SPECIAL REPAIRS TO INTERNAL ROAD, ROAD FURNITURE AND ALLIED WORKS AT AFMC UNDER GE (CENTRAL) PUNE

Amount

Repairs to pot holes any depth n.exc 1 Sqm each including sweeping free from dust and mud water scoring sunken surfaces in roads, paths, etc. cutting round edges to at least 25 mm in depth and making good by filling in screened and graded road metal watering and well ramming (including supply of metal) and making good by applying tack coat @ 5 kg per 10 Sq.m (VG-10 grade), and providing bituminous premix asphaltic semi dense concrete (design mix ) ,30 mm thick (consolidated) thickness with 5.5 % binder content (VG-30 grade) by weight of total mix laid with mechanical paver rolled and compacted to reqired camber and gradient with 8 to 12 tonne power roller complete all as specified and directed by Engineer Incharge.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm, exc 50mm and n.exc 100mm deep complete all as specified and directed by Engineer Incharge.

M&L for premixed bituminious macadam with binder content @ 4% by weight of total mix (VG-30 grade) (Job mix) laid/ rolled with 8 to 12 tonne power roller and compacted to required gradient and camber (consolidated thickness 70mm or less as per site requirement of site) complete all as specified and directed by Engineer Incharge.

M&L for preparation of BM surfaces and applying evenly a tack coat of 2.5 kg/10 Sqm using Bituminous primer (VG-10 grade) over prepared BM surface complete all as specified and directed by Engineer Incharge.

M&L for preparing existing black top surface by wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the clean surface with mechanical compressure to remove all loose dust/dirt etc and applying evenly a priming/tack coat with bituminious primer @ 5 kg per 10 Sqm (VG-10 grade) on black top surface and providing bituminious premix asphaltic semi dense concrete (design mix) 30 mm thick (consolidated) thickness with 5.5% binder content (VG-30 grade) by weight of total mix laid with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and directed by Engineer Incharge.

M&L for preparation of black top or concrete surfaces of road and applying hot thermo plastic road marking paint 2.0 mm thick for marking lines dashes, arrows, letters etc on roads pavements with of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed by Engineer Incharge.

S&F for cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed by Engineer Incharge.

S&F retro reflective sign board of size 60cm x 90cm or 90cm x 60 cm (not exc 6 Sqft), rectangular or pentagonal shape, fixed both sides on board made out of aluminium composite panel (ACP) sheet 3mm thick fixed on SS-304 series hollow tubular section, 38 mm dia of 2 mm thcik. A 20 mm square tube of 1.25 mm thick of SS series 304( not exc 450 mm c/c) to be fixed on both ways to support the ACP boards. The board shall be sheated with high intensity retro reflective sheet of blue colour or any colour as approved by GE, computerised designed writting letter/ figures in (Block, Roman, Itlaic style or in Indian languages where required) / index hands (natural size) / arrows/ stops/ commas/ short lines/ dashes/ hypens bracket, holograms etc where necessary shall be made high intensity reflective sheet with in white colour letter, shape and sizes as required and approved by GE. The sigh board to be supported on 1 no post of 60 mm dia and 2.5 mm to 3.0 mm thick SS pipes of SS 304 series, exc 3 m and not exc 4 m in height with round moulded design cap on top. Pipes of the boards to be fixed in ground including excavation and earthwork in any strata, PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) in post holes of size 45 cm x 45 cm x 75 cm depth (post holes and concrete includes in the rates) complete all as specified and directed by Engineer Incharge.

S&F retro reflective sign board of size 120cm x 90cm or 90cm x 120 cm (not exc 12 Sqft), rectangular or pentagonal shape, fixed both sides on board made out of aluminium composite panel (ACP) sheet 3mm thick fixed on SS-304 series hollow tubular section, 38 mm dia of 2 mm thcik. A 20 mm square tube of 1.25 mm thick of SS series 304( not exc 600 mm c/c) to be fixed on both ways to support the ACP boards. The board shall be sheated with high intensity retro reflective sheet of blue colour or any colour as approved by GE, computerised designed writting letter/ figures in (Block, Roman, Itlaic style or in Indian languages where required) / index hands (natural size) / arrows/ stops/ commas/ short lines/ dashes/ hypens bracket, holograms etc where necessary shall be made high intensity reflective sheet with in white colour letter, shape and sizes as required and approved by GE. The sigh board to be supported on 2 nos post of 60 mm dia and 2.5 mm to 3.0 mm thick SS pipes of SS 304 series, exc 3 m and not exc 4 m in height with round moulded design cap on top. Pipes of the boards to be fixed in ground including excavation and earthwork in any strata, with PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) in post holes of size 45 cm x 45 cm x 75 cm depth (post holes and concrete includes in the rates) complete all as specified and directed by Engineer Incharge.

MOHANLAL MATHRANI CONS. PVT. LTD.

OM GANESH CONSTRUCTION