REPAIRS AND PAINTING OF STEEL FURNITURE AT KALIMPONG UNDER GE 867 EWS

Amount

CHARPOY WITH HARD TOP (DRG NO-FD/MAP-II/01)

S&F of new Plywood 12mm thick BWR Gde top shall be fitted with the help of suitable screw to the tubular frame structure and MS cleat of charpoy including taking down old one all as shown on drg and as directed.

STEEL ALMIRAH (DRG NO-FD-67 M & FD 243 M)

S&F new chromium plated (best quality as approved) handle of existing size including taking down old one all as shown on drg and as directed.

Taking out old self and S&F of new self made out from 1.00mm thick MS black sheet including 2 coats of spray painting over a coat of red oxide primer all as shown on drg and as directed. FOR ALMIRAH LARGE

Taking out old self and S&F of new self made out from 1.00mm thick MS black sheet including 2 coats of spray painting over a coat of red oxide primer all as shown on drg and as directed. FOR ALMIRAH MEDIUM

Taking out old self and S&F of new self made out from 1.00mm thick MS black sheet with channel base legs including necessary welding required and applying 2 coats of spray painting over a coat of red oxide primer all as shown on drg and as directed. FOR ALMIRAH LARGE

Taking out old self and S&F of new self made out from 1.00mm thick MS black sheet with channel base legs including necessary welding required and applying 2 coats of spray painting over a coat of red oxide primer all as shown on drg and as directed. FOR ALMIRAH MEDIUM

S&F new locking rod of 8/10mm as per existing size and type complete including necessary fittings such as washer, clamps etc complete including taking out old one all as shown on drg and as directed. FOR ALMIRAH LARGE

S&F new locking rod of 8/10mm as per existing size and type complete including necessary fittings such as washer, clamps etc complete including taking out old one all as shown on drg and as directed. FOR ALMIRAH MEDIUM

S&F MS locking device of brass 3 way 6 levers (Make-Godrej/Supreme/Rina) ISI marked including taking out old one all as shown on drg and as directed.

STEEL LOCKER (DRG NO-FD257M)

S & F MS butt hinges medium weight confirming to IS 100mm long for steel locker including gas welding and taking out old one all as shown on drg and as directed.

S&F safety hasp and staple chromium plated 75 x 40 x 3 mm thick for steel locker including taking out old one all as shown on drg and as directed.

S&F chromium plated MS handle 100mm long for steel lockers including taking out old one all as shown on drg and as directed by Engr –in-Charge.

Taking out old leg and S&F of new legs made out from 1.00mm thick MS black steel sheet including 2 coats of spray painting over a coat of red oxide primer and gas welding all as shown on drg and as directed.

TABLE STEEL (DRG NO-FD 84(M)

S&F of following new table top 19mm thick veneered particle board. Veneered finished on one side solid core, interior grade with teak wood beading on all sides. The top shall be fixed with frame by chromium plated screw including taking out old one all as shown on drawing drg and as directed. TABLE OFFICE TYPIST/CLERK

S&F of following new table top 19mm thick veneered particle board. Veneered finished on one side solid core, interior grade with teak wood beading on all sides. The top shall be fixed with frame by chromium plated screw including taking out old one all as shown on drawing drg and as directed. TABLE OFFICE OFFICERS

Taking out old unserviceable table drawer and S/F of new table drawer made out from 1.00mm thick MS black sheet including 2 coat of spry painting over a coat of red oxide premier all as shown on drg and as directed. TABLE OFFICE TYPIST/CLERK

Taking out old unserviceable table drawer and S/F of new table drawer made out from 1.00mm thick MS black sheet including 2 coat of spry painting over a coat of red oxide premier all as shown on drg and as directed. TABLE OFFICE OFFICERS

S&F Table drawer shutter of size 40 cm x 36 cm made out from 1mm thick MS Black sheet with drawer lock including gas welding and two coated of spray painting of Og paint over a coat of red oxide primer for table office officer including taking out old shutter all as shown in drg and as directed.

DINING TABLE ALUMINIUM TOP (DRG NO FD-165M)

S&F ORs dining table top 19mm thick block board (Nepal (M) board/Bhutan board) with 22 gauge Aluminum sheet on top including taking out old one all as specified and shown on drg and as directed.

Repair to rusted tear and wear legs of dining table ORs with new pieces of square tube 25 x 25mm (16 gauge) not exceeding 150 mm length including gas welding and grinding to match the surface including 2 coats painting and new hard rubber to complete all as shown on drg and as directed.

Welding of broken joints of steel furniture item of same weld joints shall be continuous and finished smoothly by gas welding all as directed by Engr – in- Charge.

CHAIR CB STEEL (DRG NO FD-75 M)

Taking out old/unserviceable seat and back frame of chair CB steel and S&F of new seat and back of chair CB steel made of well seasoned teak wood as suitable size. Seat and back frame shall be weaving with plastic cane 2 mm with white Godrej pattern and bordering shall be all round with 3 mm wide plastic cane. All wooden surfaces shall be painted with black synthetic enamel paint and steel surface shall be painted with olive green paint (Make: Shalimar/Berger/Asian paint) all as specified and as directed.

Taking out unserviceable handle of chair CB steel with arms and S&F of new hand rest of chair CB steel made of well seasoned teak wood. Handle shall be painted with black synthetic enamel paint of approved 1st quality and it shall be fitted with the help of suitable shelf tapping C/S long screws as shown on drg and as specified and as directed.

CHAIR VARANDAH (PLASTIC CANE) (DRG NO-FD 19(M)

Applying one coat of synthetic enamel paint (spray painting) white to all steel surface after preparation of surface & M & L canning using 4 mm wide plastic cane, white, half round for seat & back including replacement of all four damaged hard rubber toes after the painting is completely dried up and taking out old plastic cane all as directed and shown on drawing (Note: Canning shall be done as per Godrej pattern).

Preparation of surfaces (internal, external, shelves, legs etc) of following items and making the surface free from dust rust any foreign material and applying one coat of synthetic enamel paint of 1st quality (Berger/Asian) of approved shade including necessary repairs if any by providing rivets, gas welding denting etc. The paint shall be done by spraying method all as specified and as directed.

Charpoy with hard top (DRG NO-FD/MAP-II/01)

Almirah Large Steel (DRG NO-FD67 M)

Almirah Medium Steel (DRG NO-FD 243 M)

Locker Steel (DRG NO-FD 257 M)

Table Office clerk/typist steel (DRG NO-FD 84 M)

Table office Officer Steel (DRG NO-FD 84 M)

Book shelf open large steel (DRG NO-FD 69 M)

Rack adjustable steel 6 tier (DRG NO-FD 106 M)

Chair CB steel with arms including painting to wooden surface (DRG NO-FD 75 M)

Chair CB steel without arm (DRG NO-FD 75 M)

Steel frame of table dining ORs aluminum. (DRG NO- FD 165 M)

Sub Total of Schedule 'A'

Schedule of Credit (Minus) Rs. 20,540.00 B/F from Ser page No. 25 NOTE: Bidder shall insert credit amount as rate Rs. 20,540.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender.

Sub Total of Schedule of Credit

C. M. AGARWAL AND CO

SANJAY SAW MILL

S K ENTERPRISES

ANTHONY PRADHAN

PRASAD PRADHAN AND SON

RAJU TAMANG