Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹74.7 LAccepted-AOC SHOP NO 14 VIRAL APARTMENT OPP SHOPPERS STOP S V ROAD ANDHERI W MUMBAI 400 058 | MUMBAI SUBURBAN | MAHARASHTRA | 400058 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹78.2 L+₹3.5 L (4.63%)Rejected-Finance ROOM NO 608 BLDG NO 06 R B T CO OP HSG SOC NEW CHIKUWADI MANKHURD W MUMBAI 400043 | MUMBAI SUBURBAN | MAHARASHTRA | 400043 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹83.9 L+₹9.1 L (12.2%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹86.0 L+₹11.2 L (15.0%)Rejected-Finance MUMBAI 400074 ACHARYA COOMERCIAL SHOPPING CENTRE 119 1ST FLOOR ACHARYA COMMERCIAL AND SHOPPING CENTRE DR C G ROAD NEAR BASANT CINEMA CHEMBUR MUMBAI 400074 DR C G ROAD | MUMBAI SUBURBAN | MAHARASHTRA | 400074 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹90.0 L+₹15.2 L (20.4%)Rejected-Finance MUMBAI THANE MAHARASHTRA | L5 | Rejected-Finance Being L5 |
| Sl No | Description | Qty | Unit | Bharat Construction Company (Bombay) L1 | ANUBHAV ENGINEERING COMPANY L4 | B.L. WAGHMARE BABA & CO L2 | Bucon Engineers and Infrastructure Pvt Ltd L3 | RESHMA CONSTRUCTION L5 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Earth work excavation by mechanical means (Hydraulic excavator) / manual means at 0.00 to 1.50 m depth from Average Ground Level in all types of soil other than soft and hard rock, dressing the sides of foundation, ramming of bottom etc. including shoring and dewatering (if necessary) and refilling with selected excavated earth in layers of not more than 500 mm thick, each layer well rammed and consolidated including disposing the surplus earth within a distance of 200 m all as per specifications including clearing Jungle, uprooting of vegetation, grass, etc. complete and as directed by the Engineer-in-charge | 900 | CuM | 450 ₹4,05,000 | 300 ₹2,70,000 | 300 ₹2,70,000 | 125 ₹1,12,500 Lowest | 450 ₹4,05,000 |
| 2.00 | Earth work excavation by mechanical means (Hydraulic excavator) / manual means at 1.50 to 3.00 m depth from average ground level in all types of soil other than soft and hard rock, dressing the sides of foundation, ramming of bottom etc. including shoring and dewatering (if necessary) and refilling with selected excavated earth in layers of not more than 500 mm thick, each layer well rammed and consolidated including disposing the surplus earth within a distance of 200 m all as per specifications including clearing Jungle, uprooting of vegetation, grass, etc. complete and as directed by the Engineer-in-charge | 850 | CuM | 504 ₹4,28,400 | 325 ₹2,76,250 | 300 ₹2,55,000 | 213 ₹1,81,050 Lowest | 500 ₹4,25,000 |
| 3.00 | Lead charges for Soil lead exceeding 2 KM but not exceeding 3 KM, by mechanical transport including loading, unloading, stacking / levelling etc. | 1,600 | CuM | 207 ₹3,31,200 | 450 ₹7,20,000 | 100 ₹1,60,000 Lowest | 150 ₹2,40,000 | 400 ₹6,40,000 |
| 4.00 | Earth work excavation in foundation in Hard Rock by Chiselling and / or by mechanical means (Hydraulic excavator) / Manual means including dewatering if necessary, dressing the sides, ramming the bottom, and stacking and / or disposing within a distance of 200 m and filling the sides of foundation with available selected excavated earth in layers not exceeding 500 mm in depth, each layer well rammed and consolidated etc.complete all as per specifications and as directed by the Engineer-in-Charge.
From 0.00 to 1.50 m depth from Average Ground Level | 50 | CuM | 1,593 ₹79,650 | 500 ₹25,000 Lowest | 900 ₹45,000 | 600 ₹30,000 | 525 ₹26,250 |
| 5.00 | Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge | 500 | SqM | 405 ₹2,02,500 Lowest | 450 ₹2,25,000 | 600 ₹3,00,000 | 800 ₹4,00,000 | 550 ₹2,75,000 |
| 6.00 | Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm)/ M-10 grade with minimum cement content 220 Kg/m3 including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering complete at all levels | 60 | CuM | 7,452 ₹4,47,120 | 7,300 ₹4,38,000 | 7,500 ₹4,50,000 | 6,200 ₹3,72,000 Lowest | 7,000 ₹4,20,000 |
| 7.00 | Providing , centering ,shuttering Form work for Sub Structure using PVC film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge | 1,400 | SqM | 396 ₹5,54,400 | 550 ₹7,70,000 | 400 ₹5,60,000 | 300 ₹4,20,000 Lowest | 550 ₹7,70,000 |
| 8.00 | Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level.
Note: i) In view of limit on water-cement ratio for durability requirements, concrete admixtures (Naphthalene / Melamine based superplasticizers) can be used after taking prior approval of Engineer-in-Charge and the rates quoted for these items shall be inclusive of the cost of admixtures, trial mixes, testing (at site & at approved labs), etc. complete.
ii) All projections, fins etc. in the concrete surface formed at the joints in the formwork should be ground & flush and finished at no extra cost.
iii) Minimum cement content per cum of concrete is as mentioned below :
For OPC:Using River sand-400Kg,Using Manufactured Sand-425Kg
For PPC:Using River sand-440Kg,Using Manufactured Sand-465Kg | 300 | CuM | 7,749 ₹23,24,700 Lowest | 9,800 ₹29,40,000 | 10,000 ₹30,00,000 | 7,800 ₹23,40,000 | 9,000 ₹27,00,000 |
| 9.00 | Extra for PCC/ RCC Using Ready Mix Concrete from outside project area including transporting and pumping from approved batching plants . | 360 | CuM | 540 ₹1,94,400 | 100 ₹36,000 Lowest | 500 ₹1,80,000 | 5,500 ₹19,80,000 | 800 ₹2,88,000 |
| 10.00 | Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings.
Steel supplied by the contractor.
Using TMT bars of Fe-500D grade of all sizes .TMT bars to be supplied by the contractor shall conform to IS – 1786 (Latest edition) and BARC specification
Note:
1) The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also testing third party from approved laboratories without any extra cost.
2) Binding wire required for the work will have to be supplied by the contractor at their own cost and will not be measured for payment.
3) Cover blocks shall be of same grade of concrete. | 25 | MT | 81,000 ₹20,25,000 | 90,000 ₹22,50,000 | 75,000 ₹18,75,000 Lowest | 75,000 ₹18,75,000 Lowest | 95,000 ₹23,75,000 |
Tender Value
₹85.3 L
EMD Value
₹2.0 L
Closing Date
17 Apr 2025, 3:00 pmClosed
Chief Engineer
Civil Engineering Division, BARC, Trombay, Mumbai
Extension of RCC Drain No36 from outside REDS road to security fence of BARC at South site BARC Trombay, Mumbai
2025_BARC_853589_1
BARC/CED/ET/69/2024-2025 Dated 10/03/2025
Open Tender
Civil Works
Item Rate
365 days
South site, BARC, Trombay, Mumbai
Please refer Tender Document
8 documents required · 8 mandatory
₹0
₹2.0 L
4 Sept 2025
18 Mar 2025
23 Apr 2025
18 Mar 2025
17 Apr 2025
25 Mar 2025
18 Mar 2025 - 24 Mar 2025
Amount
Lead charges for Soil lead exceeding 2 KM but not exceeding 3 KM, by mechanical transport including loading, unloading, stacking / levelling etc.
Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge
Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm)/ M-10 grade with minimum cement content 220 Kg/m3 including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering complete at all levels
Providing , centering ,shuttering Form work for Sub Structure using PVC film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge
Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level. Note: i) In view of limit on water-cement ratio for durability requirements, concrete admixtures (Naphthalene / Melamine based superplasticizers) can be used after taking prior approval of Engineer-in-Charge and the rates quoted for these items shall be inclusive of the cost of admixtures, trial mixes, testing (at site & at approved labs), etc. complete. ii) All projections, fins etc. in the concrete surface formed at the joints in the formwork should be ground & flush and finished at no extra cost. iii) Minimum cement content per cum of concrete is as mentioned below : For OPC:Using River sand-400Kg,Using Manufactured Sand-425Kg For PPC:Using River sand-440Kg,Using Manufactured Sand-465Kg
Extra for PCC/ RCC Using Ready Mix Concrete from outside project area including transporting and pumping from approved batching plants .
Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractor. Using TMT bars of Fe-500D grade of all sizes .TMT bars to be supplied by the contractor shall conform to IS – 1786 (Latest edition) and BARC specification Note: 1) The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also testing third party from approved laboratories without any extra cost. 2) Binding wire required for the work will have to be supplied by the contractor at their own cost and will not be measured for payment. 3) Cover blocks shall be of same grade of concrete.
Providing and Fixing 16 mm diameter 150 mm Long Anchor Fastner of approved make including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings.
Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge Up to and including 300 mm Joists, 350 mm channels, and below sections using materials of approved manufacturers. (ISI marked) All test reports to be provided along with the supply of the materials conforming to IS:2062
Providing Structural steel work in M.S Plain Plates and Chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Using materials of approved manufacturers. All test reports to be provided along with the supply of the materials conforming to IS:2062 Notes for Item No. 12 and 13 : 1. The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also third party testing from approved laboratories with out any extra cost. 2. Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates. 3. Welding Electrodes from approved manufactrers meetinf all the technical specifications (the electrode gives smooth radiographic quality weld with low spatter and smoke) grade only shall be used. 4. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted. 5. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc.
B.L. WAGHMARE BABA & CO (BID ID -3196791)
Bucon Engineers and Infrastructure Pvt Ltd (BID ID -3202428)
ANUBHAV ENGINEERING COMPANY (BID ID -3203301)
RESHMA CONSTRUCTION (BID ID -3195230)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .