Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.2 LAccepted-AOC MAAN SAROVAR 96 SAI NAGAR GODHANI ROAD NAGPUR 440030 | NAGPUR | NAGPUR | MAHARASHTRA | 440030 | L1 | Accepted-AOC LOWEST TENDERER. | |
| 2 | L2₹20.7 L+₹1.5 L (7.66%)Rejected-AOC | L2 | Rejected-AOC NOT LOWEST TENDERER. | |
| 3 | L3₹27.4 L+₹8.2 L (42.6%)Rejected-AOC | L3 | Rejected-AOC NOT LOWEST TENDERER. |
Tender Value
₹19.4 L
EMD Value
₹20,000
Closing Date
27 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL SANDEEP BENIWAL, GE
OFFICE OF GARRISON ENGINEER AIR FORCE VAYUSENA NAGAR NAGPUR- 440007
ADDN ALTN TO BLDG NO. 811 AT VSN, NAGPUR
2023_MES_625385_1
8635
Open Tender
Civil Works
Item Rate
180 days
GE AF NAGPUR
As per tender documents
7 documents required · 7 mandatory
₹500
GE AF NAGPUR
₹20,000
14 Feb 2024
27 Oct 2023
4 Dec 2023
27 Oct 2023
27 Nov 2023
13 Nov 2023
Amount
Material and labour for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat ections) including distance pieces, cleats etc.confirming to Fe 410 -W (Gde E- 250) quality 'A' complete all as specified and as directed.
Material and labour for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.
Material and labour for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and ncluding either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe 410 -W (Gde?E- 250) quality 'A' complete all as specified and as directed.
Material and labour for preparing new steel and Iron surfaces of any description, over 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.
Supply and fixing of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and as directed.
Material and labour brick work with fly ash sub class bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) including demolition of existing brick work where ever required complete all as specified and as directed.
Material and labour for 10 mm thick rendering (internal) on fair faces of brick masonry or concrete surfaces of wall in CM (1:6), finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for 15mm thick rendering (external) on fair faces of brick masonry or concrete surfaces of wall in CM (1:4), finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for preparation of newly plastered surfaces of walls, and applying two coats of cement based paint over a coat of cement primer complete all as specified.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distempr over a coat of primer complete all as specified and s directed.
Supply and fixing pressed steel frames of size 165x60mm with hinges ,100mm size (3 Nos each chowkhat) with one or more rebates including necessary fixing lugs, lock strike plate, etc all as specified and as directed.
Material and labour for PCC (1:3:6) type C-1 for PS frame filling all as specified and as directed.
Supply and fixing 30mm thick flush door shutter solid core construction with block board case and plywood face panels, commercial type on both sides all as approved by GE complete all as specified and directed.
Supply and fixing aluminium alloy, anodised, sliding door bolt (250mm long) with hasp,nstaple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-uminium alloy and fixed complete all as specified and as directed
Supply and fixing floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed
Supply and fixing mild steel butt hinges medium weight size 100mm long complete all as specified and as directed
Supply and fixing aluminium handles cast type anodised size 150 mm long complete all as specified and as directed
Supply and fixing aluminium anodiesed barrel tower bolt of extruded section size 200 mm complete all as specified and as directed
Supply and fixing factory made uPVG white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all orners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steelFrame (30mm x 18mm) 2 nos, sliding sash 30mm x 18mm), sliding mesh sash (26mm x 10mm) profile tobe inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all ther connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each complete all as specified and as directed
Supply and fixing anodised aluminium grill (anodised transparent or dyed to requiredshade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the xisting window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard Section around the opening, all as specified and as directed.
Supply & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) (With Semi perforated 12mm thick micro tegular edged GRG false ceiling tiles) false ceiling tiles of Size 595 x 595 mm of approved texture,design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter?locking metal T-Grid of ot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main?T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm nd secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm ong, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L?shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of ength 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws complete all as specified and directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.
Material and labour non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over and including 15 mm screed bed in Cement Mortar (1:6) in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles all as specified and directed.
Material and labour Glazed Ceramic colour tiles in vertical surface of size 350x 250x 7 mm/ 450X 300X 7mm thick over and including Rendering 10mm thick CM 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour complete as specified and directed.
Material and labour for granite (of any type) work (table rubbed and polished) of 20mm thick in steps, jambs, pillars, window-cills, cooking platforms over Screed bed or bedding layer of mortar 15mm thick CM (1:4) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platform and like in cement in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite stone including grinding and polishing complete all as specified and directed.
Material and labour for machine cut cudappah stone slab 20-25mm thick over cement screed base 15 mm thick in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
Material and labour rounding to one edge of stone slabs edges, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
Supply and fixing PVC (SWR) pipes, 75 mm bore, single socketed, in any length, with rubber ring joints, fixed to floor/wall all as specified and directed.
Supply and fixing PVC (SWR) bends, 75 mm bore all as specified and directed.
S & F PVC (SWR) Tee 75 mm bore complete all as specified and as directed.
Supply and fixing in repairs Brass chromium plated bottle traps 40mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed all as specified and directed.
Supply and fixing in repair grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) all as specified and directed.
Material and labour for PVC (SWR) floor trap with grating 75 mm bore, including jointing to waste pipe with solvent cement including taking down of existing old trap all as specified and directed.
Supply and fixing high density polyethylene pipes (HDPE) of15mm bore diaof pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. including taking down old one all as specified and as directed.
All as per itemn No 36 above but 20mm bore dia.
Supply and fixing in repair cast iron nahani trap, with grating 100 mm dia including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed.
Supply and fixing in repair hand shower (health faucet) (ABS Body) with 8mm Dia, 1.5 meter long Spiro chrome flex tube & wall hook all as specified and as directed. Make ; Jaguar CODE-ALD 587 or equivalent in Hindware/ Parryware
Supply and fixing in repair pillar cock 15mm dia, Swan Neck Tap with left hand operating Knob with 450mm long braided hose complete all as specified and as directed. Make ;-Jaquar Code- CON-123BKN or equivalent in Hindware/ Parryware
Supply and fixing in repair 2-way Bib cock with wall flange, chromium plated, 15mm, complete all as specified and as directed. Make ;-Jaguar CODE-FUS-29041 or equivalent in Hindware/ Parryware
Supply and fixing in repair Bib Cock, Chromium plated, 15mm dia , complete all as specified and as directed. Make ;-Jaguar, code- CON-037KN quivalent in Hindware/ Parryware
Supply and fixing in repair stop cock, Chromium plated, 15mm, complete all as specified and as directed. Make ;-Jaguar, Code- FON-40053 quivalent in Hindware/ Parryware
Supply and fixing in repair Soap dish holder (CP Brass) complete all as specified and as directed. Make ;-Jaguar, code-AKP-35731P or equivalent in Hindware/ Parryware
Supply and fixing in repair towel rail, complete all as specified and as directed. Make -Jaguar, Code-AQN-7711or equivalent in Hindware/ Parryware
Supply and fixing in repair toilet paper holder with flap, Make-Jaguar, Code-AKP-35753PS or equivalent in Hindware/ Parryware
Supply and fixing in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old one complete all as specified and as directed
Supply and fixing in repair vitreous chain squatting pan, 'Orrissa pattern" size 630x450mm white with integral foot rests, including PVc ' P' or 'S' trap (excluding flushing cistern and flush pipe) complete bedding all as specified and directed.
Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern), white, including fixing of flush pipe, nut bolts, brackets etc complete all as specified and as directed.
Supply and fixing in repair plastic water closet seat cover, black/white, closed pattern with flat bottom, and cover and mild steel chromoium plated or aluminised hinging devices complete all as specified and as directed.
Supply and fixing in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed
Supply and fixing in repair vitreous china wash basin, white, flat back oval of size 550 x 400 mm including CI brackets, waste coupling ,brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve 450mm etc complete all as specified & as directed
Material and labour for preparation of existing treatment on wall surfaces filling of holes, cracks and uneven surfacs of wall with wall care putty or plaster of paris and applying one of oil bound distemper all as specified and as directed.
Material and labour for preparation of existing treatment on walls filling of whole, cracks with lime putty or plaster of paris and applying one coat of cement based paint, all as specified and directed. Note : The quoted rate shall deemed to be included cost of removal of vegitation, plants etc if any on the wall surfaces.
Material and labour for preparation of existing treatment on ceiling surfaces filling of holes, cracks and uneven surfacs of wall with wall care putty or plaster of paris and applying one coat of white wash all as specified and as directed.
E/M Portion
Material and labour for sub main wiring complete with two single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 6 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. Note: 3 run of 6 sqmm & one run of PVC conduit shall be measured as single unit
All as per item No 56 but 20 mm dia rigid non-metallic PVC conduit medium grade with two runs of 2.5 Sqmm and earth continiuty conductor of size 2.5 Sqmm all as specefied and directed. Note : 3 run of 2.5 sqmm & one run of PVC conduit shall be measured as single unit
Material and labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes ,switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. (a) One light point controlled by one switch
(b) One fan point controlled by one switch
(c) One switch socket outlet modular type 3 pin 6 amp on same board.
All as per item No 60 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board.
All as per item No 61 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.
Note for Item No. 56 to 62 :- The disturbed surfaces of wall for concealing box/wiring shall be making good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The qouted rate for point wiring shall deemed to be include the cost of making good.
Taking down old unserviceable and Supply and fixingnew master led tube 4ft 20 W LED Tube Polycarbonate type having nominal system lumen output of 2000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 40,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) complete all as specified and as directed. Make : CG Cat Part No. LT8-20-865-(2) or equivalent in Bajaj/Wipro/Philips.
Taking down old unserviceable and Supply and fixingnew decorative box type fitting with blue coloured end caps pre wired for LED tube energy of 20 Watt . Make : CG Cat Part No. DMLN1LT8-16 or equivalent in Bajaj/Wipro/Philips.
Supply and fixing 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 230 volts, 100 Watts humfree single pole, all as specified and as directed. Make : Legrand Cat No. 675531 or equivalent in L& T/ Havells/ Seimens
Supply and fixing switch modular type, single pole one way 6 Amps, 230 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501 or equivalent in L& T/ Havells/ Seimens
Supply and fixing socket modular type 6 Amps 3 pin 2 module 230 volts all as specified and as directed. Make : Legrand Cat No. 675551 or equivalent in L& T/ Havells/ Seimens
Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed.
Supply and fixingsocket modular type 16 Amps, 3 pin combine, 2 module,230 volts all as specified and as directed. Make : Legrand Cat No. 675555 or equivalent in L& T/ Havells/ Seimens
Supply and fixingswitch modular type 16 Amps,one way with indicator, 1 module,230 volts all as specified and as directed. Make : Legrand Cat No. 675513 or equivalent in L& T/ Havells/ Seimens
Supply and fixingsheet metal enclosures for SPN DB's with metal double door for incorporating MCBs, IP-43, 8 way with 200 amps rated busbar, 230 volts, as per IS-8623 all as specified and as directed. Make : Legrand Cat No 507611 or equivalent in L& T/ Havells/ Seimens
Supply and fixingMCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 230 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc all as specified and as directed. Make : Legrand Cat No. 408617 or equivalent in L& T/ Havells/ Seimens
Supply and fixing MCB SP 10-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 230 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc all as specified and as directed.
Supply and fixing energy saving ceiling fan 1200 mm sweep single phase, 230 V, 50 Hz with double ball bearing in opal white colour and BEE 5 star rated BLDC complete including down rod of suitable length with clamp as required in ground, provision of 3 core copper wire of size 1.5 sqmm connected from ceiling rose to fan and marking MES No in black paint complete all as specified and as directed.
M/s Ashwin Bhange
Rehal Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .