REPAIR/ MAINT OF FLOORING, PLASTERING, PLINTH PROTECTION JOINERY PERIODICAL AND MISC WORK IN 3 RPD AND CAMP AREA UNDER GE (W) MATHURA

Amount

M&L for complete removal of existing treatment and preparartion of old surfaces of walls and applying two coats of cement based paint over a coat of cement primer on walls etc complete all as specified and as directed.

M&L for complete removal of existing treatment and preparation of old surface of walls and applying two coat of distemper oil emulsion distemper on wall incl aplying a coat of wall care putty to achieve smooth finish to wall etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work/internal faces in man holes in CM (1:4) mixed with liquid water proofing compound @ 200ml by weight of cement per 50 Kg including finishing the surface even and smooth without using extra cement complete all as specified and directed. Note :This item will be executed in G+2 floor Bldg.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying a coat of two component elastomeric acrylic polymer modified cementitious water proofing coating, having properties of 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and sprinkle sand at 10-15 gram per sqft for better grip with plaster complete all as specified and directed.

M&L for preparing new surfaces of walls and applying two coats of cement base paint , white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar (1:4) complete all as specified and directed.

M&L for preparation of old treated surfaces of walls including cornices pillars etc and applying one coat of white wash on walls complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for Hard drawn welded steel wire fabric cut to length wt n exc 4.0 kg/sqm, bent to shape required and tying with & including mild steel wire (annealed ) not less than 0.9 mm dia supplied & fixed to steel members complete all as specified and directed.

S&F 75mm long stainless steel Butt hinges fixed complete all as specified and directed.

S&F 100mm Hasp and staple, stainless steel, safety type, with stainless steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F for 35mm thick (measured solid) precast cement concrete louvers and jallies type C-0 mix (1:3:6) (using 12.5mm graded stone aggregates) including all mouldings but excluding frame set in CM (1:6) complete all as specified and directed.

S&F framed work such as grill gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters walk ways railing frame work of ceiling etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

Taking down eaves gutters and rain water pipes, soil, waste and vent pipe ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning for refixing ( measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

M&L 100mm CI pipes soil, waste and vent pipe centrifugally spun cast in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.

S&F 100mm CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100mm CI bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and directed.

S&F 100mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 100mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

M&L for bands, straps, supports or stays for rainwater , Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and lintle hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L 75mm CI pipes soil, waste and vent pipe centrifugally spun cast in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.

S&F 75mm CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75mm CI bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and directed.

S&F 75mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 75mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

M&L for cutting holes in brick walls exceeding half brick wall but n.exc one brick wall, built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) Type B-1 as required complete all as specified and directed.

Taking up or down steel tubing 15mm bore pipe complete all as specified and directed.

Taking up or down steel tubing 20mm bore pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)15 mm nominal bore complete all as specified and directed.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)20 mm nominal bore complete all as specified and directed.

M&L for 15 mm nominal bore Mild steel galvanised water tubing, medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L for 20 mm nominal bore Mild steel galvanised water tubing, medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exc 15cm thick below or above ground level complete all as specified and directed.

M&L for 75mm thick cement concrete type C-1, (1:3:6) using 20mm graded stone aggregate as plinth protection and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for Plain cement concrete type B1 (1:2:4), using 20 mm graded crushed stone aggregate,40 mm thick , as in floor and finished even and smooth using extra cement laid in alternate bay and joints filled with and including bituminous compound grade 'A' complete all as specified and directed.

Demolition of brick work or stone/boulders masonary, built in cement mortor including all quoins, arches pillars, etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' old size brick straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

M&L for precast RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in manhole cover slab with plain fair faces and set in cement mortar (1:4) and surface embossed the date of casting of slab complete all as specified and directed.

M&L for cutting chases, pining in making good to facing where required and pointed in CM (1:3) to ends or edges of landing , steps cills, sun shade, shelves etc and cutting chases for concealed conduit wiring etc and making good , match with existing surfaces by applying white/colour wash cutting not exc 10cm girth complete all as specified and directed.

M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railigs upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, sligtly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section in unframed work, in any position complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described not excd 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed.

Supply only 6mm thick (consting of 5 Nos of Ply), plywood BWR type BB complete all as specified and directed.

Supply only 12mm thick (consting of 5 Nos of Ply), plywood BWR type BB complete all as specified and directed.

M&L for preparation of old steel surfaces of any description or girth over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old painted wooden /wood based materials surfaces of any description , not otherwise described ,over 10 cm width or girth and painting one coat with synthetic enamel including cleaning, stopping and rubbing down and removing all drops , dirts and splashes etc.complete all as spcified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and emoving rubbish off premises complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L for glazed ceramic tiles 450x350x8-9mmmm thick set and jointed in neat cement slurry and pointed in white or coloured cement to the match tiles on vertical surface over 15mm thick plastering in CM (1:4) complete all as specified and as directed

M&L for coloured Non-skid Ceramic tiles of size 8 to 9 mm thick (square/rectangular) area of each tile exceed 0.18 sqm but n.exc 0.38 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in cement mortar (1:6) for laying floor finsihes complete all as specified and directed.

All as per item No 54.00 (here-in-before) abvoe but as in skirting over 10mm thick backing coat in CM (1:3) complete all as specified and directed.

S&F in repair PVC valve less, symphonic action type, flushing cistern 10 ltr capacity, low level, white/coloured, with inlet, wall valve, float and handle, flush pipe including bracket complete all as specified and directed.

S&F in repair CP angle / stop cock fancy type chromium plated 15 mm bore screwed down, high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.

M&L for in repair 15mm pillar tap cast copper alloy fancy type with aerator single lever, quarter turn with form flow for iron pipe and fixed complete all as specified and directed.

S&F in repair for swiveling shower 15 mm with shower arm 195 mm long of CP of any colour and fixed complete all as specified and directed.

S&F in repair float valve of 20 mm dia ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F 32mm bore waste fittings chromium plated for sinks, basins with long shanks and fly nuts, flange and bedded in red cement and fixed, complete all as specified and directed.

S&F PVC waste pipe 32mm dia of length 0.8mm to 0.9mm fixed complete all as specified and directed.

S&F PVC waste pipe 40 mm dia of length 0.8mm to 0.9mm fixed complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) area n.exc. 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) area exc. 1.50 Sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down shutter only of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed.

S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.

S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.

M&L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and as directed.

S&F 35mm thick plain framed panelled door shutter, factory made (any number of panels) of 2nd class hard wood with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces including 2nd class hard wood kail beading 20mm wide tapering from 10mm to 5 mm on one side of shutter & fitted to chowkhats. The size of rail and style shall be as per IS –1003 (Part-I) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed.

S&F 30mm thick factory made glazed and skeleton shutters of 2nd class HW with partially panel shutter open rebated and prepared to receive glass / gauze etc edges or framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR pt-1 section 8.24 (a) complete all as specified and directed.

S&F Factory made PVC single door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as per specification and drawing of SSR Part-I and the door frame to be fixed to the wall using MS screw 75mm long with PVC fastener as per manufacturer's, instruction complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 5mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR complete all as specified and directed.

S&F 300mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L Preparing new wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 100mm long stainless steel Butt hinges fixed complete all as specified and directed.

S&F 150mm stainless steel barrel tower bolts with bright bolt and fixed complete all as specified and directed.

S&F 150mm long stainless steel handles, oval type complete all as specified and directed.

S&F 300mm stainless steel sliding door bolts, bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Factory made steel windows with side hung shutters including box type hinges with steel handle & steel peg stay complete without glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and directed.

S&F Factory made steel windows with side hung shutters including box type hinges with steel handle & steel peg stay complete with glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and directed.

S&F factory made steel ventilator with top hung shutter including hinges , steel peg stay complete all as specified and directed.

S&F MS Angle, flat iron ,round bars such as in door frame, ladders work to fix in PCC grouting, welding etc confirming to Fe-290 Gde E-165 complete all as specified and directed.

S&F for CP curtain rods (medium weight) 20mm dia with fixing with decorative CP brackets, holders etc fixed and design approved by GE complete all as specified and directed.

S&F in repair 18 mm thick Alstone Hybrid Water Proofing Board in cupboard shutter with decorative on one side & other side balancing white fixed by drilling screws complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in panes n.exc. 0.5 sqm each pane including hacking out old glass panes, complete all as specified and directed.

S&F 10mm dia and 75mm long anchor bolt of stainless steel with drilling fastner machine compressed in wall/ceilings complete all as specified and directed.

ARCHI ENGINEERS

Deepak Saxena

M/s Hoti Lal Contractor

VANI CONSTRUCTION

JWALA ELECTRIC CONTRACTORS