SPECIAL REPAIR /REPLACEMENT OF BER PUMPS AND MOTORS OF WATER SUPPLY INSTALLATION UNDER GE (W) AGRA

Amount

Taking down carefully of old/ UNSV Pump of any capacity from the site and deposit at MES E&M store/ Salvage yard for keeping in safe custody complete all as specified and directed.Engr-in-Charge.

Supply and install Pumping sets , Centrifugal electric driven 30 HP, confirming to IS: 12469 of 1988 with CI casing and impeller and carbon steel shaft, shaft sleeve bronze mounted on heavy duty bearings suitable for continuous operation ,RPM not less than 2900, AC 415Volts, three phase, 50 Hz with pump set 30 Mtr Head fixed on angle iron base frame with nuts, bolts, washers, groutting including PCC foundation work etc and Head-48 Mtr and Discharge Cap-1700 LPM complete all as specified and directed by Engr-in-Charge.

Supply and install Pumping sets , Centrifugal electric driven 20 HP, confirming to IS: 12469 of 1988 with CI casing and impeller and carbon steel shaft, shaft sleeve bronze mounted on heavy duty bearings suitable for continuous operation ,RPM not less than 2900, AC 415Volts, three phase, 50 Hz with pump set 30 Mtr Head fixed on angle iron base frame with nuts, bolts, washers, groutting including PCC foundation work etc and Head - 30 Mtr and Discharge Cap - 2000 LPM complete all as specified and directed by Engr-in-Charge.

Supply and install Pumping sets , Centrifugal electric driven 15 HP, confirming to IS: 12469 of 1988 with CI casing and impeller and carbon steel shaft, shaft sleeve bronze mounted on heavy duty bearings suitable for continuous operation ,RPM not less than 2900, AC 415Volts, three phase, 50 Hz with pump set 30 Mtr Head fixed on angle iron base frame with nuts, bolts, washers, groutting including PCC foundation work etc and Head-24 Mtr and Discharge Cap - 1875 LPMall as specified and directed by Engr-in-Charge.

Supply and install Pumping sets , Centrifugal electric driven 10 HP, confirming to IS: 12469 of 1988 with CI casing and impeller and carbon steel shaft, shaft sleeve bronze mounted on heavy duty bearings suitable for continuous operation ,RPM not less than 2900, AC 415Volts, three phase, 50 Hz with pump set 30 Mtr Head fixed on angle iron base frame with nuts, bolts, washers, groutting including PCC foundation work etc and Head - 30 Mtr and Discharge Cap - 900 LPM complete all as specified and directed by Engr-in-Charge.

Supply installation, comissioning and testing of submersible pump electric driven 415 V, suitable for 250 mm dia borewell (Casing Pipe 300/350 mm) supply and install complete upto 20 HP, 08 Stage, Head -72, Mtr Discharge Cap - 810 LPM

Supply and fix including testing and comissioning monoblock pump set suitable for 415 V, 3 Phase syatem having capacity 15 HP, Head -40Mtr Discharge Cap - 17.7 LPS.

Supply and fix star delta fully automatic suitable for 415 V AC for 15 HP Motor

Supply installation, comissioning and testing of submersible pump electric driven Single Phase 01 HP, Head - 47 Mtr and Discharge Cap - 40 LPM.

Supply installation, comissioning and testing of submersible pump electric driven Single Phase 03 HP, Head - 62 Mtr and Discharge Cap - 150 LPM.

Supply and fix DOL Starter fully automatic suitable for 1 to 03 HP Motor

Supply and Fix PVC insulated FRLS Round Sheathed Multi Core Bright annealed Bare Copper conductor havy duty industrial flexible cable for Voltage Grade 1100 Volt, 25 Sqmm 3 Core.

Supply and Fix PVC insulated FRLS Round Sheathed Multi Core Bright annealed Bare Copper conductor havy duty industrial flexible cable for Voltage Grade 1100 Volt, 10 Sqmm 3 Core.

Supply and Fix PVC insulated 3 core flat submersible cable with bare bunched copper conductor 1100 Volt, 4 Sqmm

Supply and Fix PVC insulated 3 core flat submersible cable with bare bunched copper conductor 1100 Volt, 6 Sqmm

M & L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Looose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:3 of SSR part-1 .

Supply & Laying GI Pipe Flange Type heavy duty 80 mm dia

Yield testing for the bore well with the help of V notch tank 90 degree by continuously pumping for 16 Hrs. complete all as specified and directed.

Supply and fixing UPVC column pipe 80 mm bore 12 Kg working pressure standard grade for pump set including plastic rope for supporting of submersible motor necessary fitting and connection to submersible pump complete all as specified and directed by Engr-in-Charge.

Chemical and bacteriologocal testing of sample from approved laboratory to ensure portability of water complete all as specified directed by Engr-in-Charge.

S&F in repair cast iron Non return valve 80mm bore ISI marked both ends flanged including rubber gasket, MS bolts, nuts, washers and testing complete all as specified and directedEngr-in-Charge. .

S&F in repair cast iron non return valve 100mm bore ISI marked both ends flanged including rubber gasket, MS bolts, nuts, washers and testing complete all as specified and directed Engr-in-Charge.

S&F in repair cast iron non return valve 150mm bore ISI marked both ends flanged including rubber gasket, MS bolts, nuts, washers and testing complete all as specified and directed.Engr-in-Charge.

S&F in repair sluice valve, Class PN-1, 150 mm dia both end flanged with high tensile SS spindle with lock nut (gutka), ISI marked complete with jointing materials such as rubber packing, nuts, bolts & washers complete all as specified & directed by Engr-in-Charge.

S&F in repair sluice valve, Class PN-1, 100 mm dia both end flanged with high tensile SS spindle with lock nut (gutka), ISI marked complete with jointing materials such as rubber packing, nuts, bolts & washers complete all as specified & directed by Engr-in-Charge.

S&F in repair sluice valve, Class PN-1, 80 mm dia both end flanged with high tensile SS spindle with lock nut (gutka), ISI marked complete with jointing materials such as rubber packing, nuts, bolts & washers complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement fully automatic star delta starter for 30 HP Centrifugal Pump Set / Submersible Pump Set, confirming to IS/ IEC 60947-4-1, IP-54,415 Volt, extended wide band coil with FRLS internal wiring, star type-Air break and class H insulation complete all as specified and directed by Engr-in-Charge.

All as per item No 27 above but 20 HP

All as per item No 27 above but 15 HP

All as per item No 27 above but 10 HP

C P Singh and Co

RAJESH ENTERPRISES

Balaji Associates

rohan traders