REPAIR TO WALL PANELING, FLOORING SPALLING INTERNAL PLASTER / EXTERNAL CRACKS WATER PROOFING OF RCC ROOF AND REPAIR/REPLACEMENT /CLEANING OF SEWAGE LINE, MANHOLES,WC PAN, GULLY TRAPS, ETC IN AREA I AT AGE B/R (W) UNDER GE (W) COLABA

Amount

M&L for minor cleaning work, removal of loose concrete and filling cracks with polymer modified mortar using SmartCare RP or Epoxy Mortar and supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, SmartCare Ultron liquid membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying SmartCare Ultron or approved equivalent in two coats at 1.5 kg per Sqm etc, complete as per Manufacturer specifications. Supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, SmartCare Ultron liquid membrane with an elongation of 600% and tensile strength of 12.6 N/Sqmm as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying SmartCare Ultron or approved equivalent in two coats at 1.5 kg per Sqm etc, complete as per Manufacturer specifications over and including padding of cement concrete Type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) 40mm average thick on RCC roof surfaces and all other similar works all as specified and directed (SmartCare Ultron Hybrid Polyurea /DR Fixit roof Seal ultra or any equivalent)

M&L for filling cracks by cutting 'V' groove cracks of internal or external plaster of walls, ceilings/Chajjas all along the crack upto 10 mm and remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat and for external application must be coated with paint including necessary scafolding of any hieght all as specifed and direcetd. Make : Use of Dr Fixit Crack 'X' shrinkfree paste compound/ Smartcare Texture Crack Filler / Build Core Compound / Fosroc Compound, as approved by GE

M&L for cleaning all loose laitance on the wall and concrete substrate and applying one coat of epoxy bonding agent of SBR latex on exposed concrete surface to ensure bond between old concrete & new concrete by brush application including scafolding at any height of bldg as specified and directed. Make: Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd or Nerolac perma SBR latex

M&L for plastering 20 mm thick average Polymer modified mortar (ready mix pack) in two coat 15 mm base coat and 5 mm finishing coat with and including curing as per manufacturer's instruction all as specified and as directed. Make : Dr. Fixit Repair Pro Polymer Mortar, Fosroc RENDEROC S2 structural grade polymer mortar, ShaliFix FRM Polymer Modified Fiber Reinforced Mortar of STP or equivalent as approved by GE

M&L in repairs Anti Skid coloured ceramic tiles 7 to 8 mm thick (Square / Rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes all as specified and directed. Make : Johnson / Kajaria / AGL

M&L in repairs coloured glazed digital ceramic wall tiles 300x450x7mm / 300mm x 600mm x 7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles laid over 10mm thick plastering in cement mortar (1:4) all as specified and directed. Make : Johnson / Kajaria / AGL

M&L in repairs coloured double charged polished glazed vitrified tiles 10 mm thick (Square / Rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.72 sqm in floors set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes all as specified and directed. Make : Johnson / Kajaria / AGL

M&L in repairs coloured double charged polished glazed vitrified tiles 10 mm thick (Square / Rectangular) polished area of each tile exceeding 0.36 sqm but not exceeding 0.72 sqm in vertical surfaces such as skirtings and dados set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over 10mm thick plastering in cement mortar (1:4) all as specified and directed. Make : Johnson / Kajaria / AGL

M&L coloured, digital glossy/Matt outdoor elevation ceramic tiles in vertical surface 450X 350X 7mm/600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shades of the tiles including 10 mm thick rendering coat in CM 1:4 all as specified and directed by Engineer-in-Charge Make - (Make-Varmora(GL-1001 to 1032 of any type ) /Johnson/ Kajaria or equivalent)

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in flooring and all other similar works all as specified and directed.

M&L for 50 mm thick PCC 1:2:4 type B1 (using 12.5 mm graded crushed stone aggregates) as in floor, finished cement concrete surfaces even and smooth using extra cement all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados, etc. laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.

M&L for granite (of any colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, counter for wash basin, flooring and dado all other similar works including 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for 20mm thick approved colour marble tiles machine cut in skirting/dado or floor laid over cement screed and jointed with grey cement slurry including cutting and polishing laid over including 10 mm thick rendering coat in CM 1:4 all as specified and directed.

S&F in repair 20 mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, grit polishing followed by wax etc. with and including 20mm thick screed bed in CM 1:4 all as specified and directed.

All as per item above item no 16 but as in skirting/ riser/ dado etc with and including 10 mm thick backing coat in CM 1:4 all as specified and directed.

S&F in repair 2.00 mm thick PVC sheet laminated plain coloured, marbled mosaic or mottled finish of any colour laid with approved rubber based adhesive in floors after preperation of floor surface all as specified and directed. Make : Royal House/ Premier Poly Film Ltd.

M&L in repairs heavy duty durable parking tiles area exc 0.16 but n exc 0.36 sqm area with 12-14 mm thick colour in floors etc. with and including 50 mm thick bedding in CM ( 1:6) , set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles all specified and directed by Engineer in charge. Make : Johnson / Kajaria / somany

M&L in repairs machine pressed precast concrete interlocking paver block of any shape and size and colour confirming to IS 15658-2006 of 25/30 mm thick M-35 Grade laid over 50 mm thick sand cushioning all as specified and directed.

S&F in repair 12mm thick, toughened glass for door shutters, partitions in bathroom or other places, shelves, table top etc and in similar work with and including fitting and fixtures such as glass handles stainless steel studs, fittings for door pivots all as specified and directed.

Supply and fixing Sun control film, 50 micron non reflective type, sticked to glass as per manufacturers instructions all as specified and directed.

S&F in repair stainless steel 202 Stain finish Handle D type, 25mm dia 600mm long for glass shutter all as specified and directed

S&F in repairs bottom/top patch fitting for pivot all as specified and directed

S&F in repair bottom lock patch fitting all as specified and directed

M&L in repairs 6mm thick ply wood, grade BWR, type BB fixed with screws to timber frame work for cupboards all as specified & directed.

S&F in repair 300mm, helical door spring rod pattern springs including roller and roller plate complete heavy duty and fixed all as per manufacturer's instruction all as specified and directed.

S&F in repair for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction all as specified and directed.

S&F in repairs Roller blinds horizontal and vertical type made out of standard fabric, thickness 2mm of approved texture with necessary accessories etc. (sample as approved by GE) all as specified and directed.

S&F in repairs coloured glass mosaic tiles of size 25mm x 25 mm having thickness 6-8 mm for swimming Pool or any other places following SOP for Walls and Floor jointed & pointed with epoxy tile grout with the colour of tiles using water proofing tile in vertical & horizontal surfaces with tile adhesive mixed with latex admixture (MYK LATICRETE or equivalent) and 3mm wide joints pointed in matching colour of epoxy grout (MYK LATICRETE SP 100) or other equal & approved all to manufacturer’s printed instruction and laid to approved pattern on backing cement-sand render & screed (measured separately) all as specified and directed. Note : (a)Tile should be applied by experienced applicator who has completed swimming pool work at other places. Applicator must show its completed projects application to Engineer-in-charge before going ahead with works (b) Tile design sample has to be produced by the contractor and passed by GE before application.

M&L in repair for 8/10 mm thick PVC ceiling or wall panelling (any colour) with aluminium frame work for receiving ceiling board / wall panelling including all necessary accessories for fixing at various levels all as specified and directed.

M&L in repairs for GI powder coated frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre all as specified and directed.

M&L in repair for 8 mm thick calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 605 X 605 mm grids all as specified and directed.. Note:- Frame work for ceiling shall be measured and paid separately.)

M&L in repair 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface with GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre with & including Hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long all as specified and directed.

Extra over above items no. 34 above for any sunk or raised moulding all as specified and directed.

M&L in repairs for fixing sports multi-colored rubber flooring of thickness 8-10mm using necessary adhesive including all accessories all as specified and directed.

M&L in repairs for Stainless Steel grade 306 decorative designer railings, staircase, covers, sitting place, shed etc. (design and pattern as approved) made out of SS pipes mirror or wire brush finish, SS flats (plane or chequered) & SS plates cutting to desired shape, 1D Finish etc. complete with and including required cutting, notching organ welding, riding and drilling counter sunk holes, as required and bending to required shape by mechanical means in factory as per site requirement without forming wrinkles and butting and buffing / polishing fixing with necessary nut bolts and fixtures and filling the holes with microconcrete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

M&L framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes, nuts and bolts, welding, etc conforming to I. S.1161- 1979 grade St.-240 all as specified and directed. Note : (a) The shape/ design of the sheds will be as approved by GE. (b) Rate quoted by the contractor shall be deemed to be inclusive of cost of rounding structural steel members used.

S&F mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality- A including welding, nuts and bolts all as specified and directed.

S&F in repairs pre-painted galvalume aluminium zinc coating GI based trapezoidal profile roofing sheets 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings /cladding having effective & overall width 1015 mm &1072 mm respectively, profile height 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings at any height of the bldg all as specified and directed. Note : Rate quoted shall be inclusive of any overlapping. GI sheet should have a minimum over lapping of 10 cm while fixing in case of roof covering.

S&F in repairs pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F in repairs PVC tensile fabric structure with PVDF (polyvinyl-idene-fluoride) coating with all necessary fixtures, of any size and shape for making canopies, shed etc. fixed with mild steel structural frame work, weight of the fabric is considered, with fabrics ranging from 900 gsm to 1200 gsm all as specified and directed. Note : (a) The shape/ design of the sheds will be as approved by GE. (b) Cost of structural steel used will be measured and paid separetly under relevant items in this schdule. Make: Mehler/ Sieon/ Haytes/ Ferrari or equivalent as approved by GE.

S&F 4mm thick panel of any type, pattern and shape Aluminium Composite Panel (ACP), aluminium thickness 0.5mm, front side finish of aluminum roll coated with plain / coloured / wooden texture PE / PVDF, core material of Non-toxic polyethylene, Macromolecular lamination film, rear side of Aluminum coated with primer including frame work using of fasteners, including concealed screws, nuts, bolts and other items required for connecting aluminium to aluminium / steel / wooden / ply board, blind rivets all fixing anchors, brackets and similar attachments used in the erections, shall be of aluminium, non-magnetic stainless steel, zinc coated steel, for fixing in both internal / external wall cladding complete weather proofing sealant of a polyurethane elastic joint / structural silicone sealant / pre-formed gaskets to the horizontal & vertical joints in the Aluminium cladding / facade as per manufacturer's instructions all as specified and directed. Note : 1. The unit rate quoted shall be deemed to be inclusive of all necessary fixing acceserries mentioned in the description of work and scaffolding works at any height for installation. 2. For payment purpose panels areas will be measured on one side only.

M&L in repairs for 12 mm thick ready mix plaster in single layer on brick wall or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces (internal surface) and finished even & smooth without using extra cement all as specified and as directed. Name of Manufacturer: M/s ACC acopalst/CK Birla Aerocon/Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

M&L in repairs for 20-25 mm average thick Ready Mix Plaster in multi layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces all as specified and directed. Note :- Liquid water proofing compound will be measured and paid seperately as supply only.

M&L for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of epoxy paint over two coat of epoxy primer all as specified and directed. Make : Asian paints PPG / Berger protective coating or equivalent

M&L for preparing newly plastered surfaces of walls/ceilings by scrapping/rubbing and applying two coats of Anti-fungal, dust resistant, water repellant, crack-bridging, weather proof type (Ist quality), exterior acrylic emulsion paint (100% Acrylic) base coat of Apex ultima of Asian Paints, protek duralife and top coat of Apex Ultima protek, over a coat of "Trucare" exterior wall primer, through authorized applicator only all as specified and directed. Make: Asian Paints / Berger Paints ( Weather coat All Guard) / Nerolac (Excel Top Guard) / Dulux Paints ( Dulux Weather shield Max), sample as approved by GE.

M&L preparation of newly plastered wall surfaces and applying a coat wall care putty (Birla White Wall care or equivalent) 2mm thick ( in two coat 1 mm each) average on plastered surfaces rubbing with sand paper, preparatory to distempering and applying two coats of acryilic emulsuion over a coat of alkali resistant priming paint all as specified and directed. Make : Apcolite Premium Emulsion

S&F in repairs powder coated aluminium frame/shutters for partition, doors, windows, ventilators etc. including joining cleat for fixing, PVC rollers, locking arrangement, rubber beading, rubber gasket, glazing, screws, handles, hinges, tower bolts Make: JINDAL/HINDALCO/INDALCO. Note :-(i) The rate quoted shall be deemed to be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as hinges, handles, locking arrangement which shall not be measured seperately (ii) Item shall be paid as per weight of aluminium section. (iii) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

M&L Anodized Aluminium grill with and including suitable aluminium anodized 25 to 30 micron E/H section frame, 1.5mm thick as required with aluminium riveted/ screwed attachment all as specified and directed. Note :- Aluminium grill shall be of Deco grill of M/s ELESAR FOCCHI Ltd. as per design No. DG 102 , 7.5mm size i.e. 6mm thick and 7.5mm wide or approved design in M/s Royal grill / National grill.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples over wooden beading all as specified and directed.

S & F in repairs Aluminium woven wire mesh sheet cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples and wooden beading all as specified and directed. Note :- Rate quoted shall be deemed to be inclusive of fixing of wire cloth in wooden as well as in aluminium frame .

M&L for 5.50 mm thick sheet glass, ordinary quality and glazing oil putty or with wooden beading in squares n exc 0.50 sqm in each pane all as specified and directed.

M&L in repairs for two coats of epoxy based paint for concrete surface over one coat of epoxy primer mixed with silica sand to get grit finish on top. Before applying epoxy primer, prepare the surface from any undulation (using wire brush or electric floor scrubber) removing all oil and grease stain if any, and brooming the surface clean to remove any settle dust particle. Apply the primer and let it dry for 24 hour and then apply the epoxy paint with desired color all as specified and directed.

S&F in repairs synthetic hetrogeneous 100% PVC flooring court waterproofing matt with 4.50 mm thick with approved colour ITF ISO 9001-14001 aprrroved system marking of Baselines, Endlines, side lines, free through lines, hot solding line marking all as per ITF specification all as specified and directed.

S&F in repairs 250 mm long brass, barrel tower bolt of extruded section all as specified and directed.

S&F in repairs for 200 mm long brass barrel tower bolt of extruded section all as specified and directed.

S&F in repairs 300 mm long brass sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections all as specified and directed.

S&F brass pressed handles, oval type, designer of 200 mm size for doors fixing all as specified and directed .

M&L for writing letters or figures (Block, Roman, Itallic or Indian) exc 30cm high of any colour and paints including necessary scaffoldings at any height all as specified and directed.

S&F in repairs of SS 304 Grade metal letters of height 200mm with PU paint to match the logo colours, mirror polish finish, anti rust and including necesssary arrangements to fixing in walls, using scaffolding at any height og bldg all as specified and directed.

S&F in repairs 35 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, both faces is covered with decorative face Laminate both side with including 5mm thick teakwood lipping all around / frame to match on both side with supply & fixing stainless steel 7.5 inch Mortice 7 lever door lock, double action with handle, butt hinges all as specified & directed.

M&L for cleaning of all blockages of Nahani trap/floor trap, bottle trap, gully trap, P or S traps of WCs, 100mm / 75 mm dia CI pipe and stacks upto 1st manhole, CI/SGSW pipe between gully trap and 1st manhole, CI Tee/door bends etc to maintain internal sewage system by employing two sweeper on all working days from 0900 hours to 1700 hours in the Area-IV of AGE B/R (West) Colaba with manual/pressure cleaning pump & flexible rods and other neccessary equipments all as directed by Engr-in-charge.

All as per item No 65 above but on emergency basis one sweeeper on Sunday / closed holiday /Gazetted holidays on call of Engr-in-Charge/JE.

M&L for cleaning and desilting of sewage lines 150 mm dia pipe line at any depth by pumping out /removing liquid waste/sewage, plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same (silt, sludge & other waste material) in leak proof trucks covered with tarpo line to outside of MoD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water etc complete all as specified and directed by Engr-in-Charge. (a) If required getting a honey sucker and cleaning the heavily congested sewage line. (b) JCB and other machinery required on special basis would be called on requirement basis.

All as per item No 67 above but 200 mm dia pipe line

All as per item No 67 above but 300 mm dia pipe line

M&L for cleaning and desilting of manholes depth not exceeding 1.50 meter by pumping out/removing liquid waste/sewage and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same (silt, sludge & other waste material) in leak proof trucks covered with tarpo line to outside of MoD land all as per existing rules and regulations of civil authorities and cleaning the manholes with freah water etc complete all as specified and directed by Engr-in-Charge . (a) If required getting a honey sucker and cleaning the heavily congested sewage line. (b) JCB and other machinery required on special basis would be called on requirement basis.

Cleaning and desilting of manholes depth exceeding 1.50 m but not exceeding 3.00 m by pumping out/removing liquid waste/sewage and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same (silt, sludge & other waste material) in leak proof trucks covered with tarpo line to outside MoD land all as per existing rules & regulations of civil authorities and cleaning the manholes with freah water all as specified and directed.

Removing/cleaning of chocks/blockades of sewage of any size between manholes at any depth including pumping liquid waste/sewage, plugging and diverting the flow in the drain if necessary using Kampti/cleaning rods, choke removing machine etc and including taking precautionary and safety measures such as use of safety belts, dry cells, torch for lighting inside the manholes and drains etc including drains manholes on either side and sewers passing hole knots disc of required size and sprinkle bleaching powder at places from where they are removed all as specified and directed.

Cleaning the chocks/blockades in AC/CI/PVC soil waste/rain water pipe of any dia by removing cleaning eye and refixing the same after cleaning the pipe, making good damaged cement joints, dia of pipe not exc 150mm dia upto ground/stilt plus four floors including necessay scafolding all as specified and directed. Note :- Rate quoted shall be deemed to be inclusive of removing of trees upto 14th floor and filling of holes with water proofing compound.

All as per item No 73 above but 5th to 8th floor

All as per item No 73 above but 9th floor to 12th floor

S&F in repairs cleanings eye (oval access door) for bends, branches, etc of dia not exceeding 100mm at any floor level

Empting choked up sewage lines and manholes exceeding 3.00 mtr depth by providing sewage suction vehicle of capacity 5000 ltrs (BMC Pattern) including necessary other arrangments such as sweepers to clean up the site after work and desposing the same at places earmarkd outside MOD land upto 25 KM lead and lift complete all as specified and directed. Note :- (a) All precautions to be taken by all workers while working in foul condition. Contractor shall take all necessary actions. (b) After cleaning vehicle will be contractors property. (c) Contractor accredated representative shall be available during the cleaning. (c) Complete process shall be completed in all respects within a day.

Cutting into existing manhole for connecting new drain, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC1:2:4 type B1, smooth finished and reforming benching as required for internal pipe of dia 100 mm all as specified and directed.

Cutting into existing manhole for connecting new drain, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC1:2:4 type B1, smooth finished and reforming benching as required for internal pipe of dia 150 mm all as specified and directed.

Excavating in trenches, in hard dense soil n exc 1.5 m width n exc 1.5 m depth in any type of soil and getting out all as specified and directed.

All as item no 80 above but depth exceeding 1.5 m all as specified & directed

S&F in repairs reinforced concrete pipes, class NP2, 200 mm dia laid and jointed with collars all as specifed and directed.

S&F in repairs reinforced concrete pipes, class NP2, 150 mm dia laid and jointed with collars all as specifed and directed.

S&F in repairs for providing, lowering and laying HDPE DWCPE (SN8) pipes as per IS : 16098 of 2013, 150 mm ID, laid and jointed with and including elastomeric sealing 'O' ring as per manufacturer's instructions all as specified and directed. Note - The rate quoted includes for laying pipes level or to falls in trenches, etc. on concrete bed or directly on hard ground as indicated and making joints and testing as specified.The rate quoted also include for all necessary extra joints, waste, and cutting etc.

S&F in repairs for providing, lowering and laying HDPE DWCPE (SN8) pipes as per IS : 16098 of 2013, 200 mm, laid and jointed with and including elastomeric sealing 'O' ring as per manufacturer's instructions all as specified and directed. Note - The rates include for laying pipes level or to falls in trenches, etc. on concrete bed or directly on hard ground as indicated and making joints and testing as specified.The rates include for all necessary extra joints, waste, and cutting etc.

M&L PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) for concrete bed to 150 mm dia drain pipes including packing under and hauching & benching against the sides of pipes after they are laid and tested all as specified and directed Note :- (i) Thickness of bed concrete below the barrel of pipes: 15cm for pipes 200mm dia and over. (ii) Width of bed: Outer diameter of drain pipes (not of sockets/collars) plus 30 cm (iii) The rate quoted shall include for any necessary shuttering and supports to concrete and for laying beds to falls.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) for concrete bed to 200 mm dia drain pipes including packing under and hauching & benching against the sides of pipes after they are laid and tested all as specified and directed. Note :- (i) Thickness of bed below the barrel of pipes: 15cm for pipes 200mm dia and over. (ii) Width of bed: Outer diameter of drain pipes (not of sockets/collars) plus 30 cm (iii) The quoted rate includes for any necessary shuttering and supports to concrete and for laying beds to falls.

Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm in soft/loose soil all as specified and directed.

Removing excavated soil to a distance nexc 50 m and depositing where directed at a level not exc 1.5 m above the starting point all as specified and directed.

M&L in repairs to brick work with sub class 'B' bricks straight or curved on plan exc 6 metre mean radius with old size bricks built in CM 1:6 for cracked wall of manholes, septic tank, soak pits, etc. complete all as specified and directed.

M&L in repairs PCC 1:2:4 grade Solid block masonary size 390x200x230 mm, built in cement mortar 1:6 all as speified & direted

M&L for Except bricks with old size sub class 'B' bricks (obtained from demolition) straight curved on plan exceeding 6 metre mean radius with old size bricks built in CM 1:4 for cracked wall of manholes, septic tank, soakage pits etc complete all as specified and directed.

M&L for cement concrete 1:2:4 type B0, (using 12.5 mm graded crushed stone aggregate) as in coping/cills necessary form work weathering, slightly rounded or chamfered angles and throating all as specified and directed.

M&L PCC (1:3:6), type C2 (using 40 mm graded crushed stone aggregate ) as in foundation filling and mass concrete for bottom of manhole including demolition complete all as specified and directed.

M&L for RCC (1:2:4), type B1 (using 20 mm graded crushed stone aggregate) precast cement concrete cover slab for manholes and similar articles with plain face, set in cement mortar 1:4 including demolition all as specified and direceted.

S&F TMT bars 8 mm dia cut to length, bent to shape required including cranking binding with MS wire (annealed) not less than 0.9 mm dia all as specified and as directed.

M&L in repairs PVC (SWR) multi floor trap with grating including jointing with solvent cement for diameter of 75 mm outlet all as specified and as directed.

S&F in repairs brass 7 levers mortice night latch, size 100 mm including safety chain all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement/adhesive including dismantling of existing gully trap with chamber and making new chamber with PCC 1:2:4 type B1 covered with RCC cover all as specified and directed.

S&F in repairs 110 mm dia PVC (SWR) pipes, type B, single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls to pipe difference 100 mm including stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays including all steel scaffloding arrangments all as specified and directed by Engr-in-charge.

S&F in repairs 75 mm dia PVC (SWR) pipes, type B, single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls to pipe difference 100 mm including stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays including all steel scaffloding arrangments all as specified and directed by Engr-in-charge.

S&F 75mm dia PVC (SWR) bends with access doors any radius all as specified and as directed.

S&F 110 mm dia PVC (SWR) bends with access doors any radius all as specified and as directed.

S&F 75 mm dia PVC (SWR) junction single, (single T) equal or uequal provided with access door all as specified and directed.

S&F 110 mm dia PVC (SWR) junction single, (single T) equal or uequal provided with access door all as specified and directed. (Note : upto 5th storey of bldg)

S&F 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal all as specified and directed.

S&F 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal all as specified and directed.

S&F 75 mm PVC (SWR) branch piece, single (double Y) equal or unequal all as specified and directed.

S&F 110mm PVC (SWR) branch piece, single (double Y) equal or unequal all as specified and directed.

S&F 75 mm dia PVC (SWR) vent cowl all as specified and as directed.

S&F 110mm dia PVC (SWR) vent cowl all as specified and as directed.

S&F in repair for LED curb stone of size 500x150x200 mm made out of 5 foundation rods ensuring complete protection against theft and having a LED strip of lenght 470 mm with 22 nos LED which is plastic coated and having adequates number of connectors and one power supply kit as per manufacture requirement all as specified and as directed. Note- Item includes connection to main electric supply from near by electric sources. Make Hydrose LED Curb stone or equivalent as approved by GE

Cleaning of open drains completely by removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains n. exc. 30 cm .

Cleaning of open drains completely by removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains exc. 30 cm but n.exc. 60 cm .

Cleaning of open drains completely removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains exc. 60 cm but n.exc. 75 cm .

Cleaning of drains/culverts including by removing & re-covering of RCC/CI/Steel covers by completely removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains n. exc. 30 cm .

Cleaning of drains/culverts including by removing & re-covering of RCC/CI/Steel covers by completely removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains exc. 30 cm but n.exc. 60 cm .

Cleaning of drains/culverts including removing & re-covering of RCC/CI/Steel covers by completely removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains exc. 60 cm but n.exc. 75 cm .

S&F in repairs 900mm x 600mm FRP manhole cover of 8 tonne loading capacity with frame laid over manhole coping concrete in CM 1:6 all as specified and directed.

S&F cast iron manhole covers alongwith frame grade A-35 T/A-350 KN, machined each exceeding 5 Kg by weight all as specified and directed by EIC. Make : Neco

S&F in repairs 9 feet pulley operated cloth drying system, aluminium anodized 20 mm dia pipes, channel assembly, locking system to hide rope knot, ropes 4 mm dia HDPE double core & fitting material etc. (sample as kept in GE office) complete all as specified and directed Make: Easy dry or other equivalent make, sample as approved by GE.

Frends Enterprises

Bidder Name

Frends Enterprises

NATH CONSTRUCTION