REPLACEMENT OF ELECTRIC WIRING, FITTINGS AND FIXTURES IN MD JCOs/OR ACCN IN SOUTH ZONE NEW CANTT UNDER GE SOUTH PATIALA.

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc complete all as specified and directed.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVC concealed conduit ( ISI Marked) of heavy duly with all accessories ie PVC gutties etc terminated in sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point includig cutting chasing and making good with CM 1:3 where required, complete all as specified and directed. in ceiling Portion surface conduit wiring to be done. Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.

All as per item No 2 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 2 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 2 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

M&L for Modular Socket 6A/16A - 2/3 pin combined 2 module type all as specified and directed.

M&L for Modular Socket, 6A - 2/3 pin combined 2 module type all as specified and directed.

M&L for Modular switch 1 way 6A, 1 module type all as specified and directed.

M&L for Modular switch 1 way 16A, 1 module type all as specified and directed.

Material and labour for Modular Bell push 6A 1 module complete all as specified and directed.

M & L for Fan step regulator, 120W -AC 230 Volt Modular type all as specified and directed.

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 6 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 4 Sqmm PVC copper conductor cable as in earth wire system , including taking out old wiring and cutting / chasing in wall and floor wherever required, complete all as specified and directed.

M&L for Sub main wiring in PVC concealed conduit with 2 Nos single core PVC insulated copper conductor cable flame proof size 4 sqmm multistrand and 2.5 sqmm PVC insulated flame proof earth wire using suitable size of copper thimble including taking out unserviceable sub main wiring all as directed.

Supply & fix in replacement of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 8 way double door type with 200 amp rated bus bar. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job, complete all as specified and directed.

Supply and fix in replacement of MCB SP up to 6-32 Amp all as specified and directed.

Supply and fix in replacement of MCB SPN 6-32 Amp complete all as specified and directed.

Supply & fix in replacement of existing unserviceable FTL with new techonlgy ultra bright led tubelight with aluminium heat sink & polycarbonate diffuser having high efficacy suited for installation in replacement of T5 tubelight with G5 lamp holders to give glare free light of capacity 18W 865 1148mm LED including neccessary electric conection with box type batten pre coated made up of CRCA body.

S&F in replacement Switch 15 Amp flush type, complete all as specified and directed.

S&F in replacement Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type, complete all as specified and directed.

S&F in replacement Switch piano flush type single pole one way 5/6 Amp , complete all as specified and directed.

S&F in replacement Socket outlet 2 in 1, 3 pin, 5A, complete all as specified and directed.

S & F in replacement of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet, complete all as specified and directed.

S&F in replacement Bell push Switch flush button single pole one way 5 Amps, complete all as specified and directed.

Supply & fix in replacement of existing unserviceable mirror light with Linear & compact 9W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt, Make as specified in Appx 'B', complete all as specified and directed.

Material and labour for in replacement angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 5 to 23 watts for batten fitting, including plastic square board of required size, complete all as specified and directed.

Supply and fix LED Lamp LED new Adore 7W E27 WW Ball Lamp 7 watt, all as per specified and directed.

Supply and fix LED Lamp LED new of capacity 9 W Ball Lamp

Material and labour for call bell ding dong AC 230 volt single pole complete all as specified and directed.

M&L in replacement of earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade protection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I, complete all as specified and directed.

S&F in replacement of choke electronic in plastic housing, single phase, 220 Volt, AC supply, 36/40 watt, complete all as specified & directed by Engr-in-Charge.

S&F in replacement of choke electronic e-saver, single phase, 220 volt, AC supply 28 watt, complete all as specified & directed Engr-in-Charge.

S&F in replacement of CFL Bulb 36 Watt 4 Pin type suitable for 2x36 recess mounting fitting all as specified and directed by Engr-in-Charge.

S&F in replacement of compact fluorescent lamp 11 watts suitable for light complete all as specified and directed.

Supply and fix in replacement of MCB TPN 63 Amp complete all as specified and directed.

S&F in replacement sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways (one incoming three phase & four out goings three phase) for MCCB, ISOLATOR & MCBs comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a) MCCB FOUR POLE 100 AMPS AC 415 VOLTS 10 KA = 01 NO as incoming Note :- (i)The DB shall be VTPN series of MDS-LOADLINE Type. (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost. (iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. (iv) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly.

Supply & lay in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade of crosssectional area 25 Sqmm 3 & 1/2 Core, including taking down existing unserviceable cable, complete all as specified & directed by Engr-in-Charge.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for laying of cables and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm as in soils complete all as specified and directed.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point as in soils complete all as specified and directed.

Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.

Supply and laying well burnt sub class ‘B’ bricks ( designated 75) locally available best quality laid dry in trenches for protection of underground cable all as specified and directed.

Supply and laying GI tube light grade of 40mm bore as in cable protection pipe including all fittings & taking down old unserviceable pipe from trench, pole, wall etc, complete all as specified and directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular stranded conductor size of 10 Sqmm, 2 core, including taking out unserviceable cable complete all as specified and directed.

Supply only capacitor of size 2.5 MFD for ceiling fan all as directed and specified.

Supply only capacitor of size 3.15 MFD for ceiling fan all as directed and specified.

Supply & fix in replacement of existing unserviceable flourescent tube rod with new techonlgy ultra bright led tubelight of capacity 18W LED with aluminium heat sink & polycarbonate diffuser having high efficiency suited for installation in existing 36/40 tubelight with G5 lamp holders to give glare free light, complete all as specified and directed.

S&F in replacement of existing unserviceable LED building light IP 66 powder coated pressure die cast aluminium compact high power LED fitting 25 watts with heat resistant toughned glass complete with all accessoreis watts complete including GI pipe bracket made out 40 mm dia GI pipe medium grade of 1.20 mtr long and make to shape fixing with 40x6mm size of flat iron clamp, nuts , bolts and washers connection including two coat of aluminium paint over a coat of primer and fixing the fitting on bracket and all the electrical connection, complete all as specified and directed.

Supply and replace existing unserviceable SPN enclosure with 2 pole and Earth Metal Plug & Socket for incorporating 10A / 20A SPN / DP MCB With Plastic Coverearth complete with one single pole MCB of 20 Amp complete all as specified and directed.

Taking down ceiling fan of any type and refixing on the location as directed after cleaning, oiling, overhauling, greasing, replacement of rubber bush, quarter pin etc. including connection with three core flexible PVC conductor cable of size 23/0.0076, complete all as specified and directed.

Supply and fix in replacement environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit led luminaire comprising of high brightness leds of capacity10 Watt complete all as specified and directed.

Supply and fix in replacement of existing unserviceable sheet metal enclosure for fixing of DB & electric meter factory made of size 50x50x18 cm made up of 2 mm thick MS Sheet with double door suitable locking arrange ment powder coating cutting chasing in wall and fixing and making good the disturbed surface shall be part of job at no extra cost, complete all as specifed and directed

Ashwani Kumar

M/s Amit Associates

FAVOURITE ENGINEERS

M/s GURFATEH BUILDERS

M/s Anil Kumar and co.

m/s panchmukhi builders