AMC for Operation and Maintenance of electrical power distribution system including DG sets and other electrical equipment installed in PDIL Bhawan

Amount

PART-A Sl. No. Description Skilled Semi-Skilled Category(Rs.) Category (Rs.) 1.0 Minimum wage per day (as on 01.04.2020) 764.00 695.00 1.1 [email protected]% of 1.0 above (as applicable) 91.68 83.40 1.2 [email protected]% of 1.0 above (as applicable) 24.83 22.58 1.3 Total rate per man per day (1.0+1.1+1.2) 880.51 800.9875 1.4 Working days 26 26 1.5 Wages per man per month 22893.26 20825.675 1.6 Number of Personnel 6 4 1.7 Wages per month 137359.56 83302.7 1.8 Total wages per month 220662.26

1.9 Contractor's service charges per month (to be quoted in Rupees only) (including charges for uniform and all other miscellaneous charges, if any)

Description of Work / Item(s)

Amount

PART-B (OPTIONAL RATES) FOR SUPPLY OF ADDITIONAL MANPOWER

For providing additional manpower during a major breakdown or under any unforeseen emergency which may arise at any time and on any day, even on Sundays and Holidays including supply of consumables, operating tools etc. as per clause no. 3 to 4 of 5.1 of “Technical Scope” (but excluding supply of spares) for 8 hrs duty in one day of 24 hrs.:

Skilled operator / technician with adequate experience duly licensed to work in HT installations.

Helper with adequate experience to work as assistant to skilled operator/technician.

Skilled operator / technician with adequate experience duly licensed to work in HT installations.

Helper with adequate experience to work as assistant to skilled operator/technician.

Description of Work / Item(s)

Amount

3.0 Part-C (Rates For Other jobs including supply) :- The rates quoted in this ‘Schedule of Rates’ (Part-C) shall be inclusive of all taxes & duties and shall be firm during the entire contractual period irrespective of any variation in the rate of taxes & duties including inclusion of any new taxes & duties. However, the contractor shall be required to indicate the applicable taxes, duties etc. separately while invoicing to PDIL.

(3.1) Repair of 3 phase, 415 V, 50 Hz. Induction motors including supply of respective materials: i) Rewinding of burnt motor with new super enamel copper wire of the same size as that of old /burnt winding, cleaning the slots etc. and including supply of super enamel copper wires, insulating papers/ tapes, wedges etc. as required duly varnished with insulating varnish, baked in electric oven and tested in recognized testing laboratory and also inclusive of transportation charges from and to PDIL Bhawan premises ii) Replacement of both DE & NDE Bearings

(3.1.1) 1.1 KW (1.5 HP)-Rewinding

1.1 KW (1.5 HP)- Bearing

(3.1.2) 1.5KW (2.0 HP) - Rewinding

1.5KW (2.0 HP)- Bearing

(3.1.3) 2.2 KW (3.0 HP) - Rewinding

2.2 KW (3.0 HP) - Bearing

(3.1.4) 3.7 KW (5.0 HP) - Rewinding

3.7 KW (5.0 HP)-Bearing

(3.1.5) 5.5 KW (7.5HP) -Rewinding

5.5 KW (7.5HP)- Bearing

(3.1.6) 7.5 KW (10.0 HP) - Rewinding

7.5 KW (10.0 HP) -Bearing

(3.1.7) 11.1 KW (15.0 HP)-Rewinding

11.1 KW (15.0 HP)- Bearing

(3.1.8) 15.0 KW (20.0 HP)-Rewinding

15.0 KW (20.0 HP)-Bearing

(3.1.9) 30.0KW (40.0 HP)-Rewinding

30.0KW (40.0 HP)- Bearing

(3.1.10) 45.0KW (60.0 HP)-Rewinding

45.0KW (60.0 HP)-Bearing

(3.1.11) 112.0KW (150.0 HP)-Rewinding

112.0KW (150.0 HP)-Bearing

(3.2) Repair of ceiling fan, pedestal fan and wall mounted fan motors including supply of respective materials: i) Rewinding ii) Replacement of bearing iii) Replacement of bushings iv) Replacement of capacitors

(3.2.1) 1200 mm sweep ceiling fan - Rewinding

1200 mm sweep ceiling fan- Bearing

1200 mm sweep ceiling fan - Bush

1200 mm sweep ceiling fan -Capacitor

(3.2.2) 1400 mm sweep ceiling fan - Rewinding

1400 mm sweep ceiling fan-Bearing

1400 mm sweep ceiling fan-Bush

1400 mm sweep ceiling fan-Capacitor

(3.2.3) 400 mm. sweep pedestal/ wall mounted fan - Rewinding

400 mm. sweep pedestal/ wall mounted fan-Bearing

400 mm. sweep pedestal/ wall mounted fan -Bush

400 mm. sweep pedestal/ wall mounted fan -Capacitor

(3.3) Repair of exhaust fan motors including supply of respective materials: i) Rewinding ii) Replacement of bearing iii) Replacement of bushings iv) Replacement of capacitors v) Replacement of shaft

(3.3.1) 610mm. Sweep - Rewinding

610mm. Sweep - Bearing

610mm. Sweep - Bush

610mm. Sweep - Capacitor

610mm. Sweep - Shaft

(3.3.2) 457mm. Sweep - Rewinding

457mm. Sweep -Bearing

457mm. Sweep - Bush

457mm. Sweep -Capacitor

457mm. Sweep - Shaft

(3.3.3) 380mm. Sweep - Rewinding

380mm. Sweep -Bearing

380mm. Sweep -Bush

380mm. Sweep -Capacitor

380mm. Sweep -Shaft

(3.3.4) 305mm. Sweep - Rewinding

305mm. Sweep -Bearing

305mm. Sweep -Bush

305mm. Sweep -Capacitor

305mm. Sweep -Shaft

(3.4) Supply and laying of 1100 V grade PVC insulated, GI round wire/ flat armoured, stranded Aluminium conductor cables as per IS: 1554, approved make in pre-cast RCC trench/ under soil at minimum depth of 700 mm in excavated trench after brick troughing/ on overhead ladder type cable trays or risers including digging of cable trench, brick troughing with Class-A bricks and dry sand (supply of brick & sand inclusive) laying of cable, back filling with soil, compacting & removing extra soil from site of excavation, clamping and dressing of cables in RCC trench/ overhead trays etc. of following size of cables:

(3.4.1) 3 Core 10 Sq.mm -Supply

3 Core 10 Sq.mm -Laying

(3.4.2) 4 Core 10 Sq.mm -Supply

4 Core 10 Sq.mm -Laying

(3.4.3) 3 Core 16 Sq.mm -Supply

3 Core 16 Sq.mm -Laying

(3.4.4) 4 Core 16 Sq.mm -Supply

4 Core 16 Sq.mm - Laying

(3.4.5) 3 .5 Core 25 Sqmm -Supply

3 .5 Core 25 Sqmm - Laying

(3.4.6) 3.5 Core 35 Sqmm -Supply

3.5 Core 35 Sqmm -Laying

(3.4.7) 3.5 Core 50 Sqmm -Supply

3.5 Core 50 Sqmm - Laying

(3.4.8) 3.5 Core 70 Sqmm - Supply

3.5 Core 70 Sqmm - Laying

(3.4.9) 3.5 Core 95 Sqmm -Supply

3.5 Core 95 Sqmm - Laying

(3.4.10) 3 Core 120 Sqmm -Supply

3 Core 120 Sqmm -Laying

(3.4.11) 3.5 Core 300Sqmm -Supply

3.5 Core 300Sqmm -Laying

(3.4.12) 3.5 Core 400Sqmm -Supply

3.5 Core 400Sqmm - Laying

(3.5) Same as Sl. No. 3.4 above but control cables with stranded copper conductor of following sizes:

(3.5.1) 3 core 2.5 Sqmm. -Supply

3 core 2.5 Sqmm. -Laying

(3.5.2) 7 core 2.5 Sqmm -Supply

7 core 2.5 Sqmm -Laying

(3.5.3) 10 core 2.5Sq.mm. -Supply

10 core 2.5Sq.mm. -Laying

(3.5.4) 12 core 2.5 Sq.mm. -Supply

12 core 2.5 Sq.mm. - Laying

(3.5.5) 19 core 2.5 Sqmm -Supply

19 core 2.5 Sqmm -Laying

(3.6) (Supply & laying of 1.1 KV grade single core, multi-stranded Cu, PVC insulated Cable for internal wiring in PCC/PMCC.)

(3.6.1) 120 Sq. mm. -Supply

120 Sq. mm.Laying

(3.6.2) 70 Sq. mm. -Supply

70 Sq. mm. -Laying

(3.6.3) 50 Sq. mm. -Supply

50 Sq. mm. - Laying

(3.6.4) 35 Sq. mm. -Supply

35 Sq. mm. - Laying

(3.6.5) 16 Sq. mm. -Supply

16 Sq. mm. - Laying

(3.7) Termination of already laid PVC insulated GI round wire/ flat armoured, PVC sheathed overall, stranded aluminium conductor power cables and stranded copper conductor control cables at Switch Boards/ feeder modules/ motors or any other equipment including glanding, crimping, termination of cable ends including supply of compression type, rolled aluminium cable glands, crimping type Aluminium/ copper lugs of approved makes etc. as required for the completeness of job for the following sizes:

(3.7.1) 3 Core 10 Sq. mm.

(3.7.2) 4 Core 10 Sq. mm.

(3.7.3) 3 Core 16 Sq. mm.

(3.7.4) 4 Core 16 Sq. mm.

(3.7.5) 3.5 Core 25 Sq. mm.

(3.7.6) 3.5 Core 35 Sq. mm.

(3.7.7) 3.5 Core 50 Sq. mm.

(3.7.8) 3.5 Core 70 Sq. mm.

(3.7.9) 3.5 Core 95 Sq. mm.

(3.7.10) 3 Core 120 Sq. mm.

(3.7.11) 3.5 Core 300 Sq. mm.

(3.7.12) 3.5 Core 400 Sq. mm.

(3.7.13) 3 Core 2.5 Sq. mm.

(3.7.14) 7 Core 2.5 Sq. mm.

(3.7.15) 10 Core 2.5 Sq. mm.

(3.7.16) 12 Core 2.5 Sq. mm.

(3.7.17) 19 Core 2.5 Sq. mm.

(3.8) Supply & crimping of copper lugs of the following size for connecting to switches etc inside compartment of PCC/PMCC.

(3.8.1) 120 Sq. mm. (Cu)

(3.8.2) 70 Sq. mm (Cu)

(3.8.3) 50 Sq. mm. (Cu)

(3.8.4) 35 Sq. mm (Cu)

(3.8.5) 16Sq. mm. (Cu)

(3.9) Supply of following type & size of L & T switch for compartment of PCC/PMCC or DB

(3.9.1) FB 250 Complete

(3.9.2) FN 125 Complete

(3.9.3) FA 100 Complete

(3.9.4) FF 63 Complete

(3.9.5) FAC 100 or equivalent Complete

(3.10) Supply & Laying of following size GI strip underground including making of trench & back filling after laying the earth strip and jointing of strips as required.

(3.10.1) 75 mm X 8 mm GI Strip

(3.10.2) 50 mm X 6 mm Strips

(3.10.3) 30 mm X 5 mm GI Strip

(3.10.4) 25 mm X 4 mm GI Strip

(3.11) Supply, fabrication and erection of MS Cable racks, risers, hangers, bare frame, foundation supports etc. for switch boards, junction boxes, switch sockets, cable supports including drilling, welding, bolting, riveting, grouting steel structure, providing one coat of red oxide primer and two coats of synthetic enamel paint including supply of steel structural, all consumables, necessary hard wares, paints etc. as required. The job shall be carried out as per instruction of Engineer-in-charge/ drawing supplied.

(3.12) Filtration/ Dehydration of Oil of 1250 KVA Oil filled transformer by streamline filter with contractor’s own oil filtration machine. for bringing the di-electric strength to the required level as per latest ISS, testing of oil before and after filtration in recognized testing laboratory, complete with all labour, and materials including transportation of oil filter m/c at PDIL Bhawan office complex premises and as per direction of Engineer-in-charge (excluding supply of Tr. Oil).

(3.12.1) with required size of DG Set to run oil filtration machine

(3.12.2) without required size of DG Set to run oil filtration machine

(3.13) Supply of Transformer oil as per latest IS for Power Transformer

(3.14) Supply of following type of MCB of breaking capacity 10kA of Havells/ HPL/ Indo Asian / Legrand / Standard make

(3.14.1) Upto 32 A SP

(3.14.2) Upto 32 A , DP

(3.14.4) Upto 32 A, TP

(3.14.7) Upto 32 A, TPN / FP

(3.14.8) 40 A, TPN / FP

(3.14.9) 50/63 A, TPN / FP

(3.15) Supply of following type of CFL lamps (Bajaj/ Crompton/ Havells/ Indo Asian/ Osram/ Philips/ Standard make)

(3.16) Supply of 230V, single phase, 50 Hz, 36W fluorescent tube (Anchor/ Bajaj/ Crompton/ Havells/ Osram/ Philips/ Surya/ Wipro make)

(3.17) Supply of energy efficient rapid start, flicker free high frequency (more than 20 KHz) Electronic Ballasts (Bajaj/ Crompton/ Havells/ Indo Asian/ Osram/ Philips/ Standard make) of following type:

(3.18) Supply of LED Tube light with inbuilt electronic driver which can be fixed directly into the existing T8/T12 FTL conventional fixtures (with electromagnetic ballast) after removing the starter(Anchor/ Bajaj/ Crompton/ Havells/ Osram/ Philips/ Surya/ Wipro make)

(3.19) Supply of indoor type heat shrinkable end termination kit of Raychem RPG Ltd./ Cable Corporation of India Ltd./ Birla 3M Ltd. make suitable for end termination of 3x300 sq. mm (Al), 11kV (UE) grade, XLPE insulated, PVC inner sheathed, armoured FRLS PVC outer sheathed cable

(3.20) End termination and subsequent testing of indoor type heat shrinkable end termination kit for 3x300 sq. mm (Al), 11kV (UE) grade, XLPE insulated, PVC inner sheathed, armoured FRLS PVC outer sheathed cable including all labour and consumable materials to make installation complete in all respect. The rate shall include drilling, taping of cable insulation, crimping of lugs to the conductor, connection of lugs to equipment terminal, supply & fixing of GI nuts, screws, bolts, washers and other necessary hardware, PVC tape of required grade for taping, making cable entries dust and vermin proof , earthing etc.

(3.21) Supply of outdoor type heat shrinkable straight through jointing kit of Raychem RPG Ltd./ Cable Corporation of India Ltd./ Birla 3M Ltd. make suitable for 3x300 sq. mm (Al), 11kV (UE) grade, XLPE insulated, PVC inner sheathed, armoured FRLS PVC outer sheathed cable

(3.22) Straight through jointing and subsequent testing of outdoor type heat shrinkable end termination kit for 3x300 sq. mm (Al), 11kV (UE) grade, XLPE insulated, PVC inner sheathed, armoured FRLS PVC outer sheathed cable including all labour and consumable materials to make installation complete in all respect.

(3.23) 11kV Resin Cast Current Transformer of ratio 75/1-1 A,Burden 15VA-15VA, STC:26.24KA for 1.0 sec,, Frequency:50Hz, class of accuracy 1.0-5P10 (Perfect Sales Corporation, Asea Brown Boveri Ltd., Kalpa Electrical Pvt. Ltd.)

SINGH ENGINEERING WORKS

CIS GLOBAL INFRATECH PVT LTD

Freaquer Corporation Pvt Ltd

CIS GLOBAL INFRATECH PVT LTD

R K G ELECTRICALS

Freaquer Corporation Pvt Ltd

R K G ELECTRICALS

CIS GLOBAL INFRATECH PVT LTD

Freaquer Corporation Pvt Ltd