NIT NO GE/ND-32/2023-24 REPAIR /MAINTENANCE OF WATER SUPPLY DESTRIBUTION LINES, PUMP SETS, FOUNTAIN AND CLEANING OF SUMP/TANK ALONGWITH CONNECTED WORKS AT KASHMIR HOUSE AND REPAIR/MAINT OF DG SETs, SECURITY LIGHTS, LT UG CABLES AND LT FEEDER PANEL

Amount

Taking up or down old Galvanised iron or steel water tubings of following bores with all fittings from trenches/, walls/pillars,/floors /ceiling and separating serviceable tubings and set for aside reuse and removing unserviceable tubings from site all complete as specified and as directed :

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Bore of tubings 15 mm

Supply and laying only Steel water tubings, galvanised, medium grade with all fittings, laid in trenches in old/new position, fixed complete to walls, ceiling, post or laid in floors etc with providing necessary fixing clamps, saddles etc as required in new/old positions complete as specified and as directed of following bore of size :-

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Bore of tubings 15 mm

S&F gate valve,of following size gun metal, heavy duty screwed on both ends with iron wheel head after taking down old existing gate valve complete all as specified and directed at site.

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Bore of tubings 15 mm

M & L for repair, servicing/periodical maintanence to RO Plant of capacity 50 LPH including replacement of minor spares, Pump repair, refixing the plant after repair, testing complete all as specified and directed of entire satisfactory level by Engr-in charge. Note: (i) Charcole and other minor accessoris included in the quoted rate (ii)Spares required shall be measured and paid under relevant items. (iii) Contractor is instructed to attend the complaint with in the three hours after lodging the complaint,Delay in attending complaints will be charged @ 500 Rs every next day

S & F in replacement Membrane for 50 LPH RO Plant

S & F in replacement activated carbonFilter heavy Grade for 50 LPH RO Plant

S & F in replacement Electrical accessories Solenoid valve for 50 LPH RO Plant

Supply & fix in replacement HDPE pipe 3/8"dia suitable for inlet & outlet of RO plant all as specified

S & F in replacement of booster pump for 50 LPH RO Plant

Material and labour for carryout Physical check (one mechanic and one helper) of centrifugal/submersible pump of any size & capacity, cleaning of burnt/ damage accessories if required, cleaning complete with cleaning material (Petrol/ CRC-226), tightening of all nuts, bolts all as directed and checaking leakage sepage and serviceabilty of pipe line /gate valve and minor consumables like Petrol, CRC, Brasso etc for cleaning shall be included in the quoted rate and nececessary fitting all as directed and specified Note :-(i) Gate Valves, Foot valve ,pipe line shall be measured and paid separately. (ii) Minor parts l, GI nuts, bolts, etc and cleaning meterials jointing materials shall be included in quoted rates.

Material and labour for attending the breakdown in case if pipe line burst out with all accessories including machine to dig the pipe /moisture detecting machine and find out the faulty location of pipe.complaint must be attended at the same day. Note :-(i) Gate Valves, Foot valve ,pipe line shall be measured and paid separately. (ii) Minor parts l, GI nuts, bolts, etc and cleaning meterials jointing materials shall be included in quoted rates. (iii) maintainig the surface as per existing stadard is contractor resposibility which include laying the removed tile ,refilling the excavated material .(iv) Moisture detecting machine will be reqd at site throughout the duration of contract.(v) Contractor is instructed to attend the complaint with in the three hours after lodging the complaint,Delay in attending complaints will be charged @ 500 Rs every next day

S&F in replacement Non return valve heavy duty of the following size /dia ISI marked including flange joints and minor consumables like Petrol, CRC, Brasso etc for cleaning shall be included in the quoted rate of following sizes

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Bore of tubings 15 mm

servicng of Dosing pump of capacity 1250 ltr cap hooper ,motor driven .5 hp ,1440 rpm 415 v dosing rate 25 lph including leakage check.winding of motor ,greasing ,replacement of ss fastner,pvc pipes and other connecting accessories complete all as specified and directed .Note : dosing pump must be functional always so servicng and overhauling of the pump is essential and keeping it funtional 24x7 is contractor responsibilty .delay in the services will be fined 600 Rs per day

S & F in replacement TE 1000-AVR CONCRETE BREAKer ,Versatile breaker for demolishing or chiselling floors and occasional wall applications (with universal power cord) Working direction: Floor, Wall Tool chuck type: TE-S ,Weight according to EPTA Procedure 01/2003: 12.5 kg .Note : required for digging floor during a fault in under ground water supply pipe line

M&L for Cleaning of RCC under ground Sump of capacity upto 20,000 ltrs by cleaning walls and floors of tank by wire brushing and gunny bags, etc removing all scales, dust, pit dirt and mud, removing outside and carryout two coats of white wash on external exposed concrete/ plastered surface and inside surfaces all as specifiec and directed by Engineer-incharge.

M&L for taking away the sludge of the RCC tank by vehicle to keep the surrounding clean and hygenic .Note : permission of labour and vehicle to enetr the Kashmir house is solely contractor's respomsibility as it is an restricted area the cleaning must be done on staurday sunday only (holiday)

Supply & fixed in repairs Ball valve, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball, screwed for the following size as specified and as directed :-

For 25 mm bore GI pipe.

For 20 mm bore GI pipe.

M & L in replacement PVC Flat sheathed with plain copper conductor 3 core submersible cable of 6.0 SQ mm including taking down old U/S material complete all as specified and directed.

s & F in replacement Manual ratchet pipe threader of size 1/2″-1″ inches for manual threading of MS & GI pipe. The threading Sets includes Die Heads and Ratchet Assembly, Ratchet Handle Because all threading sets equipment compatible 12-R Dies in die head so doing work with pipe threader easy to work Standard equipment including: carrying case standard alloy dies ,Machinable thread Wide processing range from 1/2" to 2" Each set contains up to 6 die heads Body material: cast steel Packed in plastic suitcase, easy to carry ,Number of Memory Sticks -‎1 Item Weight ‎12 kg Product Dimensions ‎26 x 50 x 18 cm; 12 Kilograms Item model number ‎SM-R50 Item Height ‎18 Centimeters Item Width ‎50 Centimeters

M & L in replacement of Star delta starter 7.5 HP in steel sheet enclosure type starter suitable for 5/7.5 HP pumpset comple(motor rating 415 Volts 50 Hz, 3 Phase) including taking down old U/S material complete all as specified and directed

M&L for Re-winding of electric motor of capacity 5/7.5 HP with copper super enamelled winding wire of same gauge with class H Insulation after taking out burnt winding from stator and cleaning slots etc, varnishing, drying reassembling,testing complete all as specified and directed by Engr in charge

S&F in replacement of galvanised steel tubes heavy grade of size 40 mm bore both side duly welded flange in a standard length of three metre or any length as in borewell vertically installed including nuts, bolts, washers & packing complete all as specified.

M&L for lifting of submersible pump along with lowering column pipes with flanges by disconnecting nut bolts and opening motor from pump. Complete all as specified and as directed.

M&L for lowering of submersible pump along with lowering column pipes with flanges by fixing nut bolts of suitable size and assembling motor and pump. Complete all as specified and as directed.

M & L in replacemnt pump unit only of a monoblock pump suitable for 7.5 HP motor 3 phase 415 v,50hz made of CI,MS,SS head range 28-44 ,discharge 10.3-4.7 size (suc x del) 65x65 mm power 5.5 kw protection IP 55 complete all as specified and directed .Note testing certifcate must be submited after intallation ,installation of new unit and taking out the old unit is the responsibility of contractor only.

M&L for Re-winding of electric motor for submersible pump of capacity 3 HP with copper super enamelled winding wire of same gauge with class H Insulation,water sealed after taking out burnt winding from stator and cleaning slots etc, varnishing, drying reassembling,testing complete all as specified and directed by Engr in charge

M&L for Development of Existing tube well with compressed air and after that cleaning of water with 25% extra capacity submersible pump by pumping muddy water.

Testing of tube well water from recognised laboratory for potability of water for drinking/other purposes. Checking of PH value ,TDS value,content of iron and other harmfull metals complete all as specified .

Supply and fixing of Monkey menace protection device with pvc spikes and connected accessories nut bolt size as per sample all as specified and directed

Supply only in replacement shocket to connect GI pipe of the following sizes

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Supply only in replacemnt union for GI pipe of the folowing sizes

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Supply only in replacemnt nipple for GI pipe of the following sizes

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Supply only in replacement reducer socket for Gi pipe of the following sizes

Bore of tubings 50/40 mm

Bore of tubings 40/25 mm

Bore of tubings 25/20mm

Bore of tubings 40/20 mm

Bore of tubing 20/15 mm

Supply only in replacement GI plug of the following sizes

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Supply only in replacement T socket for Gi pipe of the following sizes

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Supply only in replacement elbow for GI pipe of the following sizes

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Servicng /overhauling /rewinding of fountain pump 3 Hp includes cleaning of all nozzels with a chemical to remove the junk and smooth flow of water ,replacing minor accessories bush,nut bolts,suction pipes cleaning the surrounding of the fountain-base complete all as specified and directed (after eveery 3 months)

M & l for painting motor pump /dosing pump and putting the danger board at the pump house gate made of iron srewed to the gate by nut bolts /screw pench complet all as specified and directed

Supply and laying in replacement XLPE LT cable 1100 volts grade heavy duty with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC Tape armoured with galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS-7098 (Part-I) with latest amendments laid in tranches/fixed to wall/pole/laid in floor including necessary connections and suitable size of thimbling and minor consumables spares like thimbles, bakelite board etc for connection shall be included taking out old unserviceable LT UG cable in the quoted rate complete all as specified and as directed by Engineer-in-Charge of following sizes :- (Note : Excavation , earth work, sand cushioning , brick protection and pipe shall be measured and paid separately under appropriate item of this schedule)

16 Sqmm 4 core.

25 sqmm 4 core

35 Sqmm 3.5 core.

50 sqmm 3.5 core

70 Sqmm 3.5 core.

120 sqmm 3.5 core

150 sqmm 3.5 core

185 sqmm 3.5 core

240 sqmm 3.5 core

Supplying and fixing in replacement 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC sheathed in service connections one twin core cable flat or circular of size 10 sqmm.

Supplying and fixing in replacement 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC sheathed in service connections one twin core cable flat or circular of size 6 sqmm.

Supply only in replacement of MCCB TP/TPN pole 415 volt of capacity 200 Amps breaking capacity not less than 25 KA

Supply only in replacement of MCCB TP/TPN pole 415 volt of capacity 400 Amps breaking capacity not less than 35/36 KA

Supply only in replacement of MCCB TP/TPN pole 415 volt of capacity 250 Amps breaking capacity not less than 35/36 KA

M& L for shifting of LT panel board/LT feeder pillar box from low line side to as required level minimum 1.2 Mtr hight including taking down existing LT cable of any size,refixing as same condition incomming and out goining cables and grouting of LT panel, provn of PCC foundation all as directed by Engr-in-Charge.

Supply and fix in replacement indicator lamp in diffrent colour code LED/Neon type(as per sample) complete (RYB) including repair to wiring with copper conductor cable of existing suitable size all as specified

Supply and fix saddle for Electrical cablemounting metal,strong corrosion condition resistance,easy installations of sizes 6cmX4.5cmX2.5cm

Supply and fix Electrical cable lugs aluminium,strong corrosion condition resistance,easy installations of sizes 16 Sqmm to 50 sqmm all as directed.

S & F Cable jointing kit for 1100 volt complete with jointing material andaccessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 35 sqmm all as directed.

S & F Cable jointing kit for 1100 volt complete with jointing material andaccessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 50 to 95 sqmm all as directed.

S & F Cable jointing kit for 1100 volt complete with jointing material andaccessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 120 t0 185 sqmm all as directed.

Supply and install in replacement ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 125 Amps.

Supply and install in replacement ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 200 Amps.

Servicing and preventive maintenance of DG set 125 KVA of make Mahindra & Mahindra by taking out U/S spares, Cleaning by brushing to remove dust including cleaning of filter,Checking of all nuts, bolts tightening whereever necessary, check up engine oil level, coolant level and Labour for top up if necessary, adjustment belt tension,Tuning of engine, adjustment of speed, alternator voltage, frequency etc greasing oiling and checking For smooth functioning of DG Set. Note :- 1. Any spares,Engine oil,coolant,unserviceable spares required to be replaced shall be measured paid for separately under respective items. 2. Minor spares like nuts,bolts and consumables like Petrol, CRC, Brasso etc for cleaning shall be included in the quoted rateetc cost up to Rs 500 shall be included in the rate quoted above

Supply in replacement Fan belt B-56, for DG set capacity 125 KVA

Supply in replacement Air cleaner for DG set capacity 125 KVA

Supply in replacement Diesel Filter for DG set capacity 125 KVA

Supply in replacement Oil filter for DG set capacity 125 KVA

Supply in replacement High pressure wire braided diesel pipe with benjo bolt 1 mtr long for DG Set upto capacity 125 KVA

Supply in replacement Kirloskar Engine Oil 20W 40

Supply in replacement Battery terminal gun metal as per sample

Supply in replacement Bettery Lead with nagative and positive brass terminals of suitable sizes and length of each lead.

Supply in replacement Coolant ready mix

Servicing of DG set 62.5 KVA of make Kirloskar by taking out U/S spares, Cleaning by brushing to remove dust including cleaning of filter,Checking of all nuts, bolts tightening whereever necessary,check up engine oil level, coolant level and Labour for top up if necessary, adjustment belt tension,Tuning of engine, adjustment of speed, alternator voltage, frequency etc greasing oiling and checking For smooth functioning of DG Set ( Note :- Any spares,Engine oil,coolant,unserviceable spares required to be replaced shall be measured paid for separately under respective items 2. Minor spares like nuts,bolts etc cost up to Rs 500 shall be included in the rate quoted above

Supply in replacement Fan belt B-56, for DG set capacity 62.5 KVA

Supply in replacement Air cleaner for DG set capacity 62.5 KVA

Supply in replacement Diesel Filter for DG set capacity 62.5 KVA

Supply in replacement Oil filter for DG set capacity 62.5 KVA

Supply in replacement High pressure wire braided diesel pipe with benjo bolt 1 mtr long for DG Set upto capacity 62.5 KVA

Supply in replacement Kirloskar Engine Oil 20W 40 make castrol/HP /Equvalent.

Supply in replacement Battery terminal gun metal as per sample

Supply in replacement Bettery Lead with nagative and positive brass terminals of suitable sizes and length of each lead.

Supply in replacement Coolant ready mix make castrol /Equvalent.

Supply and filling of battery water with electrolyte Mix.

Servicing of Generator AMF Panel for 125KVA Gen set complete including and minor consumables like Petrol, CRC, Brasso etc for cleaning shall be included in the quoted rate labour for replacement of u/s spares, testing complete all as specified and directed.

Servicing of Generator AMF Panel for 62.5 KVA Gen set Make : Greaves India complete including labour for replacement of u/s spares, testing and minor consumables like Petrol, CRC, Brasso etc for cleaning shall be included in the quoted rate complete all as specified and directed . Note :- Unsv Spares required for AMF Panel capacity 125 KVA and 62.5 KVA shall be measured and paid under Item No 58 to 70

Supply in replacement Single phase preventor VSP II for 3 phase motor, make minilec or as per sample

Supply in replacement Relay 24V,11 pin with base for AMF Pannel

Supply in replacement Under Voltage relay 415 VAC for AMF Pannel

Supply in replacement Battery Charger 12 Volt DC,for AMF Pannel

Supply and replacement of battery 12V upto 160 AH maintenance free battery, 12 Volt intially charged with suitable size of copper leads and brass terminals complete as directed by Engr-in-charge.

Supply in replacement AMF panel timer relay for circuits 230Volt AC supply as per existing make ad capacity.

Supply in replacement 3 pole power contactor 160 A ,MNX 140 for AMF Pannel make L&T /Siemns

Supply in replacement 3 pole power contactor100 Amp MNX 80 for AMF Pannel make L&T /Siemns

Supply in replacement 3 pole power contactor 250 A for AMF Pannel

Supply in replacement MCCB 3 pole 250 A 25 KA for AMF Pannel make Legrand /Havells/Schneider

Supply in replacement MCCB 3 pole 160 A 16 KA for AMF Pannel

Supply in replacement MCCB 3 pole 100 A 16 KA for AMF Pannel

Dismantling of DG Set Part i.e. Cylider head ,Turbo ,Fuel Pump and taking from the site to workshop for repair and assembling to the DG set including load testing of DG set capacity upto 125 KVA

Supply only in replacement Cylinder liner with joint ring upto capacity up to 125 KVA

Supply only in replacement Piston assembly complete upto capacity up to 125 KVA

Supply only in replacement Gasket for cyl head (1.22mm) upto capacity up to 125 KVA

Supply only in replacement Set of joints (for PG )/4H.3031 upto capacity up to 125 KVA

Supply only in replacement Set of O rings upto capacityup to 125 KVA

Supply only in replacement Set copper washers upto capacity up to 125 KVA

Supply only in replacement Inlet and exhuast valve pair upto capacity up to 125 KVA

Supply only in replacement Valve guide (for inlet & exhuast) upto capacity up to 125 KVA

Supply only in replacement Valve seat insert (inlet) upto capacityup to 125 KVA

Supply only in replacement Valve seat insert (exhaust) upto capacity up to 125 KVA

Supply only in replacement Valve seal upto capacity up to 125 KVA

Supply only in replacement Valve collet upto capacity up to 125 KVA

Supply only in replacement LE bearing STD upto capacity up to 125 KVA

Supply only in replacement Spin on filter for lubricant ing oil upto capacityup to 125 KVA

Supply only in replacement Primary Element upto capacity up to 125 KVA

Supply only in replacement Secondary Element upto capacity up to 125 KVA

Supply only in replacement Lube oil 20 Ltrs Pack

Supply only in replacement Cylinder head repair upto capacity up to 125 KVA

Supply only in replacement Turbo Repair kit upto capacity up to 125 KVA

Supply only in replacement Injector Repair upto capacityup to 125 KVA

Supply only in replacement Fuel Pump/Silencer / Radiator repair upto capacity up to 125 KVA

S&F in replacement street light luminaires, LED type 90 watts, 230 volts AC out door type with high pressure die cast aluminium housing and heat resistant flat complete with driver, lamp bracket GI pipe light grade 1.5 meter long made out of 40 mm bore bend to shape, flat iron clamps made out of 50x6mm flat iron with nut bolts and washers including painting clamps and electric connection with three core 1.5 sqmm copper cable complete as directed.all as specified

S&F in replacement flood light luminaires, LED type 90 watts, 230 volts AC out door type with rectengular with innovative thermal managment in multiple optics and equipped with IP 66 protection resistance to impact and corrosion glare free complete with driver, lamp all as specified.

Supply and fixing in replacement LED driver of 70/90/120 watt suitable for LED fitting all as specified and directed

supply and fix industrial type & heavy duty, Exhaust fan 600 mm sweep metalic body ,copper woumded motor and metalic blades with LOuver shutter ,fixing to the wall with nut bolts/fastner and cutting of hole if required included in the quoted rates

Supply and fixing of Monkey menace protection device with pvc spikes size as per sample all as specified and directed

M & L in replacement of Star delta starter 7.5/10 HP in steel sheet enclosure type starter suitable for 10 HP pumpset comple(motor rating 415 Volts 50 Hz, 3 Phase) including taking down old U/S material complete all as specified and directed.

M&L in replacement LED inverter based 45 watt building security(street light) fitting complete with accessories made of aluminum housing having minimum system efficiency 100 lm/watt operating at full load at AC supply & minimum 20 watt during battery back up , power fractor is equal to or greater 95, CCT 6500K, CRI -80, IP-20, inbuilt Li-ion battery for backup, back up to 4 Hrs for complete tube light (partial back up not allowed), LM-79 & 80 complete all as specified and directed. Make-Halonix HLSLD-ML04-45CWL-INV, Havells. Note: Two year warranty shall be provided by the manufacturer from the date of supply

S and fix street light pole box pvc body with bus bar suitable for phsse netral and earth connection and provision of fixing one SP mcb for ON/OFF control strret lights

M&L for Removing old paint by paint removers or burning off by blow lamps andcleaning with scrapers, any number of coats, any width or girth all as per specified and directed by Engg-in-charge.

M&L for spots with thinner applying two coats of spray painting priming with aluminium oxide on outside with spraying machine to LT Panels indoor/outdoor after disconnecting of power supply from incoming and LT supply from outgoing complete all as specified and directed .

M & L for attending breakdown of DG set at anytime including HOLIDAYS(Saturday ,Sunday national holiday) with one skilled mechanic and 2 nos helper with all the equipments (multimeter,spanner,spray to remove carbon,fault locating machine if any required ).opening of DG set cleaning piston ,water body,cylinder liner and other joint rings ,greasing to each parts .Note:spare parts will be measured separately .Failure or delay to attend the complaints must be penalised

M & L for marking danger sign board on all electrical installations (LT feeder panel,SG set,transformer,water pump,AMF panel etc)

RAJDHANI ENTERPRISES

S.R. Constructions