REPAIR/ REPLACEMENT OF UNSV NURSING CALL BELL SYSTEM ALONGWITH DISPLAY PANEL AND REMOTE PUSH SWITCHES, BED SIDE LAMPS, OT LIGHTS, OT LOW GLARE LIGHTS, OT SENSOR DOORS AND CONNECTED MISC E/M WORKS AT DIFFERENT WARDS AT BHDC UNDER GE (EAST) DELHI CANTT

Amount

S & F in replacement of Handy and light weight remote control for patients with remote with jacket to fix mount on wall and having Battery type: 12volts DC / 23A & Range indoors: 20-30 meters complete all as specified and directed. Make:FORBIX SEMICON / Honeywell/ Hochiki.

S & F in replacement of 4-digit receiver display Operates on 12VDC (comes along with 220-110VAC converter) having display size of extra large alphabets complete all as specified and directed. Make : - FORBIX SEMICON / Honeywell/ Hochiki.

S & F in replacement of Repeater booster enhances the range of signals furthermore high power repeater provides additional 50-60meters and additional repeater improves the signal to noise ratio (SNR), at some multiple repeaters in series are required complete all as specified and directed. Make :FORBIX SEMICON / Honeywell/ Hochiki

S & F in replacement Power supply adapter converter of input as 220vac to 12v dc as out put complete all as specified and directed.

S & F in replacement alkaline battery 23A 12V as out put complete all as specified and directed.

M&L for comprehensive maintenance of 11 Nos OT sensor door, detailed as under complete all as specified and directed:- (i) Free maintenance and replacement of Normal accessories (Spare Parts). (ii) Preventive maintenance of all systems on quarterly basis and upkeep of log book. (iii) Attending all complaints within 24 working hours intimated by JE-in-Charge. (iv) Field service report shall be maintained and submitted to the JE-in-Charge after expiry of every month . Note:- (a) The rates quoted by the contractor shall deemed to be inclusive of T&P etc (b) Major Spares Part shall be measured and paid for separately under respective item of this Schedule as supply only. (c) A penalty of Rs 500.00 per complaint per day shall be imposed on contractor, if the complaint shall not attended within 24 Hours of complaint intimated by Engr-in-Charge.

M&L for comprehensive maintenance of 01 No ICU Glass door, detailed as under complete all as specified and directed:- (i) Free maintenance and replacement of Normal accessories (Spare Parts). (ii) Preventive maintenance of all systems on quarterly basis and upkeep of log book. (iii) Attending all complaints within 24 working hours intimated by JE-in-Charge. (iv) Field service report shall be maintained and submitted to the JE-in-Charge after expiry of every month. Note:- (a) The rates quoted by the contractor shall deemed to be inclusive of T&P etc (b) Major Spares Part shall be measured and paid for separately under respective item of this Schedule as supply only. (c) A penalty of Rs 500.00 per complaint per day shall be imposed on contractor, if the complaint shall not attended within 24 Hours of complaint intimated by Engr-in-Charge.

S & F in replacement motor for sliding door ICU complete all as specified and as directed.

S & F in replacement controller for sliding door ICU complete all as specified and as directed.

S & F in replacement wheel for sliding door ICU complete all as specified and as directed.

S & F in replacement anti jump roller for sliding door ICU complete all as specified and as directed.

S & F in replacement motion sensor for sliding door ICU complete all as specified and as directed.

S & F in replacement safty sensor for sliding door ICU complete all as specified and as directed.

S & F in replacement encoder cable for sliding door ICU complete all as specified and as directed.

S & F in replacement glass clamp for sliding door ICU complete all as specified and as directed.

S & F in replacement belt for sliding door ICU complete all as specified and as directed.

S & F in replacement Return Pully for sliding door ICU complete all as specified and as directed.

S & F in replacement Belt Clamp set for sliding door ICU complete all as specified and as directed.

S & F in replacement floor guide for sliding door ICU complete all as specified and as directed.

S & F in replacement SMPS for sliding door ICU complete all as specified and as directed.

S & F in replacement Carrier head assembly for sliding door ICU complete all as specified and as directed.

S & F in replacement motor for OT door complete all as specified and as directed.

S & F in replacement controller for OT door complete all as specified and as directed.

S & F in replacement SMPS for OT door complete all as specified and as directed.

S & F in replacement Hand Sensor for OT door complete all as specified and as directed.

S & F in replacement safty beam sensor for OT door complete all as specified and as directed.

S & F in replacement foot switch for OT door complete all as specified and as directed.

S & F in replacement Roller set for OT door complete all as specified and as directed.

S & F in replacement belt for OT door complete all as specified and as directed.

S & F in replacement floor guide set for OT door complete all as specified and as directed.

S & F in replacement Belt Clamp Set for OT door complete all as specified and as directed.

S & F in replacement Carrier Assembly Set for OT door complete all as specified and as directed.

Supply , Installation , Testing & Commissioning in replacement microprocessor based networkable analogue addressable Fire Alarm control panel The control panel shall have DXC2 two loop fire detection system supports morley protocol ,with two sounder circuit(1 A max) , 2A power supply source, a general relay ( Alarm and Fault),one programmable relay, fixed auxilary output and resettable 24 v 250mA output, two keys and two inputs for programmable function The panel also include 6x40 character LCD display,an integrated USB port for PC programming and an RS485 port for repeters.The panel shall have 240v AC Powersupply along with automatic battery charger.The panel shall have configurable via USB Port to PC or memory stick.The Panel shall have dedicated RS232 serial port for optional printer approved by LPCB complete all as specified and directed MAKE- Honeywell/Hochiki/Apolo

Supply & Commissioning in replacement of weatherproof analogue Manual Call point with Integral short circuit Isolator.The call point shall have fast response , Integral short-circuit isolator,Bi-coloured status LED ,Non Frangible element fitted as standerd, surface mounted ,IP67 rated complete all as specified and directed. MAKE- Honeywell/Hochiki/Apolo

Supply & Commissioning in replacement of Output Relay Module MI/DCMOE complete all as specified and directed. MAKE- Honeywell/Hochiki/Apolo

Supply & Commissioning in replacement of Siren 2 km Horizontal/Vertical Single Mounting complete all as specified and directed. MAKE- Honeywell/Hochiki/Apolo

Supply & Commissioning in replacement of Siren Controller complete all as specified and directed. MAKE- Honeywell/Hochiki/Apolo

Supply & laying in replacement of 2CoreX1.5 Sqmm of FRLS Copper Cable, complete all as specified and directed.

Supply & laying in rteplacement of PVC Conduit of 20 mm dia with all fittings complete all as specified and directed .

S& F in replacement Bedside Light 3 Watt, 400 lumens - 3000k , separate on/off switches, shade material aluminium with white powder coating, finish colour white, adjustable head for better beam and focus standard complete all as specified and as directed. Make :- Philips 48042 Black or equivalent in Bajaj/Havells /Crompton

M&L point wiring with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 25 mm dia medium grade and fittings such as tees, bends, elbow and 1.5Sqmm FRLS PVC insulated unsheathed copper conductor mulistranded earth wire, connecting to common earth dolly including Metal Flush Box, Cover plate with frame cutting chases and making good disturbed surface finish in CM 1:3 to match with existing surface including taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches, Sockets, holders, ceiling roses, light fitting regulators etc (to be measured and paid separately under relevent item of this Sch as S&F in repair and credit for these item given in credit schedule here-in-after) for one light point/ fan/ bell point controlled by one 1-way switch complete all as directed.

All as per item No.44.00 here in before but for one three pin, 5 Amp, socket out let on independent board complete all as specified and as directed.

All as per item No. 44.00 here in before but for one three pin, 5 Amp, socket out let on same board complete all as specified and as directed.

All as per item No. 44.00 here in before but point wiring with 2.5 Sqmm, multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor complete all as specified and as directed.

All as per item No. 44.00 here in before but point wiring with 2.5 Sqmm, multistranded, copper conductor cable, for 15 Amps socket outlet onSame board with 2.5 Sqmm size earth conductor complete all as specified and as directed.

All as per item No. 44.00 here in before but point wiring with 4 Sqmm, multistranded, copper conductor cable, for AC point on independent board with 4 Sqmm size earth conductor complete all as specified and as directed.

S&F in replacement modular switch, 1 way, 6 Amp, 1 Module, complete all as specified and as directed. Make- Anchor Roma /Legrand/Indoasian

S&F in replacement modular switch, 1 way, 16 Amp, 1 Module, complete all as specified and as directed. Make- Anchor Roma /Legrand/Indoasian

S&F in replacement modular Socket, 16/6 Amp, 3/5 Pin, combined, 2 module complete all as specified and as directed.Make- Anchor Roma /Legrand/Indoasian

S&F in replacement modular Socket, 6Amp, 2/3 Pin, combined, 2 module complete all as specified and as directed.Make- Anchor Roma /Legrand/Indoasian

S&F in replacement modular cover plate with frame, 3 modules complete all as specified and as directed.Make- Anchor Roma /Legrand/Indoasian

S&F in replacement modular cover plate with frame, 4 modules complete all as specified and as directed.Make- Anchor Roma /Legrand/Indoasian

S&F in replacement modular cover plate with frame, 6 modules complete all as specified and as directed.Make- Anchor Roma /Legrand/Indoasian

S&F in replacement modular metal flush box, 3 modules complete all as specified and as directed.Make- Anchor Roma /Legrand/Indoasian

S&F in replacement modular metal flush box, 4 modules complete all as specified and as directed.Make- Anchor Roma /Legrand/Indoasian

S&F in replacement modular metal flush box, 6 modules complete all as specified and as directed.Make- Anchor Roma /Legrand/Indoasian

S&F sub main wiring with 2 runs of 4 Sqmm FRLS single core PVC insulated & unsheathed cabl, 1100 Volts grade with multi stranded copper conductor drawn through and including 20 mm dia concealed PVC rigid non metallic conduit medium grade as per IS with all fittings and one run of 4 Sqmm FRLS PVC insulated copper conductor including cutting chases and making good in CM 1:3 to match with existing surfaces complete all as specified and as directed. Make :- Havells. Note:- (Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

S&F sub main wiring with 2 runs of 6 Sqmm FRLS, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 25 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 6 Sqmm FRLS, PVC insulated copper conductor including cutting chases and making good in CM 1:3 to match with existing surfaces complete all as specified and as directed. Note:- (Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

S&F sub main wiring with 4 runs of 10 Sqmm FR, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 32 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and two run of 10 Sqmm FR, PVC insulated copper conductor including cutting chases and making good in CM 1:3 to match with existing surfaces complete all as specified and as directed. Note:- (Four run of cable along with 2 run earth conductor including PVC rigid conduit shall be measured as one RM length).

S & F in replacement for distribution board double door type, SPN, 12 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. Make-Legrend/ Havells/ ABB /L&T

S & F in replacement for distribution board double door type, SPN, 8 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. Make-Legrend/ Havells/ ABB /L&T

S & F in replacement MCCB 415 V, 125 Amps, 25 KA, 4 Pole complete all as specified and directed. Make -Legrend/ Havells/ ABB /L&T

S & F in replacement MCB TPN, 415 Volts, 63 Amps complete all as specified and directed. Make -Legrend/ Havells/ ABB /L&T

S & F in replacement MCB DP, 240 Volts, 40 Amps complete all as specified and directed. Make -Legrend/ Havells/ ABB /L&T

S & F in replacement MCB DP, 240 Volts, 63 Amps complete all as specified and directed. Make -Legrend/ Havells/ ABB /L&T

S & F in replacement MCB SP, 240 Volts, 16 Amps complete all as specified and directed. Make -Legrend/ Havells/ ABB /L&T

S & F in replacement MCB SP, 240 Volts, 32Amps complete all as specified and directed. Make -Legrend/ Havells/ ABB /L&T

M&L in replacement for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts, checknuts and washers of galvanized iron or steel as shown in electrical plate No 3 connected to earthing test point including testing on completion all as directed. Note:- The unit rate quoted shall be include for necessary excavation and earth work ,earth strip connected to test point max 7 mtr as per site requirement, PCC 1:3:6 type for earth pit & Pit cover, funnel with wire mesh including GI light grade 15mm bore as protection pipe and 20mm dia medium grade GI pipe as water pipe.

Supply, fixing and connecting in replacement recessed mounting back- lit LED 2X2, 36 watt tile in CRCA housing with full opal diffuser suitable for Armstrong/ Grid Ceilings Type, size 595X595mm (Nominal),High lumen efficacy LED with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection minimum 2.5KV, safety & performance test as per IS:15885 Total system Lumen not less than 3600, in Cool day Light (6500K), Power factor>0.95, CRI (Ra) >80 with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. ORIENT / Philips/ Havells

Supply, fixing and connecting in replacement of Slim LED Batten 20 watt with Surface/Wall Mounted integrated LED 4 feet Fitting Aluminium housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV . Total system Lumen of 20W Led should be 2000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.Make : ORIENT / Philips/ Havells

S & F in replacement of LED 50 inner 8 port circuit complete all as specified and directed.

S & F in replacement of LED 50 outer controller circuit complete all as specified and directed.

S & F in replacement of LED 50 keypad complete all as specified and directed.

S & F in replacement of LED 50 LED's, 6 LED's with lens complete all as specified and directed.

S & F in replacement of LED 50 SMPS(switching mode power supply) with lens complete all as specified and directed.

S & F in replacement of extra sterilizable handle (yellow/white colour) complete all as specified and directed.

S & F in replacement of 650 VA UPS complete all as specified and directed.

S & F in replacement of 650 VA UPS Batteries complete all as specified and directed.

S & F in replacement of 650 VA UPS Circuit complete all as specified and directed.

S & F in replacement of 650 VA UPS Control box complete all as specified and directed.

M & L in repair LED 50 OT Light Double Dome of shaft, double arm, spring arm, dome arm, inside complete wiring of the unit including PCB, Power supply, LED controller complete inspection all as specified and directed.

Saini Enterprises (BID ID -3149640)

M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3155261)

M/s Sree Baba Traders (BID ID -3149826)

RUCHIKA ENGG.WORKS (BID ID -3153208)

R R Associates (BID ID -3152650)