WBPWDTE/AE/BESD-I/e-NIQ 22 of 2024-25

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) singlecore stranded 'FR' PVC insulated & unsheathed copper wire (Make Gloster/Havells/KEI/Polycab/RR) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]. 8 Mtr [5(c) / E-15 ]

9 Mtr [5(d) / E-15 ]

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. On Board [ 4a (i) / E- 10 ]

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] of following sizes on wall, ceiling with saddles and other accessories as required and mending good damages to building works. 20 mm size [ 7(a)/ E- 16 ]

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works. 19 mm dia 3 mm thick polythene pipe without earth continuity wire [3(a) / E- 2 ]

Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works. 25 mm dia 3 mm thick polythene pipe without earth continuity wire [4(a) / E- 2 ]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make Gloster/Havells/Polycab/RR/KEI/FINOLEX)) of the following sizes in the 19mm/25mm prelaid polythene pipe/PVC rigid conduit as per GS. 3 x 22/0.3 (1.5 sqmm) [1(b) / E- 9 ]

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC [1(s) / E- 9 ]

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC [ 1(v) / E- 9 ]

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC [ 1(y) / E- 9 ]

2x80/0.4 (10 sqmm) + 1x84/0.3 (6 sqmm) as ECC [ 1(b1) / E- 9 ]

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc.,including supplying sockets, tapes. 2.5 sq mm [9(i) / F-5]

4.0 sq mm [9(ii) / F-5]

6.0 sq mm [9(iii) / F-5]

10 sq mm [9(iv) / F-5]

Supply of 4/3.5 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes. 4 Core 50 Sq. mm [NS]

4 Core 35 Sq. mm [NS]

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish Above 35 sqmm to 95 sqmm at an average depth of 100 mm in floor/pavement/wall etc. [ 5(ii)/ F- 3 ]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below 4 Core 50 Sq. mm [ 7 (c)/ F- 4]

4 Core 35 Sq. mm [ 7 (c)/ F- 4]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials as per direction of EIC. 4 Core 50 Sq. mm [ 8b (xvi)/ F- 5]

4 Core 35 Sq. mm [ 8b (xvi)/ F- 5]

Supplying & Fixing CRC sheet metal (16 SWG) JB-cum Switch Board of the following sizes complete with three no.suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 175 x 100 x 65 [10(b)/E-3 + 13(c)/E-5]

200 x 150 x 65 [11(d)/E-4 + 13(d)/E-5]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+12 Way (Make-Legrand-607712/ABB/Havells-stadx) [13/D- 9]

2+8 Way (Make-Legrand-607712/ABB/Havells-stadx) [13/D- 9]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand/ABB/Havells) as per direction of EIC. 40 A DP [6/D- 5]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [Make-Legrand/ABB/Havells) ] 6-32 SP [7/D6]

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment 2 way [11/D- 9]

Supplying and fixing 240/415 V change over (MCB module) of on din rail of existing DBs/ enclosure and necessary connection. Make-HPL/Havells 25A,DP [9/D- 7]

Supply of Single Core XLPE Insulated & Sheathed Un-armoured Copper Conductor cables for Working Voltage up to 1100 Volts of following sizes. Make-RR Kabel/Gloster/Havells 4 Core 16 Sq. mm [NS]

Supplying and fixing Changeover switch with Sheet Steel enclosure on flat iron frame on wall with nuts bolts etc Make-HPL/Havells/Standard 32A [2(a)/D- 1 ]

Supplying and fixing 240V 30/32 A DP main switch with fuse on L&N Sheet steel Main Switches on flat iron frame on wall ( Make-HPL/Anchor/Havells/Standard) [1(a)/D- 1 ]

Supplying and fixing of 240V 30/32 A (Porcelain Fuse carrier & Base-Specification: IS: 2086) Kit-Kat Fuse unit & 1 no. Brass Neutral connector on suitable size of Hylam sheet of minimum 12mm thick [NS]

Supply & Fixing 240 V, 2x6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [21/E-6]

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [25/E-7]

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [22/E-6]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.[ For AC] [18/E-19]

Supply and delivery of single/twin Industrial LED Batten luminaries incl. Supply of 1 no./2nos. 18W LED Tube Single Fittings (make- Philips, Cat No. TMC-502 P1xT-LED 22W P3241 or equivalent model of CG / Bajaj / Wipro/Havells) incl. 1 no. 18W Master LED Tube cat no- 865T81 [NS]

Supply & Fixing of 240V 25W LED Street light luminarie (Crompton-Cat no.LSTS-25-CDL-M or equivalent make of Philips/Havells/Surya or as per direction of E.I.C [NS]

Supply of 36W (2x2 Ft.) LED Recessed full lit liminarie with glare free uniform illumination. Light Lumen Efficacy >100 lm/W, CRI>70, CCT-5700K,(Make:-Crompton POLARIS NIO-II Cat. No:- LCTLRNE-36-FO-CDL or its equivalent) as per direction of E.I.C [NS]

Fixing of 2x2 recessed light in false ceilling with all arrangrment and accessories as per GS direction of EIC.(for new 4 nos and existing 5 nos light) [NS]

Fixing only single/twin LED Batten light fitting complete with all accessories Directly on wall/ceiling as per GS. [ 14d/C-2 ]

Dismantling charges of existing distribution wiring, distribution boards,power boards,fittings etc as per direction of EIC. [NS]

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling as per GS. [ 22/D-13 ]

Supply and fixing 14W LED bulb (Bajaj/CG/Philips/wipro /Havells) on existing batten holder [NS]

Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8watt CFL / 100 watts GLS lamp complete set. [23/D-13]

Supply of ceiling fans with burst-proof S3 Capacitor & safety wire & complete with all accessories without regulator. (Make:- Compton Greaves High Speed plus/Orient summer cool/ Usha Striker) as per direction of E.I.C 1200 mm Sweep [NS]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [21(a)/C-3]

Supply & fixing 300 mm sweep wall fan (Make- Havells 12'' swing /Orient / Crompton/USHA or equivalent make as approved by E.I.C] oafter making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust as per direction of E.I.C. [NS]

Supply & fixing Heavy Duty Exhaust fan (Make- EPC Heavy Duty Exh.or equivalent make as approved by E.I.C] of followinng sizes after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust as per direction of E.I.C. 9"( 225mm ) Speed 1370 RPM [NS]

12"( 300mm ) Speed 920 RPM [NS]

Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall as per GS (9"/12") [ 33/D-14 ]

Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991) [30/D-14]

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. [18(a)/E-6]

Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire as per GS. [21(b)/C-3]

Repearing of UPS system after removing and cleaning of dust and foreign material,filling battery water,doing dirt charging and interconnection between all system with proper wire/cable as per direction of EIC. NS

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With TATA-Medium GI pipe as per GS. [ 2(a)/G-1]

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. [ 5(d)/G-3]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. [3(a)/G-2]

Excavation of soil for installation of Earth Electrode and filling & ramming. (For Soft Soil) as per GS [1(a)/G-1]

Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS. No.-4 SWG [5(a)(i)/G-2]

KARMAKAR ENGINEERING WORKS (BID ID -6135981)

Karmakar electrical Repairing Works (BID ID -6136009)