SPECIAL REPAIR TO BUILDING NO P 78 01 TO 12 TOTAL 12 QTRS IN KSE AT PATIALA

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and as directed.

Material and labour for rendering10mm thick on brick work or concrete surfaces in cemet mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering cement plastering 15mm thick on brick work or concrete surfaces or in chajjas/parapet walls etc in cemet mortar 1:4 mixed with liquid water proofing compound as per manufacturer's instructions finished even and smooth without using extra cement and fixing of chicken wire gauge where directed complete all as specified and as directed. Note : WPC and chicken wire gauge will be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified and as directed. Make : Pidilite/Sika

Material and labour rendering 10mm thick on ceilings or concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and as directed.

Material and labour for applying ready made wall care putty on internal/external plastered surfaces of walls /ceilings /soffits (thickness vary from 2 to 3 mm as required for desired smoothness and levelling of surfaces in two or more layers) including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for prepration of plastered/ unplastered surface of walls and ceiling and applying two coats of ditemper oil emulsion (OBD) , over & including a coat of chalk whiting primer as complete all as specified and as directed by Engineer-in-Charge.

Material and labour for prepration of plastered/unplastered surface of wallss/ RCC surface/ soffits of chajjas/roof projection/balconies etc and applying two coats of exterior emulsion paint ( light shade) @ 5 sqm/litre/2 coats by using rollers on external surface over and incuding a coat of exterior primer applied @11sqm/litre/01 coat over one/more coats of putty including filling of voids and depressions with putty for making the surface smooth and even complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Mild Steel Pressed steel frames of size 105x60mm made out of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,including making holes in brick work built in cement mortar for hold fasts of required size for new chowakats and making good the disturbed surface to match with existing surface complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Mild Steel Pressed steel frames of size 105x60mm made out of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.including making holes in brick work built in cement mortar for hold fasts of required size for new chowakats and making good the disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in holdfast blocks/ filling in back of chowkats complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing factory made flush shutters 35mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing aluminium anodised tower bolt of 200mm extruded section and fixed complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing aluminium alloy sliding door bolt with hasp,staple bolt type and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300mm long complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing aluminium handles 150mm long fabricated type anodised complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing floor door stopper over all width of cover plate 150mm of aluminium alloy body and tounge ,anodised with hard drawn steel spring,fixed in floor complete all as specified and as directed by Engineer-in-Charge.

Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K or approved equivalent, having 100% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., all as per manufacturer instructions complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet , reinforced with steel square tube , complete all as specified and as directed by Engineer-in-charge.

Supply and fixing stainless steel steel wire cloth 0.36 mm nominal dia of wire and average width of apertutre 1.40mm fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge..

Material and labour for preparation of new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair stainless steel tubing of 25 mm dia chromium plated minimum. 1.0 mm wall thickness as in curtain rod complete including 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc complete all as specified and directed by Engineer-in-Charge. Note : For the purpose of measurement and payment running length of curtain rod only shall be considered.

Dismantling, floor, hearth or wall tiling includin

g CM bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Material and labour for Non skid ceramic coloured tiles 7-8mm thick (square/rectangular) as in floor area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile laid over and including including 15mm thick screed bed in cement mortar cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge..

Material and labour for Glazed ceramic coloured tiles of approved shade,design and finish of size 450 X 300 mm and 8-9 mm thick, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry, laid over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement mixed with pigment to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge. Note : Dado should be flushed with the wall plastering.

Supply and fixing in repair cockroach trap gratings AISI-304 of size 100mm dia complete all as specified and as directed by Engineer-in-Charge..

Taking up or down existing 20 mm bore dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-Charge.

Taking up or down existing 15 mm boe dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-Charge..

Supply and fixing 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc including necessary cutting and chases n,exc 10 cm in width or girth, in brick work built in cement mortar or RCCsurface and making good the disturbed surface to match the existing surface complete all as specified and as directed by Engineer-in-Charge..

Supply and fixing cast iron cowls for 100 mmbore cast iron pipe complete all as specified and as directed by Engineer-in-Charge

Supply and fixing in repair SGSW gully traps, (Centrifugal type) 150 x 150mm size, square or round mouthed, type 'P' complete all as specified and as directed by Engineer-in-Charge

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed by Engineer-in-Charge

Demolition of mud in roofs, any thickness, including plastering and leeping(whether full thickness removed or only a part thereof) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed by Engineer-in-Charge.

Material and labour for cement concrete 1:3:6, type C-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 45mm to maintain slope of 1:100, complete all as specified andas directed by Engineer-in-Charge.

Material and labour for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed by Engineer-in-charge

Material and labour for Brick work with old size sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

Material and labour for cement concrete 1:3:6 type C-2 using 40mm graded stone aggretgate, as in base for PVC tanks complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs,complete all as specified and as directed by Engineer-in-Charge. Make:- KAFF/Hettich

Supply and fixing tower bolts 200mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position complete all as specified and as directed by Engineer-in-Charge. Make : Harrison (Cat No 0812) or equivalent as approved by GE

Supply and fixing D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position complete all as specified and as directed by Engineer-in-Charge. Make : Harrison (Jasmine) or equivalent as approved by GE

Supply and fixing continuous (piano) hinge of stainless steel width of flap 19 mm ( when open) complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructionscomplete all as specified and as directed by Engineer-in-Charge. Make : Hettitch or equivalent as approved.

Supply and fixing D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete all as specified and as directed by Engineer-in-Charge. Make : Harrison (Jasmine) or equivalent as approved by GE

Supply and fixing Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size complete fixed in positioncomplete all as specified and as directed by Engineer-in-Charge. Make : Hettitch/Godrej/Kaff/Harrison

Supply and fixing wardrobe tube/hanging rod for CB of size 20mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position complete all as specified and as directed by Engineer-in-Charge. Make : Hettitch or equivalent as approved.

Supply and fixing stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing cast iron spun pipes,100mm bore, in any length, with or without ears, with cement joints, fixed to walls with and including stack clamps, nuts , bolts etc. including making necessary connections complete all as specified and as directed by Engineer-in-Charge

Supply and fixing Steel rack for kitchen 750m x 600mm of weight not less than 5 Kg each fixed in repair complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparation of New steel surfaces of any description, over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over red oxide primer complete all as specified

Supply and fixing cast iron soil waste and vent spun pipe 75 mm bore in any length with or without ears jointed with cement joints laid in floor including dismantling of old pipes ,excavation,returning filling and levelling the surface etc complete all as specified and as directed by Engineer-in-Charge

Material and labour Black colour Granite 20 mm thick (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like laid over and including 10 mm thick rendering in cement mortar (1:3) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed by Engineer-in-Charge

Material and labour for providing edge moulding to 18-20mm thick granite of counters vanities etc including machine polishing to edge to give high gloss finish complete all as specified and as directed by Engineer-in-Charge

Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete all as specified and as directed by Engineer-in-Charge

Excavating in trenches,not exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of pipes,cables etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out as in soft/loose soil, complete all as specified and as directed by Engineer-in-Charge

Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed by Engineer-in-Charge

Removing excavated materials soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed by Engineer-in-Charge

Supply and fixing PVC (SWR) pipes110mm bore single socketed in any length with rubber joints, laid in trenches/fixed to wall/ laid in floos complete all as specified and as directed by Engineer-in-Charge

Material and labour for cement concrete1:3:6, type C2 (using 40mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of 200mm bore pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge

Supply and fixing PVC (SWR) bends any radius for110 mm bore pipe complete all as specified and as directed by Engineer-in-Charge

Supply and fixing cast iron "P" trap, 600 mm long for 100mm bore dia complete all as specified and directed

Material and labour for reinforced precast cement concrete manhole/drain covers of size exc 0.12 sqm but n exc 1.00 sqm and thickness not less than 50mm thick , of shape square/ rectangular /circular fixed in position including reinforcement and form work complete all as specified and directed. Note:- For measurement purpose it will be measured in cubic meter.

Taking down carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc removing materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of credit and making good the disturbed portion of all floor, ceiling etc all as complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light/fan/bell in new PVC conduit to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment complete all as sp

ecified and as directed by Engineer-in-Charge. Notes:- (i) Switches and regulators shall be measured and paid for separately. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth). (iii) The cost of modular cover plate and metal flush boxes is deemed to be included in the unit rate quoted for this item). (iv) cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs is deemed to be included in the unit rate quoted for this item. (v) Rate of cutting chasing included in the unit rate quoted for this item.

Material and labour for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light point controlled by 2 way and including PVC rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment complete all as specified and as directed by Engineer-in-Charge. Notes:- (i) Switches and regulators shall be measured and paid for separately. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth). (iii) The cost of modular cover plate and metal flush boxes is deemed to be included in the unit rate quoted for this item). (iv) cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs is deemed to be included in the unit rate quoted for this item. (v) Rate of cutting chasing included in the unit rate quoted for this item.

All as per Sl item No 120.00 above here-in-before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and as directed by Engineer-in-Charge.

All as per Sl item No 120.00 above here-in- before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and as directed by Engineer-in-Charge.

All as per item No.120.00 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSH copper earth wire for switch socket combination 3 pin 15 amps on independent board complete all as specified and as directed by Engineer-in-Charge. .

Supply and fixing Modular switch 1 way, 6 Amps, 1 module, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular switch 2 way, 6 Amps, 1 module, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular switch 1 way, 16 Amps, 1 module, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular bell push switch 1 way, 6 Amps, 1 module complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing of Call bell ding dong AC 230 volt single pole ccomplete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of Lamp holder including LED bulb 9 W including flexible wire 0.5 Sqmm copper cable all as specified & directed by Engr-in-charge.

Supply and fixing Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular socket 5 pin 6 &16 Amps, combination type 2 module complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular Fan regulator step type, 120 watts, 2 module complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing ceiling rose surface bakelite surface 65 x 50mm 3 terminalscomplete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement New generation energy saving and environmental friendly long life LED building security light 1x35 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twin core from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement Surface Mounted LED Bulk Head Luminaire of capacity 10 watt with ABS Body & Polycarbonate Diffuser, IP54 inc connection with ,with flexible wire 0.5 sqmm copper cable complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire including taking down u/s sub main wiring complete all as specified and as directed by Engineer-in-charge. Notes :- (i)-2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqm Copper conductor Earth wire shall be measured as one unit) (ii) Rate quoted for this items shall be inclusive of the cost of (iiii) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (iv) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth . (vi) Including taking out/down existing unserviceable sub main wiring.

M & L for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire complete all as specified and as directed by Engineer-in-charge. Notes :- (i)-2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqm Copper conductor Earth wire shall be measured as one unit) (ii) Rate quoted for this items shall be inclusive of the cost of (iiii) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (iv) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth . (vi) Including taking out/down existing unserviceable sub main wiring.

Supply and fixing in replacement MCCB, 4 Pole, 63 A, 16 KA for fixing in DB including proper thimble connection, thermal and magnetic release protection complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement epoxy power coated MCCB distribution box double door VTPN 4 way vertical type AC 415 V with IP 43 protection for MCBs alongwith provision of MCCB as incomer with commen bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified and as directed by Engineer-in-charge. Notes :- (i)MCCB will be measured and paid under seperate item) (ii) Cost of Eye/bottle thimbles used for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (iii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (iv) connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size.

Supply and fixing in replacement of Sheet metal enclosure 8 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable

size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP 43 protection complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement of MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement of MCB , SPN, 240 Volts ,32-40 amp for fixing in DBs of including proper thimble connections complete all as specified and as directed by Engineer-in-charge..

Material and labour for Earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification at page 497.complete all as specified and as directed by Engineer-in-charge.

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable complete all as specified and as directed by Engineer-in-charge.

Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm above with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.

Supply and fixing in replacement of elegatly designed sleek surface mounted pressure die-cast aluminium LED luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver of capacity 12 W LED of 5000 K and making good the existing surface as per existing complete all as specified and as directed by Engineer-in-charge.

Taking down and refixing of ceiling fan after necessary cleaning painting making serial No ccomplete all as specified and as directed by Engineer-in-charge.

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

Supply and fixing exhaust fan AC single phase 230/240 v of size 300 mm sweep 900 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including louver complete all as specified and as directed by Engineer-in-charge.