Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.9 LAccepted-AOC | L1 | Accepted-AOC Accept | |
| 2 | L2₹21.1 L+₹20,568 (0.98%)Rejected-AOC | L2 | Rejected-AOC Reject |
Tender Value
Refer Docs
EMD Value
₹25,000
Closing Date
8 Dec 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Officer, Sithayankottai Town Panchayat
Town Panchayat Office, Sithayankottai
Providing Park at 7th Ward Samiyar Street Yogam Nagar in Sithayankottai Town Panchayat
2023_DTP_395566_1
269/2023
Open Tender
Civil Works
Works
180 days
Sithayankottai
Class I
3 documents required · 3 mandatory
₹10,665
Yes
₹25,000
Sithayankottai Town Panchayat
17 May 2024
2 Dec 2023
8 Dec 2023
2 Dec 2023
8 Dec 2023
2 Dec 2023
2 Dec 2023 - 8 Dec 2023
4 Dec 2023
Earthwork excavation for foundation in all soils and sub soils in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders and to full depth as may be directed,except in hard rock,requiring blasting including shoring and shuttering and bailing out of water wherever necessary,refilling the sides of foundation with excavated earth or sand in layer of not more than 15cm thick.well rammed and consolidated and depositing on bank with initial lead and lift of 10m & initial lift of 2m and depositing the surplusr earth within the compound in places shown by the departmental officers with iniital lead and lifts,clearing and levelling the site etc., complete as per SS20B and as directed by departmental Engineers(TNBP No.20B). - Footing
Plinth Beam & side wall
Plain Cement Concrete 1:4:8 mix (One Part Cement, Four Part Fine Aggregate and Eight Part Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials to work site and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNBP No.28).
Supplying and erecting centering for sides and soffits including supports and strutting uptp 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90cmx60cm and 10 gauge stiffened, welded with mild steel angles of size 25mmx25x3mm for boarding laid over silver oak (country wood) joist of size 10cmx6.5cm dia spaced about 90cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre tocentre etc.complete complying with standard specification and as directed by the departmental engineers. TNBP No.30 - Footings&Plinth Beams
For Coloumn
For Side Wall
Reinforced Cement concrete 1:1 1/2:3 (One Part cement, one and half Part Fine Aggregate and Three Part coarse aggregate) using machine crushed 20mm gauge hard broken stone jelly for all RCC items of work excluding centering strutting, and reinforcement grills placed in position but including mixing concrete, laying finishing and curing, etc complete complying with standard specification( TNBP No:30)
Supplying, fabricating and placing in position mild steel or ribbed tor steel for all reinforced cement concrete works as per design given including cost of steel and binding wire with all conveyance and lead charges in all floors etc.complete complying with standard specifications and as directed by the deparmental engineers. TNBP No:30
Brick Work in CM 1:5 (One part cement & five part of Fine aggregate) mix using best quality II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:31
Plastering with CM 1:5 (One part cement & five part Fine aggregate) mix for 12mm thick including cost and conveyance of all materials to work site and including all labour charges for mixing, laying, finishing and curing,etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:56&57
Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A
Supplying, fabricating and fixing in position of mild steel Griil Gate and Design Grill, including providing one coat of red oxide primer. The rates shall inclusive of cost of all materials,Conveyence and all labour charges for fixing in position by dismantling the masonry, concrete etc. and redoing the same to the original condition duly packed with concrete etc., complete as per standard specifications and as directed by departmental Engineers
Painting with two coats of Approved colour of best quality synthetic enamel paint, painting over new iron work including cost and conveyance of all materials and all labour charges etc. complete as per Standard specification and as directed by the departmental officers. (New Iron Surface).TNBP No:66&66-A
Plain Cement Concrete 1:2:4 Mix (one Part cement, Two Part Fine aggregates and Four Part of Coarse aggregates) using 20mm size ISS HBG machine crushed metal from approved quarry including cost and conveyance of all materials to site, loading , unloading charges and all labour charges for mixing, laying,Finishing and curing etc., complete as per TNDSS NO: 28
Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver block in required sizes of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurrying bone pattern with approved non sticking surface in the top and the rate including leveling the base preparation of sub base with stone dust cushion 100mm thick, laying out the pavement cut the pieces to fit the edge, vibrating the pavers, sweeping transporting, loading unloading and laying of paver block as per standard specification.-10 Sqm paver Block rate PWD SOR Page No; 40 M - 0223
Four Seated see - Saw Manufacturing, supply and erection of Fourt seated see - saw of size 2.10 Mt long and 1.5Mt width supporting with 35mm dia of C.R. pipe of "B" class thickness and 4 Nos. of seat arrangements, one safety back rest up & down movement will controlled by heavy duty bearing mounting including one coat of anti rust epoxy primer and two coat of multicolor epoxy coating for glazy finish with foundation clamp etc., complete, including cost of all materials all labour charges etc complete
FRP Double SideManufacturing, supply and erection of FRP Double slide of sliding lengh 2.1 Heigh 1.82m & width 508 mm made of 63.5mm, 55mm, 35mm, 25mm B Class CR pipe, the sliding area made by S.S sheet 2 Nos. including one coat of anti rust epoxy primer and two coat of multicolor epoxy coating for glazy finish with foundation clamp etc., complete, including cost of all materials all labour charges etc complete
Four SS Seated Swing Manufacturing, supply and ereciton of fourt seated seated swing made of 50mm, 63.50mm S.S. Pipe. Dimensions Height 3.048 meter, Length 6.096 meters. Tested Bearing supported molded chains with attractive colors. Seating arrangments made by GI sheet including one coat of anit rust expoxy primer and two coat of multicolor epoxy coating for glazy finish with foundation clamp including one coat of anti rust epoxy primer and two coat of multicolor epoxy coating for glazy finish with foundation clamp etc., completed,including cost of all materials all labour charges etc complete
Providing Three Seater Granite Bench arrangements with Both Bottom and sliding portion of Granite Slabof 60mm thick with side handle supports,Cost including Granite slab,Conveyance,Cutting,Grinding and Fixing etc,Complete
supply and Fixing of 4 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 4000mm Length etc complete
Supply of 25W LED Street Light Fitting with LED etc complete
Supplying and Fixing of 32mm Dia PVC Rigid Pipes
Supply and Clarnping of 2 x 10 Sqmm PVC insulated LTUG armoured Cable on Post or on walls using M.S.Clamp, including cost and coveyance of cable and all materials to site and labour charges etc complete.(SD-216)
Supply and delivery of pvc &GI specials including cost for materials and all labour charges for completed - 25 mm Dia UPVC Pipe
25 mmG.M Gate Valve
1000 Lit HDPE Tank ISI / ISO
20mm G.I.Coupling
20mm Waste not Tap
Supplying and fixing of 16Amps DP Switch with Metal Galad of 500 V with Fuse and Neutral (Side Handle) on T.W.Box with P.W.D.Earting(SD No.141)
supply and fixing of TNEB meter board suitable for 32 A Three phase service connection with 32A fues unit (500 V) 32A neutral link and earth link (1"X18" copper flat) on TW plant of size 600mm X 450mm X19 with supporiting TW reepers of 1 " thick an either side withpainting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD No.127)
Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains (SD No.64)
Supply and run of 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mmdia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD No.69)
CHINNAMUTHU
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .