SPECIAL REPAIR IN BLDG NO NP2301 TO 08 OR MD ACCN OF AL AREA UNDER GE WEST FEROZEPUR CANTT

Amount

Dismantling brick tiles or terracing tiles laid in single layer on roofs jointed and pointed in cement mortar complete all as specified.

Demoletion of mud phuska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L for 10 mm thick screed plaster in cement mortar 1:4 finished even and smooth without using extra cement on top of roof complete all as specified and directed.

M&L for applying tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm including cleaning surfaces complete all as specified and directed.

S&F 150 micron polythene film including preparation of roof surfaces complete all as specified.

M&L for 80 mm thick average consolidated thickness,mud phuska on flat roofs including 25 mm thick mud plaster complete all as specified and directed.

M&L for 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5 % of crude oil by weight of cement on mud phuska and pointed flush as work proceeds complete all as specified and directed.

M&L except tiles for 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5 % of crude oil by weight of cement on mud phuska and pointed flush as work proceeds complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc any descriptionall as specified.

Material and labour rendering 15 mm thick cement plaster in CM 1:4 on other than fair faces of brick/concrete work surfaces mixed with integral water proofing compound finished even and smooth (without using extra cement ) all as per manufacturer's instruction and as specified. Make: 'Plastocrete Plus' of Sika/ 'Pidiproof LW' of Pidilite for water proofing compound. Note: (i) WPC shall be measured and paid for separately as 'Supply only'. (ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instruction.

Material and labour rendering 15mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfasces finished even and smooth (without using extra cement ) all as specified and directed.

Supply only liquid water proofing compound.

M&L for preparing new surfaces of walls by scrapping/rubbing and applying two coat of cement based paint complete all as specifeid

M&L for preparing old surfaces of walls by scrapping/rubbing and applying two coat of cement based paint complete all as specifeid

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of water based primer over 3mm thick (average) wall care putty applied in two coats including rubbing with siutable sand paper complete all as specified.

M&L for preparation of new surfaces and applying two coats of oil bound distemper over a coat of water based primer over 3mm thick (average) wall care putty applied in two coats including rubbing with siutable sand paper complete all as specified.

M&L for preparation of old ceiling surfaces and applying one coat of white wash complete all as specified and directed.

Taking down chowkhats exc 1.50 sqm and n.exc 4.00 sqm without taking off shutter each upto 04 storeys complete all as specified and directed.

Taking down chowkhats n exc 1.50 sqm each without taking off shutter each upto 04 storeys complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but n exc. 2.00 sqm each complete all as specified and directed.

Supply & fix factory made 35 mm thick 2nd hard wood rail and style plain framed panelled shutters(any panel) with lock rail and panel of 9 mm thick B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

Item as per srl No 21 above but fixining only

Supplied and fitted to chowkhats of factory made 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) complete all as specified and directed.

S&F 105 x 65 mm size factory made Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F Factory made Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with one rebate including lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

M&L PCC 1:3:6 type C1(20 mm graded aggregate) as in bed blocks for hold fast , filling of pressed steel chowkhat and all other similar works including necesssary formwork where ever required complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel.

S&F aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed.

S&F aluminium handle 150 mm cast type anodised

Supply and fix factory made solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified.

M&L for Preparing new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel painting over and incl one coat of pink primer

M&L for Preparing old wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coats of synthetic enamel paint complete all as specified

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Providing and fixing factory made PVC cup boards/ Shelf / Partition of required size consisting of panel of 18mm thick Celuka PVC Ply and for supporting the hold of Shelf/ Partition and shall provided 3edges in size 18mm x18mm as per required length. The front side of the edge visible in the front of the shelf/ Partition to be edge lipped by 18mm width x 1mm thick PVC sheet using solvent cement etc. complete as direction of Engineer-in-charge, manufacturer's specificaton and drawing.

S&F Extruded aluminium alloy handles, fabricated type,anodised 125mm long

S & F continuous (Piano) hinges M S bright finish or Electro galvanized 25 mm wide flaps (when open) including welding to existing frame complete all as specified and directed.

M&L Size of hasp and staple in 125mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws but of aluminium anodised

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed.

M&L coloured ceramic tiles 7 to8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L coloured ceramic tiles 7 to8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in vertical surfaces such as skirtings and dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and directed.

M&L rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

M&L glazed tiles digital coloured ceramic tiles 300x450x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid 15 mm thick in cm 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish complete all as specified and directed.

M&L for machine cut kota stone in risers of steps,skirting and dado 20-25 mm thick over cement plaster 10 mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish complete all as specified and directed.

M & L Green marble slab, 16-18mm thick of size not less than 1 Sqm each, machine cut as cooking platform or in any position, set and bedded in gray cement slurry over & including 15mm thick screed in cement mortar (1:4) and pointed in white cement with admixture of pigment to match the shade of marble including cutting, polishing (mirror type), molding complete all as specified.

Supply & Fixing in repair vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

S&F in repair vitreous China wash basin white, flat back,size 580X450 mm with pedestal including cutting for pinning in ends of brackets,complete.

M&L in repair CP soap dish holder complete all as specified and directed.

Supply and fixing 15 mm bore 125 mm size overhead shower single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 240 mm long(light weight) round shape with wall flange complete all as specified & directed.

S&F as in repair 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions .

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia bore complete all as specified and directed

All as per item No -56 above but 20mm bore

Fixing only old 15 mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and directed

All as per item No -58 but 20 mm bore

S/F GI tubing 15mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors complete all as specified and directed

All as per item No -60 but 20 mm bore

S&F as in repair 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule.

S&F as in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions

S&F in repair PVC connection 15mm size PTMT nuts of length 450 mm.

M&L in repair 75 mm dia PVC(SWR) multi floor trap including jointing with solvent cement complete all as specified and directed.

M&L in repair CP Towel Rail (61 CM) all as per Sample.

S&F as in repair grating square 150mm size of PTMT(minimum 100 gms) complete all as specified.

S&F sheet shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

S&F in repair 20 mm dia decorative type curtain rods chromium plated anodised aluminium alloy and all other connected works complete all as specified and directed.

S&F in repair fancy type powder coated aluminium bracket with gloves for curatin rod suitable for 20 mm dia pipe all as directed.

Demoletion and breaking up drain pipes 100 mm dia (Salt glazed ware,AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed

Demoletion and breaking up drain pipes 75 mm dia (Salt glazed ware,AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed

S&F 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls complete all as specified and directed.

All as per Item No-73 above but laid in trenches or in floors.

All as per Item No-73 above but 110 mm dia.

All as per Item No-73 above but 110 mm dia.

S&F 75mm dia PVC (SWR) bends with access doors any radius.

All as per Item No-77 above but 110 mm dia.

S&F 75 mm dia PVC (SWR) junction single, (single T) equal or uequal provided with access door complete all as specified and directed.

Ditto all as per Item No-79 above but 110 mm dia.

S&F 75 mm dia PVC (SWR) vent cowl.

S&F for replacement of old unserviceable PVC rotational water tank by providing new rotational moulded polyethelene water storage tank double layered ISI marked (Cylindrical verticle with closed top) hoisted and fixed in position all as directed of capacity 1000 ltr including dismantling & taking out old unserviceable item complete. (Make :- Sintex/Polycon/Ashis Plast).

Supply and fix in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm dia.

S&F Gun metal globe or Gate valve with iron wheel head, screwed both end for iron pipe and fixed as per requirement of site and as directed by engineer in charge including dismantling and taking out old unserviceable item complete fo 20 mm size. (Make :- Leader/Zolata/Hindustan).

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W(Gde-E-250) quality-A complete all as specified and directed.

S&F 0.63 mm thick mild steel , plain, black sheet in wall cladding, stell gates and similar work, cut to size holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up, mitered angles, etc as required complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer complete all as specified and directed.

Demolition of brick work including all quoins, arches,pillars etc. but excluding ashlar facings built in cement mortar complete all as directed .

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified & as directed.

All as per item No-90mentioned here in above but except bricks. (Serviceable bricks obtained from Item No-89 above to be reused.)

S&F in repair sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330mm x 160mm.

S&F in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel sheet of size 750x600mm including screws complete all as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified & directed.

S&F mild steel, box type windows with side hung shutters (glazed shutters) including projecting type hinges with steel handles and steel peg stay, complete with sash bars, dovetailed or welded to receive wire gauge or glass with one shop coat of zinc chromate primer complete all as specified and directed.

S&F mild steel, box type windows with side hung shutters (wire gauge shutters) including projecting type hinges with steel handles and steel peg stay, complete with sash bars, dovetailed or welded to receive wire gauge or glass with one shop coat of zinc chromate primer complete all as specified and directed.

S&F mild steel,box type ventilator with side hung shuttes including projecting type hinges with steel handles and steel peg stay, complete without sash bars, dovtailed or welded complete all as specified and directed.

M&L for 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n. exc. 0.50 sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F framed work such as grills,gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors framed balausters, walk ways,railings, framework of water tanks and similar works conforming to Fe 290, Gde-E-165 complete all as specified and directed.

M&L for two coat of synthetic enamel paint (ordinary tint) to the steel surfaces having shop coat primer red oxide (zinc chrome) over 10 cm in width or girth not otherwise described complete all as specified and directed.

Material and labour for crushed sand filling under precast interlocking paver blocks/sand filling under floors, foundation or cable protection and all other similar works complete all as specified and directed.

Material and labour for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete and sunken floor treatments complete all as specified and directed.

Providing, precast cement concrete type B1 1:2:4 (20mm graded aggregates) for kerb stones, corbels and all other similar works with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match all as specified and directed.

M&L for 75 mm thick cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as in sub base to interlocking paver blocks and all other similar works complete all as specified and directed.

M&L rubber moulded glossy finished precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over sand cushning including compaction of paver blocks using surface vibrator all as specified and directed. Note :- Sand cushioning shall be paid separately under relevant item

Demolition of cement concrete in ground floor n.exc 15cm thickness (below or above ground level) and removing the demolished material and debris out side MD land.

M&L 50 mm PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement including necessary complete all as specified and directed.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls , floors ,etc.

M &L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

Supply & Fixing Switch piano flush type single pole one way 5/6 Amp complete all as directed.

S&F LED tube light fitting 1 X 18 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No LHEXBLP7UN1W018 Make - Havells or equivalent to Crompton/Bajaj/Philips

Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified

Supply & Fixing MCCB 63 Amps, 415 volts, 16 KA, 4 Pole complete all as specified.

Supply & Fixing MCB, Single Pole and neutral 240 V, 32 Amps 10 KA 'B' series.

Supply & Fixing MCB, Single pole 240 V,6 - 32 Amps 10 KA 'B Series.

M & L for sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia ( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run)

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core.

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)

Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling, including spreading, levelling, watering and well ramming in layrs not exc. 25cmin soft/loose soil complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50m and dpositing where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed.

M & L Bricks; common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise acrose the line of cable in trenches for protection of UG cable.

Mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc as required all as specified.

M/s Sanjiv Kumar

M/S Pee Kay Builders

Kissan contractor and engg works

manoj and company

M/S Yashpaul Gulati

M/s Bansi Lal

R.S.ENTERPRISES