SPECIAL REPAIR TO ROOF ACOUSTIC PANELLING AND ELECTRIC WIRING AT BLDG NO 281 RED HORN AUDITORIUM AT UMROI UNDER GE UMROI

Amount

Dismantling AC/CGI/PPGI corrugated or semi corrugated sheets in wall cladding or roof coverings and hanger doors including ridges and make good for aluminium earthing strips after fixing of sheets complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated/trapoziod profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws heavy duty with in built washer and neoprene & EDPM washer in roofs walls etc Completed all as specified and directed by Engr-in-charge.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws heavy duty with in built washer and neoprene & EDPM washer in roofs walls etc Completed all as specified and directed by Engr-in-charge.

S&F as in repair 110mm bore PVC ( SWR ) pipes double socketed, in any length with rubber ring joints, fixed to walls all as specified and directed.

S&F as in repair 110mm bore PVC ( SWR ) bends, any radius complete all as specified and directed.

S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays,incl bolts and nuts and securing gnds of stays to wall or roof for75/100mm bore of pipe complete all as specified and directed by Engr in charge.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all specified and directed.

Dismantling of wall and ceiling board (fibre,insulation etc) or insulation board ,slabs,blankets, any thickness incl cover fillets complete all as specified and directed.

S&F Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fastners 12.5 mm dia 40mm long ,complete all as specified and directed.

S&F Anodised aluminium snap grid frame work (605 x 605 mm) for false ceiling, complete all as specified in clasue No 10.38 of SSR Part I and directed.

M&L for Providing and fixing Perforated particle boards or tiles 16 mm thick for insulation and accoustic purposes as in ceiling, 60cm x 60cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified and as directed.

S & F Armstrong ' Acoustical Wall Paneling' with square edges made of fibre glass substrate 25 mm thick and wrapped on the front side with an acoustically transparent and classified for fire reaction class A as per ASTM E - 84 , fabric with an option of colours as per the choice of Engr-in-charge / Garrison Engineer of size 600 x 1200 mm providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using wall panel impalers supplied by M/S Armstrong Industries pvt Ltd and construction adhesives as the instructions laid down by the manufacturer. Wall panel impalers shall be fixed to the wall surface using self tapping screws. Silca based construction adhesive to be dabbed on the projecting elements (spikes ) of the impalers. Wall panels shall be pierced through the spikes of the implares ensuring the line and level of the panels are maintained complete all as specified and directed. Make : Armstrong, Saint Gobain, Everest

S&F 25 mm thick second class hardwood Boarding in Skirting Planed one side, with butt joints and fixed with nails all as specified and directed.

M&L for preperation of new wooden surfaces of any description over 10 cm in width or girth and applying one coat of finishing coat with synthetic varnishing over Filler coat Wood filler liquid transparent etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specified, complete all as specified and as directed.

Supply & Fixing Rotational moulded polyethene water storage tanks 500 lit capacity with lid (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I , complete all as directed by Engr-in- Charge.

Taking up or down steel tubing and conncection 20 mm bore, incl cleaning for re-fixing or removal to store, complete all as specified and as directed.

Supply and fixing 20 mm tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 20mm) complete all as specified and directed by Engr-in-Charge .

Refixing old steel tubing 20 mm dia and connection in new or old position complete all as specified and directed by Engr in charge.

Taking up or down steel tubing and conncection 15mm, incl cleaning for re-fixing or removal to store complete all as specified and as directed.

Supply & Fixing Tubes medium grade, 15mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors Complete all as specified and directed.

Refixing old steel tubing 15 mm dia and connection in new or old position complete all as specified and directed by Engr in charge.

S&F in repair 20mm bore nipple suitable for HDPE water tank (minimum weight 45 gms), complete all as specified and directed.

S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball csrewed for iron pipe and fixed, complete all as specified and directed.

S&F in repair 20 mm bore gun metal, glove or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply & Fixing 20mm dia ball brass valve high pressure with polythene float and fly nut complete scrwed for iron pipe or brass ferrule and fixed in repairs complete all as specified and as directed.

Demolition of brickwork/solid block masonry or stone boulder masonry, built in cement mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

Material & Labour for precast cement concrete ( 1:3:6), type C-1, (using 20mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar (1:4) etc complete as specified.

Material & Labour for 15mm (10+5mm) thick external wall plastering in CM (1:4) in two layers mixed with water proofing compound @ 3% by weight of cement in top 5mm thick finished the surfaces even & smooth without using extra cement complete all as specified and directed. (Note : Water proofing compound shall be measured and paid separately)

Supply only integral water proofing compound

Material and labour for preparation of newly plastered surafaces of wall and applying two coats of exterior weather coat paint over coat of alkali base primer mix penetrative rain proofing liquid over dry surface using brush complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc.

M/L Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) on concrete surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over one coat of wall care putty (3mm thick), complete all as specified and as directed.

M/L Rendering 5mm thick on fair faces of concrete surfaces in cement mortar (1:3) on concrete surface finished even and smooth without using extra cement, as in ceiling, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of whitewash, complete all as specified and as directed.

M & L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Material & Labour for complete removal of existing old treatment of wall and applying a layer of 1.5mm thick wall care putty and two coats of oil bound distemper over a coat of alkali resistant primer including preparation of surface complete all as specified and directed.

M&L for preperation of old wooden surfaces of any description over 10 cm in width or girth and applying one coat of finishing coat with synthetic varnishing over Filler coat Wood filler liquid transparent etc complete all as specified and directed.

Hacking out old broken glass ( any thickness, size, quality or description ) from metal frame incl punching or drilling out old glazing pins and providing fixing new one n,exc 0.5sqm each pane complete all as specified and as directed.

Supply & Fixing sheet glass ordinary quality 4mm thick glazing in square/ rectangle n,exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel etc complete complete all as specified and as directed.

Material & Labour 4mm thick figured glass,n,exc 0.50 sqm each pan, pin headed type and glazing with oil putty or aluminium beads fixed to steel etc complete all as specified and as directed

Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sunken type box etc. and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge.

M&L for point wiring for modular fittings with 1.5 Sqmm (nominal area) PVC insulated1100 volts grade, multistranded, copper conductor, single core, unsheathed cables (FRLS quality) drawn through and including PVC conduits of suitable size but not less than 20 mm dia (medium grade) with all fittings and accessories concealed in walls/ceiling etc including cutting chases for conduits and sinking for boxes and making good to disturbed surfaces including PVC insulated and unsheathed, single core, multi-stranded, copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one light point / fan point/ one call bell point controlled by one 5 Amps one way switch complete as specified and directed. Note : Quoted rate shall be inclusive for necessary chasing and cutting and making good .

All as per item No 44.00 above but for one 3 pin socket outlet 5 Amps, on independent board.

All as per item No 44.00 above but for one 3 pin socket outlet 5 Amps on same board alongwith other suitable switches.

All as per item No 44.00 here-in-before but using 2.5 sqmm PVC FRLS insulated copper conductor wire for connecting 15A socket on independent board complete all as specified/directed.

Supply and fixing of modular switch, one way 6 amps, 1 module 240 Volts complete all as specified/directed.

Supply and fixing of modular socket outlet 2/3 pin 6 Amps 240 volts 2 module complete all as specified/ directed.

Supply & fixing of modular switch one way 16 Amps 1 module 240 Volts complete all as specified / directed.

Supply and fixing of modular socket 6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed.

Supply & Fixing of modular type ceiling fan regulator step type ,2 module, 120 W complete all as specified and directed.

Supply and fixing lamp holder angular PVC/Polycarbonate suitable for batten fittings complete all as specified/directed.

Supply and fixing of ceiling rose 3 Phase PVC/Polycarbonate, isolated body complete all as specified/directed.

Supply and fixing of modular metal flush box 1 module with modular white cover plate complete all as specified and directed..

Supply and fixing of modular metal flush box 3 modulewith modular white cover plate complete all as specified and directed..

Supply and fixing of modular metal flush box 4 module with modular white cover plate complete all as specified and directed..

Supply and fixing of modular metal flush box 6 module with modular white cover plate complete all as specified and directed..

Supply and fixing of modular metal flush box 8 module with modular white cover plate complete all as specified and directed..

Supply and fixing LED tubelight fitting 1x18 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed. Make: BAJAJ Cat Part No: BLRB- DB 118 for batten and BLRB-18 Watt CWc for tube light or its equivalent in Surya Roshni Ltd/Havells/philips/wipro/GE

Supply and fixing in repair of MCCB TPN DB 4 way vertical type double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08,suitable for MCCB's upto 125 Amps as incomer complete all as specified and directed by Engr-in-charge

Supply only pedestal fans AC single phase 230/240 Volt of size of sweep 600 mm heavy duty complete all as specified . Make : Havells / Usha/Bajaj

Supply and fixing in repair of MCB SPN DB 8 way double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge.

S&F in repair MCCB,125 Amps 16kA, four pole, 415 volt adjustable all as specified and directed by Engineer-in- Charge.

Supply & fixing of MCB SPN 32 Amps 'C' Series 10 KA 240 volts complete all as specified/directed.

Supply & fixing of MCB SP 6-32 Amps 'C' Series 10 KA, 240 volts complete all as specified/directed.

Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised wire of size 4 mm (upto 7.50m length)as earthing lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar, funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execution and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed.

Material & labour for Sub main wiring with two runs of single core 1.5 Sqmm (Nominal Area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn through and including PVC conduit of adequate size (minimum 20mm) of wall/ceiling with all necessary fittings and accessories and 1 run of FRLS PVC insulated and unsheathed insulated single core cable with multi stranded copper conductor of size 1.5 Sqmm as earth wire (green in colour) run throughput conduit and connected to common earth dolly including taking out the old sub main wiring complete all as specified and directed. Note : (a) Two run of reinforce cable, one run earth wire and one run PVC conduit will be measured as one length. (b) Rate shall be inclusive for necessary chasing and cutting and making good to match the existing surfaces.

Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn through and including PVC conduit of adequate size (minimum 20mm) fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLS PVC insulated and unsheathed insulated single core cable with multi stranded copper conductor of size 6 Sqmm as earth wire (green in colour) run through PVC conduit and connected common earth dolly including taking out the old sub main wiring complete all as specified and directed. Note : (a) Two runs of reinforce cable, one run earth wire and one run PVC conduit will be measured as one length. (b) Rate shall be inclusive for necessary chasing and cutting and making good to match the existing surfaces.

Supply & fix air circulators wall fans AC single phase 230/240 V of size 600 mm sweep RPM 1440, complete all as specified . Make : Turbo force of Havells or equvailent model of Usha/Bajaj

Supply and fix wall light fittings 12 watt LED 230 V energy efficient Die cast alumnium housing, transparent tempered glass diffuser, IP-54, wall washer etc complete incuding connected with twin core twister flexible wire copper conductor all as per directed and as specified. Make: Jaguar Cat Part No LWWL03X012XW or its equivalent make Havells/Bajaj.

Supply and fix wall uplight fittings 03 watt LED 230 V energy efficient Die cast alumnium housing, transparent tempered glass diffuser, IP-54, wall washer etc complete incuding connected with twin core twister flexible wire copper conductor all as per directed and as specified. Make: Jaguar Cat Part No LWWL03X103XW or its equivalent make Havells/Bajaj.

Supply and fix recess mounted white powder coated CRCA housing with full mounted acrylic diffuser (2ft x 2ft) etc complete incuding connected with twin core twister flexible wire copper conductor all as per directed and as specified. Make: Jaguar Cat Part No LULT01S036XM or its equivalent make Havells/Bajaj.

Supply and fix surface mounted focus light fitting 10 watt 230 V energy efficient Die cast alumnium housing powder coated anodised alumnium reflector with clear diffuser fully adjustable complete incuding connected with twin core twister flexible wire copper conductor all as per directed and as specified. Make: Jaguar Cat Part No LFCL01R010XC or its equivalent make Havells/Bajaj.

Supply and fix wall light fitting of 23 watt LED, 230 Venergy efficient Die cast alumnium housing opal white PC diffuser, E-27 cap base, IP-54 etc complete incuding connected with twin core twister flexible wire copper conductor all as per directed and as specified. Make: Jaguar Cat Part No CWLL01X118XX or its equivalent make Havells/Bajaj.

Supply and fixing of wall mounted LED battern with polycarbonate housing and integrated electronic driver of capacity 12 W. Make: Philips Cat Part No 31403 12 Watt LED picture light (Gold) or its equivalent to Surya / Havells

Supply & Fix single pointed air termination copper rod 12mm dia, 300mm long fixing on GI pipe 50mm with 20 x 3mm MS clamps, nut bolt, bracing etc required at site all as specified and as directed (Cross arm will be measured and paid separetely)

M&L for precast concrete block with solid block in 1:2:4 type B1 20mm graded aggregate as in bed blocks of size 300x300x300mm for holding GI pipe etc, including necessary formwork complete all as specified and directed.

S&F test point terminal block made of gun metal or phosphorous bronze size 75 x 75 x 25 mm, drilled and screwed including 3 Nos, 8mm dia 25mm long hexagonal head brass screws including suitable sheet metal powder coated enclosure all as specified and directed by Engineer-in-Charge.

Supply & fix alumnium strip 25mm x 3mm complete with epoxy insulators at every one mtr distance at normal run and 60 CM at every corner and edges of bid tarrace and fixing screws for fitting the strip all as specified and as directed

Supply & fix GI strip 32mm x 6mm buried in ground complete all as specified and as directed

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6.00 mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron strip of size 32x6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to earth test point all as specified and testing on completion including provision of earth lead protected by 40 mm bore light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete.

Supply and fixing 40 mm tubes light grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge .

Supply and fixing 50 mm tubes light grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge .

R.K.ENGINEERING ASSEMBLE

M/s Jaiswal and Co

M/s Capital Traders

M/s Dhruv Enterprises

M/s JK Jangid and Company

KUNDAN ENGINEERS AND BUILDERS

M/S SEWAK SINGH

M/S RAJ RANI BUILDERS

M/S. SUBHAS CONSTRUCTION CO.