REPAIR/REPLACEMENT OF PLUMBING, SANITARY FITTINGS, PETTY REPAIR, AC SHEET, FALSE CEILING, JOINERY, TILING FLOORING AND CONNECTED WORKS IN CITY AREA UNDER AGE B/R-I, ALWAR

Amount

Disconnecting & dewatering of PVC overhead tanks, scrubbing the inner surfaces, cleaning & removing all scales, dirt etc from mouth of circulating pipes, washing the tanks with fresh water and disinfecting the same by flushing with liquid chlorine or any other equivalent chemical, reconnecting & refixing in position after cleaning for tank capacity n exc. 500 ltrs each including marking the date of cleaning with white paint & stencil all as required & directed.

All as per item No 1.00 above but exc 500 ltr & n exc 1000 ltrs capacity.

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door resecuring and door easing etc. including petty repairs material like screws/nails, plug etc. to make it functional. Note: Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid.

S&F in repair MS conduit pipe bright finished 19/20mm dia as in curtain rod including suitable brackets for pelmet box complete set all as specified and directed.

S&F in repair powder coated stainless steel drapery rod of 20 mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed.

S&F in repair powder coated stainless steel drapery rod of 25mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed.

Hacking out old broken glass of any thickness/size of any description from steel frame fixed with clips and putty and S&F with 4mm thick ordinary sheet glass fixed with clips and putty completed in squares not exc 0.50 Sqm each pane all as specified and as directed.

All as per srl item No 7.00 above but 4mm thick figured glass, pin head type.

Hacking out old broken glass of any thickness/size of any description from aluminium/ steel frame and M&L 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified.

All as per srl item No 9.00 above but exc 0.5 sqm in each pane complete all as specified.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed tinned tacks or GI wire stampe or nails and screws complete all as specified.

S&F in repair 0.56mm thick aluminum sheet with nails to door shutters all as specified.

Taking down carefully anodized aluminium doors/ windows /ventilators frame including glazed shutters & builder’s hardware complete of any size and any description and refixing in the same opening after carrying out necessary repair & replacement of unserviceable components / hardware to make it fully functional complete all as specified & as directed. Notes :- (i) Quoted rate shall deemed to include supply & fixing of new joining cleat, aluminium beading, glazing clips, rubber packing, stays including cutting of old styles etc & adjusting the same appropriately as directed. (ii) Glazing, new aluminium sections for frame/shutters, builder’s hardware such as handles, hinges, door closure, floor door spring shall be measured & paid for separately. (iii) Loose corner joints of frame & shutters shall be tightened by providing suitable cleats made out of aluminium angle of appropriate size fixed with nut & bolts to make the joints at 90º.

S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos), suitable handle (1 No) complete all as specified & as directed.

S&F anodized aluminium door shutters, aluminium section weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified & as directed.

S&F powder coated aluminium anodised grill of any colour and approved pattern for windows/ ventilators/doors complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F sheet glass ordinary quality,in squares n.exc 0.5 sqm each 4.80 mm thick complete as directed.

S&F in repair door closer hydraulically regulated, designation No. 3, aluminium (Die cast) body, universal type (ISI marked), complete all as specified & as directed.

M&L in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repair, with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existing surfaces complete all as directed.

S&F in repair brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified.

S&F in repair MS helical door spring 300mm size with roller base plate fixed to wooden or steel frames with welding etc complete all as specified.

S&F MS helical door spring 300mm size with roller base plate fixed to wooden or steel frames with welding etc complete all as specified.

S&F in repair 100mm long aluminum anodised hasp and staple complete all as specified.

S&F in repair 300mm long aluminium alloy anodised sliding door bolt with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium and fixed all as specified.

S&F in repair aluminum anodised handle 100mm long complete all as per IS.

All as per item No 28.00 above but 150mm long.

S&F in repair 200mm long aluminum, anodized barrel tower bolts of extruded section all as specified.

All as per item No 30.00 above but 150mm long.

S&F in repair butt hinges 100mm long medium weight cold rolled MS to pressed steel/angle iron frames by welding all as specified.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed overall length 140 mm complete all as specified & directed.

Running welding in repair not exceeding 6mm thick all as specified and directed.

Welding in repair not exceeding 6mm thick and not exceeding 2.5 cm in length all as specified and directed.

Cutting holes in stone/brick walls in cement mortar for inserting holdfasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4, Type B-1, n.exc 1 brick wall.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins & other water supply fitting fixtures and any obstruction to water supply in rooms, requiring plumber work, clear air lock and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(soot), M-Seal, screws, nails to make water supply/plumbing lines functional and leak proof. Note: - Any item required to be replaced shall be paid under respective item and in that case this item shall not be measured and paid.

S&F in repair water supply fitting fixtures i.e. GI nipple, tank nipple, socket, union, elbow, tee, reducer of any size as per complaint for water leakage from taps, flushing cistern and other articles complete all as specified and directed.

M&L repair to leakage in floors of WC/Bath room/Kitchen by breaking of existing floor and providing new PVC (SWR) floor trap, suitable for type B pipes 75mm dia of outlet, plain with grating incl jointing with solvent cement and making good floor to match with existing floor all as directed.

M&L cement patch work on wall/floor etc area n.exc 1 sqm and depth n exc 15cm each complete all as specified and directed.

M&L filling of joints of tiles for WC/WHB corner/floor with white cement area n exc 1 sqm each complete all as specified and directed

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store all as specified.

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store all as specified.

S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F steel tubing medium grade 20mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F Rotational moulded polyethylene water storage tanks( white colour) (cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position inc all necessary fittings (nipple, socket, union etc) complete all as specified in SSR Part I including dismantaling existing water tanks and removing to store, complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks( white colour) (cylindrical vertical with closed top) of capacity 1000 Ltrs hoisted and fixed in position inc all necessary fittings(nipple,socket,union etc) complete all as specified in SSR Part I including dismantaling existing water tanks and removing to store, complete all as specified and directed.

S&F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed of 20mm dia, minimum weight - 210 gms complete all as directed.

S&F in repair brass gun-metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed.

S&F in repair vitreous China squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests connection to trap and to flushing pipe, etc. complete including making good to floor complete all as specified & directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed.

S&F in repair vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) alongwith preader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified & directed.

S&F in repair vitreous china wash basin white of size 550mm x 400mm (ISI marked) flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete fixed in repair all as specified and directed.

S&F in repair Jet spray chromium plated brass for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete.

S&F in repair PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC complete all as specified.

S&F in repair PVC connection of 15mm bore with 2 Nos. PTMT nuts, 450mm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed.

S&F in repair pipe of polyethylene of low or high density of PVC 32mm dia for low level cistern including all joints all as specified.

S&F in repair PVC internal fittings (kit) complete for low level flushing cistern tank, all as specified and directed.

S&F in repair towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed.

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete.

S&F in repair of spindles, phases of brass of any size required for bib taps, pillar cocks, stop cocks, angle valves, concealed valves complete all as directed.

S&F in repair MS grating CP 100mm dia, with hole for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as directed.

S&F in repair Pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified.

S&F in repair fancy type 3-Hole Basin Mixer without popup waste system but including plain waste 32mm size with aerator complete cast copper alloy, chromium plated, screwed down high pressure, with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore.

S&F in repair brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore all as specified and as directed.

S&F in repair brass chromium plated shower rose 65mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified.

S&F in repair Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws.

S&F sink with draining board made out of stainless steel 1mm thick sheet for kitchen with plug, washers, waste pipe, cast iron centilever bracket, connecting union over all minimum size 915mm x 460mm with bowl size 410mm x 330mm x160mm complete and fixed in repair.

S&F Stainless steel plate rack, 1.00mm thick for kitchen size 600mm x 900mm x 230mm complete all as specified & directed.

S&F in repair 32mm dia waste fittings, brass CP for glazed ware sinks, basin etc with long screwed shanks and fly nuts, flange and based in red lead cement and other and fixed all as specified.

All as per srl item No 71.00 above but 40mm dia.

S&F in repair mirror cabinet PVC frame of size 400mm x 500mm fixed to wall with rawl plug & stainless steel suitable size screws complete all as specified and direceted.

S&F in repair Looking mirror 5mm thick including cutting, grinding, polishing and chamffering of edges of glass, fixed with and including 20mm dia fancy type stainless steel fixers- 04 Nos complete fixed to wall all as directed.

S&F in repair bib tap cast copper alloy with crutch or butter fly handle 15mm bore fancy type chromium plated complete all as specified.

S&F in repair bib tap cast copper alloy with crutch or butter fly handle 15mm bore chromium plated complete all as specified

S&F in repair bib tap standard of PTMT any colour 15mm bore high pressurescrewed for iron pipe (Min. wt 90 gms) complete.

S&F in repair 15mm bore Stop valve, fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union.

S&F in repair 15mm bore Stop valve/angle valves,fancy type chromium plated cast copper alloy screwed down high presure, screwed both ends for iron pipe or for unions.

S&F in repair chromium plated health faucet for EWC with including PVC Connection 1m long suitable for 15mm bore with all connected fittings.

S&F in repair PVC water storage tank lid for cap 500 ltrs tighten with suitable size of nut bolts with spilt pin.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified & directed.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.

S&F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed

S&F in repair PVC (SWR) bends any radius 110 mm bore complete all as specified & directed

S&F in repair PVC (SWR) vent cowl 110mm complete all as specified & directed

S&F in repair 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed.

S&F in repair PVC (SWR),110mm junction single, (Single T) equal or unequal complete all as specified & directed

Taking down plaster in cement mortar over walls/ceiling including racking out joints & hacking for keys.

M&L rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L rendering 15mm thick in CM 1:4 on brick/stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement all as specified.

M&L rendering 10mm thick in CM 1:3 on concrete surfaces of ceilings finished fair and even etc complete all as specified.

M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

M&L preparation of new Plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening of approved make all as specified and directed.

Preparing newly plastered surfaces of walls & applying two coats of cement base paint complete all as specified and directed.

M&L preparing newly pastered surfaces & applying three coats of white wash on ceiling all as specified.

M&L preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified.

M&L preparation of new steel surface of any description, exc 10cm in width or girth when unconnected with other painting or when painted in a different tint with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M&L complete removal of existing treatment on walls and preparation of surfaces of walls and applying two coats of oil bound distemper (OBD) complete all as directed.

M&L complete removal of existing treatment on walls and preparation of surfaces of walls and applying two coats of oil bound distemper (OBD) over a coat of 1 mm thick birla care putty complete all as directed.

M&L preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified & as directed.

M&L brooming down old decorated surfaces of wall, plastered or unplastered including cornices, pilasters etc and applying one coat of white wash, complete, all as specified and directed.

M&L preparation of old decorated plastered/unplastered surfaces of ceilings & applying one coats of white wash complete all as specified.

M&L brooming down old decorated surfaces of wall, plastered or unplastered including cornices, pilasters etc and applying one coat of colour wash, complete all as specified and directed.

M&L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L preparation of old decorated plastered/unplastered surfaces of wall and applying one coat Plastic emulsion paint on walls complete all as specified & directed.

M&L preparation of old decorated plastered/unplastered surfaces of wall and applying one coat of exterior emulsion paint (exterior grade) on walls complete all as specified & directed.

S&F in repair teak wood lipping 6mm thick fixed with nails to 18/19mm thick block board or veneered particle board complete all as specified.

S&F in repair 6mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work etc including taking down existing frame work complete all as specified & directed.

S&F in repair 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc. including taking down existing frame work complete all as specified & directed.

S&F 75mm extruded brass handles, fabricated type polished complete all as specified & directed.

S&F width of flaps (when open) 40mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified & directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed.

M&L 25 thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles complete, all as directed.

M&L vitrified ceramic tiles 8 to 9 mm thick in light shade(square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick cement screed in cm 1:6 complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cm 1:4 complete all as specified.

M&L non skid ceramic tiles colored 300mm x 300mm x 7mm thick in floor set and jointed in neat cement slurry and pointed in white or coloure cement and over 15mm thick screed bed in CM 1:6 complete all as specified& directed.

M&L 40mm thick PCC 1:2:4 type B- using 20mm graded aggregate as in flooring complete all as specified & directed.

S&F glass dividing strips, 3 mm thick and 38mm width complete all as specified.

M&L 75mm thick PCC(1:3:6) type C1 (using 20mm graded stone aggregate ) as in plinth protection finished fair and even complete all as specified& directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off premises all as specified.

M&L glazed ceramic coloured tiles in vertical surface 450mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in CM 1:4 complete all as specified & directed.

M&L glazed ceramic tiles in vertical surfaces 300mm x 200mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L vitrified ceramic tiles 10mm thick (square/ rectangular) polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in wall, dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 10 mm thick rendwring in CM 1:4 complete all as specified & directed.

M&L 18/19mm thick granite slab of approved shade, as in platform etc, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) including required cutting to suit the size of oval type wash hand basin over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) set in cement mortar 1:6 as in coping of brick masonry wall kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin) corbels, brackets, etc. including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified& directed.

M&L providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame set in cement mortar Set in cement mortar 1:4, type B0, 1:2:4, (12.5mm graded stone agregate) complete all as specified & directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for in this Schedule all as specified & directed.

M&L roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) and tubular trusses including distance pieces, cleats etc Fe 410W (Gde E-250) Quality 'B' complete all as specified & directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified & directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed.

S&F mild steel screw bolts dia of Neck 5mm to 10mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm but n exc 10cm long compleete all as directed.

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed.

M&L brick work with fly ash bricks {As per IS-13757 (1993) burnt clay fly ash building bricks}, old sixe bricks) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

S&F in repair mild steel solid rubber beading of 20 to 40mm wide and 2 to 4mm thick fixing at bottom to existing doors complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets/AC boards, any thickness, including cover fillets and removing from site all as specified.

M&L false ceiling with ArmGyp-FB ceiling tiles of 595mm x 595mm (as approved by GE) fixed with and including galvanised iron powder coated inverted "T" or "L" section (concealed GI frame work) of mettalic or equivalent suspended from ceiling with provn of galvanised wire 4 mm dia and wall taping screw including butterfly clip, hold down clips for fixing the board to frame complete all as per manufacurers instructions all as directed and specified. (a) size of main tee 39 x 24.4 x 0.8 mm (b) size of wall angle 22.2 x 22.2 x 0.65 mm (c) size of grid 0.61 x 0.61 mm complete all as directed and specified.

M&L false ceiling with Armgyp-FB ceiling tiles of size 595 x 595mm, 9mm thick (as approved by GE) fixed with existing frame work fixing the board to frame complete all as per manufacurers instructions complete all as directed and specified.

Taking down chowkatts or frames with shutters (without taking off shutters from the frame) n exc 1.5 sqm each & removing to store.

Taking down Chowkatts or frames with shutters ( without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq m each & removing to store.

S&F 35mm thick 2nd class hard wood factory made panelled door shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified& directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified& directed.

M&L solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing.

M&L factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified & directed.

M&L Factory made solid skelton wire gauzed moulded pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmlycomplete all as specified& directed

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed.

S&F Butt hinges 100mm long medium weight, colled rolled mild steel complete all as specified& directed.

S&F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed.

S&F 150mm Aluminium handles, cast type, anodised complete all as specified & directed.

M&L preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified& directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.

M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC 1:2:4 type B-0 to match the existing floor.Fe-410 (Gde-E250 quality A).

M&L providing and injecting chemical emulsion for post constructional anti termite treatment alongwith the external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litre peri linear meter incl drilling and plugging 12mm dia holes with CM 1:2 to match the existing floors drilling and plugging holes etc all as specified and directed.

M&L providing and injecting chemical emulsion for post constructional anti termite treatment of soil under existing floor using chemical emulsion 300mm apart incl drilling and plugging 12mm dia holes with CM 1:2 to match the existing floors using emulsion @ 1 litre per hole complete all as specified and directed.

M&L providing and injecting chemical emulsion for post constructional anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same with CM 1:3 & painted with white or coloured paint all as specified and directed.

Demolition mud in roofs, any thicknes, including plastering, existing tretement and cleaning (whether full thickness removed or only or part there of) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but n.exc 1.5 Km complete all as directed.

M&L PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified & directed.

M&L 15mm thick screed laid in CM 1:4 with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified & directed.

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces over bituminious primer complete all as specified & directed.

M&L APP based polymeric membrane weighing minimum 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) land on primed surface by torch on method with overlaps as directed complete all as specified.

Supply only integral waterproofing compound.

S&F Solid PVC wall lining consisting of 5mm thick decorative colour laminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

M&L PCC Type D2 1:4:8 (40mm graded stone aggregate) cement concrete in foundations, filling and mass-concrete complete all as specified & directed.

M&L plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 W (Gde E-250) Quality B, complete all as specified & directed.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L & J type hook and cranked complete all as specified.

Dismantling framed timber scantlings 40 Sqcm and over in section in any position complete all as specified.

shiva construction

Hitesh Construction

M/s ASK Enterprises

J.J.ENGINEERING

GAR CONSTRUCTIONS

M/s S Amarjit Singh