SPL REPAIR TO ROAD FROM 41 FD REGT GATE TO 25 ARTY BDE OFFRS MESS AT RAJOURI UNDER GE 862 EWS

Surface dressing n exc 15cm deep in soft / losse soil, complete all as specified & directed.

Moorum/Red bajri, spread rolled and consolidated to gradient and camber required, spread thickness 75mm, complete all as specified & directed.

Scarifying or picking up gravelled macadam or bituminous macadam surfaces area not exc. 400 Sqm and depth exc. 50 mm but not exc. 100mm deep, complete all as specified & directed.

Rolling and consolidating formation surfaces in cutting and scarifying part with 08 to 12 tonne power roller complete to required level, gradient, slop, camber, super elevation including filling depression and including approved earth which may occur during rolling process all as specified and directed.

75 mm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required using Granite, trap or basalt and rolled with 10 to 12 tonnes power roller, each layer will be consolidated separately and to required gradient and camber, complete all as specified.

Preparing water bound macadom surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with power sweeper or compressor to remove all loose dirt etc., applying evenly a priming/ tack coat with bituminous primer using paving bitumen at 10 kg per 10 sq metre of road surface Complete all as specified and as directed.

Bituminous premix semi-dense asphaltic concrete 40 mm consolidated thickness using paving bitumen VG-30 wiith 5.5% binder content by weight of total mix rolled and compacted to required camber and gradient complete and rolled with 8 to 10 tonne power roller complete all as specified and directed. Note:- (I) In case the binder contents by weight of total mix is less than 5.5% as per per actual design mix, The prices adjustment shall be made as per average rates of all paid voucher for bitumen pertaining to this work. if the total binder contents as per design mix is more than 5.5% no prices adjustment shall be made for the same. (II) Job mix formula for Semi Dense asphaltic concrete shall be obtained from the institutions specified in CA prior to commencement of work and shall be got approved from the GE. (iii) The Contractor shall submit certificate issued to Hot mix plant that plant is SDAC compliant before incorporating workat site. The Hot Mix plant visit has to be organized by Contractor for approval of GE. (iv) The plant shall be automatic type which must have facility to print the details of composition of material incorporated with all batches of SDAC.

Preparing Black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with power sweeper or compressor to remove all loose dirt etc., applying evenly a priming/ tack coat with bituminous primer using paving bitumen at 05 kg per 10 sq metre of road surface Complete all as specified and as directed.

Providing premix bituminous macadam with 4% bitumen binder by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) (paving bitumen VG-30) by weight of total mix spread, rolled and consolidated with 8 to 12 tonne power roller to required gradient and camber complete all as specified and directed. Note:- (I) In case the binder contents by weight of total mix is less than 4% as per per actual design mix, The prices adjustment shall be made as per average rates of all paid voucher for bitumen pertaining to this work. if the total binder contents as per design mix is more than 4% no prices adjustment shall be made for the same. (II) Job mix formula for bituminous macadam shall be obtained from the institutions specified in CA prior to commencement of work and shall be got approved from the GE. (iii) The Contractor shall submit certificate issued to Hot mix plant that plant is SDAC compliant before incorporating workat site. The Hot Mix plant visit has to be organized by Contractor for approval of GE. (iv) The plant shall be automatic type which must have facility to print the details of composition of material incorporated with all batches of SDAC.

Applying evenly a priming/ tack coat with bituminous primer using paving bitumen at 05 kg per 10 sq metre on top of bitumenus macadam for reciving bituminous carpet, complete all as specified and as directed.

Bituminous premix semi-dense asphaltic concrete 30 mm consolidated thickness using paving bitumen VG-30 wiith 5.5% binder content by weight of total mix rolled and compacted to required camber and gradient complete and rolled with 8 to 10 tonne power roller complete all as specified and directed. Note:- (I) In case the binder contents by weight of total mix is less than 5.5% as per per actual design mix, The prices adjustment shall be made as per average rates of all paid voucher for bitumen pertaining to this work. if the total binder contents as per design mix is more than 5.5% no prices adjustment shall be made for the same. (II) Job mix formula for Semi Dense asphaltic concrete shall be obtained from the institutions specified in CA prior to commencement of work and shall be got approved from the GE. (iii) The Contractor shall submit certificate issued to Hot mix plant that plant is SDAC compliant before incorporating workat site. The Hot Mix plant visit has to be organized by Contractor for approval of GE. (iv) The plant shall be automatic type which must have facility to print the details of composition of material incorporated with all batches of SDAC.

M&L for preparing bituminous surfaces of road and making 2.5mm thick centre lines, stop lines, dashes, arrows etc, and the like not exceeding than 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with specifal applicator machine all as per manufacturer's instruction including cleaning the surface by removing all dirt, dust & all other forein matters, demarcation at site and traffic control, complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. including removal of old cat eye ,complete all as specified and directed.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1, including removal of old unservicable complete all as specified and directed

Prepration of newly concrete surface of wall with acrylic smooth exterior paint with silicone additives of required shade. ( New work ( Two or more coat applied @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm ) all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including demolition of old kerb stones and removing debries and making good surface and drainage opening wherever required complete as per direction of Engineer-in-charge ( Length of finished kerb edging shall be measured for payment)

Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 19 of tender doucments.