REPAIR / MAINT AND CLEANING OF WATER SUPPLY INSTALLATIONS AND DISTRIBUTION AT ABOHAR MIL STN.

Amount

Cleaning of Clear/Raw water underground (Sump)/OHT/Sludge tank/Back wash tank/jack well/Clarifloculator UG Sump manually by traind and skilled manpower of working in under ground sump reservior with suitable T&P and safty equipments, Tools and safty measures. Draining out the contaminated muddy water from the bottem surface of sump and cleaning the side walls with the help of wire brush including removal green fungs leaves and other dust and dirt ,scraping of dissolved impurities, removal of surface mud /silt ,cleaning with water and draining out complete unwanted meterial obtained from cleaning as well as apply spray of suitable approved disinfactant chemical safe for human being on inner surface of the sump and apply two coat samocem on outer and inner wall and writing the date of cleaning with synthetic enamal paint complete all as specified by Engineer-in-charge. Note :- Sluge/Mud optained from bottom have to removed and deposited at specifed location directed by Engr-in-Chagre.

All as per item no. 1.00 but for Clear water UG Sump of Cap 2X50000 GLN.

All as per item no. 1.00 but for Clear water UG Sump of Cap 100000 GLN.

All as per item no. 1.00 but for Clear water UG Sump of Cap 20000 GLN.

All as per item no. 1.00 but for Over head reservior of Cap 1.5 LGLN.

All as per item no. 1.00 but for Over head reservior of Cap 1.0 LGLN.

All as per item no. 1.00 but for Over head reservior of Cap 0.5 LGLN.

All as per item no. 1.00 but for Clear/Raw water jack well 20000 GLN.

All as per item no. 1.00 but for Sludge tank 10000 GLN.

All as per item no. 1.00 but for clarifloculator Semi UG sump of diameter; 14.5 meter and depth exceedings exceeding 7.5 meter.

All as per item no. 1.00 but for Over head back wash tank 10000 GLN.

All as per item no. 1.00 but for Alum Dosing System/Area and Filter outlet valve chamber area.

Supply and fix in replacement of sluice valve iron spindle flanged type of class PN 1.6 complete of size 250 mm dia complete with iron wheel, nuts, bolts and washer incl rubber/fiber flanged joints etc. complete all as specified.

Supply and fix in replacement of sluice valve iron spindle flanged type of class PN 1.6 complete of size 200 mm dia complete with iron wheel, nuts, bolts and washer incl rubber/fiber flanged joints etc. complete all as specified.

Supply and fix inreplacement of sluice valve iron spindle flanged type of class PN 1.6 complete of size 150 mm dia complete with iron wheel, nuts, bolts and washer incl rubber/fiber flanged joints etc. complete all as specified.

Supply and fix inreplacement of sluice valve iron spindle flanged type of class PN 1.6 complete of size 100 mm dia complete with iron wheel, nuts, bolts and washer incl rubber/fiber flanged joints etc. complete all as specified.

Supply and fix in replacement of CI non return valve(NRV) of size 100 mm incl nuts and volts, testing etc complete Make : Kirloskar/BIR/Venus/Zoloto.

Supply and fix in replacement of CI non return valve(NRV) of size 150 mm incl nuts and volts, testing etc complete. Make : Kirloskar/BIR/Venus/Zoloto

Supply and fixing FM series chemical dosing pump are driven by 1/4 HP motor , 1440 rpm, 3 phase , Frequency 50 HZ, flow rate 150 LPH Aluminium body . Complete all as specified and directed by Engr-in charge.

M&L cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate for foundations,fillings and mass concrete all as specified and as directed by Engr in charge.

M&L cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate for foundations,fillings and mass concrete all as specified and as directed by Engr in charge.

M&L disconnecting/dismantling and strip opening of worn out/ defective electric motor of any make and Capacity of 15 HP, 3 phase 415 volts AC supply, taking out burnt stator winding, servicing cleaning of stator slots, bearing, bushes etc rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, Varnishing, china glass paper,'F' class paper,Thick sheet paper ( packing sheet) and drying, and replacement of bearings, bushes, rusted nut bolts and washer,seal etc, re-assembling, testing installed and back to original location installation, testing & commissioning on load complete all as specified and directed with entire satisfaction of Engineer-in-Charge

All as per Srl Item No. 11 here in before , but of capacity 3 HP, 3 phase,440 volts. Complete all as specified and directedby engr-in-charge.

All as per Srl Item No. 11 here in before , but of capacity 5 HP, 3 phase,440 volts. Complete all as specified and directedby engr-in-charge.

All as per Srl Item No. 11 here in before , but of capacity 30 HP, 3 phase,440 volts. Complete all as specified and directedby engr-in-charge.

All as per Srl Item No.11 here in before , but of capacity 40 HP, 3 phase,440 volts. Completeall as specified and directedby engr-in-charge.

All as per Srl Item No. 11 here in before , but of capacity 60 HP, 3 phase,440 volts. Complete all as specified and directedby engr-in-charge.

All as per Srl Item No. 11 here in before , but of capacity 7.5 HP for Submersible, 3 phase,440 volts. Complete all as specified and directedby engr-in-charge.

All as per Srl Item No. 11 here in before , but of capacity 5 HP for Submersible 3 phase,440 volts. Complet all as specified and directedby engr-in-charge.

M & L disconnecting electric connections,dismantling,taking up centrifugal pumping set capacity 60 HP from existing foundation,transporation to workshop for repair and back to installation after repairing and welding,brazing,facing grinding, turning repairing/replacement of defective parts,re-assemblying andfixing to its original position as comprising following parts and testing pumping set complete all as specified.

SS Impeller

Brass bushs

Stainless steel shaft

Ball bearing as per existing size and make

Gland plate as per existing size

M & L disconnecting electric connections,dismantling,taking up centrifugal pumping set capacity 30/40 HP from existing foundation,transporation to workshop for repair, and back to installation after repairing and welding,brazing,facing grinding, turning repairing/replacement of defective parts,re-assemblying andfixing to its original position comprising following parts and testing pumping set complete all as specified.

SS Impeller

Brass bushs

Stainless steel shaft

Ball bearing as per existing size and make

Gland plate with shaft coupling as per existing size

M & L disconnecting electric connections,dismantling,taking up centrifugal pumping set capacity 15 HP from existing foundation,transporation to workshop for repair, and back to installation after repairing and welding,brazing,facing grinding, turning repairing/replacement of defective parts,re-assemblying andfixing to its original position comprising following partsand testing pumping set complete all as specified.

SS Impeller

Brass bushs

Stainless steel shaft

Ball bearing as per existing size and make

Gland plate with shaft coupling as per existing size

Supply ,fixing in replacement of Cast iron Foot Valve Flanged ends duly drilled ISI marked conforming to IS -4038 and suitable for 150 mm bore pipe.complete all as directed by Engr -n -Charge.

Supply ,fixing in replacement of Cast iron Foot Valve Flanged ends duly drilled ISI marked conforming to IS -4038 and suitable for 100 mm bore pipe.complete all as directed by Engr -n -Charge.

S & F in Replacement of nut bolts & washers of sluice valves, non return valve , gland plate, motors and pumps etc. .complete all as specified and directed by Engrin-charge.

Material and Labour charges for collection of Sample for Chemical examination of Raw water from raw water pond at clear water installation and send to authorized lab for testing and report will be submitted in triplicate to deptt including cost of testing complete all as specified and directed by Engr-in-charge. Note :- Collection of sample in Sterilized Glass Bottle up to the neck and sealed properly.

Material and Labour charges for collection of Sample for Chemical and Bacteriological examination of Clear water from UG Sump at clear water installation and send to authorized lab for testing and report will be submitted in triplicate to deptt including cost of testing complete all as specified and directed by Engr-in-charge. Note :- Collection of sample in Sterilized Glass Bottle up to the neck and sealed properly.

M & L for dismantling of sluice valve of any size for refacing, regrinding and replacement of check nut, rubber gasket, making the threads of spindle and after repair of sluice valve and re-fixing its original position complete all as specified and directed by Engr-in-charge.

M& L for repairs and servicing of flaculators assembly with gear reduction system, oil change, greasing of rotating parts and fixed arms and repair and replacement of central thust bearing , rear box bearing, slip ring assembly , fan belt, chain of gear reduction assembly of flaculator complete all as specified and directed by Engr-in-charge.

M & L for Run lead joint suitable for 250 mm spigot and socketed pipes and fittings complete all as specified and directed.

M & L for Run lead joint suitable for 200 mm spigot and socketed pipes and fittings complete all as specified and directed.

M & L for Run lead joint suitable for 150 mm spigot and socketed pipes and fittings complete all as specified and directed.

M & L for Run lead joint suitable for 100 mm spigot and socketed pipes and fittings complete all as specified and directed.

M & L MS work for febrication of iron pit cover , gate valve chamber cover,etc. as required MS angle iron of required size , MS sheet cover, cross arms, bracing, supports, clamps structual steel section including nuts,bolts, washers, welding, bending, cold or hot drilling holes for bolts in any shape or size and including of one coat of primer and one finishing coat of paint complete all as specified and directed by Engr-in-charge.

M & L for brick work for valve chamber with sub class 'B' bricks in one brick thick honey comb work built in cement mortar 1 : 6 complete all as specified and directed by Engr-in-charge.

S & F in repair 15 mm bore medium grade steel tubes galvanized with all fittings and laid in trenches all as specified and directed by Engr-in-charge.

S & F in repair 20 mm bore medium grade steel tubes galvanized with all fittings and laid in trenches all as specified and directed by Engr-in-charge.

S & F in repair25 mm bore medium grade steel tubes galvanized with all fittings and laid in trenches all as specified and directed by Engr-in-charge.

S & F in repair 40 mm bore medium grade steel tubes galvanized with all fittings and laid in trenches all as specified and directed by Engr-in-charge.

S & F in repair 50 mm bore medium grade steel tubes galvanized with all fittings and laid in trenches all as specified and directed by Engr-in-charge.

S & Fin repair 80 mm bore medium grade steel tubes galvanized with all fittings and laid in trenches all as specified and directed by Engr-in-charge.

S & F in replacement of gun metal, globe or gate valve with iron wheel head secrewed both ends for iron pipes 50 mm bore as in repairs complete all as specified and directed by Engr-in-charge.

S & F in replacement of gun metal, globe, Ball or gate valve with iron wheel head secrewed both ends for iron pipes 40 mm bore as in repairs complete all as specified and directed by Engr-in-charge.

S & F in replacement of gun metal, globe, ball or gate valve with iron wheel head secrewed both ends for iron pipes 25 mm bore as in repairs complete all as specified and directed by Engr-in-charge.

S & F in replacement of gun metal, globe, ball or gate valve with iron wheel head secrewed both ends for iron pipes 20 mm bore as in repairs complete all as specified and directed by Engr-in-charge.

S & F in replacement of gun metal, globe, ball or gate valve with iron wheel head secrewed both ends for iron pipes 15 mm bore as in repairs complete all as specified and directed by Engr-in-charge.

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundations or laying cables/pipes etc. and getting out in soft/loose soil all as specified and directed by Engr-in-charge.

Returning, filling in including spreading leveling, watering and well ramming in layers of Soft/loose soil not exceeding 25 cm thick complete all as specifiedand directed by Engr-in-charge.

Removal of excavated material to a distance not exc 50 mtr and depositing where directed at level not exc 1.5 mtr above the starting point complete all as specified and directed.by Engr-in-charge

M & L petty rapairs to water supply pipe line for removing leakage / blockage of CI/DI pipe 80 to150 mm bore by providing gasket /socket/tee/elbow/bend including washers, nuts,bolts etc. including earth work as required complete all as specified and directed by Engr-in-charge.

M & L petty rapairs to water supply pipe line for removing leakage / blockage of CI/DI pipe line 150mm to 300 mm bore by providing gasket /socket/tee/elbow/bend including washers, nuts,bolts etc. including earth work as required complete all as specified and directed by Engr-in-charge.

M & L petty rapairs to water supply pipe line for removing leakage / blockage of GI pipe line 15mm to 40 mm bore by providing gasket /socket/tee/elbow/bend including washers, nuts,bolts etc. including earth work as required complete all as specified and directed by Engr-in-charge.

M & L petty rapairs to water supply pipe line for removing leakage / blockage of GI pipe line 40mm to 80 mm bore by providing gasket /socket/tee/elbow/bend including washers, nuts,bolts etc. including earth work as required complete all as specified and directed by Engr-in-charge.

Supply and fixing D Joint with complete acessories of size 80 mm dia with nuts and volts complete all as specified and directed by Engr-in-charge.

Supply and fixing D Joint with complete acessories of size 100 mm dia with nuts and volts complete all as specified and directed by Engr-in-charge.

Supply and fixing D Joint with complete acessories of size 150 mm dia with nuts and volts complete all as specified and directed by Engr-in-charge.

Supply and fixing D Joint with complete acessories of size 200 mm dia with nuts and volts complete all as specified and directed by Engr-in-charge.

Supply and fixing D Joint with complete acessories of size 250 mm dia with nuts and volts complete all as specified and directed by Engr-in-charge.

Supply and fixing of gilan packing for pump and sluice valve of size 6 mm, 8mm,10mm complete all as specified and directed by Engr-in-charge.

Supply & Fixing digital Amp meter 5 Amp to 100 Amp with accessories as per requirement at site complete all as specified and directed by Engr-in-charge.

Supply & Fixing digital Volt meter 0 to 500 Volts with required accessories as per requirement at site complete all as specified and directed by Engr-in-charge.

S & F star delta startor for 15 HP motors 3 Phase 415 Volts complete all as specified and directed by Engr-in-charge

S & F star delta startor for 40 HP motors 3 Phase 415 Volts complete all as specified and directed by Engr-in-charge

S & F star delta startor for 60 HP motors 3 Phase 415 Volts complete all as specified and directed by Engr-in-charge

S & F DOL Starter 3 Phase 415 Volts complete all as specified and directed by Engr-in-charge

S & F submersible copper cable of size 6 Sqmm ISI mark complete all as specified & directed by Engr-in-charge.

S & F Rubber Gasket for Non return valve of capacity 150 mm dia complete all as specified & directed by Engr-in-charge.

S & F Rubber Gasket for Non return valve of capacity 100 mm dia complete all as specified & directed by Engr-in-charge.

Supply only Grease for motors and pumps complete all as specified and directed by Engr-in charge.

M&L for painting the surface of CI/GI pipe of size up to 300 mm with valve, as per requirement places complete with one coats of primer and two coat of enamel paint as per MES colour code including preparation of surface by scrubbing down old existing paint as directed complete all as specified and directed.

M&L for cleaning of raw water installation area, raw water pond area, clear water area, and pump 1, 2,3, surrounding of over head tank and other if any with the help of mannualy or grass cutting machine fuel included and other accessories. Cleaninig included cutting of normal grass heavy grass, trimming of trees, and if any all as directed by Engr-in-Charge.

Material and labour for servicing of Air Blower installed at Filteration plant with replacement of cooling oil, bearing set, oil seal set, relief valves, pressure gauge, Air filter, V-Belts etc. all as specified and directed.

Supply, fixing, testing and commissioning of submersible pump 03 HP, Model No. KS6C'-0303, delivery pipw size 50 mm, Head 30 meter, discharge 180 LPM, 3 pahse 415 voltage, protection IP 68, B Class Insulation etc. complete all as specified and directed by Engr-in-charge.Make- Kriloskar or Equivalent.

Supply, fixing, testing and commissioning of submersible pump 7.5 HP, Model No. KS6C'-0808, delivery pipw size 50 mm, Head 44 meter, discharge 360 LPM, 3 pahse 415 voltage, protection IP 68, B Class Insulation etc. complete all as specified and directed by Engr-in-charge.Make- Kriloskar or Equivalent.

Supply, fixing, testing and commissioning of Non-clog submersible pump 7.5 HP , Model No. ETERNA 5500 CW+, delivery pipe size 80 mm, Rated speed-2900 RPM , Head 12 meter, discharge 1272 LPM, 3 pahse 415 voltage, protection IP 68, B Class Insulation etc. complete all as specified and directed by Engr-in-charge.Make- Kriloskar or Equivalent.

Supply, fixing, testing and commissioning of vaccum operated cylinder mounted chlorinated plant of capacity 0-10 kg per hr including all connected Items such as Fixing Yoke with self centring system, Chlorine cylinder valve, Filter, Safety valve, Daipharm, Chlorine delivery Adjustment needle Valve, Chlorine outlet valve, Flow meter, Vent, Vaccum hose Pipe, Injector with rated valve all as specified and directed.

Supply, fixing, testing and commissioning of Floculator assembly with gear box and 02 HP Motor coonected with mixing rod and panel with all connected accessories all asapecified and directed.

M&L for painting the surface of each pump -motor set of any cap. as per requirement places complete with one coats of primer and two coat of enamel paint as per MES colour code including preparation of surface by scrubbing down old existing paint as directed complete all as specified and directed.

M & L for supply and laying of Cast iron pipes of size 100 mm with flanged ends, centrifugally cast, class A, in any length laid in trenches all as specifed and directed.

M & L for supply and laying of Cast iron pipes of size 150 mm with flanged ends, centrifugally cast, class A, in any length laid in trenches all as specifed and directed.

S&F Bends, Tapers, Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged all as specified and directed.

Supply & install, commissioning and testing of out-door type feeder pillar, LT type panel (CPRI approved) of size 1.2 mtr x 1.2 mtr x 0.6 mtr fabricated out of 3.15 mm thick CRCA sheet angle size 50 x 50 x 5 mm thick frame factory made totally enclosed dust and vermin proof are side hinged opening arrangement on front and back with weather proof canopy of top with locking arrangement, cable entry and exist from bottom both side. a) MCCB 100 A,415 Volts 4 pole, 16 KA-(Adj Thermal Mag sett) -01 Nos incoming b) Indicator lamp LED type (set of three Red,Yellow,Blue)-01 set c) MCCB 63 A,415 Volts 4 pole 16 KA-02 Nos outgoing d) MCCB 40 A,415 Volts 4 pole 16 KA,-01 Nos Standby e) Star delta Starter for 15 HP Motor-02 Nos f) Aluminum bus bar 150 Amp , Reqd length -04 nos g) Digital Volt meter & Ammeter with suitable CT's each-01 set

SHRI SHYAM CONSTRUCTION CO.

RANDHIR AND COMPANY