SPECIAL REPAIR TO CERTAIN MARRIED ACCOMMODATION AT AF STATION BIHTA

Amount

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.. Note : - All demolished items/ debris to be removed out side of MoD land.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. Note : - All demolished items/ debris to be removed out side of MoD land.

Demolition of Brick work or stone boulder Masonary built in cement mortar complete all as specified and as directed.

Demolition of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc (each layer) laid, bedded and pointed in any mortar including removal of debris/muds etc complete all as specified and as directed. Note : - All demolished items/ debris to be removed out side of MoD land.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and finally cleaning the surface with wire brush to remove old treatment to lay PCC padding complete all as specified and as directed. Note : - All demolished items/ debris to be removed out side of MoD land.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed.

Dismantling water tanks and removing to store (capacity exc 250 & n exc 500 ltrs) complete all as specified and as directed.

Dismantling existing cast iron soil vent pipe of 100 mm internal dia, fixed to wall or laid in trenches incl all fitting & accessories complete all as specified and as directed.

Dismantling existing cast iron soil vent pipe of 75 mm internal dia, fixed to wall or laid in trenches incl all fitting & accessories complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, frame work etc complete all as specified and as directed.

Taking down rain water PVC pipes (110mm dia size any pattern) ,including all fittings complete all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site complete all as specified and as directed.

Taking down of shutters of any description exc 1.00 Sqm but n. exc 2 Sqm each complete all as specified and as directed.

Taking down cement plaster on brick or stone walls & chajja including raking out joint, hacking for key,scrubbing downwith water complete all as specified and as directed.

Taking down or up 15 mm bore galvanised iron tubing and connection including fittings complete all as specified and as directed.

Taking down or up 20 mm bore galvanised iron tubing and connection including fittings complete all as specified and as directed.

Taking down or up 25 mm bore galvanised iron tubing and connection including fittings complete all as specified and as directed.

Taking down or up 40 mm bore galvanised iron tubing and connection including fittings complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan socket or power) complete fittings such as switches, sockets, ceiling rose, pendents, regulators etc complete as ordered and removing retrived materials and making good the disturbed surface of wall, floors, ceiling etc complete all as specified and directed.

Taking down old unsv light fittings from wall surface/ceiling of any position and making good the disturbed surface of wall, floors, ceiling etc complete all as specified and directed.

Taking down carefully unserviceable sub main wiring of 4 sqmm/6 sqmm three run and type including making good the disturbed surfaces of walls, ceilings etc including two coats of white /colour washing/ distempering etc to match the existing complete all as specified and as directed.

Taking down carefully unsv MCB SP/SPN/Isolator of any type ratings/size complete all as specified and as directed.

Taking down carefully unserviceable DBs/metal enclosures/meter box of any type and capacity including wooden board and making good the disturbed surfaces of walls, ceilings etc including two coats of white/colour washing/ distempering etc to match the existing complete all as specified and as directed.

Taking down complete XLPE cable 25sqmm 4 core including old unserviceable bricks complete all as specified and directed.

M&L 75 mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded aggregate) as in floor complete all as specified and as directed.

M&L for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as on floor complete all as specified and as directed.

M&L for 50mm thick PCC (1:3:6), type C-2, using 20 mm graded aggregate and finished the surface fair and even, in plinth protection even and smooth without using extra cement complete all as specified and as directed.

M & L for PCC 1:3:6 type C-0 using 12.5mm aggregate crushed stone aggregate as in filling back side of pressed steel door/window frames complete all as specified and as directed.

M&L for forming construction joints 30mm deep x 10 mm wide filled with sealing compound of Grade 'B' complete all as specified and as directed.

M&L RCC (Nominal mix) type B1, 1:2:4 (20mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like incl formwork etc complete all as specified and as directed.

M & L of Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

M & L for 15 mm thick rendering in CM (1:6) on vertical surfaces of brick walls finished even and smooth without using extra cement complete all as specified and as directed.

M & L for 15 mm thick rendering in CM (1:4) on vertical surfaces of brick walls finished even and smooth without using extra cement with using water proofing compound (WPC will be measured and paid separately) complete all as specified and as directed.

M & L for 5 mm thick rendering in CM (1:3) on ceiling surfaces of finished even and fair without using extra cement complete all as specified and as directed.

M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed 1:6 complete all as specified and as directed.

M & L glazed ceramic coloured tiles of approved quality ISI marked (450 X 350 X 7 mm / 450 x 300 x 7 mm / 350 x 250 x 7 mm thick) as in vertical surfaces such as skirting dados etc set jointed in neat cement slurry and pointed in coloured cement to match with the tiles including 1:4 cement plaster 10 mm thick on brick work and concrete surface complete all as specified and as directed.

S & F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed.

S & F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed.

S & F 500 ltr capacity rotational moulded polyethylene water storage tanks three layer with all fittings of GI (cylindrical vertical with closed top) hoilsted and fixed in position complete all as specified and as directed.

S & F in repair 20 mm bore brass ball valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S & F in repair 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and water tank nipal fixed complete all as specified and as directed.

S & F in repair chromium plated fency type stop cock/angular cock, cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore complete all as specified and as directed.

S & F in repair chromium plated concealed type stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore complete all as specified and as directed.

S & F in repair Chromium plated 125 mm long shower rose with or without swivel joints, any size, incl fixing to steel pipe or union complete all as specified and as directed.

S & F in repair 15 mm bore chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and as directed.

S & F Soap Dish brass chromium plated decorative type approximate size 160x160x90mm complete all as specified and as directed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with wall complete all as specified and as directed.

S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including trap set in and including concrete and connection to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and as directed.

S & F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and as directed.

S & F in repairs of vitreous china wash hand basin, white, flat back of size 630 x 450 mm including waste coupling, CI brackets, PVC waste pipe and connection 32 mm bore complete all as specified and as directed.

S & F in repairs of vitreous china wash hand basin, white, flat back of size 450 x 300 mm including waste coupling, CI brackets, PVC waste pipe and connection 32 mm bore complete all as specified and as directed.

S & F in repairs of 15mm bore pillar taps, fancy type, cast copper alloy with capstan heads, Decorative type chromium plated screwed down, high pressure screwed for iron pipe complete all as specified and as directed.

S & F in repairs of stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union of overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F 1mm thick stainless steel kitchen plate rack of size 750mm x 900mm best quality assembled with brass washer and nut and bolts including hooks (spoon/cup holders) complete all as specified and as directed.

S & F 100 mm dia spun cast iron soil waste and vent pipes sand cast in any length with or without laid in trenches or in floor with cement joints complete all as specified and as directed.

S & F 75 mm dia spun cast iron soil waste and vent pipes sand cast in any length with or without laid in trenches or in floor with cement joints complete all as specified and as directed.

S & F 100 mm dia spun cast iron soil waste and vent pipes sand cast in any length with or without ears, fixed with wall with cement joints complete all as specified and as directed.

S & F in repairs of 100 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured) complete all as specified and as directed.

S & F in repairs of 75 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured) complete all as specified and as directed.

S & F of cast iron cowls of 100 mm bore pipe complete all as specified and as directed.

S & F in repairs cast iron floor trap with chromium plated graating of 100 mm size including jointing to waste pipe with cement joints etc complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

M & L for 15 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms (including a hole of gas pipe) and like incl 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and similar situations complete all as specified and as directed.

M & L for PVC (SWR) pipe of 110 mm bore single socketed in any length with rubber ring joint fixed to wall with suitable clamps of adequate numbers etc complete all as specified and directed.

S & F PVC SWR bends 110 mm bore complete all as specified and as directed.

S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and complete all as specified and as directed.

S & F for 30 mm thick factory made solid panel PVC door shutter conferming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings and complete all as specified and as directed.

S & F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and as directed.

S & F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

S & F glazed/wire gauged/skeleton shutter 35 mm thick out of (well kiln seasoned)2nd class hard wood (hollock) the size of rails and style as per IS chemically pressure treated in factory gainst termite infestation prepared to receive wire gauge (without sash bars) edges of frame chamfered or rounded fitted with cut and mitered beads, complete all as specified and as directed. (Note : Wire gauge/glazing to be measured and paid separately).

S & F factory made 40 mm thick plain, framed, panelled shutter (two panel) with lock rail using 2nd class HW (Hollock) kiln seasoned andchemically pressure treated the size of rail and style as per IS 1003 (Part-I) and panel insert of 9mm thick BWP commercial facing plywood or 12mm veneered particle boards with commercial ply complete all as specified and as directed.

S & F for 100mm long mild steel butt hinges, heavy weight cold rolled mild steel and fixed complete all as specified and as directed.

S & F 150 mm long aluminium anodised handles, cast type complete all as specified and as directed.

S & F for 150 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed.

S & F for 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S & F 300 mm long aluminium alloy, anodised, sliding dooor bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S & F mild steel 300 mm ordinary rat tail rod pattern springs including roller & rooler plate complete all as specified and as directed.

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm complete all as specified and as directed.

S & F in repairs of harrison rail mild steel chromium plated of 25 mm dia for curtain rod fixed with two Nos of brackets for each rail complete all as specified and as directed.

S & F factory made steel ventilators with top hung shutter incl hinges steel pegs & stays complete with one shop coat of red oxide primer complete all as specified and as directed.

S & F steel windows with side hung double shutters (inside guaze &out side glaze shutter) with pressed steel box type frame,including box type hinges, with steel handles steel peg stay complete with & without glazing bars, frame fixed with MS screw 100mm dovetailed or welded including one shop coat zinc chromate primer Ref TD-CE/ALD/TD/-172 sheet 1/2 & 2/2 (PWF windows ) (PCC filling for window frame shall be measured and paid separate.)

M & L for framed work such as grills, gratings,etc,with ends of bars shouldered and/or riveted ,or forged into spikes, framed guard bars barred iron doors, ladders, framed balusters ,walk ways railings, framework of water tanks/water cooler and similar work conforming to Fe-290 Gde-E-165 including one shop coat zinc chromate primer complete all as specified and as directed.

S & F stainless steel wire cloth 0.63mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F sheet glass 3 mm thick ordinary quality & glazing with rubber gasket in square n.exc 0.5 Sqm in each pane complete all as specified and as directed.

S & F 3 mm thick figured glass, pinhead type in squares n.exc 0.50 sqm each pane complete all as specified and as directed.

M & L for complete removal of existing treatment of wall and applying two coats oil bound distemper over a coat of alkali resistant primer over a coat of 1 mm thick wall care putty in two different layers complete all as specified & as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M & L for preparation of new plastered surfaces of walls, chajjas, columns, beams etc and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS- 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silcon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and as directed.

M & L for complete removal of existing treatment by washing, rubbing down and stopping of painted surfaces of walls, chajjas, columns, beams etc and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS- 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silcon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and as directed.

M & L for providing cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in roof padding, roof kerbs (rounded or chamfered on edge) etc complete all as specified and as directed.

M & L for rendering 10 mm thick of concrete surfaces built in cement mortor 1:4 with water proofing compound. (NOTE :- WPC shall be measured and paid seperatelly).

M & L for appling bitumen primer @0.30 Ltr/sqm on any type surface complete all as specified and as directed.

M & L for applyng tack coat of hot blown bitumen 85/256 grade @1.2 kg per Sqm including cleaning surface complete all as specified and as directed.

M & L applying polymeric water proofing membrane consisting of 90-100mm micron thick central core of HMHDPE film and min weight 3kg/Sqm shall be laid with 100mm side/end lap over hot bitumen on prepared surfaces as per manufacturer's instruction and under supervision of technical representative of manufacturer complete all as specified and as directed.

M & L for 40 mm thick brick tiles laid on bedding of 15 mm thick cement mortar (1:6) and joints grouted flush in cement mortar (1:3) on treated roof including removal of old tiles complete all as specified and as directed.

S & F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M & L for providing and fixing gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

S & F of hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40 mm long complete all as specified and as directed.

M&L Peparation of old painted wooden surfaes of any dscription over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L Peparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of new wood base surfaces applying one coats of pink primer and two coats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described complete all as specified and as directed.

M & L for preparation of new steel surfaces and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer of any description, over 10 cm in width or girth, not otherwise described complete all as specified and as directed.

M & L for preparation of primer coated new steel surfaces and applying two coats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described complete all as specified and as directed.

M & L for preparation of old decorated plastered surfaces of wall and applying two coat of white wash complete all as specified and as directed.

M & L for preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of new plastered surfaces of wall and applying two coats oil bound distemper over a coat of alkali resistant primer over a coat of 1 mm thick wall care putty in two different layers complete all as specified & as directed.

Material and Labour for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 1.5 sqmm single core 1100 volts grade FRLSH PVC insulated, unsheathed multistranded copper conductor with and including PVC concealed conduit pipe 20 mm medium grade with all fittings including Modular metal flush box minimum 1.6 mm thick, Modular white plate with frame of required module at site, fixed with chromium plated screws and washers for switches and sockets, on walls, surface on roofs and beam etc including PVC insulated copper earth continuity conductor 1.5 Sqmm cable connected to common earth dolly including cutting chases in walls / floors for concealed conduit for following point wiring as under and making good disturbed surface area by cement mortor (1:3) and to match with the existing surface / colour by using existing oil bound distemper / white wash complete all as specified and directed for the following :- Note :- Cutting chase to wall wherever required shall be included in the rate quoted for poing wiring.

One light point or one fan point controlled by one switch with cable 1.5 sq mm.

One 2pin/3pin switch socket out let 5 amps on independent board with cable 1.5 sq mm.

One 5 Amps socket point on same board with other switches

One bell/buzzer point controlled by one push button with cable 1.5 sq mm.

Material and Labour for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 2.5 sqmm single core 1100 volts grade FRLSH PVC insulated, unsheathed multistranded copper conductor with and including PVC concealed conduit pipe 20 mm medium grade with all fittings including Modular metal flush box minimum 1.6 mm thick, Modular white plate with frame of required module at site, fixed with chromium plated screws and washers for switches and sockets, on walls, surface on roofs and beam etc including PVC insulated copper earth continuity conductor 2.5 Sqmm cable connected to common earth dolly including cutting chases in walls / floors for concealed conduit for 3 pin 15/16 Amps socket outlet on independent board and making good disturbed surface area by cement mortor (1:3) and to match with the existing surface / colour by using existing oil bound distemper / white wash complete all as specified and directed Note :- Cutting chase to wall wherever required shall be included in the rate quoted for poing wiring.

Material and Labour for modular bell push flush type 5/6 Amps SP AC circuit 240 V complete all as specified and as directed.

Material and Labour for modular bell (Ding-Dong) 230 volts, single pole complete all as specified and as directed.

M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete all as specified and as directed.

M&L for Modular socket outlet 2 in 1, 5 pin, 6A, flush type white finish complete all as specified and as directed.

M&L for Modular switch 1 way 16A, 1 module, flush button single pole, one way, complete all as specified and as directed.

M&L for Modular socket outlet 2 in 1, 6 pins, 6A and 16 A, combined 2 module white finish complete all as specified and as directed.

Material and Labour for ceiling rose surface bakelite 65x50 mm 3 terminals complete all as specified and as directed.

Material and Labour for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S & F LED lights fitting 1x 20W, 220V, AC decorative box type aluminim die cast housing with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC die cast aluminium housing with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as spedified and directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F LED bulb1x9W/1X10W complete all as specified and as directed.

Supply , fixing & testing in replacement exhaust fan, steel body AC single phase 230 V of size 300 MM sweep with blades and frame and lowers making good of disturbed surface complete including submit the old to MES store complete all as specified and as directed.

Supply , fixing & testing in replacement ceiling fans complete with blades, down rods, electronic regulator 2- Module and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) including submit the old to MES store complete all as specified and as directed.

Supply , fixing & testing in replacement electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate NRV, connection piece etc including submit the old to MES store complete all as specified and directed.

S & F MCB SPN 6-32 Amps, 'C' series, 240 V complete incl making connections complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing 415V, 10 KA 'C' curve miniature circuit breaker (MCB) of four poles and current carrying capacity 40 to 100 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

S & F MCB DB SPN 8 Way with 100 Amps rated busbar, Double door, 240 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing including taking down old u/s MCB DB SPN 8 Way complete all as specified and directed.

S & F sheet metal enclosures MCB DB TPN DB 4 Way with 200 Amps rated busbar, Double door, 415 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing including taking down old u/s MCB DB and MCBs complete all as specified and directed.

M & L for sub main wiring complete with two runs of 4 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 4 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed. Note :- Meausrement of sub main wiring shall be taken One running meter=two run main running+ one run earth running

M & L for sub main wiring complete with two runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 6 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed. Note :- Meausrement of sub main wiring shall be taken One running meter=two run main running+ one run earth running

Taking out old unserviceable earthing and M & L for new Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.0 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized earth lead wire 4.0 mm dia as earthing lead by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified. NOTE: (i) The unit rate includes earth wire and protection pipe up to (maximum 7.5 metre from earth plate) earth point/test point.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in loose / soft soil and getting out for under ground cable / erection of poles, stays etc complete all as specified and as directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed by Engr-in-Charge.

Removing of excavated material n, exc 50 mtr away and depositing where directed at a level n, exc 1.5 mtr above the starting point complete all as specified and as directed by Engr-in-Charge.

M & L for bricks subclass ‘B’ old size laid flat perpendicular to the direction of cable for protection of cable complete all as specified and as directed by Engr-in-Charge.

M & L for sand cushioning for cable with river washed sand and pinning to provide required cover as per SSR Part –I complete all as specified and as directed by Engr-in-Charge.

Supply, laying, connecting and testing XLPE cable underground PVC insulated and over all sheathed with aluminium conductor heavy duty 1100 volts grade size 25 sqmm 4 core ,walls fixed with saddles and making hole pass and making good distrurbed surface,ducts passing through pipe for road crossing etc complete all as specified and as directed by Engr-in-Charge.

M & L for medium grade GI 15 mm bore tubing with all fiitings laid down on trenches/walls complete all as specified and as directed by Engr-in-Charge.

M & L for medium grade GI 25 mm bore tubing with all fiitings laid down on trenches/walls complete all as specified and as directed by Engr-in-Charge.

M & L for medium grade GI 40 mm bore tubing with all fiitings laid down on trenches/walls complete all as specified and as directed by Engr-in-Charge.

M & L in repair for Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe 15 mm bore and fixed complete all as specified and as directed by Engr-in-Charge.

M & L in repair for Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe 25 mm bore and fixed complete all as specified and as directed by Engr-in-Charge.

M & L in repair for Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe 40 mm bore and fixed complete all as specified and as directed by Engr-in-Charge.

M/s SKP CONSTRUCTION

SANYOG CONSTRUCTION PRIVATE LIMITED

MITHILA BUILDERS AND ENGINEERS

PAPPU ROY CONSTRUCTION

Anjali Constructions

Sabitri Jhunu Enterprise

prabhawati shanti automobiles