REPAIR AND RECANNING OF ALL TYPE OF CHAIRS UNDER GE (WEST) LUCKNOW

Amount

REPAIR TO CHAIR EASY : (For Item No 01 to 07) Opening of joints and removing of front leg and S&F new front leg (left/right) made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new and old surface of chair complete all as specified in drawing.DRG NO FD-229

Same as item No 1 but rear legs complete all as specified and as shown in DRG NO FD-229

Same as item No 1 but side frame/front frame complete all as specified and as shown in DRG NO FD-229

Same as item No 1 but arms complete all as specified and as shown in DRG NO FD-229

Taking out old unserviceable cane from chair easy and supply and fixing new cane weaving with 1st quility white cane 2mm H/R shape and 0.6 mm thick as per Godrej pattern compelete all as specified and directed by Egnr-in-Charge. make of cane/ :- Shah & Shah/Premier/ MPI (Maharastra Polymer Industry) (Drg No FD-229

Same as item No 01 but nylon buffers/shoes complete all as specified and shown on in drawing.

Preparation of surface with sand paper after scrubbing and French polishing to chair easy including to the parts repaired/replaced under item No 1 to 4, to the required gloss to match with the existing complete all as specified and as shown on drg. DRG NO FD-229

REPAIR TO CHAIR WRITING :(For Item No 08 to 16) Opening of joints and removing of old front leg and S&F new front leg (left/right) made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new and old surface of chair all as specified in drawing. (DRG NO FD-280)

Same as item No 8 but rear legs complete all as specified and as shown (DRG NO FD-280 )

Same as item No 8 but stiffener complete all as specified and as shown (DRG NO FD-280)

Same as item No 8 but side/front/back rail complete all as specified and as shown (DRG NO FD-280 )

Same as item No 8 but back support complete all as specified and as shown (DRG NO FD-280 &20)

Same as item No 8 but arms complete all as specified and as shown (DRG NO FD-280 )

Taking out old unserviceable cane and supply and fixing new cane weaving with 1st quility white cane 2mm H/R shape made out of vergin plastic and 0.6 mm thick as per Godrej pattern compelete all as specified and directed by Egnr-in-Charge. make of cane/ :- Shah & Shah/Premier/ MPI (Maharastra Polymer Industry) .(DRG NO FD-280 ).

Same as item No 8 but nylon buffers/shoes complete all as specified and shown on in drawing.

Preparation of surface with sand paper after scrubbing and French polishing to chair writing and including to the parts repaired/replaced under item No 8 to 14, to the required gloss to match with the existing complete all as specified and as shown on drg.(DRG NO FD-280 )

REPAIR TO CHAIR DINING : (For Item No 17 to 27) Opening of joints and removing of front leg and S&F new front leg (left/right) made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new and old surface of chair complete all as specified in drawing.(DRG NO FD/MAP-II/05, FD- 279)

Same as item No 17 but rear legs complete all as specified and as shown (DRG NO FD/MAP-II/05, FD-16 & 279)

Same as item No 17 but stiffener complete all as specified and as shown (DRG NO FD/MAP-II/05, FD- 279)

Same as item No 17 but side rail complete all as specified and as shown (DRG NO FD/MAP-II/05, FD-279)

Same as item No 17 but Front/back rail complete all as specified and as shown (DRG NO FD/MAP-II/05, FD-279)

Same as item No 17 but back support complete all as specified and as shown (DRG NO FD/MAP-II/05, FD-279)

Taking out old unserviceable 4MM thick PVC Seat and supply and fixing new 4MM thick PVC seat with holes screwed with rails. Compelete all as specified and as directed. Make of PVC seat AMKO/CONFRO. (DRG NO FD/MAP-II/05)

Supply and fixing new stiffner Size 16"x1-1/2"x1" should be fixed bottom of PVC Seat for support made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new surface of chair complete all as specified and as directed.

Same as item No 24 but nylon buffers/shoes complete all as specified and shown on in drawing.

Taking out old unserviceable cane and supply and fixing new cane weaving with 1st quility white cane 2mm H/R shape made out of vergin plastic and 0.6 mm thick as per Godrej pattern compelete all as specified and directed Make of cane/ :- Shah & Shah/Premier/ MPI (Maharastra Polymer Industry) (DRG NO 279).

Preparation of surface with sand paper after scrubbing and French polishing to chair dining and including to the parts repaired/replaced under item No 15 to 24, to the required gloss to match with the existing complete all as specified and as shown on drg..(DRG NO FD/MAP-II/05, FD-279)

CHAIR STEEL, CB (OFFICE) WITHOUT ARMS & CHAIR CB OFFICE WITH ARMS,CHAIR STEEL TUBULAR WITH ARMS AND W/O ARMS: (For Item No 28 to 36) M&L welding (Gas/Elect) in repair of tubular leg, with fine finishing and standard workman ship all as specified and directed by Engineer-in- Charge.(DRG NO FD-75M)

Taking out U/S seat stiffner and S&F new seat stiffner made of 25x6 mm flat iron and 450 to 500mm long including required two holes for screw before 40mm at each end compelete all as specified on drawing as directed (DRG NO FD-75M)

Taking out U/S stiffener and S&F new stiffiner of mild steel round bars 10mm dia and 450 mm long welded between the legs withfine finishing and standard workman ship and duly painted with two coat of Olive Green paint over a coat of red oxide primer all as specified and directed by Engineer-in- Charge.(DRG NO FD-75M)

Same as item No 28 but 500 mm long complete all as specified and as shown (DRG NO FD-75M)

Taking out U/S seat and back fram chair CB steel and S&F new seat and back fram made of shisham wood well seasoned free from knots and cracks with permissible moisture contents as per shape and size duly black polished up to required finish. Weaving shall be done with platic cane not less than 0.35mm thick as shown on drg No FD-75M

Tacking out old unserviceable cane of seat and back and supply and fixing new cane weaving with 1st quility white cane 2mm H/R shape made out of vergin plastic and 0.6 mm thick as per Godrej pattern compelete all as specified and directed by Egnr-in-Charge as shown as DRG NO FD-75M.

Taking down u/s plastic cap from tubular pipe and S&F new plastic cap of approved quality complete all as specified and as shown (DRG NO FD-75M)

Taking down old unserviceable arms rest and S&F new arm rest made of teak wood duly black and polish complete all as specified and as shown (DRG NO FD-75M)

Apply with two coat of olive green paint over a coat of red oxide primer and supplying recanning of chair tubular steel with and w/o arms complete all as specified and as shown (DRG NO FD-75M)

REPAIR TO CHAIR DINING: DRG No - FD/E6/MAP/10 (For Item No 37 to 44) Opening of joints and removing of front leg and S&F new front leg (left/right) made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new and old surface of chair complete all as specified and as shown in drg.

Same as item No 37 but rear legs 1st class teak wood complete all as specified and shown on in drawing.

Same as item No 37 but stiffener size 20x25 mm 1st class teak wood complete all as specified and shown on in drawing.

Same as item No 37 but all side rail size 65x25 mm 1st class teak wood complete all as specified and shown on in drawing.

Same as item No 37 but nylon buffers complete all as specified and shown on in drawing.

Taking out U/S foam of chair dining and S&F new 75 mm thick 32 density foam with fabric on seat of 12 mm thick ply BWR Grade duly covered with tapestry cloth of approved quality duly stiched complete all as specified and as shown on drawing and driected by Engr-in-Charge. Note : Cost of Tapestry cloth shall not be less than Rs 280/- per metre .

Taking out U/S foam of chair dining and S&F new 75 mm thick 32 density foam with tapestry cloth of approved quality duly stiched complete all as specified and as shown on drawing and driected by Engr-in-Charge. Note : Cost of Tapestry cloth shall not be less than Rs 280/- per metre .

Scraping of old polishing with sand paper/Grinder and prepare surface to apply two coat of french polished to complete Chair repaired /replace under item No 37 to 40 to the required gloss and colour as directed by Engineer-in-Charge.

CHAIR VERANDAH: (For Item No 45 to 50) Welding (Gas /Elect) of frame, 10 mm round bar , legs where as required to make its actual shape and size all as directed by Engineer-in-Charge.(DRG NO FD-256 & FD/MAP/12)

Taking out old U/S rusted legs of chair varandah and S&F new legs made of Conduit pipe 19mm dia 1.6mm thick and 1.35 Mtr duly painted with two coat of enamel paint (white ) over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. (FD-256 & FD/MAP/12)

Preparation of old steel surfaces with sand paper and painting with two coat of synthetic enamel paint (White) complete all as specified as directed. (DRG NO FD-256 & FD/MAP/12)

Taking out old U/S rubber shoe and S&F new hard rubber shoe of 20 mm dia complete all as specified and shown on drg.(FD-256 & FD/MAP/12)

Taking out old unserviceable PVC Seat and back and supply and fixing new PVC Seat & back 4MM thick with weight not less than 1.85 Kgs and grooves 90x10 No on seat & back. Complete all as specified and as shown on drg No FD- FD/MAP/12)

Cutting/taking out old unserviceable cane from chair Verandah and supplying recanning of chair with white plastic cane (Oval shape) 2 mm wide and canning border with 4mm wide cane as per the Godrej pattern complete all as specified and as shown on drg. Make of cane/ :- Shah/Premier brand .(FD-256,)

HALLIOX ENTERPRISES

JAISWAL ENTERPRISES