8380-COMPREHENSIVE MAINT (B/R AND E/M) AT VARDHARAJAN COLONY UNDER GE STM

Amount

M&L for preparing plastered or unplastered old surfaces of wall by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including crack filling with wall putty and applying one coat of distempering with oil bound distemper white or tinted complete all as specified.

M&L for preparing plastered or unplastered old decorated ceiling surfaces and applying one coat of distempering with oil bound distemper white or tinted complete all as specified.

Complete removal of existing treatment on walls and applying two coats of oil bound distemper over a coat of primer with 3mm thick wall putty to achieve smooth finish all as specified and as directed.

M&L for preparing of old painted wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even & smooth w/o using extra cement on internal surfaces of wall.

M&L for 15mm thick rendering in two layers of 10mm thick and 5mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even & fair, using water proofing compound in top layer complete all as specified and as directed. Note: WPC shall be measured and paid separately as "Supply only".

Supply only liquid waterproofing admixture.

M&L for rendering 5mm thick in CM 1:3 on fair faces of concrete surfaces as in ceiling surfaces and finished even and smooth with out using extra cement including scaffolding arrangement complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of primer on ceiling surfaces.

M&L for preparation of new plastered surfaces and applying two coat of oil bound distemper over a coat of primer with 3mm thick wall putty on internal surfaces of walls.

M&L for Preparation of new plastered surfaces and applying two coats of exterior weather proof paint over a coat primer white or tinted upto triple storey building including scaffolding arrangement on external surfaces of wall complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc. 1.5 Sqm but n. exec 4 Sqm each including making good disturbed surfaces.

Taking down shutters of any description n exec 1 sq. m each and removing to store.

Taking down shutters of any description exec 1 sq. m and n exec 2 sq. m each and removing to store.

M&L for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as directed

M&L for Anodised Aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as roller, channel, locks/handle complete all as specified.

M&L for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 290(Gde E-165) complete.

M&L for 1.25 mm thick mild steel, plain, black sheet in in hearths; covering to door shutters; covering to door chowkats (frames), steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M&L for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165.

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing.

M&L for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S&F 100mm size of mild steel butt hinges, medium weight, cold rolled .

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm size.

S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm long.

S&F Aluminium alloy, anodised, 300mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed

M&L for preparing surfaces of new wood or wood based surfaces any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M&L for preparation of new steel surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F in repairs brass mortice lock, vertical type, 2 lever of size 100 mm.

Hacking out old broken glass (any thickness, size, quality or description) from any type of frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F Sheet glass, ordinary quality, 4 mm thickness and glazing with oil putty or wooden beading in square n. exc. 0.5 Sqm each .

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple on any type of door/windows.

S&F in repairs 15mm bore steel tubes medium grade galvanised with all fittings / fixtures concealed to walls and ceilings or laid in floors.

S&F in repairs 20mm bore steel tubes medium grade galvanised with all fittings / fixtures concealed to walls and ceilings or laid in floors.

S&F in repairs 25mm bore steel tubes medium grade galvanised with all fittings / fixtures concealed to walls and ceilings or laid in floors.

S&F in repairs vitreous china wash hand basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting of fixing of supply and waste pipe all as specified.

S&F Brass chromium plated 32 mm bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) with plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device all as directed.

S&F in repairs PVC valve less, symphonic action type flushing cistern low level, 10 litre capacity with it’s complete accessories, fixed complete incl connection to water pipe and PVC 32 mm dia flush pipe etc.

S&F in repairs 3 in 1 wall mixer with provision of both hand shower and over head shower. Make: Jaguar (Continental) Cat No : CON-281 KN or equivalent.

Supply and fix in repairs Angle valves, cast copper alloy, screwed down, high pressure and fly nuts, screwed for iron pipe 15 mm bore all as specified.

S&F in repairs 15 mm bore Stop cock (concealed type) cast copper alloy , Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions .

S&F in repairs 15mm Bib taps, chromium plated fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F in repairs Brass chromium plated wash basin Mixer. Make : Jaguar (Continental) Cat No CON-169KNB or equivalent.

S&F in repairs PVC connection 15mm dia with PTMT nuts of length 450mm.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete. Make :Parry ware Cat No .T9937A1 or equivalent.

S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device.

S&F in repairs Corner glass Shelves (with brackets) for bath room . Make : Jaguar (Cat No-CAN-1173 or equivalent) .

M&L for 18/19mm Pre laminated particle boards, interior grade, Pre laminated decorative choice one side & other side balancing white lamination with screws to timber work for Cup Boards complete including dismantling the old U/s boards.

M&L for 6mm thick external teak wood lipping fixed to18/19mm thick particle boards with nails.

S&F continuous (piano) hinge mild steel, bright finish or electro galvanised width of flaps 40mm (when open) all as directed.

S&F 75mm size extruded aluminium alloy handles, fabricated type, anodised.

S&F Aluminium anodised Hasp and staple, safety type of size 75mm.

S&F in repairs 25mm dia aluminium coloured powder coated decorative fancy type curtain rods all as specified and as directed.

S&F aluminium coloured powder coated decorative fancy type end bracket and knob for 25mm curtain rods all as specified and as directed.

S&F in repairs Chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for glazed ceramic coloured joint free tiles in vertical surfaces 350 x 250 x 7mm/450x350x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement, incl cement screed 10mm thick in CM 1:3 all as specified and directed.

M&L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15 mm thick screed bed in CM 1:4 complete all as directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors/wall fixed in repairs all as directed.

S&F PVC (SWR) bend 110mm bore complete all as specified and as directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall fixed in repairs all as directed.

S&F PVC (SWR) bends 75mm bore complete all as specified and as directed.

S&F PVC (SWR) floor trap plain 75mm dia outlet with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110 mm.

Demolition of unreinforced concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and disposed off from site all as directed.

M&L for 75mm thick PCC 1:4:8, type D2 using 40mm graded stone aggregate as in sub base.

M&L for chequered cement concrete tiles 30 cm x 30cm x 25 mm thick set, jointed and pointed neat cement slurry in floor with grey cement and pigments, incl 20mm thick screed bed in CM (1: 4) all as specified and directed

M&L for 75mm thick cement concrete 1:3:6, type C-1 using 40mm graded stone aggregate as in plinth protection & paving, finished even & fairs without using extra cement.

Dismantling water tanks of 500 ltr capacity and removing to store

S&F Rotational moulded triple layer polyethylene water storage tanks (cylindrical vertical with closed top) 500 ltrs capacity of white colour hoisted and fixed in position including all necessary fittings/ fixtures all as specified in SSR Part I

S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 25mm-455gms)

S&F in repairs 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe

Supply and Fix in repairs Ceiling rose surface Bakelite 65mm x 50 mm two to three terminals all as directed.

Supply and Fix in repairs Switch piano flush type 5 amps single pole, one way, 240 Volts all as directed.

Supply and Fix in repairs Switch socket outlet 3 pin, 5 amp, flush type all as directed.

Supply and Fix in repairs Socket outlet 3 pin 5 Amps flush type all as directed.

Supply and Fix in repairs Bell push flush type 5 amps single pole 240 Volts all as directed.

Supply and Fix in repairs Bell ding dong, AC, 230 volts, single pole all as directed.

Supply and Fix in repairs Buzzer, AC, 230 volts, single pole all as directed.

Supply and Fix in repairs Socket outlet 3 pin 15 amps flush type all as directed.

Supply and Fix in repairs Switch socket outlet multipurpose 3 pin, 15 amp and one pin, 5 amp controlled by one switch all as directed.

Supply and Fix in repairs stepped type electronic fan regulator flush type on the exiting phenolic laminated sheet extra as required.

Supply and fix in repairs Lamp holder insulated body complete all as specified and as directed.

Supply and fix in repairs Modular flush box 1/2 module

Supply and fix in repairs Modular flush box 3 module

Supply and fix in repairs Modular flush box 4 module

Supply and fix in repairs Modular flush box 6 module

Supply and fix in repairs Modular flush box 8 module

Supply & Fix in repairs MCB Four pole 415 volts, 40 to 100 amps 'C' Curve 10 kA Capacity all as directed.

Supply and fix in repairs MCB SPN, 240 Volts, 32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed

Supply and fix in repairs MCB SP, 240 Volt,5-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed

Taking down the old UNSV LED Tube and taken as credit including Supply and fix LED tube Single end connection Ultra bright LED polycarbonate Tube light with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders. LED tube all as specified and as directed.

Taking down the old UNSV Light fitting and taken as credit including Supply and fix Wall mounted LED Batten with tube extruded Aluminium heat sink provided for efficient heat dissipation & integrated electronic driver of Lamp type: 22W LED including lamp all as specified and as directed. Make: HAVELLS catalogue No ENDURALINEAR NEO BS 22WLED865SPCWH/ PHILIPS cat No B1021LED25S6500PSU GRST/ CROMPTON cat no Radiance ray plus 22W LDRR24-CDL/ HLB-03-22-CW-AL of Halonix/ Bajaj BCLAB 22W LED P

Supply and fix in repair Wall mounted Regal Batten for T8 LED Tube for all as specified and as directed.

Dismantling existing UNSV hylam sheet of any size from boards removing switches etc. Supply and fix hylam sheet 3mm thick including necessary cutting of suitable opening for switches, sockets, regulators, etc refixing of switches, sockets, regulators, etc replacing screws and connecting up and testing.

Repairs to fluorescent tube light fittings fixed on wall/ceiling/suspended etc., upto 2 x 40 watts, any type/make/model, by replacing following unserviceable items/parts by supply and fixing including checking and rectifying defects in internal wirings and testing all as specified and directed :-

(a) Choke 40/36 watts

(b) Choke 28 watts for EEFTL fittings

(c) Tube 36/40 watts

(d) Tube 28/20 watts T5

Supply and fixing in repairs of 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed twin core 4 sq. mm nominal cross section in service connections.

All as per item No 101 herein above but 6 sq.mm twin core.

Dismantling the following types of fans of any make/model/sweep, removing the burnt out winding wires, rewinding with winding wires and insulation materials overhauling/servicing, greasing/lubricating, insulating electric leads, replacing cotter pins, bolts nuts, replacing unserviceable bearing, bushes assembling back checking for proper fixing and safety and testing all as directed and specified for :-

(a) ceiling fan upto 1400 mm (56") sweep.

(b) Exhaust fan upto 450 mm sweep.

Removing following unserviceable parts/items, supply and fix new items/parts of same materials existing and as described below for ceiling/exhaust/pedestal fans etc

(a) Ball bearing for ceiling fan/Exhaust fan/Wall fan/Pedestal fan upto 1400mm sweep.

(b) Bush bearing for ceiling fan/Exhaust fan/Wall fan/Pedestal fan upto 1400mm sweep.

(c) Fan condenser capacitor 2.5 mfd.

(d) Fan clamp for ceiling fan complete with rubber shackle, shackle bolt, nut, cotter pin, clamp complete.

(e) Fan blade of existing model/Make/Type for upto 1400 mm sweep

(f) Shaft assembly including lath works complete for ceiling fan/Exhaust fan/Wall fan/Pedestal fan upto 1400mm sweep

Dismantling following unserviceable items/parts from water heaters of any capacity/make/model, supply and fix new items/parts of same capacity/type/model, connecting up and testing :-

(a) Heating element 1.5 KW capacity AC 230 V and conforming to IS specifications screw/flange type.

(b) Heating element 2.0 KW capacity AC 230 V and conforming to IS specifications screw/flange type.

(c) Thermostat suitable for water heater upto 50 liters capacity.

(d) Indicator lamp any type suitable for water heaters upto 50 liters capacity.

(e) Non return valve 15 mm dia size.

(f) PVC connections with brass check nuts 15 mm dia x 45 cm long for hot water supply.

(g) PVC connections with brass check nuts 15 mm dia x 45 cm long for cold water supply.

(h) Rubber gasket flat/'O' ring type suitable for water heater

(j) PVC cable 3 core flexible copper conductor cable of size 40/0.193

(k) Plug top 3 pin 15 amps.

(l) Pressure release Valve suitable for geysers upto 50 liters capacity.

Sree Gokul Enterprises