COMPREHENSIVE REPAIR AND MAINT OF BLOCK NO P-187 (G plus 10) OUTSIDE FORT WILLIAM UNDER GE (FW) KOLKATA

Amount

(B/R PORTION) Dismantling of floor hearth, wall tiling incl cement mortar bedding( but not backing) removing of serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for 40mm thick PCC 1:2:4 type B-1(using 20mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L joint free coloured tiles 7-8mm thick area of each tiles exc 0.11 sqm but n.exc0.18sqm (400X400X7-8mm),as in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bedding in CM 1:6.complete all as specified and directed.

M&L coloured glazed ceramic tiles in vertical surfaces 450X300X7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Taking down PVC door shutter with PVC chow Kats including all fittings area exc 1.00 Sqm but next 2.00 Sqm all as directed.

S&F Factory made solid PVC door frame (chow hat) of size 50mmx47mm made out of 5mm plain color wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, S&F in opening as per specification & drg as per manufacturer instrutions.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

M&L in repair 18/19mm thick pre-laminated particle board as in cup board shutter double leaf one side decorative of sheds and other side balancing white lamination. All edgs properly sealed with 5mm thick 2nd class hard beading fixed with water resistant adhesive except rebate side which shall be of 25mm thick as in repair complete all as directed.

S&F 20mm dia fancy type Harrison rails (Curtain rod) mild steel, chromium plated including fixing brackets, stops, rollers et fixed on wall sample as approved by GE complete all as directed.

S&F in repair drawer knobs 40 mm dia of brass polished fixed with nut screw and washer all as directed.

M&L in repair for 300mm MS ordinary helical springs including roller and roller plate complete all as directed.

M&L in repair19 to 20 mm thick black/coloured granite machine cut laid over 10mm thick screed bed in cm 1:4 and jointed with grey or coloured cement to match with admixture of pigment to match the shade of granite including cutting polishing complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.

M&L 15 mm thick cement plaster on brick or concrete walls finishing fair and even in CM 1:6 complete all as specified and as directed

M&L 15 mm thick cement plaster on brick or concrete walls finishing fair and even in CM 1:4 complete all as specified and as directed

M&L 10 mm thick cement plaster on ceiling surfaces without using extra cement finishing fair and even in CM 1:4 including necessary scaffolding complete all as directed.

M&L Preparing new plastering Surfaces of Wall and applying two Coats of oil bound distemper complete all as specified and as directed.

M&L Preparing new plaster surfaces of ceiling and applying two Coat of oil bound distemper complete all as specified and as directed.

Material & Labour preparing new plaster surfaces for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

M&L Preparing old decorated Plaster Surfaces of Wall washing, rubbing down and stopping of distempered and painted surfaces of wall as and applying one Coat of oil bound distemper complete all as specified and as directed.

M&L Preparing old decorated plaster surfaces of ceiling and applying One Coat of oil bound distemper complete all as specified and as directed.

Material & Labour complete removal of old surface of walls applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over all as specified and directed.

M&L Preparing old Painted Steel Surfaces over 10 Cm width or girth not otherwise described and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L Preparing old Wooden Surfaces of any description not otherwise described over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

S&F in repair Chromium plated brass Pillar tap fixed to wash hand basin, etc. complete all as specified and as directed. Make : Make : Ess Ess Cat No.RO-101 or equivalent make specified in tender.

S&F in repair Chromium plated brass Bib cock with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. Make : Ess Ess Cat No - RO-103 or equivalent make specified in tender.

S&F in repair Chromium plated brass two way Bib cock with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. Make : Ess Ess 203 or equivalent make specified in tender.

S&F in repair 75mm dia brass chromium plated shower rose with or without swivel joints for fixing with 15mm bore pipe etc complete all as directed. Ess Ess Cat No OH202

S&F in repair central hole 15 mm Wall mixer cast copper alloy brass chromium plated screwed down for iron pipes etc complete incl taking down old one all as directed (Make: Jaguar/Essco Cat No - C211A). Or equivalent

S&F in repair Stop cock 15mm bore cast copper alloy chromium plated fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed (Make: Ess DLX 513AKN/513BKN or equivalent make specified in tender.

S&F in repair 15mm bore angular stop cock chromium plated cast copper alloy with wall flange concealed type screwed for iron pipe etc complete all as specified and directed (Make: Essco DLX 526KN or equivalent make specified in tender.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. (Make:Jaguar cat no.ALD-573/Ess Ess Cat No C-232X or equivalent make specified in tender.

S&F in repair brass CP tubular Towel rail 600mm long and 20mm dia with chromium plated brass screws and wooden/plastic cleats complete all as directed. Make: Essco Cat No AEC-1111 or equivalent make specified in tender.

S&F in repair kitchen sink with draining board made of stainless steel 1mm thick with plug, washer, waste pipe including bedding in cement mortar to wall or including fixing cantilever bracket and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. Make: Prayag Cat No 1239D or equivalent make specified in tender.

Repair to CP brass item of Bib tap, Stop cock, Pillar tap, angular cock, shower rose, hand shower, health faucet etc of 15mm size including replacement of washer/spindle if required in day to day maintenance complete all as specified and directed.

S&F in repair CP grating 100mm size fixed with white cement complete all as directed. Prayag Cat No FP-62 or equivalent make specified in tender.

S&F in repair acrylic bathroom cabinet box with mirror of size 18''x15" size complete all as specified and directed. Make :Prayag Cat No 555 or equivalent make specified in tender.

S&F in repair PVC connection 450mm long fixed with 15mm GI pipe complete all as specified and directed.

All as per Ser Item No 41 but 600mm long.

S&F in repair PVC waste pipe 32mm dia for WHB/kitchen sink fixed complete all as specified and directed.

S&F in repair Plastic seat cover in white or any colour of EWC with flat bottom incl hanging device complete all as specified and directed.

S&F in repair 32 mm bore CP bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms) connected to pipe complete all as specified and directed Make: Ess Co Cat No ALE-773AL190X125 or equivalent make specified in tender.

Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets complete all as specified and directed.

Repair only to flushing cistern incl cleaning and replacement of washer and syphonage of suitable size if required complete all as specified and directed.

Taking up or down steel water tubing 15 mm bore incl connection , cleaning etc complete all as specified and directed.

All as per Ser Item No 48 but 20 mm bore

All as per Ser Item No 48 but 25mm bore.

S&F tubes 15mm bore medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

All as per Ser Item No 51 but 20mm bore.

All as per Ser Item No 51 but 25mm bore.

Refixing old steel tubing 15mm bore and connection in new or old position(wall, ceiling, floor etc.).

All as per Ser Item No 54 but 20mm bore.

All as per Ser Item No 54 but 25mm bore.

S&F in repair 32mm CP waste cupling for WHB complete all as specified and directed.

S&F in repair CP waste coupling for stainless steel sink complete all as specified and directed.

S&F in repair 40mm bore GI long screw 150mm long fixed with service tank complete all as directed.

All as per Ser Item No 59 here-in before but 25mm.

All as per Ser Item No 59 here-in before but 20mm.

Repair/refixing of WHB with new brackets fixed on wall complete all as specified and directed.

S&F in repairs vitreous china (white) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental/ CERA, Model: Conventional / HINDWARE, Model: SLICK or equivalent make specified in tender.

Supply and Fix in repairs vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0117 / HINDWARE, Cat No. 20004 / JAQUAR, Cat No. CNS-WHT-OP01 / CERA, Model: COVY /SOMANY, Model: SIGNATURE or equivalent make specified in tender.

S&F in repair Wash basins, Vitreous China (flat back or angle back type) of size 630 x 450mm, including cutting for and pinning in ends of brackets or erecting stand, brackets but exclusive of waste pipe etc complete all as spd and as directed.Make : Parryware, Model : C0406 or equivalent make specified in tender.

S&F 40mm dia PVC pipe with bend complete fixed on walls, ceilings and floors incl GI/PVC clamps, bends sockets etc incl taking down U/S old PVC pipes complete all as specified and directed.

S&F in repair 20mm dia of gate valve crutch or butterfly handle fixed with GI tubing complete all as specified and directed.

All as per item No 67 here in before but 25mm dia of bore

All as per item No 67 here in before but 40mm dia of bore

M&L for small repair of hinges for door and window, adjustable for sliding door bolts, tower bolts, repair of handles, mortice locks etc for similar type of works complete all as specified and directed. (rate incl welding where ever reqd

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 Sqm each all as directed.

S&F for 2nd class HW, plain, solid, straight chowkats and frams, wrought, framed, rebated on the solid, moulded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S&F 30mm thick 2nd class hard wood glazed & skeleton shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.20(a) complete all as directed.

S&F Factory made 35mm thick with 2nd class hard wood, rail and style factory made plain framed panelled shutter with lock, rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS:1003(Part-I) kiln seasoned and chemically pressure treated.

Taking down shutters of any description including easing and adjusting and also refixing builders hardware as required for any description of door, window and ventilators etc and refixing in same opening complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as directed.

All as per Ser Item No 77 but fixed in repair.

Hacking out old broken glass (any thickness and size or quality) from metal frames glazed with putty or fixed with beads .

S&F 4mm thick ordinary quality sheet glass/frosted glass and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section.

S&F 300mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as directed complete all as directed.

All as per Ser Item No 82 but fixed in repair.

S&F 100mm butt hinges stainless steel medium weight

S&F aluminium handle, cast type anodised 125mm size all as directed.

All as per Ser Item No 85 but 150mm.

Preparing new surface of wood or wood based material of any description and in any position not otherwise described n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

Taking down steel window/ventilators of any size including grill/guard bars and removing to store complete all as directed.

S&F in repair powder coated anodised aluminium doors frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F aluminium anodised powder coated for doors, windows, ventilators and partition with one or more rebate (Minimum thickness of powder coating 50 micron) and Three track with 1.80 mm thick channel section and shutter frame thickness 1.65 mm without sash bars, Aluminium section weighing 0.55 kg/mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. Complete all as specified and directed. Note:- 1.Size of window shall be as per site requirement. 2. Glass & wire cloth shall be measured separately.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineering-charge.

Taking down plants and vegetation from walls upto roof level by means of cutting Holes in Brick Walls, built in Cement Mortar of 150mm depth making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required n exc 150 sq.cm in superficial area, complete all as specified and as directed.

M&L for cleaning of inaccessible areas of roof including parapet walls upto 0.50 metre height, removal of vegetation growth, including uprooting, if required and repair to broken/chipped off plastered surfaces with cement mortar 1:4, mixed with water proofing compound @ 3% by weight of cement, finished fair and even including necessary ladder/scaffolding complete all as specified and directed. (NOTE: Water Proofing Compound shall be measured and paid separately).

M& L for water proof film coating (elastic and breathable),in two layers (as per manufacturers instructions) ,for patch repair of damp and repaired wall over old or new plastered surfaces of walls including preparation of surfaces complete all as specified and directed.( Make:- Dr Fixit, Sureseal or equivalent product in other makes of chemical/ paint Specified in tender).

M&L for cleaning of outer surfaces of down take pipes, any type, treating minor leakages at joints, clearing of vegetation, scraping of algae growth with wire brush, chipping of damaged plaster at the joints (area not exc 0.50 sqm) and making good with cement mortar 1:4 duly mixed with water proofing compound @ 3% by weight of cement and applying one coat of tartaric acid on dry finished plaster surface including necessary ladder/scaffolding complete all as specified and directed.

Providing and fixing double steel scaffolding system (cup lock type) on the exterior side of shaft portion (only) of building of any height including additional rows of scaffolding in stepped manner as per requirement of site, made with minimum 40mm dia M.S. Tube, placed 1.5 metre centre to centre (maximum), horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. Tube challis, M.S. Clamps and staircase system in the scaffolding for working platform etc and maintaining it in a serviceable condition for execution of work and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of GE. Notes:- (1) The elevational area of shaft portion of building (length/breadth of shaft X height of shaft) covered with scaffolding shall only be measured for payment purpose. (2) The payment shall be made for one time only for execution of all items of each face of shaft portion of building. (3) After completion of work all scaffolding materials shall be removed from building /structure by the contractor and the same shall be the property of the contractor and accordingly rate shall be quoted.

S& F for panelling by using factory finished custom designed cold form light gauge steel frame work of (AZ-150) gm aluminium zinc alloy coated steel having minimum yield strength 300-550 MPA) conforming to AISI Specifications & IBC 2009 for cold formed steel framing & construction also as per IS 875-1987 ISQ 800-1984 & ISO:801-1975 on which 8 mm thick art stone boards is fixed on top of 6 mm thick fibre cement board to the frame work using 35 mm fully threaded self embedding screws. the boards should be finished to have uniform gap/ grooves, complete all as specified and directed.( Make:- Everest or Equivalent/model as approved by GE).

S& F 6 mm thick solid polycarbonate sheet as in roofing/ wall cladding fixed self taping screws, complete all as specified & directed.

(E/M PORTION) Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sunken type box etc. and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge.

Material and labour for point wiring for the followings with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and capping/ Conduit including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth continuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick including making good all disturbed surfaces to match the existing complete all as specified and directed as below :-

One light/fan point controlled by one, one way switch.

One bell point controlled by one push button switch.

One 3 Pin 5 Amps socket out let point on independent board.

One 3 Pin 5 Amps socket out let point on same board alongwith other suitable switches.

All as per item above here-in-before but using 2.5 sqmm PVC FRLSH insulated copper conductor wire for connecting 15A socket on independent board complete all as specified/directed.

Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, one way complete all as specified/directed.

Supply and fixing of bell push piano flush type one way 240 Volts 5 Amps all as specified/directed.

Supply and fixing of switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) complete all as specified/ directed.

Supply & fixing of socket outlet 2 in 1,3 pin 5 Amps 240 Volts flush type (non shuttered) complete all as specified / directed.

Supply and fixing of switch socket out let combination multipurpose 3 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified/directed.

Supply and fixing of bell electric, 240 Volts, single pole complete all as specified and directed.

Supply & fixing of ceiling fan regulator electronic, Deluxe, rotary, step type, 120/280 volts as specified/directed.

Supply and fixing of Bulb holder angular PVC/Polycarbonate suitable for batten fittings complete all as specified/directed.

Supply and fixing of ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified/directed.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make Havells Cat No LUMILINE + BS20WLED840SPCSS or equivalent make specified in tender.

Supply and fixing LED lights fitting 1x 10 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make Havells Cat No LUMILINE + BS10WLED840SPCSS or equivalent make specified in tender.

S & F in Replacement for fittings with twin core PVC insulated and overall PVC sheathed cable with stranded aluminium conductor 1100 volts grade of size 4 sqmm including taking down old unserviceable wiring complete all as specified and directed.

Supply and fixing in repair of switch piano flush type 240 Volts 5 Amps, SP, one way, fix in repair including taking down old unsv complete all as specified/directed.

Supply and fixing in repair of bell push piano flush type one way 240 Volts 5 Amps, fix in repair including taking down old unsv complete all as specified/directed.

Supply and fixing in repair of switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) ,fix in repair including taking down old unsv complete all as specified/ directed.

Supply & fixing in repair of socket outlet 2 in 1,3 pin 5 Amps 240 Volts flush type (non shuttered),fix in repair including taking down old unsv complete all as specified and directed.

Supply and fixing in repair of switch socket out let combination multipurpose 3 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered), fix in repair including taking down old unsv complete all as specified and directed.

Supply & fixing in repair of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet including taking down old unsv complete all as specified and directed.

Supply and fixing in repair of bell electric, 240 Volts, single pole, fix in repair including taking down old unsv complete all as specified and directed.

Supply and fixing in repair of Bulb holder angular PVC/ Polycarbonate suitable for batten fittings, fix in repair including taking down old unsv complete all as specified and directed.

S&F Fan step regulator, 120W - 2 module complete all as specified and directed.

S&F Fan capacitors 2.5 mfd complete all as specified and directed.

Supply and fixing in repair of MCB SPN DB 8 way double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08 complete incl taking down old unsv complete all as specified and directed.

Supply and fixing in repair of MCB SPN DB 4 way double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08 incl taking down old unsv complete all as specified and directed.

Supply & fixing in repair of MCB TPN 63 Amps 'B' Series 10 KA 415 volts incl taking down old unsv complete all as specified and directed.

Supply & fixing in repair of MCB SPN 40 Amps 'B' Series 10 KA 240 volts incl taking down old unsv complete all as specified and directed.

Supply & fixing in repair of MCB SP 6-32 Amps 'B' Series 10 KA, 240 volts incl taking down old unsv complete all as specified and directed.

Supply and fixing in repair of single Pole & Neutral enclosure with 2 pin and earth plug & socket for incorporating with single pole 20 Amp SP MCB all as complete including taking down old unsv one complete all as specified and directed.

Supply and fixing in repair of AC short circuit protection motor starter 25 Amps capacity, 230 Volt with MCB DP 25 Amps, plug top & socket complete 6 M including taking down old unsv complete all as specified and directed.

Supply and fixing in repair LED lights fitting 1x 20 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make Havells Cat No LUMILINE + BS20WLED840SPCSS or equivalent make specified in tender.

Supply and fixing in repair LED lights fitting 1x 10 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make Havells Cat No LUMILINE + BS10WLED840SPCSS or equivalent make specified in tender.

S&F in repair LED bulb of 09 W complete. Make bajaj/Magic complete all as specified and directed.

Supply and fixed in repair PVC terminal Rectangular boxes of suitable size with 3 mm thick PVC /plastic laminated sheet, top cover suitable sizes of brass screws and washers etc. for mounting switches, sockets, regulators etc of size 100mmx100mmx50mm deep depends on the no of switch and socket complete all as specified and directed.

Material & labour for Sub main wiring with two runs of single core 4 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn through and including PVC casing capping of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi slandered copper conductor of size 4 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.

Material & labour for Sub main wiring with two runs of single core 4 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn IN EXISTING CONDUIT and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi slandered copper conductor of size 4 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

MARUTI ENTERPRISES (BID ID -3145345)

UNIVERSAL TRADING CENTRE (BID ID -3143773)

ARJUN DAS VALECHA (BID ID -3145927)

P N GUPTA AND SONS (BID ID -3144328)

DEB AND COMPANY (BID ID -3143633)

EAST COAST STANDARD PRODUCTS (BID ID -3142313)

MUKHERJEE ENTERPRISE (BID ID -3144929)