SPECIAL REPAIR TO INTERNAL ROAD AT CHQ CQM AND 1 TT BN OF AMC C AND C UNDER GE EAST LUCKNOW.

Amount

M&L for repair to pot holes n.exc 1 sqm each including sweeping free from dust and mud or water scroing sunken surfaces in roads, paths etc cutting around edges to at least 25 mm in depth making good by by applying tack coat with bituminous primer using paving bitumen VG 10 grade @ 5 kg per 10 sqm, putting in premix as specified for thin bituminous carpet (2.5 cm thick) well rammed and sealed with premixed sand seal coat (6.8 Kg of binder with 0.06 Cum of sand) again well rammed (including supply of premix binder and sand) including rolling depth of potholes n exc 30 mm complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 Sqm & depth exc 50 mm and n exc 100 mm complete all as specified and directed.

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) with @ 4% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver, rolled and compacted with 8 to 12 tonne power roller complete all as directed and directed.

M&L for preparing black top surface by brushing with wire brushes for removing caked mud etc. using mechanical compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 @ 5.00 kg per 10 sqm complete all as specified and directed.

M&L for 30 mm thick (consolidated thickness) Bituminous premix semi dense asphaltic concrete with 5.50% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver rolled and compacted to required camber, gradient and for uniform smooth surface by using power roller 8 to 12 tonne capacity complete all as specified and directed.

M&L for providing and laying 2.50 mm thick hot applied thermo plastic road marking materials in uniform thickness with glass beads as per clause No 803 of MORTH specification including cleaning of roads surface, heating the material within specified temperature limits for marking with all necessary arrangements required complete all as specified and directed.

S&F "Cat Eyes " of size width not more than 130 mm and height not more than 20 mm made out of strong engineering high impact resistant polymer with electronic welded lenses for retro reflective in dry and wet weather conditions along road complete all as specified and directed. Make: Avery Denission/3M/Dark eye/Stimsonite

M&L bituminous premix semi dense asphaltic concrete with 5.50% binder content (Bituminous grade VG-30) by weight of total mix poured in the forms of requisite heights shape and width for rumble strip/speed breaker after lifting of forms, surface finished to required shape and well compacted complete all as specified and directed.

Supply and fixing M.S pipe having 75mm outer dia, thickness 1.4mm and 1200mm length,duly powder coated in black/white colour and to be embedded in PCC 1:3:6 Type C2(using 40mm graded stone aggregate) with 3 nos x75mm high intensity prismatic(HIP) reflective tapes and MS pipe having powder coated jali & mesh for reflector portion & for anti theft.Below the reflective band of red/yellow/white colour high intensity micro prismatic type - IV tape (As per IRC 67/2010) of 75 mm each shall be provided complete all as specified and directed. Note: Necessary excavation for embedding of M S delinator shall be deemed to be included in the rate quoted against this item.

S&F with stainless steel frame including necessary clamps etc; retro-reflrctive, Double sided, road Name, signboards comprising of 4mm thick aluminium composite panel,( ACP) mill finished or PDVF cotated or as specified as base board, micro prismatic retro-reflective sheet and electro cut coloured overlay film. The aluminium composite panel (ACP) shall have thickness of 4mm with 0.45mm thick skin of aluminium on both sides. The ACP shall be routed, folded and fixed on the stainless steel frame with VHB tape, 24mm wide and 2.3mm thick provided through out the lenght and breadth of the frame including riveting at the right angle face of the frame with pop riveting or with self taping SS screwed 5mm dia spaced not more than 300mm center to center ebsuring that no riveting is seen on either face of the frame. On the front and back face of the ACP, micro prismatic retro-reflective sheet conforming to Type-XI of IRC:67:2012 shall be pressure fixed as background sheet which will be over laid with electro cut transparent film of approved make and colour to create a desired road name information message. the rate shall include all materials, labour, equipments, fabrication, transportation, erection installation and incidentals complete all as specified and directed. (Note :- Stainless steel frame shell be measured and paid saperatly in respective item)

S&F 50mm dia and 1.80mm thickness of stainless steel pipe for framing of sign board including cutting, welding and framing of stainless steel stucture complete all as specified and directed.

Excavating in post holes (or similar works ) each n exc 0.50 cum getting out returning filling in and ramming earth or rubble mixed with earth around in layer n exc 25 cm in soft/loose soil complete all as specified & directed.

M&L for PCC 1:3:6 type C- 2 using 40mm graded stone aggregate as in foundation filling & mass concrete complete all as specified and directed.

BHARAT ASSOCIATES PVT LTD

M/s Ramesh Chandra

M/s Ram Singh Agarwal

Matrubhoomi Construction