Special Repair works to the existing 114 Nos of PC/HC Quarters at Pothanur in Coimbatore District under priority based and Monsoon related works for the year 2024-2025

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.6 : Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

2.6: Supply and filling of 40 mm HBSJ

2.7: Supply and filling of 20 mm HBSJ

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

ANNEXURE I 2.1.3 : Supplying and Filling with crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) using Fly ash bricks of size 230x110x70mm (using crushed stone sand) with admixture

10.2.1.1 : Brick partition work in C.M. 1:4 using Fly ash bricks of size 230x110x70mm (using crushed stone sand) 110 mm tk (B.P.) with Admixture a) In Foundation & Basement

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

21.5.5.1 : Supply and fixing Solid core flush door shutter of thickness 35mm b) Door size 0.9m x 2.10m (Single Leaf)

23.2.1 : 4mm thick pin headed Glass panels with Aluminium beedings

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) Mixed with Super Plasticiser

35.1.2: Spl. Ceiling plastering in C.M. 1:3,10 mm tk.(using crushed stone sand) Mixed with Super Plasticiser

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.2 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In Ground Floor. (using crushed stone sand)

56.4.2 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F. (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

383: S&F of Cuddapah sink 600 x 600 x 200mm

ANNEXURE II A1: Clean removal of the old cement plastering both inside and outside from the existing walls of brick masonry without damaging the existing structure and surroundings and clearing the debris away from the site

A2: Dismantling the damaged brick works of cement mortar in all floors without affecting the adjacent structures including the cost of required tools and plants and scaffolding, if necessary and clearing the debris away from the site etc., all complete. a) walls under 3m Height

A3: Painting the old walls with two coat of ready mixed Plastic Emulsion Paint of first class quality paint of approved colour and shade over a priming coat, including thorough scrapping, clean removal of dirt and dust etc., complete

A4: Painting the old walls with two coat of Oil Bound Distemper of approved brand over cement plastered wall surfaces including cost of paints, putty, brushes, watering, curing, etc., all complete

A5: White washing two coat using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding etc., complete in all respects.

A6: Painting one coat the old iron work and other similar works such as PVC / ASTM pipes,kerb stone and grills with one coats of approved first class synthetic enamal ready mixed paint in addition to one coat of approve quality and shade etc., complete in all respects.

A7: Painting the old wood work with one coat of approved first class synthetic enamal ready mixed paint in addition to one coat of approve quality and shade etc., complete in all respects.

A8: Pointing the Pressed Tile over the roof with cement mortar 1:3 (One of cement and three of sand) including cost of all materials and labour charges for pointing, curing etc., all complete.

A9: Supplying and fixing of 25W LED Street light fittings with including cost of material, and labour charges for fixing etc

A10: Supply and fixing of 4' 18 watts LED Tube Light

A11: Supply, assembling and Charges for fixing following Electric Celling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete with 300mm down rod, canopies, capacitor, shackleblades with speed regulator (resistance type) suitable for operation on 230 volts 50 HTZ single phase AC supply conforming to ISS No.374/79 and provided with insulation .

A12: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring) a. Light point with ceiling rose

b. Light point without ceiling rose

A13: Run off main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable (open wiring)

A14: Supplying and fixing of water tight Bulk head fittings with guard, suitable for 12W LED lamp

A15: Supply and fixing of 12 watts LED bulb (Superior variety)

A16: Supplying and fixing of 9W LED bulb (Superior variety)

A17: Supplying and fixing of following dia Gun Metal Valve (Heavy duty) Confirming to I.S Specifications including cost materials and fixing labour charges etc., all complete a) 32mm Gun metal Valve

b) 25mm Gun metal Valve

A18: Damp proof course in CM 1:4 (One of cement and four of sand) 12mm thick mixed with approved quality of water proofing compound (superior variety and got approved from Executive Engineer before use) @ 1Kg. per bag of Cement (50Kg. bag) including finishing, curing etc., complete

vkpbuilders (BID ID -1187501)

VELMURUGAN (BID ID -1187494)

M/s.V.S.D CONSTRUCTION (BID ID -1187284)