Modernization of Nagapattinam Fishing Harbour in Nagapattinam District

Amount

Excavation By Boring of 600 mm wide trench in all types of soil, including pebbles, gravel, boulders to depth varying from -20.00m level to +2.40 m level above chart datum for construction of diaphragm wall including bentonite mud circulation/crane mounted grab all labour , equipments and machinery for excavation, hire charges for grab , crane etc, complete as per standard specification and as directed by the department officer.

Boring Through 600 mm dia liner tube in all type of soil strata including silt or clay sand and weathered rock . The rate should include the removal of bored material,cleaning the loose particle , bailing , chiseling and taking all measures to retain the side and prevent necking of line from bed level excluding installing of lines & driving of liners etc . complete complying with standard specification and as directed by the department officers.

Installing pitching and driving mild steel 6 mm thick liner of up to 600 mm inner dia in fine sand of clay & in all type of soil including all incidental charges machinary charges and labour for holding in vertical aligment in position for 800 mm dia bored cast in situ pile etc., complete and as directed by the departmental officers.

Supplying and fabricating of mild steel liner of 600 mm dia with ms sheet of 6 mm thick including transporting , bending of liner to the required shape and size including welding with standard electrode and required thickness of welding continuously to full length as directed by departmental officers

Removing by cutting M.S liner tube of 6 mm thick in 800mm dia pile to the required length of using gas cutter and chipping, cleaning out the depth etc. complete and also Dismantling, Clearing away and Carefully Stocking materials useful for the use for any thickness of walls.

Providing and placing insitu design mix(Ready mix concrete)reinforcement cement concrete of M35 (M.Thirty Five only) by weight basis using ordinary port land cement (OPC) 43 grade confirming to IS 8112 and as per table 5 of BIS-456-2000 with minimum cement concrete of 380 Kg/M3 (Three hundred and Eighty kilogram) and graded course aggregate using 20mm and 12mm gauge HBG stone jelly in the ratio of 70:30 (Seventy part of 20mm and thirty part of 12mm stone jelly) with maximum water cement ratio of 0.45 and using Superplasticizer 250 ml per 50Kg of cement but the rate excluding cost of steel reinforcement and form work etc. complete complying with standard specification. The rate is inclusive of cost and conveyance of all ingradient materials labour charges for weighing batching mixing laying tamping, vibrating finishing, curing and conducting sample standard cube test to ascertain compressive strength of concrete and including hire charges.

For Diapharagam wall and Pile

Providing and placing insitu design mix reinforcement cement concrete of M30 design mix using 20mm ISS HBG metal with minimum cement concrete of 320 Kg/M3 (Three hundred and Twenty kilogram) with maximum water cement ratio of 0.4 the rate excluding cost of steel reinforcement and including the cost of form work, labour charges for mixing, transporting laying curing, cofferdams, shoring, strutting etc. complete complying with standard specification. The rate is inclusive of cost and conveyance of all ingradient materials labour charges for weighing batching mixing laying tamping, vibrating finishing, curing and conducting sample standard cube test to ascertain compressive strength of concrete and including hire charges for cast in situ concrete.

For Beams and slabs

Earthwork excavation for foundation in all soils and sub soils and to the full depth as may be directed except hard rock requiring blasting inclusive of shoring , strutting and water where ever bailing out including necessary refilling the sides of foundation with excavated earth than and deposited the surplus earth as directed by department officer with all heads & lifts etc., completed as per standard specifications.

Cement Concrete 1:4:8 (One Cement four sand, eight aggregate) using 40mm HBG metal for foundation and Flooring including dewatering if found necessary and laid in layers of not more than 150m thick as per standard specifications.

Supplying and erecting steel centering including necessary supports for plane surfaces in foundation and basement for reinforced cement concrete works using M.S. sheets of size 90 cm X 60 cm BG 19 gauge of stiffened with mild steel angles of size 25 mm X 25 mm X 3 mm for boarding laid over steel acro span/wooden joist spaced at about 90 cm centre to centre and supported by the steel props/casurina of suitable diameter spaced at 75cm centre to centre etc. complying with standard specification complete in all floors. (The payment for centering shall be made only after the concrete is laid. The retrieved materials should be taken back by the contractor)

For column footing plinth beam staircase steps, piers raft beam raft slab etc.,

For Plain surfaces such as RCC slab, Beam, Bed Block, waist slab, landing slab, lintel etc.,

For Vertical surfaces such as sunshade boxing, vertical drops, facia for sunshade, canopy facia and other vertical walls etc.,

Providing and laying reinforced cement concrete of nominalmix 1:3:6(M 10) grade with 40mm and down size graded granite metal, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation, plinth and ground floor level for retaining walls, return walls, walls ( any thickness ) including columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, fillets etc, including cost of all materials, labour, machinery, curing etc., hire charges for complete as per specifications.

Supplying, fabricating and placing in Position Factory Fusion bonded Epoxy coated plain/ribbed HYSD

Pile and Diaphragam wall

Building and other

Supplying fabricating and placing in position of RTS rods for RCC works given including cost of steel and binding wire and labour charges for cutting, bending, tying and placing in position of grills apply etc. complete complying with standard specification as directed by the departmental officers. Adopting cost of rods as applicable for R.T.S rods

Dismantling of existing structure with suitable cement concrete, including T & P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres complete as per specifications. including hirecharges for dismanteling equipment and labour etc complete as directed by department officer.

Plain Cement concrete 1:1 1/2:3 using 20 mm gauge HBG stone jelly including cost and conveyance of all materials to site excluding centering strutting but including laying curing etc., complete.

Routine load test BIS 2911 part 1 section and part II test of single / group piles under routine test, test load inclusive all charges for extension of cutting piles that may be necessary erecting load platform in the manner acceptable and approved by the engineer with labour and other incidental charges for loading and unloading the test loads and hire charges and all other incidental retaining the test load for 24 hours for 100% capacity and calibration chart for pressure gauge are to be produced to the Executive Engineer before commencing day of the test. Calibration of pressure gauge must be done before taking up the first load test in every site of work for piles 60 cm dia etc complete in all respect as directed by the departmental officers.

Providing and fixing MS angle of size 75x75x10mm on one side and including cost of angles and labour charges for fixing etc complete as per standard specifications.

Supplying, handling, transporting and fixing in position of Tyre fender of 1000mm dia with anchor bolts, U hooks, chains shall be G.I Coating with 80mm micron including cutting, concrete chipping, drilling, grouting, necessary welding with deck reinforcement steel and necessary coal tar painting (wherever required) including all materials. labour, consumable items, machineries, tools. tackles, transportation etc., as per specification and complete as per directed by departmental officers (Rate as per Quotation)

Supplying transportation and fixing bollards of 5 tonne bollards as per standard drawing and painting two coats of finishing and paint over one coat of primer to the Satisfaction of Engineer in Charge.

Supplying and fixing of G.I mooring ring with hooks & eye as specified in drawing including labour charges etc., complete.

Formation of Guide bund using clay soilin conveyance with tippers with a lead of 10 KM in layers of suitable thickness, depending upon type of compaction equipment, and not exceeding 23 cm thickness, breaking clods, watering to OMC (Optimum moisture content) and compaction of each layer to 95% Proctor density through deployment of appropriate compaction equipment (8-10 T power roller / vibratory power roller / short width (+/-0.90n width drum) power roller or vibratory power roller / fuel-operated or electrically operated vibratory plate compactors, ensuring compaction of designed bund section including side slopes complete as per specifications.The rate includes seigniorge fees also.

Supplying and filling up the empty cement gunny bags with sand stitching them and dumping adjusted the casurina poles and pullies driven in the sea for the formation of bund as directed by departmental officers.

Supplying and stacking casurina poles and pullies of good quality work site as directed by the departmental officers.

Casurina poles of dia 13cm to 15cm (providing at distance of 60cm c/c ) both sides

Casurina bullies of dia 5 to 8 cm at 25 cm c/c and cross ties

Pointing the edge and driving the casurina poles in to the sea bed below G.L. as directed by the departmental officers.

For Ist 1m depth from the sea bed.

Driving the casurina poles in to the sea bed beyond 1m depth (or) part of the sea bed from the sea bed as directed by departmental officers.

Casurina walling pieces of 4cm to 5cm diameter including fixing nails and tying with ropes as directed by the departmental officers.

Formation of Embankment with sand gravel mix with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement etc., complete as per specifications which includes of cost and conveyance of gravel and sand, watering charges & campacion by vibratory roller

Open Earthwork excavation for foundation of either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m after breaking of clods complete as per specifications.

Filling available excavated earth ( excluding rock ) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 2 m. including cost of all labour complete as per specifications.

Supplying and Filling the basement with river sand in layers of not exceeding 15cm thick well rammed and consolidated etc.

Providing and Filling in foundation with Soling / trap broken metal 40mm to 80mm. and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift. complete as per specifications.

Providing and laying in position plain cement concrete of nominal mix 1:3:6 using 20mm and down size graded granite metal, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour HOM of machinery, curing complete as per specifications

RCC in cement mortar 1:1 ½ :3 (one cement, one and half sand three aggregate) using 20 mm HBG jelly including cost and conveyance of all materials to the site excluding centering shuttering and cost of reinforcement grill in position but including laying, curing and finishing etc.

Upto Basement

Upto Ground floor

Providing and filling sand in foundation upto plinth to required depth for sub soil treatment including watering ramming with all lead and lift complete as per specifications.

Providing and laying M.S rod/bar of 63mm dia and 11.5m length with Epoxy coating covered by PVC pipe of size 110mm dia and fixing in to diaphragm wall/dead man with all fixtures, etc complete and fixing 10mm thick M.S anchor plates using 63mm nuts per plate for anchoring the tie rod to to dead man including applying two coats of epoxy paint etc., complete As directed by the department officer.

Providing and fixing 10mm thick MS anchor plate using 63mm nuts per plate for anchoring the tie rod to deadman including applying two coats of epoxy paint etc., complete

Providing supplying and fixing of 110mm dia PVC Pipes 6kg/cm2 pipe for inserting 63mm dia tie rod for Dead man rod in suitable position and pasting the pipe and screwing and laying the road both the ends in concrete etc complete as directed by the department officer.

Brick Work in cement mortar 1:5 (one cement five sand) using country bricks of size 8 3/4" x 4 1/4" x 21/4" for foundation and basement and superstructure and finishing neatly curing etc., complete complying with standard specifications and as directed by the department officers.(Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost). etc., complete.

For foundation and basement

In Ground Floor Superstructure

In First Floor Superstructure

Plastering with cement mortar 1:5 (one cement and five sand) 12mm thick in all floors using fine river sand including neat finishing, curing, etc., complete complying with standard specification and as directed by the department officers.

Special ceiling plastering in all floors and finishing the exposed surface of RCC items of work such as slab, beam, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with cement mortar 1:3 (One cement and three sand) 10mm thick including hacking the surfaces and providing cement mortar nosing, beading for sunshade, staircase, step, landing slab etc., including neat finishing and curing etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc Electrically Operated Type (exceeding 12 sqm. Area)

Painting new iron work with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors including cost of painting materials, brushes, putty, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer. (The quality and colour of paint should be got approved by the departmental officer before use on work).

Distempering the walls two coats with best oil bound distemper of approved quality (to be approved by the Executive Engineer before use on works) over one coat of primer for newly plastered wall including preparation of surface and finishing neatly including cost of all materials, brushes, scaffolding charges etc., complete complying with standard specification and as directed by the departmental officers.

Cement painting two coats with best and approved quality of cement paint over one coat of primer using white cement over plastered surface including cost of cement paint and other materials, brushes, scaffolding charges etc., including clearing the surface by manual labour etc., complete complying with standard specification and as directed by the departmental officers.

Weathering course using best quality of broken brick jelly of 20mm gauge in pure slacked lime (no sand to be added) the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer and consolidated to the required finished thickness and slope by beating the concrete with wooden beater of approved pattern and keeping the surface constantly wet by sprinkling lime jaggery water etc., complete complying with standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of pressed tiles of size 23×23×2cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound (confirming to Indian standard specification) 2% by weight of cement used and pointed with the same mortar including mixing of red oxide etc., complete complying with standard specification and as directed by the departmental officers.

Boat Building Winch set a. Capacity: 150 ton for boat pulling power. b. Drum size: 40 inch x 2 nos. c. Drum side plate: 1200mm OD and 30mm thickness. d. Drum center pipe: 350mm OD and 320mm ID. e. Drum length: suitable for 32mm wire rope 500mtrs winding in per drum. f. Gear box: 5 stage worm reduce helical gear box. g. Ratio: 150;1 (in multi stages) h. Pulley: 20 inch x 6 inch i. Motor: 30Hp kiriloskar make/3phase/900rpm J. Control: by panel board. k. Base frame: 4,800mm x 1,200mm x 150mm fitting on motor and gear box with winch assembly. l. Base bolt: 40mm x 1200mm length.

CRADLE SET a. Capacity: 150 ton load. b. Size: 3.5mtrs x 9.5mtrs. c.Structure: 300mm equal ISMB (joist) and 200mm ISMC' d. Front and back cover with 10mm plates and all joist & channels reinforcement by 12mm, 16mm, & 20mm plates. e. Toying hook size: 350mm x 300mm x 40mm plate,10nos. f. Roller size: 350mm OD 320mm ID seamless pipe, 12nos, both end 120mm shaft 600mm length with 120mm ID metal push 2nos in every rollers with dummy 19mm thickness dummy flange, all bolt & nuts ¼ inch x 3inch galvanized. g. Chock: 6nos for boat with cradle balancing stool, made by 75mmx 75mm x 10mm MS angle. (As per Quotation)

PILLER HOOK a. For drive of boat direction, 'U' type and size 50mm x 1500mm.

STEEL ROPE a. 32mm make Orient (or) equalent brand, both end sling crimping.

ROPE PULLEY a. 16inch OD size, heavy duty casting body and open & close type.

GATE CHAIN a. MOC 25mm diameter, for fix 1 no pulley for boat reverse pulling purpose.

LAYING WOOD a. Size of 350mm x 50mm thickness x 10 feet length

POWER CABLE a. For winch motor to panel board connect.

D' SHACKLE a. 55ton 2 nos, 35ton 2 nos and 17ton capacity 6nos,for pillar hook with rope pulley connect

Charges For Winch, Cradle, Steel Rope, Base Frame With Foundation Bolt, Rope Pulley & Etc Tuticorin To Tharangambadi Transport.

Charges for Erection and Commissioning Labour (Include Accommodation, Food & Transport)

Providing and placing insitu design mix (Ready mix concrete) reinforcement cement concrete of M35 (M.Thirty Five only) by weight basis using ordinary port land cement (OPC) 43 grade confirming to IS 8112 and as per table 5 of BIS-456-2000 with minimum cement concrete of 380 Kg/M3 (Three hundred and Eighty kilogram) and graded course aggregate using 20mm and 12mm gauge HBG stone jelly in the ratio of 70:30 (Seventy part of 20mm and thirty part of 12mm stone jelly) with maximum water cement ratio of 0.45 and using Superplasticizer 250 ml per 50Kg of cement but the rate excluding cost of steel reinforcement and form work etc. complete complying with standard specification. The rate is inclusive of cost and conveyance of all ingradient materials labour charges for weighing batching mixing laying tamping, vibrating finishing, curing and conducting sample standard cube test to ascertain compressive strength of concrete and including hire charges.

Plain cement concrete 1:2:4 (One cement, two sand, four aggregate) using 20 mm HBG metal including cost and conveyance charges and curing etc.

Brick partition wall in 0.115 cm (4¼“) thick in c.m. 1:3 using country bricks of size 8 ¾”x4¼ “x 2¼” including plastering in cement mortar 1:5 – 12mm thick

Supplying and paving granite sinthetc gray stone slab of 18mm to 20mm thick laying in Cement mortor 1:3 and pointing with C:M 1:1 including cost of materials, conveyance charges and curing charges etc.

Dadooing the walls with colour designed glazed tiles of 300mm x 450mm x8mm and set in cement mortar 1:2 (one cement & two sand) 10mm thick and pointing with same coloured cement using at 0.30kg/m2 by weight of cement used including finishing the joints neatly finish in the surface etc., complete compaying with standard specifications and as directed by the departmental officers. (The tiles used on the works should be got approved by Executive Engineer before use on the work).

Providing Ceramic tiles of approved make,shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1:3 mix, flush pointing with white cement using colour pigment , including cost of materials, labour, curing, complete as per specifications.

Painting two coats of newly plastered wall surface with ready mixed Plastic emulsion paint of first class quality and of approved colour over a priming coat including preparing the surface clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on work).

Supplying precast RCC Door frames without bottom sill plate as specified frames cross section size of 100mm x 65mm with Rebate of size 30x12 mm and provided with Teak war puddauk wood wodden plugs rigidly fixed with reinforcement to fix kinges for left, right (or) double opened shutter including Teak bar pudduck wood. Provisions to fix up toner bolt/ ultraps mortice lock 3 No. of wooden to fix hold fast uldrops on either faces of the vertical frame with are coming in contact with Masonry on either sides and frames being cost or specified as separated vertical and horizontal pieces to be joined at site of work including of smoothly finishing without any plaster applied on the frame. Three exposed face and having the face coming in the contract with Masonry structure as its natural surface and finish not weather than grade in 20mm and reinforcement with place section which is not less than 50% of the sectional area of the concrete member of shead in ISS 23/1983 including all materials and labour charges etc.

PVC Panel door shutters hollow type -200mmx20mm panels with 1mm wall thickness for panels and styles and rails of suitable size with 2mm wall thickness suitably reinforced using MS angle /Flat including cost of nessary Aluminium hinges and other furniture fittings etc complete .

Supplying fabrication and fixing in position of anodized aluminum natural colour matt finishing sliding window in two track .all the two shutters with sliding arrangements the bottom section should have gutter arrangements so as to drain the water entering and made with extruded aluminum section for outer frame with necessary accessories such as rubber beading , aluminum clips , handle, stoppers and fixing 4mm thick clear sheet glass including required fittings etc complete as per standard specification.

Supplying and fixing grills to doors, windows and ventilators etc. using necessary MS flats (or) square rods for inner members and outer members which should be fixed to window frames as directed and design given by the departmental officers inclusive of cost of providing one coat of best quality red oxide primer etc., complete complying with standard specification and as directed by the departmental officers .

Providing vitrified tiles 600 x 600x8mm of approved make, shade and size for flooring laid on a bed of 12mm thick cement mortar 1:3 mix, flush pointing with white cemnt using colour pigment, including cost of materials, labour, curing complete as per specification.

Supplying and Fixing in position best quality PVC soil/waste pipes of various sizes having ISI mark and providing leak proof joint including fixing to the valve, specials clamps, etc. and making connection to all sanitary fittings dismantling masonry for RCC works where ever necessary and making good the dismantled the portion to the original condition complying with standard specification for external sanitary arrangement using PVC pipes and specials as directed by the Departmental officer.

Supplying and fixing in Position ORIYA TYPE Indian water closet of size 580x440mm white Glazed Earthen ware of approved quality ‘P’ Trap or ‘S’ Trap conforming to IS 2556-Part with sand gushes and forming flooring all-round the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one lime two sand four brick jelly) 10 mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes any dismantling brick masonry, reinforced cement concrete roof and making good the disturbed portion to original condition without leakage etc. complete

Providing and fixing white vitreous china clay, water closet European type ( Pedestal type, P-trap ) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications.

Supplying and fixing in position best quality approved make white glazed earthen ware wash hand basin of size 550x400 mm with a pair of cost iron brackets including cost of 15 mm dia bars chromium plated pillar tap 32 mm dia C.P. waste 32 dia PVC waste pipe with rubble plug and chin 15 mm dia GM wheel valve. 15mm dia bars nipple 15 mm dia nylon connection etc. including the fixing the wash hand basin in the wall in position with a pair of C.I. brackets. (White with pedestal)

Supplying and fixing in position best quality Bevelled Edge Mirror of size 600x450 mm shelf type with necessary plywood backing rubber buttons brass chromium plated screws , plug etc. Complete complying with standard specification.

Supply and fixing of 2000 liters capacity PVC water tank with IS specification IS 10701/96 the tank is meant for outdoor (or) indoor use complete with removable hinged top locking arrangement and to make provision to fix watre supply pipe lines, necessary man hole with cover and etc. (The water tankshould be got approved by the EE before use on work)

Supplying and fixing in position MS square pipes of size 150mmx150mm of 6mm thick for holding the galvunum including dismantling the masonry etc. wherever required to fix the pipe and making necessary holes in MS square pipes for fixing the clamps and bolts including cutting ,welding and pointing the MS square pipe with one coat of primer and making good the damaged portions to the original conditions etc..complete complying with standard specification and as directed by the departmental officers .

Supplying, laying and jointing UPVC pipes of approved quality, of the following sizes, including cutting, threading and fixing UPVC specials, but excluding cost of such specials, and fixing to wall with necessary TW plugs, clamps and screws, making good the dismantled portions to original condition, with necessary scaffolding charges. Above Ground Level (Internal Water Supply Arrangements).

40mm dia

25mm dia

20mm dia

Supplying and fixing in position UPVC specials such as union, elbow, tee, reducer, reducer elbow and hex nipple of various sizes best quality confirming to I.S.S and providing leakproof joints including fixing to wall and giving connection to the original condition etc., complete complying with standard specifications.

40mm UPVC coupling

40mm UPVC Tee

40mm UPVC Elbow

25 mm dia UPVC Elbow

UPVC Reducer Elbow 25 mm x 20 mm

20 mm dia UPVC Reducer Elbow 20 mm x 15 mm

Supplying and fixing Nickel Chromium plating tap 15mm dia. brass C.P. Screw down tap/pillar tap/Swam neck tap/ including cost of shellac, thread etc. complying with standard specification and including cutting, threading wherever necessary.

Supplying and fixing in position of Gun metal gate value/wheel value of the 40 mm sizes including cost of shellac, thread etc. including labour for cutting, threading of G.I. pipes etc. complete.

Providing and fixing in position 25mm nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and equipments with all leads complete as per specifications.

Construction of Inspection Chamber of inner clear size of 0.60 X 0.60 meters and average depth of 0.75 m with a base concrete of 100 mm thick cement concrete 1 : 5 : 10 (One cement, five sand and 10 aggregate) the chamber should be constructed in brick masonry 230 mm thick in cement mortar 1 : 5 using country brick of size 8 ¾ X 4 ¼ X 2 ¼ . The inner side of chamber plaster with cement mortar 1 : 3 -12 mm thick. The chamber top covered with R.C.C. precast slab 1 : 2 : 4 (one cement two sand and four aggregate) 5 cm thick. The rate is including cost of materials labour etc completed including plastering with C.M. 1:3 -12 mm thick on inner side and top covered with RCC pre cast slab of 5 cm thick etc complete complying with standard specification

Supply and fixing in position of Indian make white glazed earthen ware lipped mouth flat back urinal of best approved quality with GI pipe connection of suitable length 32 mm bell mouthed PVC connection, 15mm & Gun metal wheel valve fixing the urinal to the wall in position with necessary tow plugs/ clamps/ screws, shellac etc. including dismantling masons if necessary and be doing the same to original condition, fixing the 15mm dia GI pipe connection and wheel valve painting the pipe with Two coats of approved paint over one coat of primer and checked without any leakage complete. Complying with standard specifications (the urinal should be got approved by the executive Engineer before use on work.

Providing, fabricating and fixing partition frame work consisting of 50mm x 50mm sal wood frame work at spacing not exceeding 600 mm c/c fixed to the bottom and ceiling, the partition shall be skinned on both sides using 12mm thick commercial plywood of approved brand termite and water resistance and top covered with 4mm thick approved quality veneer finished with mealmine polish, complete including cost and conveyance of all materials, labour for all items of work

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., ROLLING SHUTTERS (WITH ISI MONOGRAM), Manually Operated (up to 8 sqm. Area)

Fabricating, supplying and erecting M.S angular Truss of span upto 10m. The bottom and top member is provided with 50x 50 x6mm double equal angles, welded back to back and in between top and bottom line, in areas of mid section is provided with 50 x 50x 6mm equal single angle for vertical and inclined members and at supporting ends 40x40x5mm singe angle is provided. All the members are welded together with 6mm gusset plate. The entire truss is anchored in RCC column by using 4 Nos. of M.S anchor bolts at each support, with 10mm thick base plate and shoe plate. The work includes cutting, straightening, placing in position of M.S angle and welding wherever necessary, and applying one coat of red oxide primer coat to all the members including cost of all materials, labour charges, and hire charges of achineris for cutting, welding, grinding and erection equipments, with all lead and lift, transportation, etc. complete as per specification.

Roofing with pre coated Galvanised iron corrugated sheet of size 0.45mm thk including 15m lapping using 20mm x 6mm GI bolts and nets screws wooden letters 50mm 6mm iron wind ties white leads etc., of 0.45mm thickness.

Wiring with 2x 1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (for electronic regulator).

Supply and run of 2 of 1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.

Supply and run of 2 of 4 Sq.mm ( 56/0.3) PVC insulated SC unsheathed Cu. Conductor cable of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.

Supply and fixing of 4' 40 W Twin mirror optic suspension type fitting (philips / crompton / wipro) complete with louvers cover complete with copper choke and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with flu. tubes.

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300 Watts regulator with 300mm down rod existing clamp.

Weighing machine be of digital type with maximum load capacity of 100kg ,water resistant and should be battery operated with backup of minimum 6 hour and as specificed by departmentmal officers

SS table should be following specification SS304 Lab Table Size: L 2850mm x W 1000 x H 900 MOC: SS304, 1.5mm thickness Finish: Mat Finish. Folded all the sides Table Top: SS304,1.5mm thickness, fully molded. Legs: 06 No’s. SS304, 40x40 square pipe with height adjustable smooth bushes. Shelves: 01 No bottom shelf.

SS304 Sink Table of following specifications Size: L 2000mm x W 450 x H 900 MOC: SS304, 1.5mm thickness Finish: Mat Finish. Folded all the sides Table Top: SS304, 1.5mm thickness, fully molded. Back splash: H 200mm Legs: 04 No’s. SS304, 40x40 square pipe with height adjustable smooth bushes. Sink: SS304 Size L 400 x W400 x H250 with drain Bottom support: SS304, 25x25 square pipe Water tap: SS304 Single way water tap-04No’s

190BAR HIGH PRESSURE WASHER with following specification Supply voltage (Ph/V/Hz)-1/220-240/50 , flow rate (l/h) -450-600 ,Inlet temperature 60deg celcius working pressure 70-150/7-15 bar/mpa , Max pressure -190bar , connection load -3.4kW ,dimension (LxWxH) (mm)-709 x469 x 1000

Fibre reinforced grating of 25mm deep grating used with cross rod horizontally of high strength ,corrosion resistant ,long life and safety in most difficult environment including transport and placing thr grating in site

HEAVY DUTY MS BODY ICE CRUSHER MACHINE (STONE FORM) with following specification HEAVY DUTY MOTOR – 5HP “A” GRADE  MOTOR – 3 PHASE  MS SHEET THICKNESS – 5MM  OUTPUT STONE FORM – 20MM TO 50MM  CAPACITY – 800 TO 1200 PER HOUR  POWER CONSUMPTION – 3.7 UNITS PER HOUR  MOTOR BRAND – SUGUNA “ A” GRADE HEAVY DUTY  POWER – 3/4 VOLTS PER HP  WARRENTY – 1 YEAR.

DG set 45KVA of capacity should be of deisel operated having sound insulation inbuilt with minimum vibrations and as specified by departmental officers

Providing expansion joint in RCC floor slab for 12.5mm width using polysulphide as sealent on the top and bottom for a depth of 7.5mm each and packing the inner space using compressible non-absorbent filler materials including cost of labour for cutting and fixing filler materials and laying polysulphide sealent with necessary spatula etc., complete complying with standard specifications and as directed

Providing expansion joint 12.5mm width in RCC roof slabs between RCC twin beams using PVC water bar of 150mm wide centre bulb of 4mm to 6mm thickness of approved quality and brand and including filling the inner space with suitable non-absorbent flexible and well compressible filler materials of approved quality and covering the top surface with GI sheet 30cm wide and 1.6mm thick using phill plugs, GI screws, limpet cup washers, bitumen washers, etc., complete complying with standard specifications and as directed

Providing expansion joint of 12.5mm wide in between RCC twin columns from top of pedastal to full height including filling the inner space with suitable non-absorbent, flexible and well compressible filler materials of approved quality and brand; finishing the sides of RCC columns with polysulphide sealents for a depth of 7.5mm on either side covering the inner space filled with filler materials as above etc., complete complying with standard specifications and as directed.

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Finishing the Flooring with cuddappa slabs 20/30mm thick and set in cm 1:3 and pointing the joints with the same morter etc.,Complete

Supplying and fixing of rainwater downfall pipe of 4" dia of heavy duty (PVC) with necessary shoe, bend, clamp etc., including labour for fixing etc., complete

Supplying and fixing of C.W. door frame including cost of materials, conveyance and labour charges for fixing etc complete

Providing and fixing factory made splendoor of solid core single leaf rigid composite polymer laminated sal wood, door shutter of required thickness, manufactured out of solid core door conforming to IS 2202 (Part-1) 1991, laminated with 0.8 mm thick polymer, termite, water resistant and fire retardant with superior gluing based on vacuum lamination technology and with various pre moulded design on both faces conforming to IS 6307-1985, using adhesive conforming to IS 4835-1979 and door shuters tested in conformation to IS 4020-1994. The finish of shutters will be TEADK/OAK/CEDAR/ROSE WOOD/WALNUT, plain colurs WHITE/IVORY/BEIGE/LIGHT GREY. Excluding cost of fixtures and inclusive of supply of shutters to respective work spot.

Providing and fixind of factory made 30mm P.V.C rigid foam (FOREX) PANEL DOORS Rajashree made from MS tube of 19 guage, size of 19mm x 19mm and covered with heat moulded PVC C Channel of 5 mm thick and width of 50mm to form styles and rails. The inner panel should be inserted in between the frame with 5mm thick PVC rigid foam sheet, welded/sealed to the styles and rails along with 5mm PVC, beeding on all and either sides. The vertical tubes may be filled with suitable wood material to further enhance the screw holding capacity

Providing manhole cover of size 0.60 x 0.60M in RCC 1:1.5:3 with suitable reinforcement and 50x50x6mm MS angle fixed along edges and as directed by Departmental officers.

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 300 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5

Supplying and fixing in position of Bitumen tar pad of 12mm thickness of ISI approved quality for expansion joint etc complete complying with standard specifications

Dredging in front of quay and in the entire harbour basin, entrance channel/inlet from creek to sea from existing levels to specified levels and slopes in the area marked in the drawing in all types of soils, pebbles, soft rock etc. dredgable by suction cutter/ grab/ backhoe or any other suitable method, carrying/ transporting in hopper barges/pipelines and disposing by depositing either in the marked reclamation area and/ or in the dumping area located at an average distance of 1km to2 Kms as per the directions and to the complete satisfaction of EIC including all charges of mobilisation, demobilisation of machineries/equipments,men, materials etc. complete with all lead and lift including taking soundings and ploting and producing department both in hard and soft copys and if any archelogical substance / materials found during dredging should be handed over department.

Design, Engineering, Procurement, supply, Erection & Commissioning & Testing of a 120 KLD ETP Including all Mechanical Works with 1 no bar Screen, 20 Nos Hydro Dynamic Diffuser, 50 Nos Coarse Bubble Diffuse, 2 nos. Effluent transfer Pump 30 m3/hr 3 Hp 10 m head,3 nos.Air Blower-Prist Air/Roots/Airvac-600 m3/hr 20 HP Motor, 2 No’s Air Blower 150 m3/hr @ 5 mwc 7.5 10HP motor, 1 no. Hypo Dosing Pump, 2 nos. Filter Feed Pump-12 m3/hr-35 m head, 3 HP Monoblock, 2 No’s Decant pump 200 m3/hr 20 m head, 2 No’s Sludge Pump 8 m3/hr 10 m head, 1 No Pressure Sand Filter-12000 LPH, 1 N Activated Carbon Filter-12000 LPH, 2 No’s Sludge Transfer Pump 8 m3/hr 10 m head, 1 No Screw Press with feed pump and dosing system, 1 No Electromagnetic Flow Meter 1.5”. All interconnecting pipes and fittings & All Electrical works including control panels, cables, meters and switches.

Plain cement concrete 1:2:4 (One cement, two sand, four aggregate) using 20 mm HBG metal including cost and conveyance charges and curing etc.

Supplying, laying and jointing PVC Pipes (having work pressure of 10 kg/sqcm) of approved quality and best variety conforming to BIS of the 50mm size dia including cutting threading and fixing of PVC specials using PVC adhesive (but excluding cost of such specials) and etc., complete complying with standard specification. (The PVC pipes shall be got approved by the Executive Engineer before use on works).

Supplying and fixing in position by pasting new PVC specials like Finolex or equivalent such as plain bend, door bend, plain tee, door tee off sets, 'Y' junction plain or with door of various sizes of best approved quality conforming to ISS.and providing leak proof joints including fixing to walls and giving connection to the PVC soil stacks,dismantling the brick masonry/RCC.floor or roof slab and redoing the disturbed portion to original condition etc., complete complying with standard specification as directed by the Departmental Officers.

PVC TEE 50mm dia

PVC Bend 50mm dia

Supply and fixing of 65 mm (21/2") GI pipe (Class 'B')of 6 mt. Length with 300mm x 300mm x 6mm MS base plate,duly welded at the bottom with concreting with construction of Masonary pedestal with suitable MS box to house 5Acontrol switch 16 A fuse unit (500V) etc. with suitable angle iron frame work, with door and with lock and keyarrangements and supply and fixing 1 metre of 32mm dia GI pipe (Class 'B') complete, with necessary clamps, on the above post with PVC unsheathed leads with painting of suitable colour.

Supply and laying of 2 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and fixing of brass cable gland for 2 x 16 sq.mm PVC armoured LTUG cable with earth connection .

Supply and fixing of LED light fitting (Philips / Bajaj / K.Lite / Crornpton Greaves ) suitable for incandescent lamp with guard and 100 W bulb.

Supply and fixing of 16 A TPN Metal clad switch on suitable angle Iron work with cable entry boxes for incoming and outgoingwith PWD Earthing .

15kwp/3p/415 On grid Solar Power Plant 1.540 Wp Mono Perc Half cut 144 cell Axitec German brand make 530/545/550wp solar panels imported 144 cell min perc half cut cell- HSN/SAC8541401-2 2.ACDB & DCDB ACDB WITH SPD (2 MPPT ) DCDB WITH SPD (2 MPPT)Suitable for 15Kwp SurgeProtection HSN/SAC8537100-0 3.Solar accessories 4 sq Dc cable -50mtr 4 sq AC cable 5 core cable -100 mtr Electrical Materials ( pipeline / wiring / accessories) Earthing 1.7mtr with chemical -2N ( DC & AC) Lighting Arrester -1N ( 1 mtr ) with protection Distribution box with enclosure HSN/SAC8541401-1 4.15kwp On Grid Solar Inverter 3 ph/415v HSN/SAC858541 5.Aluminium Rail with ballast enclosure Aluminium Rail 2*2 with complete enclosure for with civil concrete block 1-1 withnito bond solution HSN/SAC859544 6.Installtion Solar Power Plant Installtion includes Manpower,All accessories,Installtion HSN/SAC8541911-0

500 LPH AUTOMATIC RO PLANT SPECIFICATION 1) RAW WATER PUMP (LUBI – 1 HP) - 1No. 2) HIGH PRESSURE PUMP (FTT 316 PUMP [ 2-18] MSPV TR) - 1No. 3) SKID SS (30 mm STAINLESS STEEL) - 1No. 4) DOSING PUMP (E – DOSE 12 PLH) - 1No. 5) MEMBRANE HOUSINGS (4040 – STAINLESS STEEL 304) - 2Nos. 6) VESSELS (Pentair– Model 1248) - 2Nos. 7) CARTRIGE (Slim Wound Cartridge NZO) - 2Nos. 8) CARTRIDGE HOUSING (Slim Housing Gopani make) - 2Nos. 9) PANEL BOX (Fully Automatic Control Panel) - 1No. 10) QUARTZ SAND (1st Grade 120 kgs) - 1 lot 11) ACTIVATED CARBON (1st Grade 900 IV – 50 Kgs KALPAKA - 1 lot 12) ANTISCALENT (Genesys LF 60) - 5 Ltrs 13) MEMBRANES (Filmtec LCHR & TORAY 810) - 2 Nos. 14) MULTI PORT VALVES (1st Quality 40 NB TMF AUTO) - 2Nos. 15) FLOW METERS (Droplet, USA – 1200 LPH) - 2Nos. 16) PRESSURE GAUGES (1st Qlty SS – Glycerine Filled) - 2Nos. 17) LOW PRESSURE SWITCH (1st Grade – DANFOS with Reley) - 1No. 18) HIGH PRESSURE SWITCH (1st Grade – DANFOS with Reley) - 1No. 19) INTERCONNECTION (CPVC Fitting & Interconnection) - 1No. 20) ELECTRONIC FLOAT SENSOR (Branded 1st grade) - 1No.

1.Matrix-MIBR50FL36CWS-32 nos 5 MP IR BULLET CAMERA, 1/2.8" SONY - CMOS 5MP,Active Pixel Progressive Scan,Back Illuminated Image sensor Focal Length: 3.6mm,IR Range: Up to 30m,H.265,HIGHER FIELD OF VIEW,SMART STREAMING,ADAPTIVE STREAMING TRUE WDR,NAS. 2.Matrix NVR0801X-04 Channel NVR with 1 SATA Port,H.265 Compression Technique,4K Decoding Technique,12MP Recording Capability Storage: 1 SATA Port(10TB),Throughput: 512Mbps,Cascading,Adaptive Recording.Camera-Wise Recording Retention. 3.D-Link i)8-Port PoE Switch and Uplink Ports-4nos ii)8-Port Gigabyte Desktop Switch-4nos iii)RJ-45 Ethernet Network Jack-200nos iv)CAT 6 Network Ethernet OutdoorCable-2000m 4.Seagate/Toshiba/WD 8 TB AV Enterprise Hard Disk(Backup: 20 Days Approx.)-4Nos 5.Accessories i)Camera PVC IP67 Outdoor Box-32Nos ii)HDMI Cable – 5 mtrs. 6.Industrial Grade i)4U NVR Wall Mount Rack-4Nos ii)6U NVR Wall Mount Rack, 500 mmDepth-4nos 7.Samsung 43" Crystal UHD 4K Pro TV,Powerful Crystal UHD Picture Quality,Every Detail Counts,Slim and Modern,A TV You Can Count On,Plug and Play the Content You Want,Create Eye-Catching Content,Talk to Your Customers,Show Off Your Own Content Including Cable Laying Charges and Technical Servicesi)Camera Installation Charges,ii)NVR IP Configuration & Network Setup ChargesIncluding Accommodation and Transport charges

Sub Total Amount for above all items (excluding GST)

GST 18% for above SubTotal Amount

EMJAY CONSTRUCTIONS