ADDN/ALTN AND SPL REPAIR TO JCOS GOVT MD ACCN AND OR GOVT MD ACCN AT ME LINE OF 505 ABW UNDER GE NORTH DELHI CANTT-10

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as specified and directed.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as specified and directed.

Taking down door shutters of any description exc 1 Sqm & n.exc 2 Sqm each and refixing in the same opening after easing and adjusting complete all as specified and directed

Dismantling of brick tiles, terracing tiles, single layer from roof laid, bedded and pointed in any mortar all as specified & directed.

Removal of Mud from top roof slab, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Demolition of reinforced cement concrete (Reinforcement cut as required to facilatate demolition) of any description and in any position not otherwise specially provided

Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for 25mm thick cement concrete type B1, 1:2:4 (20mm graded aggregate as flooring and to receive floor tile all as specified and directed.

M&L for ceramic coloured floor tiles 600mm x 600mm of 8-10 mm thick as in floors over 15mm thick screed bed in cement mortar 1:4 set and jointed in neat cement slurry and pointed in coloured cement. all as specified and directed. NOTE:-Contractor may use vitrified tile instead of ceramic tile of same size without any financial effect.

All as per Sr Item No 10 here in before but in vertical surface as skirting, dado and risers to steps over and including10 mm thick rendering/backing coat in cement mortar 1:3 etc.complete all as specified and directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors over 15mm thick screed bed in cement mortar 1:4 set and jointed in neat cement slurry and pointed in coloured cement. all as specified and directed

M&L glazed ceramic coloured tiles in vertical surface 450x350x7 or 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:3) and finished rough, complete all as specified & directed.

M&L high strength outdoor endura or equivalent full body vitrified tiles 10-12mm thick (Square or rectangular) area of each tile exc 0.08 Sqm but n exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and includig 15 mm thick screed bed or bedding layer of cement mortar (1:4). including roughning of surface and cement mortar bedding all as specified and directed.

All as per Sr Item No 14 here in before but vertical surfaces as in skirting over 10mm thick backing coat in cemen mortar 1:3 all as specifed and directed.

M&L Granite 20mm thick jet black ( of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over 15mm thick screed bed in cement mortar 1:6) all as specified and directed Note:-Minimum rate of granite should not be less than MR of Rs. 150 per Sqft excluding GST.

M&L Granite 20mm thick Jet Black ( of any type) work (table rubbed and polished) in for wall lining (veneering to wall) 10 mm thick in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed of granite complete all as specified and directed. Note:-Minimum rate of granite should not be less than MR of Rs. 150 per Sqft excluding GST

S&F FRP (Fiberglass reinforced plastics) chajja 4mm thick of fibreways or equivalent in required colour size and design made by resin transfer moulding (RTM) machine technology having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 Nos vertically and 1 Nos horizontally 50x2 mm thick M S flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete all as specified and directed in one single piece casted monolithically including all necessary fittings. The FRP Chajja should be manufactured using unsaturated polyster resin as per IS:6746 duly reinforced with fiberglass chopped strand mat (CSM) as per IS:11551 complete all as specified and directed with protective gelcat ultravoulet coating on top for complete all as specified and directed resistance fromm the extreme of temperature, weather & sunlight. (Note - All the gaps are sealed using silicon sealant from tip and bbottom to make it water proof incl grouting in existing wall and fitting with suitable screws and fixtures upto 3rd floor level incl all labour material tools and plants, scaffolding safety arrangements quality checks complete all as specified and directed in all respect all as specified and directed.

M&L Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed all as specified and directed (reinforcement to be measured separately).

Mild steel TMT bars 10 mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works rough finished surfaces of concrete complete all as specified and directed.

Demolition of Brick masonry built in cement mortar incl all quions, arches, pillars, in any position and any place etc and removal of debries out side from MOD land all as specified and directed

M & L Brickwork with subclass 'B' Brick straight or curved on plan exc 6m mean radius, built in, built in cement mortar 1:6 complete all as specified and directed.

All as per Sr Item No 23 here in before but except brick complete all as specified and directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers i.e.. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) mixed with WPC finished even and fair etc complete all as specified and directed.(Note:- WPC shall be measured and paid separately.)

M&L rendering 10 mm thick in CM 1:6 on internal brick/concrete wall surfaces of any description, and finishing the surfaces even and fair without using extra cement complete all as specified and directed .

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and fair without using extra cement complete all as specified and directed.

M&L for Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for Preparing old decorated plastered surfaces of ceiling and applying one coats of white wash complete all as specified and directed.

M&L for Preparing new plastered surfaces of wall and applying two coats of oil bound distemper white or tinted over primer on plastered surfaces complete all as specified and directed.

M&L for Complete removal of existing treatment and preparing old decorated surfaces of wall and applying two coats of Oil Bound Distemper over a coat of primer all as specified and directed..

M&L for preparation of new plastered surfaces of wall and applying two coat of cement based paint over a coat of cement primer all as specified and directed.

M&L for complete removal of existing treatment of wall including cornices etc. by washing, rubbing down and stopping holes, and applying two coats of cement base paint of approved shade over a coat of primer complete all as specified and directed.

S&F framed work such a grills, gratings, etc, with ends of bars shouldered and /or riveted, or gorged into spikes; door framed guard bars; barred iron doors; ladders; framed balusters; walk ways railings ; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed

S&F Mild steel, plain , black sheet of 1.60mm thick in wall cladding steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up mitred angles etc as required complete all as specified and directed

Supply only integral water proofing compound complete all as specified and directed .

Taking up or down steel water tubing and connections 15mm bore pipe complete all as specified and directed.

Taking up or down steel water tubing and connections 20mm bore pipe complete all as specified and directed.

Supply, laying and fixing of 20mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, Tee, MTA/MBTA,FTA/FBTA, Tank adaptor, Union, etc suitable for 15mm bore bath fittings). (Note- length of pipe with fittings to be measured for payment, no extra payment should be made for fittings).

Supply and laying of 25mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, Tee, MTA/MBTA,FTA/FBTA, Tank adaptor, Union, etc). (Note- length of pipe with fittings to be measured for payment, no extra payment should be made for fittings).

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked, white coloured, double layered hoisted and fixed in position including connecting up pipes including dismantling of PVC water tanks complete all as specified and directed.

S & F 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 25 mm bore size (Minimum weight 210gms), complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore including demolition/taking down PVC/CI drain/Rain water pipe complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm bore including demolition/taking down PVC/CI drain/Rain water pipe complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 75 mm bore including demolition/taking down PVC/CI drain/Rain water pipe complete all as specified and directed..

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110 mm bore including demolition/taking down PVC/CI drain/Rain water pipe complete all as specified and directed.

S&F PVC (SWR) bends any radius, 75 mm bore, complete all as specified and directed.

S&F PVC (SWR) bends with access door any radius, 75 mm bore, complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110 mm bore, complete all as specified and directed.

S&F PVC (SWR) junction single (single T), equal or unequal, with access door 75 mm bore, complete all as specified and directed.

S&F PVC (SWR) junction single T equal or unequal, with access door 110 mm bore, complete all as specified and directed.

S&F PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.

S & F Stainless steel plate rack (utensil rack) of size (600 mm x 750 mm) and depth 300 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts complete all as specified and directed.

S & F Soap dish disc (oval) type, mild steel chromium plated of approximate size 100 x 50 x 10 mm, complete all as specified and directed.

S & F sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass self 12 cm wide with chromium plated bracket guard and railing 60 cm long.

S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate mix with WPC complete all as specified and directed

S & F stainless steel sink with drainage board, made out of 1.00 mm thick sheet with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 915 mm X 460 mm with bowl size 410 mm x 330mm x 160 mm complete all as specified and directed.

S & F Tubular towel rail of brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flanges complete all as specified and directed.

S & F in repair Stop valves or angle valve cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15 mm bore complete all as specified and directed.

S & F in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed.

S & F Brass CP WHB mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

S & F Brass CP wall mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

S & F Brass CP wall mixture for sink, mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

S & F in repair Brass chromium plated shower rose 65 to 90 mm size with swivel joints, wall flange complete all as specified and directed.

S&F in repair 10 litre capacity PVC low level flushing cistern with dual flush type‘ white’ with inlet, float valve including bracket with 32mm dia PVC waste/flush bend pipe appx 600 mm long complete all as specified and directed.

S & F in repair PVC connection 600mm long and15 mm dia with brass fly nut at both ends complete all as specified and directed.

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete all as specified and directed including provn of cement concrete bedding and 'P' or 'S' trap, outgoing flushing pipe, anti syphonage pipe etc complete all as specified and directed.

S & F vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste CP coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed. Note :- Pillar tape shall be measured as supply only under respective item

S & F 32 mm dia bore Low density polyethylene pipes (LDPE)of pressure rating 6kgf/cm2 fixed complete all as specified and directed to walls,ceilings or in floors etc for WHB and sink complete all as specified and directed.

M&L for Plain cement concrete type C-1, 1:2:4 (using 20 mm graded stone aggregate as in fixing of hold fast of door frame in wall all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC Sheet suppling & fixing in opening as per specification & drawing.

Factory Made Solid PVC Moulded Door Shutter with hard core black board, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelaminate sheet colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing in SSR

S&F 30mm thick Factory made wire mesh solid WPC door shutter consisting of density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified Company, Door to be paneled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm x25mmx2mm and 32mm long steel screws drilled suitable to pass through Other hardware’s should be fixed with 19x6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings. Note: Fixture/fittings shall be measured & paid under relevant item.

S&F Flush shutters 35 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides with leaping and beading complete all as specified and directed.

S&F for steel windows fabricated from roll formed sections made of galvanized steel colour coated powder coated (Base steel as per Sqm IS-513 D quality galvanized as IS 277 with zinc coating of 120 GSM with total coated thickness of 0.60mm. The coated section shall be with primer coated of primer of 7 microns thick, finish painted with a polyster paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure plyster powder upto 50-60microns thick with the following specifications (a) Main frame 72mm x 55mmx0.58mm (b) Mullion 72mmx50mm x0.58mm(c) Glazed/guazed shutter frame 47mmx20.20mmx0.58mm (d) Glass beads size 12mmx12mmx0.58mm Accessories. Each shutter shall be provided the following fittings (a) Stainless steel pipe of hinges 01 set (b) Aluminium powder coated handle-04 Nos. Glass panes Glazed shutter and fixed glass provided with glass of 5.00mm thick float glass. WIRE MESH -Stainless steel wire mesh of 0.3 mm nominal dia of wire and average width of aperture 1.40mm. Grills window shall be provided with grill made of 10mm square MS bars welded to 12mmx6mm thick MS plate. Distance between bars should not be more than 12cm c/c. Total grill unit shall be enamel painted and fixed to window frame with screw. Note: The glazed/Gauged shutter including guard bars shall be measure once i.e. as per area of opening. No separate payment of separate shutter i.e. glazed and fly proof and guard bars shall be made. Area of shutter shall be the area of opening. The rate quoted by the contractor is deemed to inclusive of all aspects as specified in Drg No- CEDZ/TD/289 sheet 1 R/2 and 2R/2

Rolled mild steel sections conforming to Gde Fe-290-0 or Fe-165 as in coolar stand fixed into wall making hole and fixed with PCC, clamps etc similar work complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with stainless steel wire staples beads, tinned tacks to wooden doors shutters complete all as specified and directed.

Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including all assessary complete all as specified and directed all as specified.

S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made froms Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws all as per direction of Engineer -In-Charge Material test certificate and authentication should be compulsory provided by the manufacturing company for WC/Bathroom/Toilet/Kitchen & Cabinets

S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws all as per direction of Engineer -In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company for WC/Bathroom/Toilet/Kitchen and Cabinets.

S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified and directed all as specified.

S&F Brass handles,100mm long cast type, polished bright complete all as specified and directed all as specified.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed all as specified.

S&F floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete all as specified and directed all as specified.

S&F 4 levers brass cupboard locks grade-I, size 65 mm complete all as specified and directed all as specified.

S&F 150 mm long Stainless Steel barrel tower bolt with screws complete all as specified and directed all as specified.

S&F 200 mm long Stainless Steel barrel tower bolts with serews complete all as specified and directed all as specified.

S&F Stainless Steel butt hinges, 100 mm size medium weight, complete all as specified and directed all as specified.

S&F stainless steel handles 125 mm size cast type, complete all as specified and directed

S&F stainless steel handles 150 mm size cast type, complete all as specified and directed

S&F stainless steel, sliding door bolts with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate.

S&F Stainless Steel tubing 25mm dia grade 304,Sch 5 for curtain rod fancy type including fancy type CP brabs brackets (wall to wall or flush to wall) with finials or end caps decorative type as approved by GE for securing to curtain rod to wall in position, fixed in repair complete all as specified and directed.

M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

M&L cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight including necessary form work and complete all as specified.

M&L cutting crack to 'V' groove section in existing roof cleaning out wetting grouting with cement and sand slurry of 1:3 complete all as specified and directed.

M&L for cement concrete 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in levelling coarse over RCC slab to bring the desired slope up to six storied Bldg, using water proofing compound as per manufacturer instruction complete all as specified & directed. Note:- Water proofing compound shall be measured and paid separately.

M&L for APP based polymeric membrane plain finish minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints Dusting dry sand @ 0.75 Kg per Sqm and applying two coat of bituminous aluminium paint @ 0.10 Kg/Sqm over the complete membrane surface.

M&L for providing rust proof /anti corrosive treatment to bars :- (i) cleaning of all exposed bars (new & old) alround (ii) Apply a single coat of Alkaline rust converting primer on alround bars new & old as recommended by the manufactuer (iii) Apply two coats of Epoxy phenolic anti corrosive protective coat on bars alround new & old as recommended by the manufactuer. Note : Anti corrosive treatment shall be continuous espcially in the regions where pitting, imperfections, etc were present on the surface of the bars. It is important that the rear portions of re bars (those towards the concrete substrate) should not be left without coating.

M&L for providing PMM (Polymer modified cementitious mortar) :- (i) Dry sub strate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness. Note:- Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use. (iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed.

M&L for Providing & Pouring Micro concreting M-40 grade :- (i) Dry concrete substrate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound concrete substrate using approved spray machine & ensuring that no pin holes are visible. (In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above pour Micro concreting M40 grade, Make : MasterEmaco S46T of BASF or equivalent FOSROC/SIKA using approved mixing machines/pumping under pressure via approved pneumatic pump at the locations to be repaired in RCC beams & columns etc,. Adding of aggregates will be permitted only as per manufacturer’s recommendation without compromising the strength. The rate shall include cost of all materials (except re-bar) labour charges for mixing, pouring concrete, cost of tools, lead & lift of materials, transportation etc., to carry out the complete work complete all as specified and directed including M&L for use & waste of form work using steel sheets , steel bracing, propping etc around structural members where micro concreting to be done and keeping form work in position till required specified period complete all as specified and directed. Note : Form work shall be 100% leak proof. The cost of micro concrete M-40 grade & Epoxy bond coat is inclueded in this item.

M&L for use & waste of form work using steel sheets , steel bracing, propping etc around structural members where micro concreting to be done and keeping form work in position till required specified period complete all as specified and directed. Note:- Form work shall be 100% leak proof. For purpose of payment area in touch with concrete shall be measured.

S&F for stengthening existing reinforcement by use of mild steel bars of any dia , cut to length, bent to shape required, including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand brushing scrubing down concrete surfaces with wire brushes cleaning with water allowed to dry applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of a layer of epoxy adehessive on complete exposed surfaces of concrete and provide guniting in two layers over steel welded mesh 2 mm dia of wire and total aperture 75 mm, thickness of gunite n.exc 25 mm thick (average thickness) using cement mortar 1 :3 with OPC 43 grade cement mixed with polycrete admixture @ 2 % by wight of cement or as per manufactures instructions and finally applying cement plaster over gunite surfaces of required thickness to give an even uniform and smooth finish conforming to proper Geometrics in cement mortar 1:4 to match with the existing surface as in side and soffits of slabs,chajjas,fins,facias ,parapets ,columns and beams etc complete including necessary scaffolding ,shuttering necessary chased to brick work or RCC members at any height upto four storey buildings incl removing of small trees shrubs etc all as specified(Note: steel welded mesh to be welded with the existing reinforcement. The cost of welded mes his to be welded with the existing re-inforcement is deemed to be included in the quoted rate complete all as specified and directed.

S&F Factory Made double rebated extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made

M&L for cement concrete 1:4:8 type D- 2 (40mm graded stone aggregate) as in sub base, hard standing of 75 mm thick, complete all as specified and directed

M&L for Sand filling (sand cushioning) under floors or in foundations including watering and consolidations complete all as specified and directed

S&F machine pressed precast concrete rubber moulded interlocking coloured (Red and Yellow) paver block of approved pattern shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, complete all as specified and directed

M&L for rubber moulded coloured cement concrete Chequered tiles 300mm x 300mm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in cement mortar 1:6 all as specified and directed

S&F fibre glass reinforced translucent corrugated sheeting 2 to 3mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and directed

S&F steel work in tubular trusses, rafters and purlins including special shaped washer etc. complete using washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and directed

Excavation in post holes (or similar holes) each, n.exc 0.5 Cum getting out, returning, filling in and ramming earth or broken rubbles mixed with earth around, in layers n.exc 25cm in soft/loose soil, complete all as specified and directed

M&L for cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate in foundations, filling and mass concrete to fix post, complete all as specified and directed

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed

Taking down RCC jail from any position of any description, complete all as specified and directed

Description of Work / Item(s)

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Material & labour for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and modular metal flush box, modular white cover plate with frame, blanking plate etc suitable for up to required module etc complete and making good to the disturbed surfaces to match the existing complete all as specified and directed for the following :-

One light / bell point controlled by one, one way switch 06 Amps

One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.

One socket out let 5/6 amps point on the same board

One socket out let 5/6 amps point on the independent board

One bell/buzzer point controlled by one bell push button

All as per item No 2 here in before but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed.

S&F modular switch, 06 Amps, single pole, one way, 230 volts, one module and IP 20 protection complete all as specified & directed

S&F modular bell push with indicator, 06 Amps, single pole, one way, 230 volts complete all as specified and directed.

S&F modular switch, with indicator, 16 Amps, single pole, one way, 230 volts complete all as specified and directed

S&F modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified and directed

S&F modular socket outlet 02 in 01, 03 pin, 16 Amps, 02 module with shutter complete all as specified and directed

S&F ding dong bell, AC, 230 volts, single pole incl connection complete all as specified and directed

S&F ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module, humfree, AC, 230 volts, 120 watts incl connection complete all as specified and directed

S&F Ceiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified and directed.

S & F lamp holder, isolated body, with back plate suitable for batten/angle fittings complete all as specified and directed.

S&F in repair on wall / ceiling LED batten lighting fixture 20 watts LED 5700K (4'), with extruded aluminium heat sink, integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete all as specified and directed

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete all as specified and directedwith driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete all as specified and directedwith IP 65/66 protection complete. pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 50 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts & washers complete all as specified and directed

S&F in repair 10/12W LED TL fitting (2 fit) attractive wall mounted type suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed

S&F decorative wall mounting light SS finish fixture with extruded glass difuser suitable for up to 40 watt mini glass lamp, lamp holder, including 9 Watts LED bulb for fixing in decorative wall mounting light and all accessories pre-wired including connecting up including taking down of existing u/s light fitting complete all as specified and directed

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete including taking down the old one complete all as specified and directed by Engr-in-Charge.

S&F Sheet metal enclosure for 12 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete including taking down the old one complete all as specified and directed by Engr-in-Charge.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), IP-43 double door, Tripple pole & neutral with 200 amps rated bus bar, IP-20 protection, including four pole MCCB 63 Amps with blanking plates complete all as specified and directed.

S&F MCB, SPN, AC, 240 volts of 63 Amps capacity "B" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed

S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘B’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge.

Taking down ceiling fan any make from ceiling carefully, cleaning to remove any type of sticky dust with cleaning material as required and re-fixing in its original / desired location with necessary connection incl provision of cable from ceiling rose to connector of fan after repairing, greasing, oiling, replacement of minor items such as pins, nut bolts, flexible wire etc incl spray painting with synthetic enamel paint in white colour complete all as specified & directed

S&F (in replacement) industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB SP, AC, 230 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed

Supply and fixing of exhaust fan, steel body, AC, single phase, 230 V of size 300mm sweep with blades, frame & louver having 1400 RPM speed, 1600 CMH and including making of holes of suitable size and taking down old exhaust fan and depositing to MES store yard making good to the disturbed surfaces to match the existing complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm and including making of holes of suitable size and taking down old exhaust fan and depositing to MES store yard making good to the disturbed surfaces to match the existing complete all as specified and as directed.

M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed by Engr-in-Charge.

M & L Sub main wiring concealed type with two run single core cable PVC insulated cable with 6.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size, making good the disturbed surfaces complete.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. .

M & L Sub main wiring concealed type with two run single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size, making good the disturbed surfaces complete.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. .

Adhunik Builders (BID ID -3131684)

L G BUILDERS (BID ID -3131260)

M/S ANIL KUMAR (BID ID -3130449)

V r traders (BID ID -3130485)

A R construction (BID ID -3130314)

CHOPRA BUILDERS (BID ID -3131354)

ASSOCIATED CONSTRUCTION CO. (BID ID -3131479)

Adhunik Builders (BID ID -3131684)

Shri Balaji Construction (BID ID -3124968)

M/S ANIL KUMAR (BID ID -3130449)

ASSOCIATED CONSTRUCTION CO. (BID ID -3131479)

L G BUILDERS (BID ID -3131260)

A R construction (BID ID -3130314)

CHOPRA BUILDERS (BID ID -3131354)