PERIODICAL SERVICES TO CERTAIN BLDS AND REPAIR TO STORM WATER DRAINS, COMPOUND WALL AND FENCING IN ZONE A AND ZONE B AT MIRAN SAHIB UNDER GE JAMMU

Amount

M&L for preparation of old plastered surfaces and applying one coat of white wash on walls complete all as specified and as directed.

M&L for preparation of old plastered surfaces and applying one coat of white wash on ceiling complete all as specified and as directed.

M&L for preparation of old plastered surfaces and applying one coat of Oil Bound distemper on walls complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying two coat of Oil Bound distemper any color on walls complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coat of cement base paint up to 12 mtr height complete all as specified and directed. Make : Duracem(Berger paints), Gattucem(Asian paints), Snowcem plus

M&L for preparation of old plastered surfaces and applying two coats of exterior emulsion paint any colour up to 12 mtr height complete all as specified and directed colored approved by Engr-in-Charge.

M&L for preparation of old surface of wood rubbing down by sand paper washing by water and applying one coat of synthetic enamel paint over wood surface over 10 cm width or girth complete all as specified and as directed. Make: Asian paints (apcolite), Berger (Luxol high gloss), Shalimar (Superlac).

M&L for preparation of old surfaces of steel over 10cm width or girth including rubbing down by sand paper, washing by water or scrapping the old coat by bloing lamp and applying one coat of synthetic enamel paint over steel surface over 10cm width or girth complete all as specified and as directed. Make: Asian paints (apcolite), Berger (Luxol high gloss), Shalimar (Superlac).

M&L for cutting & derooting of tree, shrubs on wall, ceiling, roof, adjacent to pipes, at corner etc upto three storey and rendering 15 mm thick in CM 1:3 upto 5 sqm and applying three coats of white wash or two coats of color wash over one coat of white wash to match the existing shade complete all as specified and directed.

Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:3 on fair faces of brick/concrete, chajja, facia, ceiling, roof projection, corner joints, cornices, wall in patches including necessary scaffolding upto three storey etc surfaces finished even and smooth without using extra cement including two coats of white wash complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick/concrete, surfaces in patches including necessary scaffolding upto three storey etc surfaces finished even and smooth without using extra cement including two coats of oil bound distemper complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete, surfaces in patches including necessary scaffolding upto three storey etc surfaces finished even and smooth without using extra cement including two coats of cement based paint complete all as specified and directed.

M&L for grinding polishing of existing kota stone upto mirror finish complete all as specified and directed.

M&L for writing letters or figure (Block roman itallic or Indian) 10cm high as in bldg No's complete all as specified and directed.

Preparation of surface of AC Sheet or plastered any description over 10cm width or girth and applying one coat of exterior emulsion paint of any color and shade complete all as specified and directed.

Supply and fixing GI tubing of 15mm bore medium grade including necessary fittings complete including taking down old pipe complete all as specified and directed.

Supply and fixing GI tubing of 20mm bore medium grade including necessary fittings complete including taking down old pipe complete all as specified and directed.

Taking out old 15 mm bore pipe complete all as specified and directed.

Taking out old 20 mm bore pipe complete all as specified and directed.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic ball screwed for iron pipe and fixed of 15 mm bore complete all as specified and directed.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic ball screwed for iron pipe and fixed of 20 mm bore complete all as specified and directed.

S&F in repairs Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete all as specified and as directed.

S&F in repairs Bib taps, fancy type chromium plated (long body) with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete all as specified and directed.

S&F in repairs Chromium plated Stop cock screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and directed.

S&F in repairs Stop cock, chromium plated fancy type screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and directed.

S&F in repairs Stop cock, chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore including cutting walls and making good surfaces complete all as specified and directed. Note : Including makig good of surface as existing including tiling, color wash, distempering, plastering etc.

S&F in repairs chromium plated angular stop cock, screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and directed.

S&F in repairs chromium plated Pillar taps, with capstan heads, chromium plated, screwed down high pressure, of size 15mm dia bore complete all as specified and as directed.

S&F in repairs Pillar mixer for wash hand basin, chromium plated, screwed down high pressure, of size 15mm dia complete all as specified and directed.

S&F in repairs Bip tap standard of PTMT any colour screwed for iron pipe and fixed of 15mm dia bore including necessary fittings complete all as specified and directed.

Supply and fixing in repair waste fittings chromium plated with long screwed shanks and fly nuts of size 32mm ISI Marked complete all as specified and directed.

Supply and fixing in repair waste fittings chromium plated with long screwed shanks and fly nuts of size 40mm ISI Marked complete all as specified and directed.

Supply and fixing in repair looking mirror with PVC moulded frame and hard board back white colour of size 450x600mm complete all as specified and directed.

Supply and fixing in repair PVC connection 15mm bore and for 450 mm long with brass or PVC nuts and PVC washer complete all as specified and directed.

Supply and fixing in repair PVC connection 15mm bore and for 600 mm long with brass or PVC nuts and PVC washer complete all as specified and directed.

Supply and fixing in repair PVC waste pipe 32mm bore complete all as specified and directed.

Supply and fixing in repair PVC waste pipe 40mm bore complete all as specified and directed.

M&L for cleaning of water storage tank of 500 litre capacity completely by removing all scale dirt/dust of any description with chlorene complete all as specified and as directed at site including taking down and refixing of tank at the same place, any damage will be rectified by the contractor at his own risk and cost.

M&L for cleaning of water storage tank of 1000 litre capacity completely by removing all scale dirt/dust of any description with chlorene complete, all as specified and as directed at site including taking down and refixing of tank at the same place, any damage will be rectified by the contractor at his own risk and cost.

S&F in repairs PVC seat cover for EWC, white colour including CP hinges complete all as specified and directed.

S&F in repairs CP jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and directed.

Supply and fixing in repairs PVC valve less syphon action type low level flushing cistern 8 to10 litres capacity with inlet, ball valve, float valve, push button type handle including telescopic flush pipe 32mm dia of stainless steel with long bend of 32mm dia complete all as specified and directed. Make : Parry ware (Slimline) / Hidustan Sanitaryware / Prayag)

S&F in repairs chromium plated Tubular towel rail, 20mm dia 'D' type 60cm long between flanges complete all as specified and directed.

S&F in repair chromium plated towel rack of size 600mm complete all as specified and directed.

S&F in repairs chromium plated shower rose with arm and not less than 125mm dia with or without swivel joints, including fixing to steel pipe complete all as specified and directed.

S&F in repairs chromium plated rain overhead shower with arm 300mm and size 200x200mm with or without swivel joints complete all as specified and directed.

S&F in repair 100mm dia steel grating with or without hole complete all as specified and directed.

S&F in repair 125 mm dia steel grating with or without hole complete all as specified and directed.

S&F in repair for PVC fibre bush stoppers for doors complete all as specified and directed.

Supply and fixing in repairs mild steel Helical door spring of size 300 mm at site including welding to steel chowkhats complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F in repair sheet glass ordinary quality and glazing with oil putty and pins in square n exc 0.5 sqm in each pane of thickness 3mm including hacking out complete all as specified and directed.

M&L for fixing the existing sheet glass ordinary quality and glazing with oil putty and pins of any size of thickness 3mm complete all as specified and directed.

S&F in repair sheet glass ordinary quality and glazing with oil putty and pins in square exc 0.5 sqm in each pane of thickness 3mm including hacking out complete all as specified and directed.

S&F in repair figured glass, pin head type and glazing with oil putty and pins in squares not exc 0.5 sq.m in each pane of thickness 3mm including hacking out complete all as specified and directed.

S&F in repairs PVC over head tank cover/Lid of size suitable for capacity of above 500 ltrs and upto 1000 ltrs capacity complete all as specified and directed.

M&L for replacing of GI fittings medium grade of 15mm bore pipe ISI marked like Elbow, socket, union, socket, tee, reducer, Tank nipple, Nipple etc complete all as specified and directed.

M&L for replacing of GI fittings medium grade of 20mm bore pipe ISI marked like Elbow, socket, union, socket, tee, reducer, Tank nipple, Nipple etc complete all as specified and directed.

S&F in repair of floor door spring including taking out shutter and refixing in the same complete all as specified and directed.

S&F in repair of hydraulic door closer including taking out shutter and refixing in the same complete all as specified and directed.

M&L for replacement of mild steel medium weight cold rolled butt hinges 100mm size complete all as specified and directed.

M&L for replacement of mild steel medium weight cold rolled butt hinges 75mm size complete all as specified and directed.

M&L for replacement of mild steel medium weight cold rolled butt hinges 50mm size complete all as specified and directed.

M&L for replacement of mild steel barrel tower bolt, stove enamelled black, with bright bolt 100mm long complete all as specified and directed.

M&L for replacement of mild steel barrel tower bolt, stove enamelled black, with bright bolt 150mm long complete all as specified and directed.

M&L for replacement of mild steel sliding bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, 250mm long complete all as specified and directed.

M&L for replacement of mild steel sliding bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, 300mm long complete all as specified and directed.

M&L for replacement of mild steel bow handles, 75mm size complete all as specified and directed.

M&L for replacement of mild steel bow handles, 100mm size complete all as specified and directed.

M&L for replacement of mild steel bow handles, 125mm size complete all as specified and directed.

M&L for replacement of Aluminium anodized, barrel tower bolt of extruded section, 100mm long complete all as specified and directed.

M&L for replacement of Aluminium anodized, barrel tower bolt of extruded section, 150mm long complete all as specified and directed.

M&L for replacement of Aluminium anodized, barrel tower bolt of extruded section, 200mm long complete all as specified and directed.

M&L for replacement of Aluminium handle, cast type, anodized, 100mm size complete all as specified and directed.

M&L for replacement of Aluminium handle, cast type, anodized, 150mm size complete all as specified and directed.

M&L for replacement of Aluminium alloy, anodized sliding door bolt with hasp, staple and fixing and sliding bolts of extruded section, 250mm long complete all as specified and directed.

M&L for replacement of Aluminium alloy, anodized sliding door bolt with hasp, staple and fixing and sliding bolts of extruded section, 300mm long complete all as specified and directed.

M&L for replacement of Butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, 75mm size complete all as specified and directed.

M&L for replacement of Butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, 100mm size complete all as specified and directed.

M&L for replacement of floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length of cover plate as 140mm complete all as specified and directed.

S&F in repair corner glass shelf of size 300 mm radius with stainless steel bracket complete all as specified and directed.

S&F in repair glass shelf of size 600mm long with stainless steel bracket complete all as specified and directed.

S&F in repair glass shelf of size 300mm radius (set of three) with stainless steel bracket complete all as specified and directed.

S&F in repair Cabinet mirror plastic body for toilet of size 450X600mm with 4mm thick looking mirror complete all as specified and as directed.

Supply and fixing in repair 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 no's GI tank nipple complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 no's GI tank nipple complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 19/20 mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination and other side balancing white including edge binding of same colour in all ends and fixed with screws to steel/ timber frame work including hinges as in cubboard shutters/ kitchen cabinet etc color approved by Engineer-in-Charge complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair Drapery curtain rod of metalic 20mm dia covered with PVC coating complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified as directed by Engineer-in-Charge.

S&F in repair sink with drainage board made of stainless steel 1mm thick in kitchen with plugs, washers and waste, including bedding in cement mortar on wall including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410 mm x330 mmx160 mm complete all as specified and as directed by Engineer-in-Charge.

S&F in repair sink with two no's bowl made of stainless steel 1mm thick in kitchen with plugs, washers and waste, including bedding in cement mortar on wall including fixing cantilever brackets and connecting union to pipe, bowl size 410 mm x330 mmx160 mm complete all as specified and as directed by Engineer-in-Charge.

S&F in repair health faucet with 1mtr long flexible pipe complete all as specified and as directed by Engineer-in-Charge.

S&F machine cut kota stone slab flooring 18 to 20 mm thick over 75 mm 1:2:4 PCC type B-1 (using 12.5mm graded crushed stone aggregate) and 20 mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete including dismantling of old stone floor and PCC complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Vitreous chinaware wash hand basin white, flat back of size 550x400 mm excluding tap but including brackets fixing to wall and two No's 10mm dia 100mm long nut and bolt over brackets and CP waste coupling complete all as specified and as directed by Engineer-in-Charge. Make: - Hindware(Ist Quality)/Parryware (Super fine)/Cera (Ist Quality)

S&F in repairs Vitreous China urinals, flat back size of 465x355x265 mm white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

M&L renewing tiles in patches, area n exc 5 sq. m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles and colour of new tiles match with existing tiles complete all as specified and directed by Engineer-in-Charge.

M&L cutting out decayed bricks from old walls and making good with new bricks in detached patches of not more than 0.30 cum bricks each patch complete all as specified and directed.

Supply and fixing in repairs stainless steel plate rack of size 75X75X25 cm made of 0.55 mm thick thick sheet complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone / boulder masonry, built in cement mortar complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6.00 mtr mean radius built in CM 1:6 complete all as specified and directed.

Description all as per serial item no. 103.00 here-in-before but except bricks complete all as specified and directed.

M&L Boulder pitching hand packed tightly and grouted with cement and sand mortar 1:6 complete all as specified and directed.

Dismantling wrought iron or MS work of any description not otherwise provided for complete all as specified and directed.

S&F MS struts or "V" shaped / "L" shaped brackets in security walls fixed with PCC bed blocks including drilling holes, notching for wire etc complete all as specified and directed.

Dismantling of RCC posts or struts any section, including taking out embedded portion and making good disturbed ground in concrete, brick work, masonry etc complete all as specified and directed.

Providing Reinforced cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc for fencing, average sectional area exceeding 100 Sq.cm and not exceeding 250 Sq cm, with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in mass concrete as in foundation for RCC posts and walls etc complete all as specified and directed.

M&L for RCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) in precast cover slab for drains or precast coping to compound wall etc including necessary forms and moulds etc and set cement mortar 1:6 and including demolition of old slab complete all as specified and directed.

M&L TMT bars of any dia cut to length, bent to shape required, including cranking, hooking for ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in reinforcement for RCC posts and for precast RCC slabs etc complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick or concrete surfaces built in CM (1:6), finished even and smooth without using extra cement as in compound walls and drains complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) jallies 25mm thick fixed in repairs set in CM (1:4) of any size complete all as specified and directed.

S&F Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs @75mm spacings and staining and fixing to any type of stranded rails straining bolts including securing or tying at crossings with and provn of galvanised mild steel wire, staples etc fixed in repairs or for new RCC posts complete all as specified and directed.

M&L 60 mm thick machine pressed pre cast concrete inter locking paver blocks (M-40 grade) any size and shape using grey cement and pigment confirming to IS-15658-2006 complete over 50mm sand cushioning over 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L preparing new plastered wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Preparation of new steel surface of any description applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Dismantling of fencing of any type and any description including post etc complete all as specified and directed.

S&F MS posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165.

S&F mild steel rag or lewis bolts 12 mm dia and nuts screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n exc 15cm complete all as specified and directed.

S&F MS round bars and MS flats for fixing of chain link fencing complete all as specified and directed.

S&F chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - All plumbing works shall be laid or fixed as to be completely air tight or water tight as specified and Contractor will furnish its certificates towards air / water tight before completion of work under the Contract. NOTE NO 4: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

M/S A TO Z ENGINEERS

N S MANHAS

Bidder Name

RAJINDER KUMAR AND CO

N S MANHAS

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

M/S A TO Z ENGINEERS