Estimate for renovation of Park near Shamshan Ghat in Jharsa Village Ward No. - 12 under Zone-III, Gurugram.

Providing and fixing Chain Swing - 2 seater ( Swing). Specifications Attached.

merry go round 4 seater 5dia main frame is m s sq pipe round pipe centrel pipe which further pipe supports with pipe ball bearing assembly chair made of molded frp plastic pu primer and pu paints

sea saw 4 seater 8 lx5 5 Hw X 15 high frame of ms pipe 2 x 12 guage sittibg planks is of pipes and handle seats 4 nos. molded frp material

Wave Slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of m.s pipe 1” x 12 gauge and m.s rectangular pipe

Providing and Fixing mono block 1 HP motor Texmo make complete in all respect.

Providing and fixing Dholpur canopy in Dholpur stone of 12` dia 1. Base flooring - 4``x 15`` = 452 sqft. 2. Side Cladding - 1``x 18`` = 113 sqft 3. Pillars with carving - 10``x 10``x96`` = 8 nos 4. Roof terrace at the top of pillars - 2``x 18`` = 113 sqft. 5. Canopy beam lower - 7``x 10`` = 75 sqft. 6. Canopy beam upper - 4``x 15`` = 75 sqft. 7. Arch with carving - 3``x 30`` 8. Height of the canopy from the top of the pillar - 9` Including of brick foundation, CC for flooring and all type of loading unloading vehicle and all type of fixing materials and labour and taxes.

`Providing and fixing Concertina coil 0.75mm expension of case 7m/coil with high tensile spring steel size 2.50mm dia including M.S angle nut and bolt and carriage ,loading and uploading in all respect.`

Supply and installation of 25 mm thick EPDM Rubberised flooring of 2 layers laid on PCC base. Layer 1 of 19mm SBR Sub Base cast in situ, Layer 2 of 6 mm EPDM Granules cast in situ ( Dow/ BASF binder to be used for 6mm EPDM) . One year maintenance and warranty. As per approved pattern and colors, all works complete upto satisfaction of engineer incharge. Including 18% GST.

Pull Chair:- Providing, and fixing of Pull pair of size 2500 X 800 X 2000 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 3.0 mm thick all pipes made up of hot roiled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc .primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be` made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GULLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix theequipment on to it and cover nuts and bolts with the baseplate cover, all complete as per directions of Engineer in Charge.

Horse Rider Station:- Providing, and fixing of horse rider station of size 1000 x 600 x 1100 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Alczo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge.Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and a. .royal of arge regari ing materia , s ape of equipment,colour on metal, seat and base cover plate and fixing of equipment etc.