permanent Magnet Gearless motor

Car Size: 1000 mm W x 1050 mm D X 2100 H

Car Finish: Rear mid panel, Rear corner panels, Side mid panels, Side corner Panels, Front Panels all in stainless steel # 4 (Hairline)

Hoistway Available/Required: 1700 mm W X 1400 mm D

Flooring: Vinyl Tiles/Granite/PVC or at par as per standard of OEM

False Ceiling: SS or as per standard of OEM

Car Panels: SSHairline Finish or as per standard of OEM

Door opening:- 700 mm W x 2000 mm H

Door Operation: Center opening door

Ventilation : Cross flow fan

COP :Gien Buttons in stainless steel # 4 (Hairline)

HALL BUTTON ARRANGEMENT: Hall Button with HPI

Handrails On Three Sides: Stainless Steel Mirror/hairline Finish/Honey comb

Car Position indicator: Dot matrix (LED) Scrolling Display/or at par as per standard of OEM

Feature Details: Anti-nuisance Car call protection, Independent Service (for duplex only), Overload Device, Nudging, Emergency Firemen’s Service, Emergency Car Light Unit, Infrared Curtain Door Protection, Door Time Protection, Emergency Alarm Button, Extra Door Time of Lobby & Parking, Belt Inspection Drive, Auto Fan Cut Off, Audible Car Call Button, Door Open/Close Button, Manual Rescue Operation, Belt Call Protection, Seismic sensor, Voice Synthesizer, Intercom Automatic Rescue operation, Automatic Phase Reversal Device,Automatic Break Testing. All signal fixtures in stainless steel faceplates

The prices of complete job as per the specifications above shall be inclusive of steel Items, minor Building work, Scaffolding etc. All sundry fittings, assemblies, accessories, hardware items, foundation bolts, terminal lugs for electrical connections as required, and items which are useful and necessary for proper assembly and efficient working of various components shall be deemed to have been included in this job, whether such items are specifically mentioned in the tender documents or not.

Make :- JOHNSON ,OTIS, KONE, SCHNEIDER and MITUSBISHI,

Supplying and fixing Higher Rating (80 to 125A) 240/415 volts,10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

MCB FP 40 A 'C' curve

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way , Double door

Earthing with copper earth plate 600 mm X 600 mm X 3 mmthick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.Make KEI, Havells,Polycab,or as approved by Engineer-in-Charge.

Armoured cable 25 sq. mm (four core)

Supplying and erection floor sub- panel made from 1.6mm thick M.S. sheet steel duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement to house 63 Amp. MCCB with 63 Amp Copper busbar & 1 set RYB light indicator and cable alley as required complete in all respects including the cost of switchgears. The cubical pedestal shall have cable entry box at one side, with epoxy powder coated approved paint and bonding to the existing earth etc.

Supplying and fixing of 3 phase MMR relay having protection against phase loss, phase sequence,Phase asysmetery, under voltage, over voltage,3 phase interruption complete with all accessories including making connections, testing etc. as required. Make L&T, Havells, ABB or any other approved by Engineer-in-Charge.

PRAGATI ELECTRICAL AND ELECTRONIC CO