COMPREHENSIVE REPAIR MAINT OF OTM MD ACCN LOCATED IN ZONE H AREA OF AGE BR II UNDER GE EAST LUCKNOW

Amount

Dismantling floor, hearth wall tiling etc including cement mortar bedding (but not backing)/ cement plaster including rubbish off the premises complete all as specified and directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc laid over 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for glazed ceramic coloured tiles of size 600x300x7mm thick/450X 350X 7mm thick over 10mm thick plaster in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and drected

M&L for Vitrified ceramic coloured tiles light shade 10 mm thick (Square/Rectangular) polished area of each tiles n exc 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Description all as per item no 4 above but on skirting with 10 mm height rendering in CM 1:4 complete all as specified and directed

M&L for 18-20 mm thick Mirror polised machine cut kota stone slab flooring over 20 mm thick screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing. complete all as specified and directed

Demolition of cement Concrete in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in floor sub base comoplete all as specified and directed

Demolition of reinforcement cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M & L for precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) set in cement mortar 1:6 as in cover in drain, manhole cover, plateform etc complete all as specified and directed Note- Reinforcement shall be paid separately .

M&L for TMT bars 6 to 8 mm dia for reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-415 or Fe-500 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc complete all as specified and directed

Dismantling of asbestos cement (corrugated or semi corrugated etc) sheet in roof covering including ridge complete all as specified and directed

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L- type or J- type or cranked hook bolts complete all as specified and directed

M&L for Asbestos cement one piece plain angular ridge 6mm thick fixed with L- type or J- type or cranked hook bolts complete all as specified and directed

S&F Pre - painted galvalume aluminum zink coating GI based corrugated steel sheeting 0.50 mm thick of an color having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F rolled mild steel section as in main and cross beam, hip and jack rafters; purline where connected to common rafter and running rail and guides for sliding door;fixed with angle cleat or other connecting plates complete all as specified and directed. grade Fe410N Gde E-250.

Dismantling of old ceiling boards any type and any thickness including cover fillets/ aluminum snap grid complete all as specified and directed

M&L for false ceiling with 4 mm thick E-board white prelaminated set embossed reinforced designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600 x 600 mm having 24 mm wide T- section, runner made of 0.33 mm GI sheet and angle made of 0.45 mm GI sheet, suspended with 2 mm dia GI wire including two coat of oil bound distemper complete all as specified and directed

S&F in repair 4 mm thick E-board tiles of size 600 x 600 mm (without grid work) in ceiling fixed with screw or as per manufacturer instruction complete all as specified and directed.

M & L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, filling all the nail holes etc and prepairing surface with plaster of paris etc and applying one coat of white wash on walls mixed with adequate qty of fevicol complete all as specified and directed.

Description all as per Item No 22.00 above but on ceiling.complete all as specified and directed.

All as per description of serial item no. 22.00 above but applying applying two coat of white wash on wall surfaces.complete all as specified and directed.

M & L for preparation of old decorated surface of walls, cornices, pilasters etc by washing rubbing down and stopping old distempered and painted surfaces and applying one coat of oil bound distemper on walls, cornice, pilasters etc complete all as specified and directed.

All as per description of serial item No. 25 above but applying two coats coat of oil bound distemper (OBD) on wall surfaces.complete all as specified and directed.

M&L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, and applying one coat of cement base paint on walls tinted or white complete all as specified and directed

M&L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, and applying two coat of cement base paint on walls tinted or white complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of primer over Birla white wall care putty after complete removal of existing treatment on old plastered surface including necessary preparation complete all as specified and directed.

M&L for providing and applying plaster of paris putty of 2 mm thickness over plastered surface of wall to prepare the surface even and smooth complete all as specified and directed.

M&L for preparation of old decorated plastered surface of walls, and applying one coat of weather proof exterior emulsion paint of approved shade/tint on walls complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Description all as per item No 32 here-in before but on steel surfaces and ---- complete all as specified and directed.

M&L for obliterating old writing of any description, not exc 0.1 sqm with paint to match existing works, complete all as specified and directed. by Engr-In-Charge.

M & L for writing letter or figured (Block, Roman, Italic or Indian) over base coat n exc 30 cm height with synthetic enamel paint complete all as specified and directed.

M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism ) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed.

M&L for waterproof cement based putty @ 1 Kg (undiluted ) per Sqm of average thickness 1 mm over the plastered / old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism ) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps :- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 Kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI complete all as specified and directed.

M&L for one coat of acrylic water based exterior grade primer @ 0.9 Ltr (undiluted )/10 Sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 Ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & colour stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram / litre as per the LEEDS specifications, anti fungal properties in two coats @ 1.79 Ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 Ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. Note for item No 17 to 19 above (a) The work pertaining to periodical services & water proofing shall be executed from authorised applicator through manufacturer of which the materials i.e Paint, Distemper, Cement base paint, putty etc is proposed to be used by the contractor and approved by Garrison Engineer.

Taking down cement plaster on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc but lime plaster any description complete all as specified and directed

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed

M & L for brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed.

M & L for brick work with fly ash bricks, straight or curved on plan exc 6M mean radius in half brick thick wall, old size brick built in cement mortar 1:4 complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM1:6,finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick on other than fair faces of brick work in CM1:6,finished even and smooth without using extra cement complete all as specified and directed

M&L for Rendering 10mm thick on concrete surfaces of ceiling in CM 1:4 complete all as specified and directed

M & L for two coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

M & L for three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of primer on walls including preparation of new plastered surface complete all as specified and directed.

M&L preparation of newly plastered wall surfaces and applying two coats of cement base paint complete all as specified and directed.

Taking Down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking downChowkats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description n exc 1.00 sqm each complete all as directed

Taking down shutters of any description exc 1.00 sqm but not exc 2.00 Sqm each complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed

M&L for PCC 1:3:6 type C-2 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed

S&F hold fasts; supports or stays for rainwater, knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed

S&F 30mm thick flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed

S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed

M&L second class hardwood glazed and skeleton window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.upplied and fitted to chowkats.complete all as specified and directed.

S & F factory made PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F 100 mm size butt hinges, medium weight, stainless steel, and fixed complete all as specified and directed.

S&F 250 mm long Aluminum alloy, anodised sliding door bolts, plate type, ,and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminum alloy complete all as specified and directed

S&F in repair including taking down by welding or unscrewing of 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified & directed (Fixed with screw or welding as required)

S&F 200 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

Description all as per item No 66 above but 150 mm size complete all as specified and directed.

S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

Description all as per item No 68 above but 125 mm size complete all as specified and directed.

S&F MS work for chimney bars, bearing bars, window guard bars, plain, let in and fixed independently in wooden frames, and similar articles including making holes in chowkats or welding in iron frame etc guard bars of independent or framed complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads (exc 1.5 sqm) complete all as specified and directed

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complet all as specified and directed

S&F 3 mm thick Sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F in repair including taking down from rivet, Nut & Bolt /welding / wooden beading stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples/wooden beading/ necessary welding complete all as specified and directed

S&f in repair 140 mm floor door stopper of aluminium alloy body and tongue,anodised with hard drawn steel spring complete all as specified and directed

S & F in repair 0.56 mm Plain Aluminium sheeting alloy 31000H4 in straight flashing of WC/bath door complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer on steel surfaces including preparation of surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces including preparation of surfaces complete all as specified and directed.

Taking down of existing hinges by welding or screw and S&F 100 mm size stainless steel butt hinges, medium weight, fixed with screw or welding complete all as specified and directed by Enginner-in-Charge

M & L for welding in repair exc 2.5 cm but not exc 5 cm in lengrh thickness of metal to be welded not exceed 6 mm complete all as specified and directed.

S&F of rubber beading n exc 10 cm wide as in doors complete all as specified and directed

S&F aluminium anodized door with frame of size 100X44.5X 1.5mm, stile, middle and top rails of size 82X44.5X1.5mm thick and bottom rail of size 114X44.5X1.5mm thick including 5.5mm thick tinted glass panes with all fittings/ fixtures such as cleats, tower bolt, hinges, locking arrangement, pull and push handle of aluminium anodized, hydraulic door closer etc., complete including aluminium and rubber beading complete all as specified and directed.

S & F Aluminum glazed window with 3.8 mm thick plain / tinted glass consisting of frame of size 63.5 x 44 and shutter sections weighing not less than 0.55 kg/m with locking arrangement as approved fixed including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 Nos). hinges type B-21, 100mm long (2 Nos) suitable handle (1 Nos), tower bolt 150 mm long (02 Nos) including powder coated aluminum grills of aperture 75 mm and fixed in frame of window with stainless steel wiremesh including necessary fixing arrangement complete all as specified and directed

S & F aluminum Window sliding type three track with glazed and gauzed shutter (incl stainless steel wire cloth 0.36 mm nominal dia and 1.40 mm apreture and 3.8 mm thick plain glass) on wheel consisting frame of size 100 x 44 (sliding shutter consist of suitable size of section as specified and directed) with locking arrangement as approved fixed with rubber gas ket and aluminum beading etc including necessary cutting hole in wall fixed complete all as specified and directed.

S&F in repair aluminum Anodised grills of aperature 75 mm and fixed in frame of window and ventilator including necessary fixing arrangement etc complete all as directed

Dismantling of wooden boarding, any description, fixed in any position complete all as specified and directed

S &F aluminium anodised partition wall with 5.50mm thick glass and/or 12mm thick prelaminated particle board exterior grade decorated both side and 38mmx63mm size anodised aluminium section frame work fixed with aluminium and rubber beading and fixing arrangement for fixing the framework to wall/floor and frame to frame complete all as specified and directed

S&F in repair 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, as in book shelves etc fixed with SS screws to steel frame work complete all as specified and directed

S&F in repair kitchen PVC cabinet in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18mm thick pvc sheet & provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets 5.5screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finishincl all necessary fitting as per site requitment as per make and specification mentioned as per drawing and complete all as specified and directed. by Engineer-in-charge on site.

M&L for in repair block board, 18/19mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work complete all as specified and directed.

M&L for 0.90mm thick decorative laminates 'Mica type 1 of surface finished,colour and pattern as approved, fixed with adhesive as per makers instructions complete all as specified and directed.

M&L for magnet ball catcher for cup board shutters.complete all as specified and directed.

S&F continuous piano hinges, mild steel bright finished or electro galvanized with width of flap 30mm when open complete all as specified and directed.

Taking down and refixing in same opening of aluminum door shutter of area exc 1.00 sqm but n exc 2.00 sqm including necessary repair with replacement of rubber beading, and other small articles such as cleats, hinges, screws etc complete all as specified and directed

S&F in repair Double action floor spring hydraulically regulated made up of aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed

S&F in repairs Aluminum (Die cast body) hydraulic door closer regulated designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width complete all as specified and directed.

S&F 2000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one complete all as specified and directed

S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one complete all as specified and directed

S&F, 500 Ltr capacity Rotational moulded polyethylene water storage tanks ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one complete all as specified and directed.

S&F in repair 20 mm dia brass gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls/ ceilings/ concealed or laid in floors including taking up or down existing steel tubing and connections all as specified and directed

S&F 20 mm Tubes medium grade galvanised with all fitting and fixed complete to walls/ ceiling / concealed or laid in floors including taking up or down existing steel tubing and connections complete all as specified and directed

S&F in repair vitreous China wash hand basin white size 550 x 400mm including brackets complete all as specified and directed.

S&F in repair vitreous China, table top, wash hand basin of size 600 mm x 435 mm x 180 mm, fancy type including 32 mm dia waste coupling and waste pipe complete all as specified and directed

S & F in repair vitreous china pedestal pan EWC (Couple Closet Bowl) of size 370 x 640 x 760 mm including UF seat cover, hinges, S trap-220 mm, including accessories set etc and vitreous china ware flushing cistern of complete al as specified and directed.

S&F in repair of aluminium anodised six peg hanger of extraded section & fixed in positions of size 300 mm long as approved by GE complete all as specified and directed.

S&F in repair 15mm dia spindle for bib taps,angle valve and pillar taps as required as per ground and directed by Engr in charge complete all as specified.(Including taking down existing spindle carefully and fixed the same in position) complete all as specified and directed.

S & F in repair 15 mm bore dia of pipe pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed

S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed ( 32mm) complete all as specified and directed.

S&F in repair 32 mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S & F in repair 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed.

S & F 32 mm bore Low density polyethylene pipes for urinal etc complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern, including P or S trap and connection to drain (or outgoing pipe) and pvc seat cover excluding flushing cistern and flush pipe complete all as specified and directed

S&F in repair vitreous china white urinals half stall type complete including providing and fixing plugs, screw, 32 mm dia flush pipe, waste fittings, spreader, grating, unions for discharge pipe etc (excluding flushing cistern) complete all as specified and directed.

S&F in repair Vitreous china sqatting pan, Orissa pattern, size 580 x 440 mm white , with integral foot rests (excluding flushing cistern and flush pipe ) complete all as specified and directed

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of capacity 10 litre ISI marked complete all as specified and directed.

S & F in repair sinks with drainage board made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S & F in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle sc-rewed down screwed for iron pipe or for brass ferrule and fixed (15mm bore dia of pipe ) complete all as specified and directed.

S&F in repair Cast iron bib taps 15 mm bore with crutch or butterfly handle,screwed down, screwed for iron pipe or ferule complete all as specified and directed.

S & F in repair 15 mm bore Stop valves (angle type) cast copper alloy chrominum plated fancy type screwed down high pre-ssure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Description all as per item no 124 above but concealed type for shower complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed

S & F, in repair 15mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.

S & F, in repair 20 mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.

S & F, in repair 25 mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grat-ing including joint-ing with solvent cement ( Diameter of outlet 75mm) complete all as specified and directed.

S&F in repair CP grating doom 100 mm dia chromium plated complete all as specified and directed.

M&L in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repair Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

S&F in repairs 75mm Bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repairs 110 mm Bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S & F in repair 75mm Bore PVC (SWR) bends any radius complete all as specified and directed.

S & F in repair 110mm Bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair plastic water closet seat cover white, closed pattern with flat bottom & cover and aluminum anodised hinging device complete all as specified and directed.

S&F in repair drapery rods, coloured, standard quality, PVC coated not less than 25mm dia with heads at both ends and middle support/brackets, rings etc. complete all as specified and directed.

S&F in repair cast copper alloy health faucet chromium plated with 1.00 Mtr long flexible tube incl wall hook complete all as specified and directed

S&F in repair CP brass jet spray with hand hold arrangement including 1.5 m long flexible pipe with hook of superior quality complete all as specified and directed

S&F, glass corner self assembly, fancy type, made of 6 to 7mm thick toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and directed.

S & F in repairs CP brass center hole wash hand basin mixer for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed.

S & F in repairs CP brass wall mixer with telephonic shower for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed.

S&F PVC waste pipe of standard quality suitable for 32 mm bore waste coupling for WHB/ urinal complete all as specified and directed.

S&F Solid PVC wall panelling consisting 5 mm thick any colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed.

M&L 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as specification and drawing complete all as specified and directed.

M/S RAJ INTERIORS (BID ID -3142761)

M/s Sachkhand Traders (BID ID -3142827)

RKT ENGINEER & SONS (BID ID -3143293)

QUALITY CONSTRUCTIONS CO (BID ID -3143193)

M/s Durga Construction Company (BID ID -3143242)

Sanjay Singh & Company (BID ID -3142093)

Powertronix (BID ID -3142918)

ANIL CONSTRUCTION (BID ID -3143405)

Supreme Builders (BID ID -3143019)

M/s Chandra Mohan and Sons (BID ID -3142693)

m/s raghubar dayal (BID ID -3143224)