CERTAIN REPAIRS TO FLOORING, TILING, PLINTH PROTECTION, DRAIN, RAIN WATER PIPES, ROOFING, JOINERIES, PLUMBING INCLUDING AND ALLIED WORKS AT ZONE-A IN AREA OF AGE BR - I UNDER GE (EAST) LUCKNOW.

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor finished even and smooth using extra cement complete all as specified and directed.

M&L for glass dividing strips of 3mm thick & 38mm wide of strips complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C- 2 using 40mm graded stone aggregate as in plinth protection , PCC Path finished even and smooth without using extra cement complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework complete all as specified and directed.

M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed.

M & L brick work half brick with old size fly ash bricks straight or curved on plan in any radius built in CM 1: 4 complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 brick work or concrete surface and finishing the surface even and smooth complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work of walls, mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified. Note : - Supply only water proofing compound shall be measured and paid for separately.

Supply only integral water proofing compound, ISI Marked complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over & including a coat of white wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over & including a coat of white wall care putty (Make-Birla/JK/Asian), complete, all as specified & directed.

M & L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying two coat of oil emulsion distemper (OBD) of approved shade/tint all as specified & directed

M&L for preparation of old decorated plastered surfaces of walls and applying two coat of cement base paint of approved shade/tint complete all as specified and directed.

All as per description of serial item No. 16 above but two coat of cement base paint on ceiling surfaces.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but not exc. 4 sqm each complete all as specified and directed.

All as per item No 18 above but n.exc 1.5 sqm each ditto

Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm including iron mongery complete all as specified and directed.

S & F plain, solid, straight chowkats and frames of second class hardwood (SAL), wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints, complete all as specified & directed.

S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

Supply and fixing factory made 35 mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour single piece extruded PVC profile reinforced with MS square tube in opening as per specifications complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S & F brass sliding door bolt 300mm long with sand or die-cast brass hasp and staple (bolt type) and fixing bolts and sliding bolt with rolled or drawn brass bolt, complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S&F 150 mm long brass barrel tower bolts with barrel of extruded section complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S&F 100mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S&F butt hinges 100 mm mild steel hinges medium weight complete all as specified and directed.

M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 depth of cutting exc half brick but n. exc one brick complete all as specified and directed.

S&F mild steel holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Grade E-165 (Fe 290) including necessary welding etc complete all as specified and directed.

S&F 300 mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and directed.

Dismantling of timber boarding any description fixed in any position fixed with nails etc complete all as specified and directed.

S&F in repair 18/19 mm thick pre laminated partical boad exterior grade laminated on both side with decorative choice lamination as in cupboard door shutter complete all as specified and directed.

M&L block boards 18/19mm thick, grade 2 quality, interior grade, decorative type with decorative face veneer on both face, fixed with screws to timber rame work complete all as specified and directed.

S&F 0.90mm thick decorative laminates 'Mica type 1 of surface finished,colour and pattern as approved, fixed with adhesive complete all as specified and directed.

M&L 2nd class hard wood, wooden beading, plain fillets, square or rectangular or tringular in section clean sawn sectional area exc 3 sqcm but n exc 6 Sqcm fixed with nail complete all as specified and directed.

S&F continuous piano hinges, mild steel bright finished or electro galvanized with width of flap 30mm when open complete all as specified and directed.

S&F 100mm size extruded brass handle, fabricated type polished, ISI marked complete all as specified and directed.

S&F magnet catcher for cup board shutter all as specified, ISI Marked complete all as specified and directed.

M&L for treating end of post or back of chowkhats etc wit tar or coal tal black paint area of tarred exc 0.1 sqm but n.exc 0.5 sqm complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality & glazing with oil putty or wooden beads in square area n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.35 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F drapery rods, coloured, standrad quality, PVC coated not less than 25mm dia with heads at both ends and middle support, rings etc. all as specified and direced.

S&F in repairs aluminium(extruded section body) door closer hydraulically regulated designation No. 3, universal type suitsble for door shutter of 851 to 1000mm in width and of weight between 61to 80 Kg complete all as specified and directed.

M&L for preparation of previously treated surfaces of steel or iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering /cladding to wall , fixed with self tapping screws incluidng dismantling of existing sheet complete all as specified and directed.

S & F joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc., (cut to ordinary lengths ie within 20mm of the length indicated) of Fe 410 - W (Gde - E - 250) quality - A complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and directed.

M&L for Non skid coloured ceramic tiles7to 8 mm thick(square/Rectanglar) area of each tiles exc 0.06 Sqm but not exc 0.11 Sqm in floor including screed bed 15mm thick or beding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic tiles (coloured) 300x600 x7 mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:3 complete all as specified and as directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (dark shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (dark shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:3 complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with all fittings and fixed complete to walls and ceilings or laid in floors, including taking up or down of exixting tubing complete all as specified & directed.

M&L for galvanized steel water tubing medium grade of 20mm bore with all fittings and fixed complete to walls and ceilings or laid in floors, including taking up or down of exixting tubing complete all as specified & directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing n exc 10cm girth complete, all as specified.

Cleaning and removing all scale and dirt etc from tank and mouth of circulating pipe and refixing of capacity exc 250 but n exc 500 litres, complete all as specified and directed.

Cleaning and removing all scale and dirt etc, from tank and mouth of circulating pipe and refixing of capacity exc 500 but n exc 1000 litres, complete all as specified and directed.

Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe including dismantling of exixting PVC water tank complete all as specified & directed.

Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe including dismantling of exixting PVC water tank complete all as specified & directed.

S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and as directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 15mm bore complete all as specified and directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified and directed.

S&F in repair plastic water closet seat cover black/white, closed pattern with flat bottom & cover and aluminium anodised hinging device, complete all as specified and directed.

S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size630x450mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified & directed.

S&F PVC low level flushing cistern of 10 ltr capacity fixed in repair including siphon float valve and rubber cone etc complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white, flat back of size 600x480mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed.

S&F in repair chromoium plated box type toilet paper holder fancy complete all as specified and directed.

S&F in repair soap dish, fancy type, complete all as specified and directed.

S&F glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long complete all as specified and directed.

S&F 15 mm bore bib tap, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F in repair pillar cock fancy type 15mm dia cast copper alloy with capstan heads, chromium plated screwed down high pressure , with or with out lettered 'Hot' & 'Cold' with long shank and fly nut screwed for iron pipe, complete all as specified and directed.

S&F CP brass towel rails 20mm dia and 600mm long fixed as in repair incl chromium plated brass screw and wooden/cleats complete all as specified and directed.

S&F CP angle valve for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type as in repair complete all as specified and directed.

S&F CP stop valve for 15 mm bore pipe, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F PVC connection of 15mm bore,600mm long with brass coupling on both ends of superior quality complete all as specified and directed.

S&F PVC bath cabinet with 4mm thick looking mirror of overall size 560x410mm complete all as specified and directed.

S&F shower health faucet to EWC ,CP brass with minimum 900mm long CP flexible pipe, connection etc complete all as specified and directed.

S&F peg set of 6 brass fancy type complete all as specified and directed.

M & L 20mm thick granite stone slab (any shade)(table round and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 0.8mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460 mm with bowl size 410mm x 330mm x160 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete all as specified and directed.

S&F in repairs sink made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 495mm x 420mm bowl size 410mm x 330mm x 160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete all as specified and directed.

S&F in repairs 32mm dia PVC waste pipe approx 900mm long for sink/WHB complete all as specified and directed.

S & F in repairs stainless steel Kitchen plate rack of overall minimum size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed.

S&F in repair chromium plated brass single hole basin mixer with hot and cold arrangement with long shank and cup suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair chromium plated brass wall mixer with hot and cold arrangement with long shank and cup suitable for 15mm bore pipe all as specified and as approved.

S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed.

S&F in repair Glass corner shelves, fancy type, 6mm thick 250x250mm size and fixed over CP brass bracket, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints, laid in trenches or in floor, complete, including dismantling of existing pipe complete all as specified and directed.

S&F PVC (SWR) bends, any radius of 110 mm bore, complete all as specified and directed.

M&L for repair to steel windows by welding of hinges, window stay, handles etc., including easing and adjusting of window shutter complete all as specified and directed.

Ajay Traders

shiva enterprises

M/s Durga Construction Company

M/S Reliance Construction

R K CONTRACTOR AND SUPPLIERS

NEW BHARAT ENGINEERING AND CONSTRUCTION CO