Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹7.3 LAccepted-AOC HARYANA | NA | NA | 121004 | 1 | Accepted-AOC being lowest | |
| 2 | 2₹7.6 L+₹24,786.98 (3.39%)Rejected-Finance | 2 | Rejected-Finance not being the lowest | |
| 3 | 3₹8.0 L+₹65,543.62 (8.96%)Rejected-Finance | 3 | Rejected-Finance not being the lowest | |
| 4 | 4₹10.1 L+₹2.8 L (37.9%)Rejected-Finance | 4 | Rejected-Finance not being the lowest |
| Sl No | Description | Qty | Unit | THE MAHANDIPUR BALAJI LABOUR AND CONSTRUCTION SOCIETY LIMITED L3 | THE SHIV RAJ COOPERATIVE LABOUR AND CONSTRUCTION SOCIETY LIMITED L2 | Vijay Pal L1 | THE SURAJ COOPERATIVE LABOUR AND CONSTRUCTION SOCIETY LTD KKR L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | [10.100.2]Cement Concrete 1:8:16 Flooring 2. Cement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth. [Through Rate] | 37.8 | cum | 45,738 ₹45,738 | 45,360 ₹45,360 Lowest | 56,700 ₹56,700 | 79,795.8 ₹79,795.8 |
| 2.00 | [11.78]Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. [Through Rate] | 320.43 | Sqm | 9,612.9 ₹9,612.9 | 8,651.61 ₹8,651.61 | 8,331.18 ₹8,331.18 Lowest | 11,215.05 ₹11,215.05 |
| 3.00 | [13.30.1]Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 1. Hot finished welded type tubes [Through Rate] | 4,886.17 | Kg. | 4,15,324.45 ₹4,15,324.45 | 3,90,893.6 ₹3,90,893.6 Lowest | 4,15,324.45 ₹4,15,324.45 | 5,81,454.23 ₹5,81,454.23 |
| 4.00 | [4.12.1]Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. 1. All kinds of soil [Through Rate] | 4.48 | cum | 246.4 ₹246.4 | 224 ₹224 | 2.24 ₹2.24 Lowest | 394.24 ₹394.24 |
| 5.00 | [6.1.2]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) [Through Rate] | 24.19 | cum | 74,989 ₹74,989 | 72,570 ₹72,570 | 71,360.5 ₹71,360.5 Lowest | 95,284.41 ₹95,284.41 |
| 6.00 | [6.1.6]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) [Through Rate] | 2.1 | cum | 4,410 ₹4,410 | 4,200 ₹4,200 | 3,780 ₹3,780 Lowest | 5,812.8 ₹5,812.8 |
| 7.00 | [9.33]Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( plus 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. [Through Rate] | 411.17 | Sqm | 2,46,702 ₹2,46,702 | 2,34,366.9 ₹2,34,366.9 | 1,75,980.76 ₹1,75,980.76 Lowest | 2,34,778.07 ₹2,34,778.07 |
Tender Value
₹8.9 L
EMD Value
₹17,800
Closing Date
17 Feb 2026, 5:00 pmClosed
Sh Pankaj Sharma
Kurukshetra University
Estimate for providing and fixing parking shed at international Boys Hostel in Backside of kitchen in Tagore Bhawan Boys Hostel ,P/f in backside of kitchen in Uttra Bhawan Girls Hostel at K.U.K (SOCIETY ONLY)
2026_HRY_501309_1
2026F457EC87 90A6 4EF3 BC5C 44B3920FF8B81139KUK
Open Tender
Civil Works
Works
90 days
Kurukshetra (Thanesar)
2 documents required · 2 mandatory
₹1,180
₹17,800
Yes
7 May 2026
9 Feb 2026
18 Feb 2026
9 Feb 2026
17 Feb 2026
9 Feb 2026
[10.100.2]Cement Concrete 1:8:16 Flooring 2. Cement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth. [Through Rate]
[11.78]Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. [Through Rate]
[13.30.1]Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 1. Hot finished welded type tubes [Through Rate]
[4.12.1]Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. 1. All kinds of soil [Through Rate]
[6.1.2]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) [Through Rate]
[6.1.6]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) [Through Rate]
[9.33]Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( plus 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. [Through Rate]
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
BOQ_579943.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .