SPECIAL REPAIR TO BLDG NO T-196 OR SINGLE ACCN INCL FLOORING WITH KOTA STONE, FALSE CEILING OF ENTIRE ROOF OF GALVANISED ALUMINIUM SHEET JOINERIES, SANITARY FITTINGS AND REWIRING AT 3 EME CENTRE AT BHOPAL

Amount

Demolition of cement concrete in ground floor, (un-reinforced) paving nexc 15 cm thick (below or above GL) incl tiling complete all as specified and directed

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed.

M&L for 40mm thick Cement Concrete (1:2:4) Type B-1 (Using 20 mm graded crushed stone aggregate) as in Sub floors complete all as specified and directed.

M&L for hard core of gauge n.exc 63mm but n.exc100mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rolled /rammed to a true surface.

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, including ridge complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F steel work as in tubular (round/ square/ rectangular shape of pipes as approved by Engr-In-Charge) trusses of semi circle shape including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 grade St-240 complete all as specified and directed. Note: weight shall be verified by the GE.

M&L for MS work, angle iron, flat iron, MS plates as in brackets, cleats, fastners, wind ties, supports, base for posts etc with riveted, bolted or welded attachment complete all as specified and directed.

Dismantling of wall and celing hard boards/AC sheets and plywood in any thickness & any position including cover fillets complete all as specified and directed

M&L for galvanised cold rolled steel section frame work size 600x600 mm grid size 24x38x0.30 mm Tee (bottom pre-coated) and 24x24x0.30 mm thick wall angle, galvanised cold rolled steel section including suspenders as per (Gapsec) manufacturs instruction as in ceiling. Make: Gapsec or equivalent as approved by the GE.

M&L for Asbestos free calcium silicate board of size 600 x 600 x 6mm thick fixed to steel frame work as in ceiling, including applying two coats of oil bound distemper all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over and including 15mm thick screed bed in CM (1:6) etc set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as spfd and directed.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over as in skirting and including 10 mm thick rendering in CM (1:4) set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified.

M&L for glazed Ceramic tiles, coloured ( 350 x 450 mm/ 250 x 350mm) x 7 mm thick as in skirting/dado over & including 10 mm thick rendering in CM (1:4) set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as spfd & directed. Make: Somany/Johnson/ Kajaria

M&L for pre-polished chequered cement concrete tiles glossy finished size (200x200 mm) x 25 mm thick set jointed and pointed in neat cement slurry with greay cement and pigment over 15 mm thick screed bed in CM 1:6 complete all as spfd & directed.

M&L for granite (any type) 20 mm thick work(table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter, shelves and like in cement mortar )1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm, in floors over and including 15mm thick screed in CM (1:6) etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed Make: Somany/Johnson/ Kajaria

M&L for non skid ceramic coloured tiles 7mm to 8 mm thick(square/rectangular) area of each tile exceeding 0 .11 Sqm, but not exceeding 0.18 Sqm on vertical surfaces such as skirting, dado and risers to steps etc over & including 10 mm thick rendering in CM (1:4) set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified & directed. Make: Somany/Johnson/ Kajaria

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles and rubbish off the permises complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C2 , (using 40 mm graded crushhed stone aggregate) in plinth protection,aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling, subbase and mass concrete complete all as specified and directed.

M&L for Mild steel TMT Bar 8mm dia and over cut to length, bent to shape to required , including cranking , bending spirally for hoping for columns , hooking ends and binding with and including mild seel wire ( anneled ) not less than 0.9mm dia or securing with clips quality confirming all as specifed and directed.

M&L for Mild steel TMT Bar 5mmm dia and over up to and including 10mm dia in stirrups, spacers and binders complete all as specifed and directed.

Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM (1:4) all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hackng for key, scrubbing down with water, etc complete all as specified and directed.

M&L 15mm thick rendering in CM (1:6) on brick/ concrete surfaces including finishing the surfaces fair and even (without using extra cement) complete all as specified and directed

M&L for applying two coats of oil bound distemper paint on walls surfaces including preparation of new plastered surfacecomplete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of Cement Base paint on walls where as requied all as specified and directed. Make: Shalimar (Shaktiman)/ Asian(ACE)/ Burger (wall masta) or equivalent in approved make by GE.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper on walls all as specified and directed .

M&L for applying one coat of white wall care putty 3 mm thick on walls complete all as specifed and directed.

M&L for complete removal of existing treatment and applying two coats of exterior Cement paint on walls all as specified and directed. Make: Shalimar (Shaktiman)/ Asian (ACE)/ Burger (wall masta) or equivalent in approved make by GE.

Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F in Window ECO 4000, of double rebate openable/fixed window made of galvanised steel colour coated/powder coated (base steel as per IS 513 Of 'D' quality, galvanised as per IS 277 with zinc of 120 gms/sqm) with total thickness of coating 0.58 microns thick and back coated with alkyd backer 5-7 micron thick or powder coated with pure polyster powder up to 50-60 micron thick. Outer frame section 72 x 55 mm , center mullion section 72 x 50 mm, shutter section 47 x 20 mm, flymesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the section cut to length mitre joined with corner bracket, center millions fised with mullions cap, stay, handle, latch, 2 nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick plain float glass and S. S. mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propyelene Diamine Monomer) gaskets including fixing windows in the Concrete/Masonry wallby means of self expanding screw, including 10 mm Sqaure bars welded to 6 x 12 mm flat at adistance 150mm C/C (Pitch) etc complete as oer direction of Engineer-in-Charge. Make: NCL Alltek and seccolor LTD or equivalent as approved by the GE.

S&F Anodised aluminium powder coated (Minimum thickness of powder coating 50 micron) as in Doors, windows,ventilators,partitions shutters and frames,with or without sash bar, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed by Eng- In-Charge. Note: Weight shall be verified by the GE.

M&L for 12mm thick Prelaminated particle board, exterior grade,prelaminated both side with decorative choice lamination , fixed to aluminium door, partitions complete all as specified and as directed.

S&F 200 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed

S&F 250mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed

S&F 100 mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixed with stainless steel wire staples fixed complete all as specified and directed.

S&F door stopper of aluminium alloy body anodised, complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face complete all as specifed and directed.

S&F for IInd class hard wood plain, solid, straight chowkats and frames, wrought , framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed complete all as specified and directed.

S&F factroy made 35 mm thick, plain framed, pannelled shutter with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS: 1003 (Part I ), kiln seasoned and chemically poressure treated complete all as specified and directed.

M&L in repairs 18/19mm thick Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed in kitchen/storage cabinets including taking down old board with fillets incl complete shutter wherever reqd complete all as specified and directed.

S&F Solid PVC door frame of size 50 mmx 47mm made out of 5 mm wood grain PVC printed sheet used instead of plain colour PVC sheet and edges will be painted to match with printed sheet reiforced with MS square tube and fixing in opening as per manufacturer instruction complete all as specified and directed.

S&F 100 mm mild steel butt hinges medium weight,cold rolled complete all as specified and directed

M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F in repairs syphonic action type PVC low level flushing cistern 10 ltrs capacity incl 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers with connectiocomplete all as specified and directed.

S&F in repairs 15 mm bore Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete as specified.

S&F in repair 15 mm dia pillar taps cast copper alloy,with capstain head .chromium plated fancy type screw down high pressure,with or without lettered Hot or Cold wih long shanks and fly-nuts screwed for iron pipes complete all as specified and as directed.

S&F in repairs 15 mm bore stop cock, cast copper alloy, chromium plated with long shank and cut (concealed type), screwed down, screwed for iron pipe or union complete as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laborary with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm and including coupling and waste pipe complete all as specified and directed.

S &F in repair vitreous china wash basin flat back size 450 mm X 300 mm fixed and including CI Brackets, 32 mm dia brass waste coupling and waste pipe etc complete all as specified and directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Refixing 20 mm GI tubing and connection in new or old position(walls, ceiling and floors etc) including all fittings all as specified and directed.

Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Refixing 15mm GI tubing and connection in new or old position(walls, ceiling and floors etc) including all fittings all as specified and directed.

S&F in repairs vitreous china squatting pan "Orissa Pattern" size 580mm x 440mm white with integral foot rests, including prov of cement concrete bedding and 'P' or 'S' trap as required complete all as specified and directed.

S&F in repairs vitreous china wash down water closed pan(pedestal Pattern), white(excluding fixing bolts, flushing cistern and flush pipe) and including plastic seat cover complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe) including urinal spreader complete all as specified and directed.

S&F in repair 100mm dia CP grating complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls/ laid in trenches/floors complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls / laid in trenches/floors including taking down complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal including taking down complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius 75 mm dia complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) floor/ Nahani trap with grating including jointing with solvent cement complete all as specified and directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

Demolition and breaking up of 150 mm dia of drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for 150 mm bore salt glazed stone ware drain pipes laid in trenches and jointed as specified and directed.

M&L for cement concrete (1:4:8) type D2 (Using 40mm graded crushed stone aggregate), concrete bed to drain pipes 150 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and directed.

Excavation in trenches not exc 1.5 meter wide & not exc 1.5 mtr in depth: for foundation etc or for manholes, laying of pipe in any type of soil and getting out complete all as specified

Returning filling in, including spreading, leveling watering & well rammng in layers not exc 25cm thick complete all as specified and directed by EIC

Removing excavated material to a distance not exc 50 mtr & depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified & diected

Taking up or down steel tubing and connction including cleaning for refixing or removal in store all as specified and directed of following size:-

25 mm bore

Supply, fixing & laying in repairs GI tubing medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/wall/ceiling/ floor/ all as specified and directed of following size:

25 mm bore

M&L for refixing of existing old GI tubing taking down under item 86.00 above and connections in new or old position including cleaning internally and externally, any grade/make laid in trenches/wall/floor/ceiling including all type of new fittings i.e. sockets, Tee union elbow etc all as specified and directed of follwing size:-

25 mm bore

Taking out unsv Gun metal globe & S&F Gun metal globe or gate valves, conf to IS 778 with iron wheel head, screwed both ends for iron pipe and fixed in existing or new position for following size:- Make: Leader/ Zoloto/ Sant

20 mm bore

25 mm bore

Taking down u/s tank and Supply and fiixing rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer, ISI marked hoisting & fixed in position all as specified in SSR part-I of following capacity:- Make: Sintex (Ist Quality)/ Polywell/ Plasto

1000 ltr capacity

Taking down u/s float valve and M&L for PTMT float valve high pressure with high density plastic ball, with epoxy coated Aluminium rod screwed for iron pipe and fixed in all as specified and directed of following size:-

20 mm bore

M&L for Sand cushioning/sand covering for underground cable protection complete all as specified. Note: Punned thickness shall be measured & paid.

M&L for Brick Sub Class 'B' locally available best quality laid in trenches above sand cushioning for cable protection complete all as specified.

Supply and Laying XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 3.5 x 35 sqmm, laid in trenches/floor or fixed on wall/ pole complete all as specified.

M&L for GI Tubes, 'light grade' galvanised, with all fitting and laid in floors, under road, pavement or hard standing steel water tubing bore of tube 50 mm.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L for concealed/ surface point wiring for one light/fan point with 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, single core multi-stranded copper conductor cable, 1100 volts grade,ISI marked controlled by one one-way switch, drawn through and including concealed medium grade PVC conduit not less than 20 mm dia, ISI marked, with all accessories(PVC Casing and caping of size 25 mm , ISI marked with complete accessories to be used wherever wiring to be run on ceilings and concrete surfaces) including one run of 1.5 sqmm FRLS muti stranded copper conductor (Green colour cable) as earth continuity wire connected to common earth dolly, including sunk sheet steel terminal box made out of 1.20 mm thick and not less than 60 mm in depth GI/MS/ prssed steel terminal box to be conclead in wall, duly painted with two coates of anti corrosive black bituminous paint over a coat of red oxide primer in and out sides and two coated of aluminium paint on internal surface , including laminated hylum sheet cover, ISI marked of Make" Hylem" for mounting of fittings like switches, sockets, fan regulators etc. fixed with galvanised screw and cup washer complete all as specified and directed. Note : Wiring to be done as per arroved colour code in IE rule.Rate includes chase cutting for concealed wiring. Make of Cable: Polycab/ L&T/ Havells

Ditto all as per item No. 97 here-in-before, but for Fan point controlled by one push button on same board with other switches or independent with cable 1.5 Sqmm. complete all as specified and directed.

Ditto all as per item No. 97 here-in-before but for 3 pin socket outlet, 5 Amp on the same board with other switches, complete all as specified and directed.

Ditto all as per item No. 97 here-in-before, but for 3 pin 5 amp switch socket combination on independent board with other switch complete all as specified and directed.

Ditto all as per item No. 97 here-in-before, but for exhaust fan point controlled by one push button on same board with other switches or independent with cable 1.5 Sqmm. complete all as specified and directed.

Ditto all as per item No. 97 here-in-before but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket combination on independent board and provision of 1.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

Ditto all as per item No. 97 here -in- before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for power point with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

S&F Polycarbonate switch piano, flush button, single pole, one way 5 Amp , 240 volts ISI marked, Make: Anchor/ Cona/ Leader (white colur)

S&F ceiling rose, surface type, 3 terminal, 240 V.

S&F lamp holder (Angle holder) PVC/ polycarbonate type cased body with back plate suitable for pendent fittings including LED bulb of 9 Watt.

S&F, stepped type electronic fan regulator, Delux model, 100 watt, 240V, flush type. Make: Anchor/ Cona/ Leader (white colur)

Supply and fixing Polycarbonate socket outlet 2-in-1, 5 pin 5 Amps, 240 volts, flush type Make: Anchor/ Cona/ Leader (white colur)

S&F Polycarbonate socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete as directed . Make: Anchor/ Cona/ Leader (white colur)

S&F Polycarbonate switch piano flush button single pole one way 15 Amp 240 volt ISI marked, Make: Anchor/ Cona/ Leader (white colur)

S & F single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB of capacity 20 amps, complete all as specified and as directed.

Taking down old unserviceable sub main wiring of any size and any discription all as directed by Engr-In-Charge.

M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in but including non metallic rigid PVC conduit oe size 25 mm dia ISI marked including PVC insulated unsheathed 6 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete all as directed.

M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 2.5 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete.

Taking down existing u/s fitting and S&F LED 20/21Watt tube light fitting (T8 type) , including LED retrofit tube 20/21 W one side connection type, 240 v, PF > 0.90, colour Temp 6500 K, System Luminious efficacy > 100Lm/W, complete with powder coated CRCA decorative batten suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed. Make:- C&S cat Part No. LTDC01220WLED/WD (LED battan T8 TARA -M) or equivalent in Philips/ Crompton/ Bajaj and Havells (Titania LED tube with Regal batten LED) as approved by GE.

S&F LED light fitting 36Watt recess mounting of size 600x600mm neutral white powder coated CRCA housing with LEDs, seamless front frame with flat white high transmission acrylic cover including making electric connection from source with PVC sheathed copper conductor wire complete all as specified and directed. Make: Baja (cat part no BZRSQL 36W XLNW) or equivalent in Wipro/ CG/ Havells/ Philips as approved by GE.

Taking down existing u/s fitting and S&F LED 9/10Watt tube light fitting, surface mounting fitting for mirror light with slik and light weight batton, 240 Volt, with PF >0.95, efficacy >95 , colour temp 6500K complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed. Make:- Havells cat Part No. LHEXBQP7PN1W009 or equivalent in Philips/ Crompton/ Bajaj and C&S as approved by GE.

S&F bulk head LED luminare of 11 watt LED, weather proof and connecting with copper flexible three core 23/ 0.0076 and all necessary fittings complete.

Taking down main switches/ MCB DBs of any capacity/ type including MCBs.

S&F sheet metal enclosure for VT DB TPN, MCCB DB TPN 4 way, double door with 100 Amp,25 KA,TP MCCB as incomer (Vertical type double door, 63 Amps MCCB rate inclusive) and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge. Make- Legrand/ Seimens/ Schinder.

S & F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 12 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge. Make- Legrand/ Seimens/ Schinder.

S&F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 2 way, single door without bus bar, enclosure made up of CRCA sheet steel RAL 9003 powder coated, IP 30 including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge. Make- Legrand/ Seimens/ Schinder.

S&F MCB SPN 5 to 32 amps 10 KA , 'C' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge. Make- Legrand/ Seimens/ Schinder.

S&F MCB SP 40 to 63 amps 10 KA , 'C' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge. Make- Legrand/ Seimens/ Schinder.

S&F MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge. Make- Legrand/ Seimens/ Schinder.

Taking down ceilling fans/ Exhaust fan, sealing cable end, including painting of fan with systhetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc. and repositioning & hanging ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan all as directed by engineer in charge.

Earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, buried directly in ground (earth pit not less level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron earth wire of 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 5 SSR including earth pit in any soil char coal common salt , 15 mm all around earth plate PCC (1:3:6) type culprit, with 40 x40x6 mm angle iron frame and PCC cover (1:2:4) type B1 , water pipe funnel and GI protection pipe light grade 15mm dia upto panel connecting earth lead to panel all as specified and directed by EIC. Note : Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate.

Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to end or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

Taking down unserviceable fresh air fan and S&F PVC fresh air fan of 300 mm sweep in toilets compete with louvers including all civil work like cutting and making opening in existing wall of toilet etc ,including including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make: CG or equivalent as approved by the GE.

Note for all items: All items shall be executed as specified and directed by Engr-in-charge.

M/S Shanti Traders

M/S BRIJLAL UPADHYAY

CREATIVE CONSTRUCTION

POONAM ELECTRIC INDUSTRY

M/s VIKAS TRADERS

Samaksh Enterprises

SHIV SHANKAR MISHRA