Provn of black top road 1.5 km x 5.5 m under GE Kapurthala.

Amount

Surface excavtion not exceeding 30 cm deep and averaging 15 cm deep in soft/loose soil and getting out complete all as specified and directed.

Rolling and consolidating road formation surfaces in cutting with 8 to 12 tonne capacity power road roller, watering as necessary including filling in hollows and depressions and consolidating to the required level, gradient and camber complete all as specified and directed.

Soling (or sub base), 150mm thick with broken boulders or quarried stone (sand stone or quartzite) including filling of interstices, surface formed and rolled and consolidated to required gradient and camber with power road roller of 8 to 12 tonne capacity complete all as specified and directed.

Material & Labour for water bound macadam 150mm thick (compacted thickness) in two layers of 75 mm thick each with crushed stone aggregates of grading 2 (63 to 40 mm size) granite laid, spread and rolled with 8 to 12 tonne power road roller and consolidating to required camber and gradient complete all as specified and directed.

Material & Labour for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and applying evenly a priming/tack coat with paving bitumen VG-10 at the rate of 10 Kg per 10 Sqm of road surface, laying, rolling, consolidating 40 mm thick (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5.5% binder content (VG-30) by weight of total mix laid with mechanical paver roller and compacted to required camber and gradient and rolled with pressure roller and 8 to 10 tonne power road roller to achieve a uniform smooth surface with Pneumatic vibratory roller complete all as specified and directed. Note: Mix shall be prepared in Hot mix plant as per job mix formula obtained from authorised testing lab and laying will be done by mechanical paver.

Material & Labour for providing and marking broken centre line /side lines / Zebra lines, dashes, arrows etc. on road pavement and the like of any description and width with thermoplastic paint hot applied with machine conforming to BS-3265 and according to the specification laid down by IRC and MOST (Ministry of Surface Transport) specification 2001 (4th revision) complete all as specified and directed. Make of paint :- 3M/VERTEX/JCC

Material & Labour for Continuous brick edging with width equal to the width of brick of whole sub class 'B' laid dry on end vertically to sides of roads, including necessary excavation, embedding bricks in the ground to depth as required, tempering around bricks and removing surplus spoil to a distance not exceeding 50m complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in soft/loose soil complete all as specified and directed.

Returning filling in layers including leveling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.

Material & Labour for reinforced concrete 600mm dia pipes class NP-3 laid & jointed with collars complete all as specified and as directed.

Material & labour for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete etc complete all as specified and directed.

Material & labour for PCC (1:2:4) type B-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete etc complete all as specified and directed.

Material & labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:4) complete all as specified and directed.

Material & labour for 15mm thick cement plaster in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified

Material & Labour for preparation of new concrete/ plastered surfaces over 10cm width or girth and applying two coats of white wash complete all as specified and as directed.

Removing surplus spoil to a distance not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.

Dismantling bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for forming embankment including raising (or lowering) earth, spreading in layers n. exc 30 cm thick each layer, watering and rolling with 8 to 10 tonne power roller and finishing the surface to required gradient and camber complete all as specified and directed. Note: Soil obtained from Srl item No. 1 & 8 and removed under Srl item No. 16 shall be used in this item and the unit rates shall be deemed to be included this aspect.

Supply & fix in repair road stud two way reflective of size 100mm x 110mm x 20 mm made up of plastic body and available in colour red, amber, white etc complete all as specified and directed. Make : Dark Eye Cat Part No. DA-52 or equivalent of 3M/Shakti.

Supply & fix in repair solar road stud high polymer of size 125mm x 125mm x 25 mm made from aluminium alloy, solar powered by nionocrystal solar panel, one high capacity Ni-Cd rechargeable battery, view distance approx 1000 mtrs, LEDs-010mm, 3 pieces each side and total 6 pieces are used for high brightness of different colours, battery back up upto 12 hours of continuous lighting at night , available in colour red,amber,green complete all as specified and directed by Enginner-in Charge. Make : Dark Eye Cat Part No. DA-110 (DHRUV) or equivalent of 3M/Shakti

Supply and fix 100mm bore GI water tubing medium grade laid under road/floor complete all as specified and directed. Make: JINDAL, TATA, OSWAL,VPL

J.K & Company

M/s Sahib and Company

DUGGAL CONSTRUCTION CO