Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.6 LAccepted-AOC CHENNAI 034 | CHENNAI | TAMIL NADU | 600001 | L1 | Accepted-AOC ACCEPT | |
| 2 | L2₹15.8 L+₹24,488.01 (1.57%)Rejected-AOC | L2 | Rejected-AOC REJECT | |
| 3 | L3₹16.4 L+₹81,740.20 (5.25%)Rejected-AOC | L3 | Rejected-AOC REJECT |
Tender Value
₹20 L
EMD Value
₹20,000
Closing Date
13 Dec 2023, 3:00 pmClosed
The Commissioner, Coimbatore Corporation
Coimbatore Corporation, Main Office, Big bazaar street, Town hall, Coimbatore-1
Providing Fencing,Foot path and park play materials at Thendral Nagar Corporation Reserve Site in Ward No 20, North zone.
2023_MAWS_396995_4
E79/2023
Open Tender
Civil Works
Works
120 days
Coimbatore corporation-
As per the tender condition attached
3 documents required · 3 mandatory
₹0
₹20,000
26 Apr 2024
8 Dec 2023
14 Dec 2023
8 Dec 2023
13 Dec 2023
8 Dec 2023
Amount
Providing Pile Foundation of size 300mm dia using augur including labour charges and all other tools and plants charges etc., as per direction of departmental officers
Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds of rock and boulders exceeding 0.014 cum. in volume including rough dressing and dumping the excavated materials away from work site manually within 10m initial lead and 2m initial lift as per the direction of Engineer-in-charge.
Cement concrete 1:4:8 (one cement, four sand and eight aggregate) using 40mm hard broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted etc., complete complying with standard specification.
Supplying and erecting SHUTTTERING including necessary supports for plane surfaces such as RCC COLUMN FOOTING, PLINTH BEAM, STAIRCASE STEPS etc., in all floors using mild steel sheets of size 90cm X 60Cm and BG 10 stiffened with welded mild steel angles for boarding supported by Casuarinas props at suitable intervals etc., complete complying with standard specification and as directed.
Supplying and erecting SHUTTERING including necessary supports for plane surfaces in foundation and in all floors for RCC Column etc., using mild steel sheets of suitable size and BG 10 stiffened with welded mild steel etc.,
Supplying and erecting CENTERING AND SHUTTERING with necessary supports for plane surfaces such as RCC SLABS,LINTEL SUNSHADES, etc., with all cross bracings using mild steel sheets etc., complete
Supplying, fabricating and placing in position TMT/CTD rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification
Cement concrete 1:1.5:3 (one cement, one and a half sand and three aggregate) using 20mm hard broken granite stone jelly for All RCC items of work excluding centering, shuttering, and cost of reinforcement grill but including curing finishing, vibrator charges etc., complete and also including fixing fan clamps and fixtures in RCC works wherever necessary as directed by departmental officer etc., complete.
BRICK WORK in cement mortar 1:5 (one cement and five sand) using best quality of second class (Table molded chamber burnt ) bricks of size 9"x4 ½"x3" for the following including curing etc., complete complying with standard specifications. (Masonry projections wherever necessary for obtaining the required elevation shall be done without extra cost.
PLASTERING with cement mortar 1:5 (one cement and five sand) 12mm thick in all floors complying with standard specifications.
PAINTING new IRON WORKS for doors, windows and Ventilators, Iron bars Weld mesh, wire mesh, screen, steel bars, flats and other similar works etc., with TWO COATS of approved first quality of synthetic enamel paint over a base coat of red oxide primer in all floors. The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification. The paint to be used should be got approved by the Executive engineer before use on work.
Painting with two coats of Emulsion paint using good quality and approved colour over a base coat of white cement including cleaning, curing etc. complete. (The paint to be used should be got approved by the Executive engineer before use on work).
Filling with River sand layer by layer cost including watering and consolidations etc. complete as per the direction of departmental officer.
Filling with Well gravel layer by layer cost including watering and consolidations etc. complete as per the direction of departmental officer.
Filling with Quvary dust layer by layer cost including watering and consolidations etc. complete as per the direction of departmental officer.
Flooring with Interlocking block using Rubber moulded approved design and compressive strength of 200Kgs/cm2 over base of sand filling using the earth ramming machine before and after laying of blocks including maintain proper gradients and alignments but excluding Cost of Sand etc
Wiring with 2x1.5sq.mm(22/0.30) PVC insulated sc unsheathed copper conductor of 1100 V grade in suitable heavy gauage MS conduct pipe concelaed in wall and ceiling with ms accessories with ms switch box in flush with wall with 5A ft switch with 3mm thick light point SD 8
Supply and fixing of 20w LED lamp with unbreakable poly carbonate doom and 1.5 sq.m 3 core PVC insulation wire 6m length including wiring charges etc., complete.
Supply and fixing of ornamental Park benches of size 1.20m x 0.45m each for leg and rest. The seat using 100 mm x 25 mm M.S. rectangular section of 14 SWG and the leg using 50 mm dia M.S.pipe of 3mm. The benches are treated with zinc chromate approved by the Executive engineer before use on work.
Supply and fixing of merry-Go-Round using M.S pipe of 50 dia and 4mm length of 1.80m height as central pipe and bearing assembly outer pipe size of 125mm dia and 8mm thick and the unit should be assembled to a length of 250 mm. The merry go round of 6 seat approved by the Executive engineer before use on work.
Supply and fixing of slide with Ladder park model using 2Nos of 35mm dia MS.pipe of 14 SWG for standing and sliding, Platform sheet of size 0.45m x 0.90m made of S.S sheet of 16 SWG. Sliding sheet of size 2.40m x 0.45m made of fibre sheet of 14 SWG approved by the Executive engineer before use on work.
Supply and Fixing of Two seater swing using 3m long 65mm dia M.S. pipe of 3mm thick. The Slide supports are 3m long 50mm dia M.S pipe of 3mm thick. The 3 way sockets using 3mm M.S. plate and grip the entire unit rigidly. Two swing clamp with ‘U’ approved by the Executive engineer before use on work.
Supply of jungle zim using 32mm dia M.S.pipe of 2mm the running four Layers horizontally and 10 Nos of vertical pipe made of 42 mm dia M.S.pipe of 2mm thick to a height 1.80 m at the edges and centre pipe 2.10 m height approved by the Executive engineer before use on work.
Supply and Fixing of FRP Roller Slide of 8 Ft length slide with Fibre Rollers Mounted on 35 x 35 x 6mm Angle with 32 mm slide rails plat form 11/2 s 11/2 ft with safety Grills (11/2 ft x 11/2 ft) height of the platform 51/2 ft ladder & ft length made of 25mm pipes, supporting pipes of 48mm size including installation 2 ft deep 11/2 ft x 1 1/2 ft pit - 4 nos filled with PCC 1:2:4 concrete and painting with approved colour etc., complete as per the direction of the departmental officers
Supply & Fixing of Revolving platform junior 4 ft dia 4mm thick plate platform 1 ft high from the ground. 90mm heavy centre pipe 4 ft high from the ground, 2 heavy duty bearning 25mm pipe handles - 6 nos (including painting) and installation of 2 ft deep 2ft x 2ft pit with cement concrte etc., complete as per the direction of the departmenatl officers
Cement concrete 1:2:4 (one cement, two sand and four aggregate) using 20mm gauge hard broken granite stone jelly for All plain CC items of work excluding centering, shutterin, and cost of reinforcement grill but including curing finishing etc., complete
Supply and fixing of L angle, Grill including cutting, bending , welding and erection charges etc.
Supply & Fixing of Outdoor Decorative post top lantern with spun aluminium canopy & die cast aluminium spigot with opal PMMA acrylic diffuser complete with all accessories including 32mm dia GI Pipes coated with acrylic paint 26 watts CFL fittings with ISI make bulbs etc., complete as per the direction of departmental officers
SRI THANGAMMAN CONSTRUCTIONS
Srivarshan Builders
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .