Comprehensive repair to centre amenities west of solapur highway at MIRC under GE South Ahmednagar.

Amount

Dismantling of stone slab, kota stone, cudappah stone, granite etc any description in floor, laid, bedded & pointed in any mortar, all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor & paving n.exc. 15cm thick below or above ground level all as specified and as directed.

Demolition of brick/ stone masonry built in cement or lime mortar including all quoins, arches, pillars,etc all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

Taking down shutters of any description, area exceeding 1 sq. m but not exceeding 2 sq. m each all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.5 sq. m each all as specified and as directed.

Taking down old steel window / ventilator of any size & type complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area exceeding 1.5 sq. m but not exceeding 4 sqm each all as specified and as directed.

Dismantling of PGI /translucent sheets of any guage or any thickness/size all as specified and as directed.

Dismantling asbestos cement (corrugated, Semi-corrugated etc.) sheets in roof coverings all as specified and as directed. .

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re- fixing all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re- fixing all as specified and as directed.

Taking up or down 25 mm bore steel tubing and connections, including cleaning for re- fixing all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for moorum filling in floors or paving, laid in layers n.exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for hard core of gauge exc. 63 mm but n. exc. 100 mm, deposited spread and levelled in layers n. exc. 15cm thick, including watering and rammed etc. complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation, filling and mass concrete etc. complete all as specified and as directed.

M&L for RCC 1:2:4, type B-1, using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6, complete all as specified and as directed.

M&L for cutting chases for pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth concealed water tubing all as specified and as directed..

M&L for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

All as per item No. 22 here-in-before but except stone.

S&F 35 mm thick, second class hard wood glazed and skeleton shutters, factory made, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed.

S&F 35 mm thick, second class hard wood, plain framed, factory made, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and as directed.

S&F of solid PVC door frame of size 50mm x 47mm made out of 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face all as specified and as directed.

S&F factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face , supplying & fixing in frame at site as per specification & drawing all as specified and as directed.

S&F 150 mm size aluminium anodised, barrel tower bolts of ex- truded section and fixed all as specified and as directed. .

S&F 100 mm size butt hinges medium weight, cold rolled mild steel, and fixed all as specified and as directed.

S&F in repairs, 300mm size,MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

S&F 125 mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed.

S&F in repairs, aluminium powder coated, decorative type curtain rod, 20mm dia, complete all as specified and as directed.

S&F in repairs, aluminium powder coated decorative brackets, suitable for 20 mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling , rawl plug, screws etc complete all as specified and as directed.

S&F in repairs, tubular towel rail, brass chromium plated, 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm, all as specified and as directed.

S&F in repairs, galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aparture 1.18 mm, fixed with wooden beads / tinned tacks or galvanised wire staples to steel / wooden frame complete all as specified and as directed.

M&L for mild steel TMT bars 6 to 8 mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410 -W (Gde- E- 250) quality- A all as specified and as directed.

S&F mild steel windows, side hung, including projecting type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and as directed.

S&F mild steel windows, side hung, including projecting type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and as directed.

S&F mild steel ventilators top hung type with glazing bars all as specified and as directed.

S&F pressed steel doors frames of size 105 mm x 60 mm x 1.25mm thick, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and as directed.

S&F powder coated aluminium door with frame and shutter in two panels (top and bottom) made out of aluminium sections (make Jindal or equivalent) including 5 mm thick sheet glass, aluminium cleats, rubber/ neoprene beading, all necessary fittings and locking arrangements etcall as specified and as directed and comprises of following sections :- (a) Vertical style- 47 x 44.5 x 2.25 mm thick @ 1.15 Kg/m (Min) (b) Lock rail- 114.6 x 44.45 x 2.3mm thick @ 2.06 Kg/m (Min) (c) Bottom rail-114.6 x 44.45 x 2.3mm thick @ 2.06 Kg/m (Min) (d) Frame-47.5 x 44.45 x 2.25 mm thick @ 1.12 Kg/m (Min)

S&F powder coated aluminum windows, three track, made out of aluminium sections (make Jindal or equivalent) including all necessary fittings, 5mm thick sheet glass, rubber/ neoprene beading, locking arrangements all as specified and as directed and comprises of following sections :- (a) Window frame (i) Bottom-Section 20671 (Wt not less than 0.699 Kg/m) (ii) Top & Size - 20672 (Wt not less than 0.594 Kg/m) (b) Shutter (i) Vertical (end)- 20669 (Wt not less than 0.481 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m)

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved by GE, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by GE, having tensile strength of 550 Mpa as in roof covering/ridges/valley gutters/cladding to wall, fixed with self tapping screws as specified, coloure and design as approved by GE

M&L 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, wall cladding, fixed with 'L' type or 'J' type or cranked hook bolts, washer etc complete all as specified and as directed.

Fixing only 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, wall cladding, fixed with 'L' type or 'J' type or cranked hook bolts, washer etc complete all as specified and as directed.

M&L in repairs, for gypsum board 12 mm thick for insulation and accoustic purposes, 60 cm x 60 cm in size, fixed with staples on and including snap grid Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with and including Gl hangers made out of 6 mm dia GI wire (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3 mm size 60 mm long and expension hold fasteners 12.5 mm dia. 40 mm long with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.including necessary fixing/ repair /replacement of existing electrical fittings at site complete all as specified and as directed.

M&L for special treatment to sunken portion with 10 mm thick rendering in cement mortar 1:4 with WPC liquid complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plaster surface. Rendering again 10 mm thick in cement mortar 1:4 mixed with complast 421 in sunken portion of WC and CI pipe joints shall be filled / jointed with mixture of cement, fine sand and Nittoproof 130 and provide hole in the wall and fix 600 mm long 20 mm dia GI spouts light grade, PCC 1:3:6, type C1 (using 20 mm graded stone aggregates) filling, floor area of WC/bath upto 1.5 Sqm etc. complete all as specified and directed. Note :- The rates include for drilling of the hole RCC @ 1.00 m centre to centre, to a depth to a length of 30 mm and fixing of PVC pipes of dia 15/20 mm laid dry and grouting with cement slurry mixed with can bax 100 chemical with pressure grouting with minimm 3 Kg/Sqm complete all as specified and directed

All as per item No 50 but floor area of WC/bath exc 1.5 Sqm but not exc 3.0 Sqm

M&L in repairs, for water proofing treatment to RCC roof slab, including parapet, comprising with the following treatment/specification from bottom to top:- (i) Taking out old roof treatment and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish n exceeding 100 mtr distance from starting point. (ii) Screed bed or bedding layer of 10 mm thick cement mortar 1:4 with mixing of WPC @ 3% by weight of cement or as per manufacturers instructions and surface finished even and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm for laying APP membrane. (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.30 ltr /Sqm conforming to IS:3384-1986. (iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (v) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm. Note: Water proofing compount will be measured & paid seperatly.

Supply only water proofing compound complete, ISI mark all as specified and as directed.

S&F in repairs, 18/19 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work/ with aluminum angle cleat all as specified and as directed.

M&L for machine cut kota stone flooring, 20-25 mm thick (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer of cement mortar 1:6 jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed.

All as per serial item No. 55 here-in-before but 18 to 20 mm thick kota stone on vertical surfaces such as in skiting /dado of size as required at site over and including10 mm thick backing coat of cement mortar (1:4) complete all as specified and as directed.

M&L 20 to 25mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in table top, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, including full round moulding the edge, laid over and including screed bed 15mm thick in cement mortar 1:4, jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish complete all as specified and as directed.

M&L for machine cut cudappah stone slab 20-25mm thick laid over and including cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for 75mm thick, plain cement concrete, 1:4:8, type D-2, using 40 mm graded stone aggregate as in sub base of floor all as specified and as directed.

M&L for glazed coloured ceramic tiles 7mm thick (plain or printed), area of each tile exc 0.11 sqm but n exc 0.18 sqm, shade as approved by GE, as on vertical surfaces like dado, skirting etc laid over and including 10 mm thick backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm, shade as approved by GE, as in floors etc., laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.

M&L for vitrified coloured ceramic tiles ,10 mm thick (square / rectangular), area of each tile n exc 0.36 sqm, shade as approved by GE in floor etc laid over and including 20 mm thick bedding layer in cement mortar 1:6, jointed in grey cement slurry and pointed in white or coloured cement to match with colour of tiles all as specified and as directed.

All as per serial item No 63 above but in dado / skirting or on vertical surfaces, laid over and including 10 mm thick backing coat in cement mortar 1:4 .

M&L in repairs for 60mm thick, factory made, chamfered edge, cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, lawns, drive ways or light traffic, parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; etc complete all as specified and as directed.

M&L in repairs for digitally printed machine pressed, factory made paver tiles, 300mm x 300mm x 10 mm thick, as approved by GE as in floors, laid over and including screed bed 15mm thick in cement mortar 1:4, set, jointed and pointed in neat cement slurry all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar 1:4 on fair faces of brick masonary surfaces or concrete surfaces, finished even and fair without using extra cement complete all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick masonry surfaces or concrete surface, finished even and smooth with sagol complete all as specified and as directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on fair faces of brick or concrete surface, finished even and smooth with sagol as in ceilings, complete all as specified and as directed.

M&L for raised pointing in cement mortar 1:3 to random or polygonal rubble, uncoursed or brought upto courses masonry, complete all as specified and directed.

M & L for preparation of newly plastered or unplastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and as directed.

M & L for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M & L for complete removal of existing treatment, preparation of surfaces of walls and applying one coat of alkali resistant primer over a coat of 1 mm thick (average) white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all specified and as directed

M&L for preparation of old decorated plastered surfaces of wall including filling the holes and cracks with white cement and applying one coat of oil bound distemper complete all as specified and as directed.

M&L for preparation of new plastered surfaces or previously untreated surface of wall and applying two coats of cement base paint over one coat of primer all as specified and as directed.

M&L for preparation of old decorated plastered surface of walls and applying one coat of cement base paint complete all as specified and as directed

M&L for complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. colour and shade as approved by GE

M&L for complete removal of existing treatment and distempering with two or more coats, 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. colour and finishes as approved by GE

M&L for complete removal of existing treatment and finishing walls with textured exterior paint of required shade : (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. colour and finishes as approved by GE

S&F 3 mm thick frosted/figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows including glazing pins etc. complete all as specified and as directed.

S&F 3 mm thick plain sheet glass and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows including glazing pins etc. complete all as specified and as directed.

M&L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over one coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood or wood based materials of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paints complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for 15 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

Fixing only old serviceable GI tubing 15 mm bore, with and including new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

M&L for 20 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

Fixing only old serviceable GI tubing 20 mm bore, with and including new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

M&L for 25 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

Fixing only old serviceable GI tubing 25 mm bore, with and including new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F in repairs, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 500 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting all as specified and as directed.

All as per item No. 93 above but 1000 ltr capacity

All as per item No. 93 above but 2000 ltr capacity

All as per item No. 93 above but 5000 ltr capacity

S&F in repairs, bib tap, 15mm dia cast copper alloy chromium plated, with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs, 15 mm bore pillar taps, cast copper alloy with capstan heads, fancy type, chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs, stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F in repairs, 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed.

S&F in repairs, 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and as directed.

M&L for grating doom 100mm dia PTMT all as specified and as directed.

S&F in repairs, 32/ 40 mm bore PVC flexible outlet pipes for wash basin/ sink/ urinal fixed complete all as specified and as directed.

S & F in repairs, PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F in repairs, 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F in repairs, 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F in repairs, 110 mm dia PVC (SWR) bends of any radius complete all as specified and as directed

S&F in repairs, 75 mm dia PVC (SWR) bends of any radius complete all as specified and as directed

M&L in repairs, for PVC (SWR) floor trap, plain with grating including jointing with solvent cement to waste pipe fixed in cement concrete type (1:2:4) type B1all as specified and as directed.

S&F in repairs, CP health faucet (hand shower) with 8 mm dia, 1200 mm long flexible tube, wall mounted / hooked all as specified and as directed.

S&F in repairs, vitreous China, white, squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest, set in cement concrete including flush pipe and connecting to trap / flushing cistren and making good to floor complete all as specified and as directed.

S&F vitreous china wash down water closet ( pedestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S & F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

S & F in repairs vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed.

S&F in repairs, stainless steel sink with drain board made of 1mm thick sheet for kitchen including plugs, washers, waste pippe, cast iron cantilever brackets, connecting union to pipe, over all size 915 mmx 460 mm with bowl size 410 mm x 330 mmx 160 mm all as specified and as directed.

S&F in repairs, stainless steel sink made of 1mm thick sheet for kitchen including plugs, washers, waste pipe, cast iron cantilever brackets, connecting union to pipe, over all size 495 mmx 420 mm with bowl size 410 mm x 330 mmx 160 mm all as specified and as directed.

M&L in repairs for vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe) including urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), PVC connection, 40mm PVC waste pipe & 40 mm waste coupling providing and fixing plugs, bedding urinal against wall in mortar 1:2, securing urinal to plug, with and including 60mm long screws, pointing around urinal back in cement, fixing flush pipe, complete all as specified and as directed.

M/s IBEX Engineers and Contractors

AMAR CONSTRUCTION

M/s. N D Karande

Poojan Infra and Developers

M/S. Z.K.ENTERPRISES, AHMEDNAGAR

Avinash B Kullal

R. T. Saluji