External development and other Misc works horticulture , landscaping works, Construction of small building, SITC of different equipment machineries,

5.33.1 Providing and laying in position machine batched and machine CUM 87.29 9504.75 9504.75 8,29,698.14

mixed design mix M-25 grade cement concrete for reinforced

cement concrete work, using cement content as per approved

design mix, including pumping of concrete to site of laying but

excluding the cost of centering, shuttering, finishing and

reinforcement, including admixtures in recommended proportions

as per IS: 9103 to accelerate, retard setting of concrete, improve

workability without impairing strength and durability as per direction

of Engineer-in-charge. (Note :- Cement content considered in this

item is @ 330 kg/cum. Excess/ less cement used as per design mix

is payable/recoverable separately). All works upto plinth level

5.33.2 Providing and laying in position machine batched and machine CUM 56.59 9860.40 9860.40 5,58,038.49

mixed design mix M-25 grade cement concrete for reinforced

cement concrete work, using cement content as per approved

design mix, including pumping of concrete to site of laying but

excluding the cost of centering, shuttering, finishing and

reinforcement, including admixtures in recommended proportions

as per IS: 9103 to accelerate, retard setting of concrete, improve

workability without impairing strength and durability as per direction

of Engineer-in-charge. (Note :- Cement content considered in this

item is @ 330 kg/cum. Excess/ less cement used as per design mix

is payable/recoverable separately). All works above plinth level

upto floor V level

5.35 Add for using extra cement in the items of design mix over and Quintal 457.55 733.50 733.50 3,35,610.04

above the specified cement content therein.

6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of -

class designation 7.5 in superstructure above plinth level up to

floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 69.77 9105.95 9105.95 6,35,358.56

Digitally signed by ARTI

8.10 Providing and fixing stone slab with table rubbed, edges rounded -

and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in

urinal partitions by cutting a chase of appropriate width with chase

cutter and embedding the stone in the chase with epoxy grout or

with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate 6 mm nominal size) as per direction of Engineer-

in-charge and finished smooth.

8.10.2 Granite stone of Approved Shade Sqm 3.75 4051.85 4051.85 15,194.44

8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming sqm 61.81 1267.95 1267.95 78,371.99

to IS: 15622 (thickness to be specified by the manufacturer), of

approved make, in all colours, shades except burgundy, bottle

green, black of any size as approved by Engineer-in-Charge, in

skirting, risers of steps and dados, over 12 mm thick bed of cement

mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement

slurry @ 3.3kg per sqm, including pointing in white cement mixed

with pigment of matching shade complete.

11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm sqm 29.75 1096.55 1096.55 32,622.36

(thickness to be specified by the manufacturer) of 1st quality

conforming to IS : 15622 of approved make in colours such as

White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement

mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement

slurry @ 3.3 kg/sqm including pointing the joints with

white cement and matching pigment etc.,complete

9.1 Providing wood work in frames of doors, windows, clerestory -

windows and other frames, wrought framed and fixed in position

with hold fast lugs or with dash fasteners of required dia & length

(hold fast lugs or dash fastener shall be paid for separately).

9.21 Providing and fixing ISI marked flush door shutters conforming to IS -

: 2202 (Part I) non-decorative type, core of block board

construction with frame of 1st class hard wood and well matched

commercial 3 ply veneering with vertical grains or cross bands and

face veneers on both faces of shutters:

Digitally signed by ARTI

9.21.2 30 mm thick including ISI marked Stainless Steel butt hinges sqm 18.90 2172.10 2172.10 41,052.69

with necessary screws

9.53 Providing 40 x 5 mm flat iron hold fast 40 cm long including fixing to Each 72.00 228.85 228.85 16,477.20

frame with 10 mm diameter bolts , nuts and wooden plugs and

embedding in cement concrete block 30 x 10 x 15 cm 1:3:6 mix ( 1

cement : 3 coarse sand : 6 graded stone aggregate 20 mm

9.127 Providing & Fixing decorative high pressure laminated sheet of -

plain / wood grain in gloss / matt/ suede finish with high density

protective surface layer and reverse side of adhesive bonding

quality conforming to IS : 2046 Type S, including cost of adhesive

approved quality.

9.96 Providing and fixing aluminium sliding door bolts, ISI marked -

anodised (anodic coating not less than grade AC 10 as per IS :

1868), transparent or dyed to required colour or shade, with nuts

and screws etc. complete :

9.92 Providing and fixing chromium plated brass handles with necessary -

screws etc. complete:

12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm Each 14.00 298.25 298.25 4,175.50

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x

400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3

coarse sand) and a coat of neat cement, rounding the edges and

making and finishing the outlet complete

12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 -

coarse sand : 4 stone aggregate 10 mm and down gauge),

including finishing with cement mortar 1:3 (1 cement : 3 fine sand)

as per standard design

Digitally signed by ARTI

13.4 12 mm cement plaster of mix : -

13.11 18 mm cement plaster in two coats under layer 12 mm thick cement sqm 248.67 518.55 518.55 1,28,947.60

plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6

mm thick cement plaster 1:6 (1 cement : 6 fine sand).

13.21 Extra for providing and mixing water proofing material in cement per per bag 41.80 22.10 22.10 923.79

bag of plaster work in proportion recommended by the of 50 kg

manufacturers. cement

13.80 Providing and applying white cement based putty of average Sqm 648.67 156.05 156.05 1,01,224.89

thickness 1 mm, of approved brand and manufacturer, over the

plastered wall surface to prepare the surface even and smooth

13.85 Applying priming coats with primer of approved brand and -

manufacture,having low VOC(Volatile Organic Compound)

13.85.3 With water thinnable cement primer on wall surface having Sqm 248.67 73.95 73.95 18,389.11

VOC content less than 50 grams/litre

13.114 Melamine polishing on wood work (one or more coat). sqm 8.91 1192.30 1192.30 10,623.39

13.46 Finishing walls with Acrylic Smooth exterior paint of required shade -

13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm Sqm 139.33 160.60 160.60 22,377.17

over and including priming coat of exterior primer applied @ 2.20

13.41 Distempering with 1st quality acrylic distemper (ready mixed) having -

VOC content less than 50 gms/litre, of approved manufacturer, of

required shade and colour complete, as per manufacturer's

13.41.1 Two or more coats on new work and including water thinnable Sqm 1139.33 185.65 185.65 2,11,517.50

priming coat with cement primer having VOC contnent less than 50

22.3 Providing and laying water proofing treatment to vertical and -

horizontal surfaces of depressed portions of W.C., kitchen and the

like consisting of:

Digitally signed by ARTI

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water -

proofing compound conforming to IS 2645 in recommended

proportions including rounding off junction of vertical and horizontal

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) -

mixed with water proofing compound in recommended proportion

including rounding off junction of vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 -

kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of sqm 146.10 769.60 769.60 1,12,438.56

PVC sheet should be 100 mm wide and pasted to each other with

bitumen @ 1.7 kg/sqm).

17.2 Providing and fixing white vitreous china pedestal type water closet -

(European type W.C. pan) with seat and lid, 10 litre low level white

P.V.C. flushing cistern, including flush pipe, with manually

controlled device (handle lever), conforming to IS : 7231, with all

fittings and fixtures complete,

including cutting and making good the walls and floors wherever

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 7.00 6515.55 6515.55 45,608.85

17.16A Providing and fixing 8mm dia C.P./S.S. Jet with flexible tube upto Each 7.00 349.15 349.15 2,444.05

1meter long with S.S. Triangular plate to european type W.C. Of

quality and make as approved by engineer in charge.

17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. -

brass pillar taps, 32 mm C.P. brass waste of standard pattern,

including painting

of fittings and brackets, cutting and making good the walls wherever

17.7.4 White Vitreous China Flat back wash basin size 550x Each 7.00 1879.20 1879.20 13,154.40

400 mm with single 15 mm C.P. brass pillar tap

17.22A Providing and fixing CP Brass 32mm size bottle trap of approved Each 7.00 1034.80 1034.80 7,243.60

quality & make and as per the direction of engineer in charge.

17.30' Providing and fixing in position 25 mm diameter mosquito proof each 8.00 55.65 55.65 445.20

coupling of approved municipal design.

Digitally signed by ARTI

17.31 Providing and fixing 600x450 mm beveled edge mirror of superior Each 7.00 1607.95 1607.95 11,255.65

glass (of approved quality) complete with 6 mm thick hard board

ground fixed to wooden cleats with C.P. brass screws and washers

18.18 Providing and fixing ball valve (brass) of approved quality, High or -

low pressure, with plastic floats complete :

18.52 Providing and fixing C.P. brass stop cock (concealed) of standard -

design and of approved make conforming to IS:8931.

18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and -

threading the pipe and making long screws etc. complete (New

18.49 Providing and fixing C.P. brass bib cock of approved quality -

conforming to IS:8931 :

18.53 Providing and fixing C.P. brass angle valve for basin mixer and -

geyser points of approved quality conforming to IS:8931

12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water -

pipes conforming to IS : 13592 Type A, including jointing with seal

conforming to IS : 5382, leaving 10 mm gap for thermal expansion,

(i) Single socketed pipes.

18.21 Providing and fixing uplasticised PVC connection pipe with brass -

18.21.2 45 cm length -

Digitally signed by ARTI

12.43 Providing and Fixing on wall face unplasticised - PVC pipe clips of -

approved design to unplasticised - PVC rain water pipes by means

of 50 x 50 x 50 mm hard wood plugs, screwed with M.S. screws of

required length including cutting brick work and fixing in cement

mortar 1:4 (1 Cement: 4

Coarse sand) and making good the walls etc. complete

12.44 Providing and Fixing to the inlet mouth of rain water pipe cast iron Each 21.00 54.70 54.70 1,148.70

grating 15 cm diameter and weighing not less then 440 grams.

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, -

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps

at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and the cost of cutting chases and

making good the same including testing of joints complete as per

direction of Engineer in Charge.

Concealed work, including cutting chases and making good the -

18.8.2 20 mm nominal dia Pipes metre 110.00 537.60 537.60 59,136.00

18.10 Providing and fixing G.I. pipes complete withh G.I. fittings and -

clamps, i/c cutting and making good the walls etc.

Internal work - Exposed on wall and terrace -

18.12 Providing and fixing G.I. pipes complete with G.I. fittings -

includingtrenching and refilling etc.

External Work -

18.38 Painting G.I. pipes and fittings with synthetic enamel white paint -

with two coats over a ready mixed priming coat, both of approved

quality for new

Digitally signed by ARTI

18.48 Providing and placing on terrace (at all floor levels) polyethylene Litre 5000.00 11.00 11.00 55,000.00

water storage tank, IS : 12701 marked, with cover and suitable

locking arrangement and making necessary holes for inlet, outlet

and overflow pipes but without fittings and the base support for

19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. -

pipes with collars jointed with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand) including testing of joints

etc. complete :

Digitally signed by ARTI

19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 -

with stiff mixture of cement mortar in the proportion of 1:1 (1 cement

: 1 fine sand) including testing of joints etc. complete:

19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse -

sand : 10 graded stone aggregate 40 mm nominal size) all-round

S.W. pipes including bed

concrete as per standard design:

19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 -

complete with C.I. grating brick masonry chamber with water tight

C.I. cover with frame of 300 x300

mm size (inside) the weight of cover to be not less than 4.50 kg and

frame to be not less than 2.70 kg as per standard design :

19.4.2 150 x 100mm size P-type -

19.4.2.1 With common burnt clay F.P.S. (non modular) bricks of class Each 22.00 2734.20 2734.20 60,152.40

designation 7.5

19.7 Constructing brick masonry manhole in cement mortar 1:4 (1cement -

: 4 coarse sand) with RCC top slab with 1:2:4 mix (1 cement : 2

coarse sand 4 graded stone aggregate 20mm nominal size)

foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded

stone aggregate 40 mm nominal size) inside plastering 12 mm thick

with cement mortar 1:3 (1 cement : 3 coarse sand) finished with

floating coat of neat cement and making channels in cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) finished with a floating coat of neat

cement complete as per standard design.

19.7.1 Inside size 90 x 80 cm and 45 cm deep including pre-cast R.C.C. -

manhole cover and frame of required shape and approved quality H

D - 20 Circular shape 560

mm internal diameter.

19.7.1.2 With Sewer bricks conforming to IS : 4885 Each 22.00 12711.80 12711.80 2,79,659.60

Digitally signed by ARTI

17.5 Providing and fixing white vitreous china flat back half stall urinal of -

size 580x380x350 mm with white PVC automatic flushing cistern,

with fittings, standard size C.P. brass flush pipe, spreaders with

unions and clamps (all in C.P. brass) with waste fitting as per IS :

2556, C.I. trap with outlet grating and other couplings in C.P. brass,

including painting of fittings and cutting and making good the walls

and floors wherever required :

17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern each 2.00 12071.75 12071.75 24,143.50

2.28 Surface dressing of the ground including removing vegetation and -

in equalities not exceeding 15 cm deep and disposal of rubbish,

lead up to 50 m and lift up to 1.5 m.

2.4 Supplying and stacking at site dump manure from approved source, -

including carriage upto 5 km lead complete (manure measured in

stacks will be reduced by 8% for payment) :

2.4.3 Screened through sieve of I.S. designation 4.75 mm cum 560.10 319.90 340.15 1,90,518.03

2.8 Spreading of sludge, dump manure and/or good earth in required cum 560.10 52.35 55.66 31,177.30

thickness as per direction of officer-in-charge (cost of sludge, dump

manure and/ or good earth to be paid separately).

Digitally signed by ARTI

16.68 Providing and laying 60mm thick faciory made cement concrete sqm 1991.50 972.00 972.00 19,35,738.00

interlocking paver block of M -30 grade made by block making

machine with strong vibratory compaction, of approved size, design

& shape, laid in required colour and pattern over and including

50mm thick compacted bed of coarse sand, filling the joints with

line sand etc. all complete as per the direction of Engineer-in-

12.1 Providing corrugated G.S. sheet roofing including vertical / curved -

surface fixed with polymer coated J or L hooks, bolts and nuts 8

mm diameter with bitumen and G.I. limpet washers or with G.I.

limpet washers filled with white lead, including a coat of approved

steel primer and two coats of approved paint on overlapping of

sheets complete (up to any pitch in horizontal/ vertical or curved

surfaces), excluding the cost of purlins, rafters and trusses and

including cutting to size and shape wherever required.

12.1.2 0.80 mm thick with zinc coating not less than 275 gm/m² sqm 200.00 1257.55 1257.55 2,51,510.00

10.16.1 Steel work in built up tubular (round, square or rectangular hollow kg 3767.50 194.40 194.40 7,32,402.00

tubes etc.) trusses etc., including cutting, hoisting, fixing in position

and applying a priming coat of approved steel primer, including

welding and bolted with special shaped washers etc. complete.

Hot finished welded type tubes

7.1.1 Random rubble masonry with hard stone in foundation and plinth cum 741.25 7311.25 7311.25 54,19,464.06

levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand

graded stone aggregate 20 mm nominal size) upto plinth level with :

Cement mortar 1:6 (1 cement : 6 coarse sand)

Digitally signed by ARTI

14.1.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area sqm 200.00 547.40 547.40 1,09,480.00

2.5 sq.meters and under, including cutting the patch in proper

raking out joints and preparing and plastering the surface of the

complete, including disposal of rubbish to the dumping ground, all

complete as per direction of Engineer-in-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand)

Digitally signed by ARTI

13.12 18 mm cement plaster in two coats under layer 12 mm thick cement sqm 400.00 537.45 537.45 2,14,980.00

plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick

cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with

13.45.1 Finishing walls with textured exterior paint of required shade : sqm 400.00 223.60 223.60 89,440.00

New work (Two or more coats applied @ 3.28 ltr/10 sqm)

over and including priming coat of exterior primer applied

@ 2.20kg/10 sqm

2.34 Providing & laying Selection no. 1 doob grass turf with earth 50mm Per Sqm 22782.06 87.50 93.04 21,19,614.61

to 60mm thickness of existing ground prepared with proper level

and ramming with required tools wooden and than rolling the

surface with light roller make the surface smoothen and light

watering the same maintenance for 30 days or more till the grass

establish properly,as per direction of officer in charge

13.61.1 Painting with synthetic enamel paint of approved brand and sqm 301.40 155.90 155.90 46,988.26

manufacture to give an even shade : Two or more coats on new

6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of -

class designation 7.5 in foundation and plinth in:

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 8.28 7132.25 7132.25 59,055.03

11.26 Kota stone slab flooring over 20 mm (average) thick base laid over -

and jointed with grey cement slurry mixed with pigment to match the

shade of the slab, including rubbing and polishing complete with

base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Digitally signed by ARTI

15.9 Demolishing stone rubble masonry manually/ by mechanical means -

including stacking of serviceable material and disposal of

unserviceable material within 50 metres lead as per direction of

Engineer-in-charge :

19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse -

sand : 10 graded stone aggregate 40 mm nominal size) all-round

S.W. pipes including bed

concrete as per standard design:

21.1 Providing and fixing aluminium work for doors, windows, ventilators -

and partitions with extruded built up standard tubular sections/

appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

required dia and size, including necessary filling up the gaps at

junctions, i.e. at top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections shall be smooth, rust free,

straight, mitred and jointed mechanically wherever required

including cleat angle, Aluminium snap beading for glazing /

paneling, C.P. brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-in-charge.

(Glazing, paneling and dash fasteners to be paid for separately) :

Powder coated aluminium (minimum thickness of powder coating

21.1.2 For shutters of doors, windows & ventilators including providing and -

fixing hinges/ pivots and making provision for fixing of fittings

wherever required including the cost of EPDM rubber / neoprene

gasket required (Fittings shall be paid for separately)

21.1.2.2 Powder coated aluminium (minimum thickness of powder coating kg 144.00 634.45 634.45 91,360.80

21.3 Providing and fixing glazing in aluminium door, window, ventilator -

shutters and partitions etc. with EPDM rubber / neoprene gasket

etc. complete as per the architectural drawings and the directions of

engineer-in-charge .(Cost of aluminium snap beading shall be paid

in basic item):

Digitally signed by ARTI

21.3.2 With float glass panes of 5 mm thickness (weight not less than sqm 14.40 1505.25 1505.25 21,675.60

9.134.2.2.1 Providing and fixing wire gauge shutters using stainless steel grade sqm 1.58 4692.10 4692.10 7,390.06

304 wire gauge with wire of dia 0.5 mm and average width of

aperture 1.4 mm in both directions for doors, windows and

clerestory windows with necessary screws :

30 mm thick shutters

With ISI marked stainless steel butt hinges of required size

Second class teak wood

8.2 Providing and fixing 18 mm thick gang saw cut, mirror -

polished, premoulded and prepolished, machine cut for kitchen

platforms, vanity counters, window sills, facias and similar

locations of required size, approved shade, colour and texture laid

over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse

sand), joints treated with white cement, mixed with matching

pigment, epoxy touch ups, including rubbing, curing, moulding

and polishing to edges to give high gloss finish etc. complete at all

8.2.3 Granite stone slab of all colour and texture except black, Cherry/ -

8.3 Providing edge moulding to 18 mm thick marble stone -

counters, Vanities etc., including machine polishing to edge to

give high gloss finish etc. complete as per design approved by

Engineer-in-Charge.

8.5 Extra for providing opening of required size & shape for wash basin/ Each 1.00 978.70 978.70 978.70

kitchen sink in kitchen platform, vanity counter and similar location

in marble/ Granite/ stone work, including necessary holes for pillar

taps etc. including moulding, rubbing and polishing of cut edges etc.

9.48 Providing and fixing M.S. grills of required pattern in frames of -

windows etc. with M.S. flats, square or round bars etc. including

priming coat with approved steel primer all complete.

9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc kg 120.00 238.35 238.35 28,602.00

Digitally signed by ARTI

11.5 62 mm thick cement concrete flooring with concrete hardener sqm 2400.00 1056.15 1056.15 25,34,760.00

topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement :

2 coarse sand : 4 graded stone aggregate 20mm nominal size) and

top layer 12mm thick cement hardener consisting of mix 1:2 (1

cement hardener mix : 2 graded stone aggregate, 6mm nominal

size) by volume, hardening compound mixed @ 2 litre per 50 kg of

cement or as per manufacture’s specifications. This includes cost of

cement slurry, but excluding the cost of nosing of steps etc.

11.8 Extra for making chequers of approved pattern on cement concrete sqm 2400.00 83.85 83.85 2,01,240.00

floors, steps, landing, pavements etc.

11.13 Providing and fixing glass strips in joints of terrazo/ cement -

concrete floors.

40 mm wide and 4 mm thick

4.1 Providing and laying in position cement concrete of specified grade -

excluding the cost of centering and shuttering - All work up to plinth

4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural cum 25.00 7294.70 7294.70 1,82,367.50

sources : 6 graded stone aggregate 20 mm nominal size derived

from natural sources)

16.69 Providing and laying at or near ground level factory made kerb cum 8.70 10117.60 10117.60 88,023.12

stone of M-25 grade cement concrete in position to the required

line, level and curvature, jointed with cement mortar 1:3 (1 cement:

3 coarse sand), including making joints with or without grooves

(thickness of joints except at sharp curve shall not to more than

5mm), including making drainage opening wherever required

complete etc. as per direction of Engineer-in-charge (length of

finished kerb edging shall be measured for payment). (Precast C.C.

kerb stone shall be approved by Engineer-in-charge).

15.10.2 Dismantling dressed stone work ashlar face stone work, marble cum 50.00 2877.75 2877.75 1,43,887.50

work or precast concrete work manually/ by mechanical means

including stacking of serviceable and disposal of unserviceable

material within 50 metres lead as per direction of Engineer-in-

In cement mortar

Digitally signed by ARTI

16.1 Preparation and consolidation of sub grade with power road roller of sqm 7050.00 218.90 218.90 15,43,245.00

8 to 12 tonne capacity after excavating earth to an average of 22.5

cm depth, dressing to camber and consolidating with road roller

including making good the undulations etc. and re-rolling the sub

grade and disposal of surplus earthwith lead upto 50 metres.

16.79 Providing, laying, spreading and compacting graded stone cum 1305.00 2914.30 2914.30 38,03,161.50

aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam

(WMM) specification including premixing the material with water at

OMC in for all leads & lifts, laying in uniform layers with mechanical

paverfinisher in sub- base / base course on well prepared surface

and compacting with vibratory roller of 8 to 10 tonne capacity to

achievethe desired density, complete as per specifications and

directions of Engineer-in-Charge.

16.42 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone cum 562.50 7993.80 7993.80 44,96,512.50

aggregate 40 mm nominal size) in pavements, laid to required slope

and camber in panels as required including consolidation finishing

and tamping complete.

16.75 Providing and laying C.C. pavement of mix M-25 with ready mixed cum 843.75 9823.80 9823.80 82,88,831.25

concrete from batching plant. The ready mixed concrete shall be

laid and finished with screed board vibrator , vacuum dewatering

process and finally finished by floating, brooming with wire brush

etc. complete as per specifications and directions of Engineer-

in charge. (The panel shuttering work shall be paid for separately).

(Note:- Cement content considered in this item is @ 330 kg/cum.

Excess/less cement used as per design mix is payable/ recoverable

2.31 Clearing jungle including uprooting of rank vegetation, grass, brush sqm 19375.00 17.60 17.60 3,41,000.00

wood, trees and saplings of girth up to 30 cm measured at a height

of 1 m above ground level and removal of rubbish up to a distance

of 50 m outside the periphery of the area cleared.

Digitally signed by ARTI

23.1.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by Metre 240.00 707.75 707.75 1,69,860.00

suitable method prescribed in IS: 2800 (part I), including collecting

samples from different strata, preparing and submitting strata chart/

bore log, including hire & running charges of all equipments, tools,

plants & machineries required for the job, all complete as per

direction of Engineer -in-charge, up to 90 metre depth below ground

All Types of Soil

23.1.2.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by Metre 120.00 1695.10 1695.10 2,03,412.00

suitable method prescribed in IS: 2800 (part I), including collecting

samples from different strata, preparing and submitting strata chart/

bore log, including hire & running charges of all equipments, tools,

plants & machineries required for the job, all complete as per

direction of Engineer -in-charge, up to 90 metre depth below ground

Rocky strata including Boulders

23.3.3 Supplying, assembling, lowering and fixing in vertical position in Metre 120.00 1113.35 1113.35 1,33,602.00

bore well, unplasticized PVC medium well casing (CM) pipe of

required dia, conforming to IS: 12818, including required hire and

labour charges, fittings & accessories etc. all complete, for all

depths, as per direction of Engineer-in-charge.

200 mm nominal size dia

23.4.3 Supplying, assembling, lowering and fixing in vertical position in Metre 80.00 1255.70 1255.70 1,00,456.00

bore well unplasticized PVC medium well screen (RMS) pipes with

ribs, conforming to IS: 12818, including hire & labour charges,

fittings & accessories etc. all complete, for all depths, as per

direction of Engineer-in-charge.

200 mm nominal size dia

23.13.3 Providing and fixing suitable size threaded mild steel cap or spot Each 2.00 321.15 321.15 642.30

welded plate to the top of bore well housing/ casing pipe,

removable as per requirement, all complete for borewell of:

23.15.3 Providing and fixing Bail plug/ Bottom plug of required dia to the Each 2.00 357.60 357.60 715.20

bottom of pipe assembly of tubewell as per IS:2800 (part I).

Digitally signed by ARTI

19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. -

pipes with collars jointed with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand) including testing of joints

etc. complete :

4.3.1 Centering and shuttering including strutting, propping etc. and sqm 172.50 392.15 392.15 67,645.88

removal of form work for :

Foundations, footings, bases for columns

16.70.1 Providing and fixing G.I. chain link fabric fencing of required width in sqm 1380.00 1017.80 1017.80 14,04,564.00

mesh size 50x50 mm including strengthening with 2 mm dia wire or

nuts, bolts and washers as required complete as per the direction of

Engineer-in-charge. Made of G.I. wire of dia 4 mm

11.41 Providing and laying vitrified floor tiles in different sizes (thickness -

specified by the manufacturer) with water absorption less than

and conforming to IS: 15622, of approved make, in all colours and

laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),

jointing with grey cement slurry @ 3.3 kg/ sqm including grouting

joints with white cement and matching pigments etc., complete.

16.11 Dry stone pitching 22.5 cm thick including supply of stones and Sqm 2695.00 883.15 883.15 23,80,089.25

preparing surface complete.

Digitally signed by ARTI

11.46 Providing and laying Vitrified tiles in different sizes (thickness to be -

specified by manufacturer), with water absorption less than 0.08 %

conforming to I.S. 15622, of approved make, in all colours & shade,

skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3

cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/

sqm including grouting the joint with white cement & matching

12.1.2 Providing corrugated G.S. sheet roofing including vertical / curved -

surface fixed with polymer coated J or L hooks, bolts and nuts 8

mm diameter with bitumen and G.I. limpet washers or with G.I.

limpet washers filled with white lead, including a coat of approved

steel primer and two coats of approved paint on overlapping of

sheets complete (up to any pitch in horizontal/ vertical or curved

surfaces), excluding the cost of purlins, rafters and trusses and

including cutting to size and shape wherever required.

0.80 mm thick with zinc coating not less than 275 gm/m² sqm 440.00 1257.55 1257.55 5,53,322.00

0052 Providing Front end loader machine for earthwork and hours 350.00 1987.33 1987.33 6,95,565.50

Derived miscellaneous works complete in all respect.

0124 Supply of manpower such as helper, Mate, painter, Mason (2nd day 350.00 1118.39 1118.39 3,91,436.50

Derived class) etc. as per the requirement of client

Total Schedule work 783,32,662.80

CPWD Description Rate (Rs) Amount( Rs )

DSR Item Unit Total Qty

Non schedule items

Digitally signed by ARTI

NS-1 Providing and fixing floor Door buffer of minimum 75 mm length, each 12 72.00 72.00 864.00

required colour and shade, made of PVC/rubber, with necessary

screws/fittings etc. complete in all respect as approved by engineer

NS-2 Providing and fixing wooden moulded corner beading / Taj Beading Metre 59.85 166.00 166.00 9,935.10

of 2nd class teak wood 35x5 mm (base and height) to the junction

of panelling or b/w door frame and wall . with iron screws, plugs and

priming coat on unexposed surface. paint etc .

NS-3 Providing and fixing chrome plated grating with ring and two S.S Each 28 346.00 346.00 9,688.00

screws of approved design with grating screwed down to the ring

with s/s screws and embedding and setting ring into the floor with

cement mortar .(As per approved make or equivalent)

NS-4 Providing, fixing, jointing and testing in position the following uPVC -

pipes conforming to IS 4985 of 6 kg/sqcm pressure rating including

all fittings, solvent weld joints, testing complete for drainage system

cut to required length to be laid under floor and making good the

same complete as

For waste pipes -

NS-5 Providing and fixing uPVC pipes type -B conforming to IS: 13592 -

for soil, waste and vent pipes including all fittings rubber ring type

(plain or with access door) e.g. bends, junctions, cowls, offsets,

access pieces, jointing with rubber ring joints with lubricant etc.

fixed with clamps to walls.

For soil, waste and vent pipes -

NS-6 Providing and fixing under counter wash basin , 15 mm C.P. brass Each 1 3,948.12 3,948.12 3,948.12

pillar taps,including painting of fittings and brackets, cutting and

making good excluding cost of civil works wherever required

complete in all respect as per direction of engineer in charge

Digitally signed by ARTI

NS-7 Supply & Fixing Benches made of Cast Iron side legs as per Each 40 34,264.00 34,264.00 13,70,560.00

manufactures standard having hand rests on both sides,as per

approved design,Blade and seating made of MS strips cladded

with FRPS in wood/as desired finish good for all season shall be

supplied at side ready to use condition. No denting/painting /priming

or assembly etc. shall be allowed at site. minimum length of bench

5 feet suitable for 3 persons.

NS-8 Providing & Fixing India Mark II open top cylinder Handpump of Each 2 27,685.51 27,685.51 55,371.02

maximum lift 45m (depth) and 32 mm GI cylinder size. The pump

cylinder is of cast iron / brass, plunger and foot valve of brass

made. This pump is not corrosion resistant and should not be used

in aggressive water (pH value < 6.5), complete in all respect

NS-9 Manufacturing, supplying and fixing retro reflective sign boards sqm 30 7,060.00 7,060.00 2,11,800.00

made up of 2 mm thick aluminium sheet, face to be fully covered

with high intensity encapsulated type heat activated retro reflective

sheeting conforming to type - IV of ASTM-D 4956-01 in blue and

silver white or other colour combination including subject matter,

message (bi-lingual), symbols and borders etc. as per IRC ;

67:2001, pasted on substrate by an adhesive backing which shall

be activated by applying heat and pressure conforming to class -2

of ASTM-D-4956-01 and fixing the same with suitable sized

aluminium alloy rivets @ 20 cm c/c to back support frame of SS

frame at the top & bottom end and including making holes in pipes,

angles flats, providing & fixing SS message plate of required size of

approved brand & manufacture complete as per drawing ,

specification and direction of Engineer-in-charge.

Rate shall include the Mandatory/ Regulatory sign boards with all

fittings etc. but exclude frame, grouting the same at ground etc.

NS-10 Providing and fixing Stainless Steel name plate of minimum 1.2 sqinch 30000 28.78 28.78 8,63,400.00

mm thick, with complete fittings and fixtures. All letters shall be

encripted with approved letters/words and colour. Sample shall be

got approved from the authority before procurement

Digitally signed by ARTI

NS-11 Providing and applying fibre reinforced elastomeric liquid sqm 1120 865.17 865.17 9,68,990.40

waterproofing membrane with resilient acrylic polymers having Sun

Reflectivity Index (SRI) of 105 on top of concrete roof in three coats

@ 1.5 ltr/ sq.mtr One coat of self-priming of elastomeric

waterproofing liquid (dilution with water in the ratio of 3:1) and two

coats of undiluted elastomeric waterproofing liquid (dry film

thickness of complete application/system not less than 700

microns). The operation shall be carried out after scrapping and

properly cleaning the surface to remove loose particles with wire

brushes, complete in all respect as per the direction of Engineer-in-

NS-12 Providing and fixing of APP bitumen membrane of 3mm thickness sqm 530 1,661.13 1,661.13 8,80,398.90

on roof sheet with hot application of tar coal for complete water

proofing colution as per the direction of Engineer in charge

Digitally signed by ARTI

NS-13 Construction of Gazeebo/ student-staff cafeteria as per indicative sqm 184 29,277.43 29,277.43 53,87,047.31

image/ as desired by client/EIC complete in all respect of Civil,

electrical and Plumbing work as per technical specification and

direction of Engineer in charge. Note: the contractor shall submit

the structural and other drawings for approval prior to start the work

NS-14 Providing and fixing SS sliding door bolts as per approved makes -

with necessary fittings complete in all respect as per direction of

Engineer-in-charge

NS-15 Providing and fixing SS handles chrome finished, ISI marked, with -

necessary screws etc. complete :

NS-16 Diluting and injecting Weedicide or Systemic Herbicide using sqm 19375 7.61 7.61 1,47,443.75

Ammonium Salt of Glyphosate 71% SG by mixing 100mg salt in 15

litre water by spraying on ground as per direction of EIC.

NS-17 Mowing of existing mexican turf, Removal and stacking of the same sqm 3500 83.06 83.06 2,90,710.00

in roll form, levelling the ground by filling earth, manure etc. and

relaying of mexican turf rolls on the same ground, proper watering

the same for 30 days and atlest one mowing by lawn movers

complete in all respect as per direction of EIC

NS-18 SITC of spectroradiometer of spectral range 280-1900nm, as per Each 1 65,34,599.00 65,34,599.00 65,34,599.00

technical specification complete in all respect as per direction of

SITC of Walk in chiller Cold module room for storage of Germplasm 1 job 1 46,25,673.80 46,25,673.80 46,25,673.80

of size 17ft x 25ft x 8ft (204" x 300" x 96") for capacity of 15000 to

18000 Box (250g) germplasm , RH % 15% to 25%, made up of

60mm thick puf panel walls and flooring as per technical

specifications and direction of EIC. (excluding cost of dehumidifier).

SITC of Desiccant Dehumidifier (2500) CFM 1 job 1 40,50,034.40 40,50,034.40 40,50,034.40

capacity with chiller for DHU for Cold module room for storage of

Germplasm of size 17ft x 25ft x 8ft , RH % 15% to 25%, as per

technical specifications and direction of EIC.

Digitally signed by ARTI

Total Non schedule items 255,80,659.56

TOTAL AMOUNT 1039,13,322.36

TOTAL AMOUNT 1039,13,322.36

Digitally signed by ARTI

“External development and other Misc works horticulture & landscaping works, Construction of small building, SITC of different equipment/machineries,

external electrical works for RLBCAU at Jhansi UP.”

BILL OF QUNATITIES FOR ELECTRICAL WORKS (INTERNAL AND EXTERNAL ELECTRICAL)

DSR-22EM Description of Item Enhanced rate

I.No. Unit Quantity Rate (Rs) Amount(Rs)

Code with 18% GST

Sub-Head : WIRING

10 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single

core cable in surface / recessed medium class PVC conduit, with

modular switch, modular plate, suitable Gl box and earthing the

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable etc. as required.

11 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC Point 50.00 1562.00 1,660.87 83,043.50

insulated copper conductor single core cable in surface /

recessed medium class PVC conduit, 2 way modular switch,

modular plate, suitable Gl box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable

etc. as required.

14 1.14 Wiring for circuit/ submain wiring along with earth wire with the -

following sizes of FRLS PVC insulated copper conductor, single

core cable in surface/ recessed medium class PVC conduit as

21 1.21 Supplying and fixing of following sizes of medium class PVC -

conduit along with accessories in surface/recess including cutting

the wall and making good the same in case of recessed conduit

24 1.24 Supplying and fixing following modular switch/ socket on the -

existing modular plate & switch box including connections but

excluding modular plate etc. as required.

Digitally signed by ARTI

25 1.25 Supplying and fixing two module stepped type electronic fan Each 10.00 369.00 392.36 3,923.60

regulator on the existing modular plate switch box including

connections but excluding modular plate etc. as required.

26 1.26 Supplying and fixing modular blanking plate on the existing Each 1.00 40.00 42.53 42.53

modular plate & switch box excluding modular plate as required.

27 Supplying and fixing following size/ modules, Gl box along with -

modular base & cover plate for modular switches in recess etc.

28 Supplying and fixing following Modular base & cover plate on -

existing modular metal boxes etc. as required.

31 1.31 Supplying and fixing suitable size Gl box with modular plate and Each 25.00 477.00 507.19 12,679.75

cover in front on surface or in recess, including providing and

fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch,

connections etc. as required.

32 1.32 Supplying and fixing suitable size Gl box with modular plate and Each 10.00 586.00 623.09 6,230.90

cover in front on surface or in recess, including providing and

fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A

modular switch, connections etc. as required.

33 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing Each 5.00 87.00 92.51 462.55

junction box/ wooden block including connections etc. as

34 1.35 Installation, testing and commissioning of wall bracket / ceiling 126.53 632.65

fittings of all sizes and shapes containing upto two

GLS/CFL/LED lamps per fitting complete with all accessories

including connections etc. as

required Each 5 119

37 1.38 Supplying and fixing call bell/ buzzer suitable for single phase, V, Each 1.00 99.00 105.27 105.27

complete as required.

39 1.40 Providing and fixing plain 16/0.20mm (0.50sqmm) twin circular Metre 120.00 40.00 42.53 5,103.60

flexible FRLS PVC insulated, PVC sheathed copper conductor

cable direct on the wall with PVC clips etc. as required.

Digitally signed by ARTI

40 1.41 Installation, testing and commissioning of pre-wired, fluorescent Each 1.00 206.00 219.04 219.04

fitting / compact fluorescent fitting of all types, complete with all

accessories and tube/lamp etc. directly on ceiling/ wall, including

connections with 1.5 sq. mm FRLS PVC insulated, copper

conductor, single core cable and earthing etc. as required.

42 1.43 Providing and fixing extra conduit down rod of 20 mm dia, 2 X 10 Each 1.00 55.00 58.48 58.48

cm length, wiring with 2 X 1.5 sq. mm FRLS PVC insulated,

copper conductor, single core cable including painting etc. as

required. (Note : More than 5 cm length shall be rounded to the

nearest 10 cm and 5 cm or less shall be ignored)

43 1.44 Installation, testing and commissioning of ceiling fan, including Each 1.00 213.00 226.48 226.48

wiring the down rods of standard length (up to 30 cm) with 1.5 sq.

mm FRLS PVC insulated, copper conductor, single core cable

etc. as required.

44 1.45 Installation, testing and commissioning of ceiling fan, including Each 1.00 339.00 360.46 360.46

wiring the down rods of standard length (up to 30 cm) with 1.5 sq.

mm FRLS PVC insulated, copper conductor, single core cable,

including providing and fixing phenolic laminated sheet cover on

the fan box etc. as required.

45 1.47 Supplying and fixing extra down rod of 10 cm length G.l. pipe ,15 Each 1.00 46.00 48.91 48.91

mm dia, heavy gauge including painting etc. as required. (Note

More than 5 cm length shall be rounded to the nearest 10 cm and

5 cm or less shall be ignored)

46 1.48 Supplying and fixing extra conduit down rod of 20 cm length G.l. Each 1.00 52.00 55.29 55.29

pipe 15 mm dia, heavy gauge including painting etc. as required.

(Note : More than 5 cm length shall be rounded to the nearest 10

cm and 5 cm or less shall be ignored)

47 1.49 Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as Each 1.00 57.00 60.61 60.61

48 Installation of exhaust fan in the existing opening, including -

making good the damage, connection, testing, commissioning

etc. as required.

49 1.51 Extra for fixing the louvers/ shutters complete with frame for a Each 6.00 207.00 220.10 1,320.60

exhaust fan of all sizes.

50 1.52 Painting of ceiling fan in installed position with one or more coats Each 5.00 154.00 163.75 818.75

of spray painting with synthetic enamel paint of approved brand

and manufacture to give an even shade, including cleaning of

surface with detergent etc. as required.

Digitally signed by ARTI

51 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the -

existing surface/ recessed Steel/ PVC conduit as required.

53 Wiring for group controlled (looped) light point/fan point/exhaust -

fan point/ call bell point (without independent switch etc.) with 1.5

sq. mm FRLS PVC insulated copper conductor single core cable

in surface/ recessed PVC conduit, and earthing the point with 1.5

sq. mm FRLS PVC insulated copper conductor single core cable

etc. as required.

54 1.56 Supplying and fixing suitable size Gl box with modular plate and Each 25.00 676.00 718.79 17,969.75

cover in front on surface or in recess, including providing and

fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A

modular switch, connections etc. as required. (For light plugs to

be used in non residential buildings).

55 1.57 Supplying & fixing suitable size Gl box with modular plate and Each 5.00 727.00 773.02 3,865.10

cover in fronton surface or in recess including providing and fixing

25 A modular socket outlet and 25 A modular SP MCB, "C" curve

including connections, painting etc. as required.

Sub-Head : MCCB, MCB & OB'S -

60 Supplying and fixing following way, single pole and neutral, sheet -

steel, MCB distribution board, 240 V, on surface/ recess,

complete with tinned copper bus bar, neutral bus bar, earth bar,

din bar, interconnections, powder painted including earthing etc.

as required. (But without MCB/RCCB/lsolator)

61 Supplying and fixing following way, horizontal type three pole and -

neutral, sheet steel, MCB distribution board, 415 V, on surface/

recess, complete with tinned copper bus bar, neutral bus bar,

earth bar, din bar, interconnections, powder painted including

earthing etc. as required. (But without MCB/RCCB/lsolator)

Digitally signed by ARTI

63 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" -

curve, miniature circuit breaker suitable for inductive load of

following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

64 2.11 Supplying and fixing single pole blanking plate in the existing Each 1.00 13.00 13.82 13.82

MCB DB complete etc. as required.

65 Supplying and fixing following rating, double pole, the existing -

MCB DB complete with connections, testing and commissioning

etc. as required.

66 Supplying and fixing following rating, four pole, 415 V, isolator in -

the existing MCB DB complete with connections, testing and

commissioning etc. as required.

67 Supplying and fixing following rating, double pole, (single phase -

and neutral), 240 V, residual current circuit breaker (RCCB),

having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as

69 2.16 Supplying and fixing DP sheet steel enclosure on surface/ recess Each 5.00 1169.00 1,243.00 6,215.00

along with 25/32 A 240 V "C" curve DP MCB complete with

connections, testing and commissioning etc. as required.

70 2.17 Supplying and fixing TP sheet steel enclosure on surface/ recess Each 15.00 1592.00 1,692.77 25,391.55

along with 16/25/32 A 415 V "C" curve TP MCB complete with

connections, testing and commissioning etc. as required.

73 2.20 Supplying and fixing 30 A, 415 V, TPN Industrial type socket Each 2.00 4107.00 4,366.97 8,733.94

outlet, with 4 pole and earth, metal enclosed plug top along with

30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in

recess, with chained metal cover for the socket out let and

complete with connections, testing and commissioning etc. as

Digitally signed by ARTI

74 2.21 Providing and fixing M.V. danger notice plate of 200 mm X 150 Each 2.00 269.00 286.03 572.06

mm, made of mild steel, at least 2 mm thick, and vitreous

enameled white on both sides, and with inscription in single red

colour on front side as required.

75 2.22 Providing and fixing H.T. danger notice plate of 250 mm X 200 Each 5.00 292.00 310.48 1,552.40

mm, made of mild steel, at least 2 mm thick, and vitreous

enameled white on both sides, and with inscription in single red

colour on front side as required.

76 Supplying and fixing Cable End Box (Loose Wire Box) suitable -

for following single pole and neutral, sheet steel, MCB distribution

board, 240 Volts, on surface/ recess, complete with testing and

commissioning etc. as required.

b) 2.23.2 For 8 way, Double door SPN MCBDB Each 5.00 832.00 884.67 4,423.35

77 Supplying and fixing Cable End Box (Loose Wire Box) suitable -

for following triple pole and neutral, sheet steel, MCB distribution

board, 415 Volts, on surface/ recess, complete with testing and

commissioning etc.as required.

c) 2.24.3 For 8 way, Double door TPN MCBDB Each 2.00 1340.00 1,424.82 2,849.64

Sub-Head : CABLE TRAYS -

96 Supplying and installing following size of perforated Hot Dipped -

Galvanised Iron cable tray (Galvanisation thickness not less than

50 microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

G.l. suspenders including G.l. bolts & nuts, etc. as required.

d) 4.6.4 300 mm width X 50 mm depth X 1.6 mm thickness Metre 120.00 963.00 1,023.96 1,22,875.20

97 Supplying and installing following size of perforated Hot Dipped -

Galvanised Iron cable tray "bends" (Galvanisation not less than

50 microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

G.l. suspenders including G.l. bolts & nuts, etc. as required.

d) 4.7.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 2.00 1852.00 1,969.23 3,938.46

98 Supplying and installing following size of perforated Hot Dipped -

Galvanised Iron cable tray "Tee" (Galvanisation not less than 50

microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

G.l. suspenders including G.l. bolts & nuts, etc. as required.

d) 4.8.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 3.00 2156.00 2,292.47 6,877.41

Digitally signed by ARTI

99 Supplying and installing following size of perforated Hot Dipped -

Galvanised Iron cable tray "Cross member" (Galvanisation not

less than 50 microns) with perforation not more than 17.5%, in

convenient sections, joined with connectors, suspended from the

ceiling with G.l. suspenders including G.l. bolts & nuts, etc as

d) 4.9.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 1.00 2366.00 2,515.77 2,515.77

100 Supplying and installing following size of perforated Hot Dipped -

Galvanised Iron cable tray "Reducer" (Galvanisation not less than

50 microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

G.l. suspenders including G.l. bolts & nuts, etc as required.

d) 4.10.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 1.00 2823.00 3,001.70 3,001.70

Sub-Head : EARTHING -

102 5.2 Earthing with G.l. earth pipe 4.5 metre long, 40 mm dia including Each 10.00 6855.00 7,288.92 72,889.20

accessories, and providing masonry enclosure with cover plate

having locking arrangement and watering pipe etc. with charcoal/

coke and salt as required.

104 5.4 Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick Set 10.00 7472.00 7,944.98 79,449.80

including accessories, and providing masonry enclosure with

cover plate having locking arrangement and watering pipe of 2.7

metre long etc. with charcoal/ coke and salt as required.

106 5.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick Set 4.00 13838.00 14,713.95 58,855.80

including accessories, and providing masonry enclosure with

cover plate having locking arrangement and watering pipe of 2.7

metre long etc. with charcoal/ coke and salt as required.

107 5.7 Supplying and laying 6 SWG G.l. wire at 0.50 metre below Metre 10.00 51.00 54.23 542.30

ground level for conductor earth electrode, including connection/

termination with Gl thimble etc. as required.

108 5.8 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre Metre 12.00 972.00 1,033.53 12,402.36

below ground as strip earth electrode, including connection/

terminating with nut, bolt, spring, washer etc. as required.

(Jointing shall be done by overlapping and with 2 sets of brass

nut bolt & spring washer spaced at 50mm)

109 5.9 Supplying and laying 25 mm X 5 mm G.l. strip at 0.50 metre Metre 30.00 144.00 153.12 4,593.60

below ground as strip earth electrode, including connection/

terminating with G.l. nut, bolt, spring, washer etc. as required.

(Jointing shall be done by overlapping and with 2 sets of G.l. nut

bolt & spring washer spaced at 50mm)

Digitally signed by ARTI

110 5.10 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia Metre 10.00 1551.00 1,649.18 16,491.80

G.l. pipe from earth electrode including connection with brass nut,

bolt, spring, washer excavation and re-filling etc. as required.

111 5.11 Providing and fixing 25 mm X 5 mm G.l. strip in 40 mm dia G.l. Metre 10.00 706.00 750.69 7,506.90

pipe from earth electrode including connection with G.l. nut, bolt,

spring, washer excavation and re-filling etc. as required.

112 5.12 Providing and laying earth connection from earth electrode with 6 Metre 10.00 287.00 305.17 3,051.70

SWG dia G.l. Wire in 15 mm dia G.l. pipe from earth electrode

including connection with G.l. thimble excavation and re-filling as

113 5.13 Providing and laying earth connection from earth electrode with Metre 10.00 369.00 392.36 3,923.60

4.00 mm dia copper wire in 15 mm dia G.l. pipe from earth

electrode including connection with copper thimble excavation

and re-filling as required.

114 5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in Metre 1.00 1162.00 1,235.55 1,235.55

recess for connections etc. as required.

115 5.15 Providing and fixing 25 mm X 5 mm G.l. strip on surface or in Metre 1.00 244.00 259.45 259.45

recess for connections etc. as required.

116 5.16 Providing and fixing 6 SWG dia G.l. wire on surface or in recess Metre 1.00 70.00 74.43 74.43

for loop earthing as required.

117 5.17 Providing and fixing recess for loop earthing as required. Metre 1.00 155.00 164.81 164.81

118 5.18 Providing and fixing 6 SWG dia G.l. wire on surface or in recess Metre 1.00 42.00 44.66 44.66

for loop earthing along with existing surface/ recessed conduit/

submain wiring/ cable as required.

119 5.19 Providing and fixing 4.00 mm dia copper wire on surface or in Metre 1.00 127.00 135.04 135.04

recess for loop earthing along with existing surface/ recessed

conduit/submain wiring/cable as required.

120 5.20 Providing and fixing earth bus of 50 mm X 5 mm copper strip on Metre 1.00 2113.00 2,246.75 2,246.75

surface for connections etc. as required.

Sub-Head : LIGHTNING CONDUCTOR -

121 6.2 Providing and fixing of lightning conductor finial, made of 25 mm Each 5.00 518.00 550.79 2,753.95

dia 300 mm long, G.l. tube, having single prong at top, with 85

mm dia 6 mm thick G.l. base plate including holes etc. complete

122 6.3 Fixing of lightning conductor finial (single prong) with base plate Each 2.00 360.00 382.79 765.58

including holes etc. complete as required.

123 6.4 Jointing copper / G.l. tape (with another copper/ G I tape, base of Each 2.00 113.00 120.15 240.30

the finial or any other metallic object) by riveting / nut bolting/

sweating and soldering etc as required.

124 6.7 Providing and fixing G.l. tape 20 mm X 3 mm thick on parapet or Metre 50.00 126.00 133.98 6,699.00

surface of wall for lightning conductor complete as required.(For

horizontal run)

Digitally signed by ARTI

125 6.8 Providing and fixing G.l. tape 20 mm X 3 mm thick on parapet or Metre 150.00 197.00 209.47 31,420.50

surface of wall for lightning conductor complete as required.(For

128 6.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick Each 1.00 121.00 128.66 128.66

G.l. strip, 125 mm long, with 4 nos. of G.l. bolts, nuts, chuck nuts

and spring washers etc. complete as required.

129 6.14 Providing and laying G.l. tape 32 mm X 6 mm from earth Metre 1.00 195.00 207.34 207.34

electrode directly in ground as required.

Sub-Head : MV CABLE LAYING -

131 Laying of one number PVC insulated and PVC sheathed / XLPE -

power cable of 1.1 KV grade of following size direct in ground

including excavation, sand cushioning, protective covering and

refilling the trench etc as required.

132 Laying of one number additional PVC insulated and PVC -

sheathed / XLPE power cable of 1.1 KV grade of following size

direct in ground in the same trench in one tier horizontal

formation including excavation, sand cushioning, protective

covering and refilling the trench etc as required.

135 Laying of one number PVC insulated and PVC sheathed / XLPE -

power cable of 1.1 KV grade of following size in the existing

RCC/ HUME/ METAL pipe as required.

b) 7.5.2 Above 35 sq. mm and up to 95 sq. mm Metre 40.00 57.00 60.61 2,424.40

c) 7.5.3 Above 95 sq. mm and up to 185 sq. mm Metre 10.00 77.00 81.87 818.70

136 Laying of one number PVC insulated and PVC sheathed / XLPE -

power cable of 1.1 KV grade of following size in the existing

masonry open duct as required.

b) 7.6.2 Above 35 sq. mm and up to 95 sq. mm Metre 100.00 45.00 47.85 4,785.00

138 Laying and fixing of one number PVC insulated and PVC -

sheathed / XLPE power cable of 1.1 KV grade of following size

on cable tray as required.

a) 7.8.1 Up to 35 sq. mm (clamped with 1mm thick saddle) Metre 250.00 45.00 47.85 11,962.50

Digitally signed by ARTI

b) 7.8.2 Above 35 sq. mm and up to 95 sq. mm (clamped with 25x3mm Metre 50.00 92.00 97.82 4,891.00

c) 7.8.3 Above 95 sq. mm and up to 185 sq. mm (clamped with Metre 50.00 115.00 122.28 6,114.00

25/40x3mm MS flat clamp)

d) 7.8.4 Above 185 sq. mm and up to 400 sq. mm (clamped with 40x3mm Metre 10.00 185.00 196.71 1,967.10

139 7.9 Supplying and making cable route marker with cement concrete Each 50.00 585.00 622.03 31,101.50

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size ) of size 60 cm X 60 cm at the bottom and 50

cm X 50 cm at the top with a thickness of 10cm including

inscription duly engraved as required.

Sub-Head : HT CABLE LAYING -

143 Laying of one number PVC insulated and PVC sheathed / XLPE -

power cable of 11 KV grade of following size in the existing RCC/

HUME/ METAL pipe as required.

144 Laying of one number PVC insulated and PVC sheathed / XLPE -

power cable of 11 KV grade of following size in the existing

masonry open duct as required.

Sub-Head : MV CABLE JOINTING & END TERMINATION -

149 Supplying and making end termination with brass compression -

gland and aluminium lugs for following size of PVC insulated and

PVC sheathed / XLPE aluminium conductor cable of 1.1 KV

grade as required.

152 Supplying and making straight through joint with heat shrinkable -

kit including ferrules and other jointing materials for following size

of PVC insulated and PVC sheathed / XLPE aluminium

conductor cable of 1.1 KV grade as required.

Digitally signed by ARTI

Sub-Head : HV CABLE JOINTING & END TERMINATION -

156 supplying and making indoor cable end termination with heat -

shrinkable jointing kit complete with all accessories including lugs

suitable for following size of 3 core, XLPE aluminium conductor

cable of 11 KV grade as required:

157 Supplying and making outdoor cable end termination with heat -

shrinkable jointing kit complete with all accessories including lugs

suitable for following size of 3 core, XLPE aluminium conductor

cable of 11 KV grade as required:

158 Supplying and making straight through cable jointing with heat -

shrinkable jointing kit complete with all accessories including

ferrules suitable for following size of 3 core, XLPE aluminium

conductor cable of 11 KV grade as required:

Sub-Head : MISC. CIVIL ITEMS -

244 Providing, laying and fixing following dia RCC pipe NP2 class -

light duty) in ground complete with RCC collars, jointing with

cement mortar 1:2 (1 cement: 2 fine sand) including trenching (75

cm deep) and refilling etc as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along -

with all accessories like socket, bend, couplers etc. conforming to IS

14930, Part II complete with fitting and cutting, jointing etc. in the

existing trench,complete as required.

246 Supplying and laying of following size DWC HDPE pipe ISI -

marked along with all accessories like socket, bend, couplers etc.

conforming to IS 14930, Part II complete with fitting and cutting,

jointing etc. direct in ground (75 cm below ground level) including

excavation and refilling the trench but excluding sand cushioning

and protective covering etc., complete as required.

Sub-Head : Ceiling Fan with BLDC Motor -

Digitally signed by ARTI

311 19.1 Supply, Installation, Testing and Commissioning of 1200 mm Each 10.00 2730.00 2,902.81 29,028.10

sweep, BEE 5 star rated, ceiling fan with Brush Less Direct

Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30

cm long down rod, 2 nos. canopies, shackle kit, safety rope,

copper winding, Power Factor not less than 0.9, Service Value

(CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min ,

350 RPM (tolerance as per IS : 374-2019), THD less than 10%,

remote or electronic regulator unit for speed control and all

remaining accessories including safety pin, nut bolts, washers,

temperature rise=75 degree C (max.), insulation resistance more

than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC

Supply, earthing etc. complete as required.

Sub-Head : SOLAR PHOTOVOLTAIC POWER PLANT -

1 Supply, Installation, Testing and Commissioning of ongrid Solar

Photovoltaic Power Plant conforming to MNRE specifications as

amended, consisting of Mono/Poly Crystalline silicon solar cells, net

metering facility, necessary protections, earthing, mounted on

Aluminium/GI structure of suitable strength with following

components complete as required:- a) Solar Photovoltaic Module of

capacity 330 Wp or above, manufactured in India, conforming to IS

14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar

Photovoltaic Module conversion efficiency shall not be less than

16.5%. PV modules used in solar power plants/ systems must be

warranted for their output peak watt capacity, which should not be

less than 90% at the end of 10 years and 80% at the end of 25 years. b)

Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range

and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage kWp 20.00 61060.00 64,925.10 12,98,502.00

suitable to generate AC Power with efficiency not less than 97%, total

harmonic distortion less than 3% and suitable for ambient temperature

from 0 to 50 degree C. The PCU shall adjust the voltage and frequency

level to suit the Grid Voltage Frequency. c) Data Monitoring System

complete with accessories. d) Fixing of Array junction box & Main

junction box with IP 65 protection and termination arrangement for

incoming and outgoing cable along with glands, lugs and other

accessories etc. as required. e) Lightning and surge voltage protection.

f) Connections & Interconnections by supplying & fixing required size

XLPE insulated copper conductor 1.1 kV grade armoured power and

control cables between solar modules, main power cable to grid supply

PCU unit along with supplying & fixing of necessary channel/conduit

lugs and other accessories etc. as required.

Digitally signed by ARTI

Total Schedule work 47,99,236.05

Sr. CPWD DSR Description Total

Unit Rate (Rs) Amount( Rs )

No. Item no Qty

Sub-Head -SUPPLY OF HT & MV CABLE WORK

1.0 NS-1 Supply of HT cable

Supplying of following sizes of XLPE aluminium conductor, corss

linked polythylene, individual core screwed, flat steel strip

1.1 armoured, PVC sheathed cable of 11KV grade (earthed)

comforming to IS: 7098 (Part 2),with uptodate ammendment

complete as required.

3 C x 240 Sq.mm XLPE HT cable (Earthed) mtr 1,600.00 2,692.00 2,692.00 43,07,200.00

2.0 Supply of MV cable

Supply, following sizes of PVC sheathed PVC/XLPE insulated

NS-2 Aluminium conductor/copper conductor power/ multicore control

armoured cable of 1.1 KV grade.

Sub-head - panels

Supply, installation, testing and commissioning of front operated,

front access, totally enclosed, free standing, dust and vermin

proof Panel with IP65 ingress protection, fabricated from 2 mm

thick CRCA sheets, with hinged, gasketted and lockable doors

including the cost of interconnections, copper crimping lugs,

brass glands, bonding to earth and painting, suitable for use at

415 volts, 3 phase 4 wire 50 Hz system with 31 MVA rupturing

capacity at 415 volts complete as per specifications, as required

3.1 NS-3.1 Main External Lighting panel (IP-65)

1 No. 160 amps 4P MCCB (25 KA) with thermal Magnetic release

(PRMB-3) with Class-C transient voltage surge suppression

device suitable for 3 phases as per specifications.

B METERING & INDICATION

Digitally signed by ARTI

i) 1 set of R,Y,B phase indicating lamps

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP

iii) 1 No. (0-160A) Ammeter with ASS with 3 nos. 160/5A CT's

iv) 1 No. Digital Electronic KWH meter(Dual Source).

Digitally signed by ARTI

1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC

i) 8 Nos. 63A TP+NL MCCB (25 KA)

Main External Lighting panel (IP-65) as described above 2,30,000.00

3.2 NS-3.2 Sub External lighting Feeder piller

1 No. 63A,4P MCCB (25kA) and ON/OFF indicating lamps.

1 No. 63A, 3 phase Timer Switch for automatic operation.

B METERING & INDICATION

i) 1 set of R,Y,B phase indicating lamps.

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP

1 No. (0-160A) Ammeter with ASS with 3 nos. 160/5A CT's.

1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC

Ten(10) nos 25 Amp 4P MCB, 10 KA.

Sub External lighting Feeder piller described as above 1,75,000.00

3.3 NS-3.3 Feeder Pileer-1 (IP-65)

1 No. 160 amps 4P MCCB (25 KA) with thermal Magnetic release

(PRMB-3) with Class-C transient voltage surge suppression

device suitable for 3 phases as per specifications.

B METERING & INDICATION

i) 1 set of R,Y,B phase indicating lamps

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP

iii) 1 No. (0-160A) Ammeter with ASS with 3 nos. 160/5A CT's

iv) 1 No. Digital Electronic KWH meter(Dual Source).

1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC

Digitally signed by ARTI

i) 3 Nos. 100A TP+NL MCCB (25 KA)

Feeder Pileer-1 (IP-65) as described above Set 3.00 1,50,000.00 1,50,000.00 4,50,000.00

Supply of 80W LED floodlight luminaire for building highlighter. 14,925.00

Sub-Head - XVI- EXTERNAL VIDEO SURVEILLANCE

SYSTEM (IP CCTV)

Supply, installation, testing and commissioning of 2 megapixels 43,089.00

resolution Network Bullet camera camera,Imager 1/2.8”

Progressive Scan CMOS,Video Compression.

.H.264/MJPEG,Day/Night-IR Cut Filter,Minimum Illumination-

0Lux/F1.4(IR ON) IR Range-Up to 50 Meter,Electronic Shutter-

Auto/Manual(1/25~1/10000), Lens 2.8 to 12 mm Motorized zoom

Lens,Resolution Main-1920x1080p,Digital Noise Reduction-

3D,Wide Dynamic Range-120db, Behavior Analysis-Line

crossing detection, intrusion detection, unattended baggage

detection, object removal detection.Support Face Detection.

Region of Interest Support 1 ROI per stream.Power Consumption

and Current- 12 VDC, 1.2A, max. 14.5W PoE (802.3at, 42.5V to

57V), 0.5A to 0.1A, max. 16.5W.Protection Level IP67, IK10 TVS

2000V Lightning Protection, Surge Protection and Voltage

Transient Protection.Regulatory UL, CE, FCC.Operating

Conditions Temperature: -30 °C to +60 °C (-22 °F to +140

°F).Humidity: 95% or less.

Digitally signed by ARTI

Supplying of 1/2.8’’ Progressive Scan CMOS PTZ Dome Camera 2,93,044.00

with laser IR,Compression-H.264/MJPEG/MPEG4,Focal Length -

4.3-129mm, Optical zoom 30x and digital zoom 16x,Max. Image

Resolution-1920×1080,Frame Rate 50Hz: 25fps(1920×1080)

360° endless pan range and -2°-90° tilt range,240°/s Pan Preset

Speed and 200°/s Tilt Preset Speed,0.1°-160°/s Manual Pan

Speed and 1°-120°/s Manual Tilt Speed,256 presets

programmable; preset image freezing capability ,8 patrols, up to

32 presets per patrol 4 patterns, with the recording time not less

than 10 minutes per pattern,SD/SDHC card local storage Support

up to 8 NAS storage; Edge recording (transmit the videos from

SD card to the NAS after network resumed) High performance

Laser IR LED covering up to 500m (IR) distance 3D intelligent

positioning function,3D DNR,Protection Level-IP66 standard,TVS

6,000V lightning protection, surge protection and voltage

transient protection.

Supplying of 2U Rack mount single chassis Network Video 6,63,594.00

Recorder with dual Gb NIC, 1 DVI-I + HDMI + 1 Display Port,

max 2 simultaneous monitors, RS-232/485 serial port, DVD,

Server Operating System-Windows 10,Ubuntu Linux 16.04,

Processor-Gen 4 Intel Core i3, Local Client Display Rate

(FPS)Windows – 700 FPS (HD)Linux – 900 FPS (HD),High

Performance, High Reliability IP Recorder. — Continuously

records 300Mbps (Windows) & 450 Mbps (Linux)of video while

hosting a local client, multiple remote clients and the web server

on a single server,RAM-4 GB, 8 GB, 12 GB (Optional)solid-state

operating system drive,USB-6 x USB 2.0, 2 x USB 3.0 high air

flow cooling and hardware monitoring features ensure maximum

uptime. keyboard and mouse, Professional Grade client and

server software pre-installed and software updates. Access live

and recorded video on multiple client PCs with free Windows,

Mac or Linux client application. web server application is pre-

installed on the server to access video through a web browser or

free Mobile iPhone / iPad and Android apps. Maximum Storage

Capacity 30TB & Maximum Hard Drive 3 Slot(Up to 10TB)

Support Up to 64 IP Camera.

Supply, installation, testing and commissioning of Enterprise 40,238.00

Digitally signed by ARTI

Supply, installation, testing and commissioning of Video 12,554.00

Management System (VMS) software shall be used to view live

and recorded video from capture cards and IP devices connected

to local and wide area networks. The VMS software shall have a

client/server-based architecture that can be configured as a

standalone VMS system with the client software running on the

server hardware and/or the client running on any network-

connected TCP/IP workstation. Multiple client workstations shall

be capable of simultaneously viewing live and/or recorded video

5.5 NS-5.5 from one or more servers. Multiple servers shall also be able to Each 1.00 12,554.00 12,554.00

simultaneously provide live and/or recorded video to one or more

workstations. The VMS server software shall also have the ability

to be installed on an IP edge device—such as an IP camera or

encoder that allows for 3rd party applications—allowing the

device to serve as both a server and IP video recording

device.The VMS shall not charge for the number of concurrent

clients (min. 50 thick clients and 16 mobile clients to be provided

along with VMS).

Supply & Laying of outdoor armoured 4-pair Category 6 cable as 98.00

per TIA-568C.2, The cable should be tested till 250 MHz , Shall

5.6 NS-5.6 be Fire-Retardant, Low-Smoke & Zero-Halogen as per IEC Mtrs 50.00 98.00 4,900.00

60332-1, IEC 61034-2 & IEC 60754-1 respectively.

Supply, installation, testing & commissioning of Feeder Piller 67,882.00

having IP55 Outdoor 17U Network Rack with Hood and FAN For

Field Devices. The Rack box shall be provided with external

5.7 NS-5.7 earthing lugs 5 socket Mtrs 2.00 67,882.00 1,35,764.00

Power terminaton with MCB or More Proper/Steady fixing

through RCC base as per site requirements is under bidder’s

Supply, installation, testing & commissioning of 12 Port PoE+ 1,00,417.00

Switch with 2 SFP slots 12 x 10/100/1000 Base-T PoE+ ports and

additional 2 100/1000X SFP PORTS Should support PoE+ as per

IEEE 802.3 at with PoE budget of 100W.Should support STP,

RSTP, MSTP, IGMP v1/v2/v3 snooping, STP root guard, Voice

5.8 NS-5.8 VLAN, MLD snooping (MLDv1 and v2), IEEE 802.3ac VLAN Each 2.00 1,00,417.00 2,00,834.00

tagging IEEE 802.17/equivalent for sub 50ms ring protection in

following scenario : single, dual fibre cuts in ring and when fibre

cut at common shared link in between two or more rings.

Digitally signed by ARTI

Supply and fixing of 7.0 Mtrs G.I. Octagonal Pole (70 mm A/F 48,244.00

(Top) x 130 mm A/F (Bottom) x 5 mm thick with base plate of 250

x 250 x 16 mm, 4 nos. 600 mm long M20 foundation bolts &

hardwares (suitable reinforcements to be inserted in the

foundation and 40mm x 2 nos. GI pipes for In/Out of main cables)

Any other accessories etc. required complete in all respect as per

direction of Engineer in charge. The pole shall also be provided

with recessed lockable GI junction box of suitable size and flush

door at the bottom with proper

strengthening for the cutout of the door opening of junction box.

The cost of RCC foundation shall be Included

Supply, installation, testing & commissioning of IP55 Outdoor 10,161.00

Junction Box For Field Devices at camera side. JB must be of

appropriate size to house different components as per CCTV

system design confirming. The junction box shall be fixing along

with weather proof clamping with pole as per site requirement.

Supply, installation, testing & commissioning of Client 50,848.00

Workstation having Intel Core i5 orginal motherboard, 16 GB

RAM, Video graphics card 2 GB Licensed Windows 8

Professional (64 bit) and 1 TB Hard Disk with Web

camera,Printer and finger print scanner.

Supplying, Installation,Testing & Commissioning of 40 " LED Full 46,599.38

HD TV Resolution 1920 x 1080 ,Contrast Ratio (Typical)

5000:1,Built-in Speaker (10W + 10W), Magic Clone (to USB),

Auto Source Switching & Recovery, Lamp Error Detection, Super

Clear Coating, Temperature Sensor, Plug and Play (DDC2B),

5.12 NS-5.12 Pivot Display, Clock Battery, PIP/PBP, Video Wall (10x10), Each 1.00 46,599.38 46,599.38

Image Rotation, Button Lock, HDCP Support, Smart Scheduling,

Smart F/W update, Built-In MagicInfo Premium-Swith Mounting

Brackets as per Technical Specification complete in all respect.

Supply, installation, testing & commissioning of online 1KVA fully 31,961.69

Microprocessor Based UPS System suitable for Single phase,

AC 50 Hz. input supply comprising of following features.High

5.13 NS-5.13 Frequency PWM Inverter using IGBT Technology Manual by Each 2.00 31,961.69 63,923.38

pass switch LCD disply SMF VRLA Batteires with 30 minutes

back up time for full load including interconnecting cables Battery

Digitally signed by ARTI

6 Sub-Head - 200KVA11/0.433KV TRANSFORMER

Shifting and ITC with minor repair of 200 KVA 11/0.433KV 1,43,909.85

TRANSFORMER with one service

7 Sub-Head -HT panel

Shifting and ITC with minor repair of 11KV HT PANEL including -

one service of the transformer

11 KV Three panel VCB Switchboard as described above 49,340.52

8 Sub-Head - IV- LT PANELS & DISTRIBUTION BOARDS

The folowing details are covered/included in the items, wherever

required and the bidder shall quote the rate acordingly:

1 Supporting rigid steel framework.

2 Cubicle type, 14 gauge CRCA sheet steel enclouser.

3 Complete with interconnections and distribution bus bars.

4 Proper bonding to earth.

Painting/lettering on Breakers and distribution boards, the

5 location they serve, providing on each panel its circuit diagram.

Providing cable clamps / supports within distribution boards cable

TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with

adequate size of neutral link.

8 All MCB’s shall be of minimum 10 KA breaking capacity.

9 All motor feeders MCCBs shall be of motor duty.

Distribution panels shall be Powder Coated with Siemens gray

paint shade no. RAL-7032 of IS-5.

Degree of protection for following type of distribution panel

enclosure shall be as per IS:13947-1993.

12 IP 42 for indoor panels.

13 IP 54 for kitchen and laundry panels.

14 IP 55 for outdoor panels

All MCCB’s shall be provided with operating mechanism for door

Current density of aluminium shall be 1 sq mm for 1.0 amps for

rated current of bus bars and current density of copper shall be 1

sq.mm for 1.25 amps for rated current of bus bars.

Tinned copper earth bus shall be provided through out the length

All measuring instruments (Meters) shall be of digital electronic

18 with LED of approved make and compatible with BAS.

Digitally signed by ARTI

All hinged door shall be earthed through 4.0 sq mm tinned

braided copper wire.

20 All panels shall have provision of the following:

21 Pad locking of Switch board doors.

22 Pad locking of MCCB’s handles in “OFF” Position.

Additional set of C.T.s, potential free contacts, connectors,

contactors with wiring etc are to be provided for BAS including

23 space required for various transducers in Main Switch Board

sections. Only transducers shall be supplied by BAS contractor.

All MCB’s used for protection of resistive and lightly inductive

load shall be type “B” characteristic and inductive (motor) load

24 shall be of type “C” characteristic and discharge lamps and UPS

etc. shall be of type D characteristic.

All incoming and outgoing air circuit breakers shall be placed on

25 middle portion of the vertical in single tier formation.

All PTs / control transformer shall be provided with centre tap

earth secondary.

All DOL & Star-Delta Starters shall be provided with SPPR

27 (single phase preventor relay) and 2 nos. of Aux.Contacts for

Remote operation/monitor.

The Panel fabricator shall provide Al./ Copper Bus-bars link from

28 Breakers wherever more than two nos. of cables are terminated

in the breakers.

Readymade 16 SWG Sheet steel Enclosure with cutout For

30 The breaking capacity of MCCB’s are mentioned

panel wise. All MCCB’s shall be with thermal magnetic

releases upto 250 amps and miroprocessor based

above 250 amps capacity, unless specified otherwise.

31 Protection Releases Microprocessor based (PRMB) &

Thermal magnetic (PRTM) shall be as described below .

i Protection Release Microprocessor Based (PRMB-

1) Over-current/long time protection range 40% - 100 %

with Time setting

short circuit /short time protection range 100% - 1000

% with Time setting

Instantaneous short circuit Protection range 150% -

1200 % with Time setting

Earth Fault Protection range 20% - 100 % with Time

Under voltage & over voltage protection

Digitally signed by ARTI

Current unbalance

Power (Active,Reactive & Apparent)

Energy ((Active,Reactive & Apparent)

B Protection Release Microprocessor Based (PRMB-

2) Over-current/long time protection range 40% - 100 %

with Time setting

short circuit /short time protection range 100% - 1000

% with Time setting

Instantaneous short circuit Protection range 150% -

1200 % with Time setting

Earth Fault Protection range 20% - 100 % with Time

Digitally signed by ARTI

C Protection Release Microprocessor Based (PRMB-

3) Over-current/long time protection range 40% - 100 %

with Time setting

Instantaneous short circuit Protection range 150% -

1200 % with Time setting

D Protection Release Thermal-Magnetic Based

Distribution panels

Design, fabrication, assembly, wiring and supply of front operated

dead front cubicle type compartmentalised as per Form 3B, rear

access free standing, dust and vermin proof (IP 42 ingress

protection) main switchboards suitable for use at 415 volts, 3

phase 4 wire 50 Hertz system suitable for a symmetrical fault

level of 25 kA at 415 volts, fabricated from 2 mm thick CRCA MS

sheets with hinged, gasketted (metal based neoprene) and

lockable doors having structural reinforcement with suitable

angle/channel/T/flat sections including 3 mm thick gland plates

on top and bottom and including lifting hooks and including GI

earth strip of required size with 2 nos earthing terminals and

including powder coated paint finish of approved shade over

metal surface cleaned and treated with seven tank process

complete with interconnections etc as per specifications, as

required and as below.

(Note:The contractor may select the next higher fault rating of

MCCB if it is not readily available ,without any extra cost ,as the

figure indicated within the bracket are required maximum fault

level of the panel).

9 NS-8 Main Distribution Panel

A INCOMER FROM 200 KVA Transformer

1 No. 400 amps 4P MCCB(25 KA) with Microprocessor release

(PRMB-1) with Class-C transient voltage surge suppression

device suitable for 3 phases as per specifications.

1 No. 400 amps 4P Contactor

B METERING & INDICATION

i) 1 set of R,Y,B phase indicating lamps

ii) 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos.

iii) 1 No. (0-400A) Ammeter with ASS with 3 nos. 400/5A

Digitally signed by ARTI

iv) 1 No. Digital Electronic KWH meter(Dual Source).

1 Set of 500A TPN Aluminium Bus Bar with colour coded PVC

i) 3 Nos. 160A TP+NL MCCB (25 KA)

ii) 2 Nos. 125A TP+NL MCCB (25 KA)

iii) 1 Nos. 100A TP+NL MCCB (25 KA)

iv) 2 No. 63A TPN MCB (10 KA)

E Capacitor Bank (90 kVAR)

METERING & INDICATION

i) 1 set of phase indicating lamps

1 No. 8 step-Microprocessor APFC controller/Relay(Dual source

purpose) shall continuously monitoring all three phases and LCD

displays for various Electrical Parameters like voltage, input

current, capacitive current, KVA demand, KW, Power Factor, self

diagnostic error code indication with printout facility of the above

ii) with RS 232/RS 485 port. Controller should mounted on the front

side of the panel. Capacitor bank having 3 phase MPP based mix

dieelectric low loss ISI marked power capacitor and provided with

Electronic Thirstier based switching to suppress switching of

inrush current and reducing harmonics capacitor life.

1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC

i) 2 Nos.of 80A TP MCCB (25 KA) each with

2 Nos. 25 KVAR capacitor Bank each with 7% harmonic &

discharge resistor with thyristor module suitable capacity to carry

expected current continuosly.

ii) 3 Nos. of 32A TP MCCB (25 KA) each with

3 Nos. 10 KVAR capacitor Bank each with 7% harmonic &

discharge resistor with thyristor module suitable capacity to carry

expected current continuosly.

iii) 2 No. of 25A TP MCCB (25 KA) each with

2 No. 5 KVAR capacitor Bank each with 7% harmonic &

discharge resistor with thyristor module suitable capacity to carry

expected current continuosly.

Digitally signed by ARTI

415/110V suitable rating control transformer and shall be

provided for aux. control supply.

Wiring with space heater, thermostat and control MCB's shall be

provided for all vertical sections of main LT

iii All breakers shall be interlocked as per schematic diagram.

All incoming as well as outgoing feeders shall have pad locking

v Suitable danger board shall be provided.

Main Distribution Panel described as above set 1.00 7,84,514.27 7,84,514.27 7,84,514.27

59.0 NS-9 Bollard Light

Supply, installation, testing & commissioning of bollard light as

per the approved make and model of IP 65 series of maximum

1m height which will act as imposing street furniture complete in

all respect as per direction of Engineer-in-charge

8W Capacity bollard light Each 50.00 9,443.23 9,443.23 4,72,161.50

Supply, installation testing & commissioning of submersible 24,523.33

pumping set suitable to operate on 410 volts 3 phase 50

HZ A.C. power supply including water proof joint , earthing

NS-10 connection, motor control panel complete in all respect as per each 5 24,523.33 1,22,616.65

details given below : (For Borewell) Discharge: Min 150 lit/minute

Head: Min 40 m HP Load Min. 1.5

Annual Maintenance Contract for 1 year OF RO systems of 8,27,104.73

RO 1500 LTR/HR capacity - 1 NO,

RO 250 LTR/HR capacity-3 NO,

RO 10 LTR/HR CAPACITY-2 NO,

NS-11 ACADEMIC WATER COOLERS/Chillers-12 NO, Job 1 8,27,104.73 8,27,104.73

ADMIN WATER COOLERS/chillers - 4 NO,

HOSTEL COOLERS - 2 NO

VC house cooler- 01 Nos

Guest house & Implement shed RO & Cooler- 02 nos

Pressure pumps- 4 NO at RLBCAU UNIVERSITY as per

direction of EIC.

Supply and Installation of 300 mm sweep,900 RPM ,AC 230/250 3,700.50

volts, 50 HZ exhaust fans including providing nuts, bolts,

mounting frame and other accessories etc. complete as reqd.

Digitally signed by ARTI

Supply, installation, testing and commissioning of boom lift hold set 1 126,77,772.50

upto 1000 lb, platform capacity allowing to carry up to 3

NS-13 plus material and tools to get job done easily, maximum platform 126,77,772.50 126,77,772.50

height 26m and working height 28m, maximum horizontal reach

17m complete in all respect as per the technical specification and

direction of engineer in charge

Total Non schedule items 262,40,772.28

TOTAL AMOUNT 310,40,008.33

TOTAL AMOUNT 310,40,008.33

Digitally signed by ARTI