REPAIR TO JOINERY SUCH AS WOODEN/STEEL/ALUMINIUM DOORS AND WINDOWS, CUPBOARDS, CURTAIN RODS ETC IN OFFR MD ACCN UNDER GE(MCTE) MHOW

Amount

Taking down shutters of any description n.exc 1 Sqm each all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each all as specified and directed.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) n. exc 1.50 Sqm each all as specified and directed.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each all as specified and directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water, etc. complete removal of debris outside MD land.

Taking down shutter of any description n.exc 1 Sqm including easing & adjusting shutters and refixing in the same opening all as specified and directed.

Taking down shutter of any description exc 1 Sqm and n exc 2 Sqm including easing & adjusting shutters and refixing in the same opening all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and directed.

S&F Plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 2nd class hard wood glazed and skeleton shutters, 35mm thick, open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitread beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24- (a), supplied and fitted to chowkats.

S&F 35mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 12 mm BWP commerical ply . The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35 mm flush door shutters, solid core construction with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S & F 2nd class hard wood 30 mm thick glazed and skelton shutters for window, open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitread beads for securing gauge etc, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24 (b).

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingwith prelam sheet

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side Prelam PVC sheet used instead of plain colour PVC sheet with solvent cement for stiles and top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour Prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

Providing and fixing of double rebate openable/fixed windows made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer in Charge.Make NCL Window

Providing and fixing fixed louvers fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) with thickness of 0.58mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33 x 58 mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws. Make :NCL Ventilator

Hacking out old broken glass (any thicknes, size, quality or desctiption) from metal frame including punching or drillilng out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square/rectangular n.exc 0.50 sqm in each panes complete all as specified and directed.

S&F 4mm figured glass pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S&F in stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with stainless steel wire staples/beeds all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with stainless steel wire staples/beeds all as specified and directed.

M&L Pre-laminated particle board, Exterior grade 18/19mm thick, pre-laminated both side with decorative choice lamination and 3mm thick teak wood edging of all around and including taking down complete all as specified.

S&F Butt hinges 100mm mild steel cold rolled, medium weight all as specified and directed.

S&F Butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodised and fixed, type C-21 of size 100mm

S&F Butt hinges 75mm mild steel cold rolled, medium weight all as specified and directed.

S&F 150mm long aluminium, anodized barrel tower bolts of extruded section

S&F 100mm long Aluminium, anodized barrel tower bolts of extruded section all as specified and directed.

S&F in 100mm long aluminium anodized handles cast type anodised all as specified and directed.

S&F 150mm long aluminium handles, cast type anodized all as specified and directed.

S&F 300mm aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy

S&F Hasp & staple aluminium anodised, safety type, including bolt to hinge plate and fixed with screw 100mm size all as specified and directed.

S&F 40mm flaps width (when open) continuous (Piano) hinges mild steel bright finish or electrogalvanised all as specified and directed.

S&F in repair door spring with 300mm mild steel rat rail rod pattern of standard quality including roller and roller plate complete Helical spring) all as specified and directed.

S&F Gate and shutter, hooks and eyes 150mm aluminium plate type all as specified and directed.

S&F 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

S & F 50mm long butt hinges med wt cold rolled mild steel and fixed all as specified and directed.

S&F lInd class HW small fittigs such as Hings blocks, shaped door and window stopes and the like all necessary labour, articles n.exc 200 Cu cm each all as specified and directed.

S&F in repair 18mm thick factory made PVC sheet one side prelam sheet kitchen cabinet shutter .The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for making edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc. Complete all as per direction of Engr-in- Charge manufactures specification.

S&F in repair factory made PVC shelf /partition of required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the front of the shelf / partition to be edge lipped by 18mm width x 1mm thick PVC Sheet of density 600 Kg/Cum manufactured by ISO 9001 - 2015 Cerfified campany , using solvent cement etc.complete as direction of Engr-in-Charge manufacturers specification and drawings.

S&F stainless steel self closing hinge of 75 mm size for PVC door shutter complete all as specified and directed.

S&F 50 X 15 mm size magnet door catcher for closing for PVC door shutter complete all as specified and directed.

S&F 100 mm size MS mat / glossy finish handle complete all as specified and dirceted.

S & F modular type stainless steel basket size 24 x18 x 6 inches (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arranement complete all as specified and dirceted.

All as per item no above but basket size 20 x18x 6 inches complete all as specified and dirceted.

S&F in repairs Stain less steel brackets for suitable 25mm dia curtain rods all as specified and directed complete.

S&F 25mm dia Stainless steel curton rod fixed complete all as specified and directed.

M&L Preparation of New Wood surface and applying two coats of synthetic enamel paint over a coat of pink primer over 10cm width or girth complete all as specified and directed.

Preparation of New Steel surface and applying two coats of synthetic enamel paint over a coat of red oxide over 10 cm width or girth complete all as specified and directed.

Cutting holes in stone/brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1;2:4 type B1 exceeding half brick but not exceeding one brick all as specified and as directed.

S&F framed work as in doors or gates of angle or other section with gussest plates, rails, braces, etc, complete drlled for fixing of steel sheeting or other covering doors etc, to be prepared for hanging and sliding with and including either hooks and hinges or steel hunging door fitting and fuxing complete conferming to gde Fe 410-w.

S&F Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for foor frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

S&F frame work such as grills, gratings etc with ends of bars shoulders and or reverted or forged into spikes, framed guard bars and similar work conferming to FE 410-0 or Fe 310-0.

M & L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:6 surface finished even and smooth without using extra cement complete all as specified and directed.

M&L Preparing of New surface of wall and applying two coats of distemper oil bound over chalk whiting priming coat all as specified and directed.

M&L Preparation of Newly plastered surface and applying three coats of white wash on Walls complete all as specified and directed.

M/S GARG CONSTRUCTION

AGARWAL BUILDERS

Jamna Constructions