REPAIR/REPLACEMENT OF JOINERY, STEEL WINDOW, VENTILATORS, WIRE GAUGE IRON PIPE, PLASTERING, TILING AND OTHER CONNECTED ITEMS IN JK, CHARARI, KAJIKHERA, SUBHASH ROAD, N-2 ROAD AND AGV AT AFS CHAKERI, KANPUR

Amount

S & F prelaminated solid PVC door frame of size 50 mm x47 mm made out of 5 mm thick colour PVC sheet reinforced with MS tube complete all as specified and directed.

S & F factory made both side prelaminated solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail, panelling of double side prelaminated PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.

S & F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S & F 150 mm long Aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F aluminium handles extruded type, anodised of 125 mm size complete all as specified and directed.

Demolition of brick work built in cement mortar in any position not otherwise described complete all as specified and directed.

M & L for brick work straight or cuved on plan exceeding 6.0 m mean radius built in CM (1:6) using of old size bricks complete all as specified directed.

Labour only for brick work with sub class 'B' brick straight or curved on plan not exceeding 6.0 m mean radius built in CM (1:6) complete all as specified and as directed. (Old serviceable brick obtained from item No-06.00 above).

Taking down cement plaster on brick or concrete surfaces etc complete all as specified and directed.

M & L for 15 mm thick plastering on fair faces of brick wall or concrete surfaces in CM (1:6) finish even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plaster surfaces of wall and applying three coat of white wash complete all as specified and directed.

Easing of door shutters for easy closing / opening, tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding door bolts with new screws etc complete all as specified and directed.

Easing of window shutters, kitchen cupboard shutters, show case shutter, drawers including fixing of screws adjusting handles, knobs tightening piano hinges including misc small adjustments complete all as specified and directed.

S & F in repair 75 mm long double legged door stopper of aluminium alloy with rubber moulding complete all as specified and directed .

S & F in repair 100 mm long aluminium anodized hasp & staple safety type with mild steel hinge pin including bolt to hinge plate fixed with screws complete all as specified and directed

S & F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as speficied & directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples complete all as speficied & directed.

Hacking out old broken glass (any size, quality or description) from wooden or steel frames glazed complete all as specified and directed.

S & F 4 mm thick plain/frosted sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane upto 12th storey complete all as specified and directed.

S & F in repair curtain rods of Chromium plated mild steel conduit pipe having 19 mm dia with wall thickness 1mm including chromium plated bracket holders for holding of rods and fixed with screws to pelmet boxes/wall etc complete all as specified and directed.

Dismantling mild steel Work of any description fixed in any position not otherwise provided for complete all as specified and directed.

S & F plain fillets square, rectangular or any section, clean sawn, secured with nails and setional area exceeding 3.0 Sqcm but not exceeding 6.0 sqcm, using IInd class HW complete all as specified and directed.

Taking down chowkhat or frame not exceeding 1.50 sqm with shutters (wihtout taking off shutter from frame ) etc complete all as specified and directed.

Ditto all as per above item No.24.00 here-in-before and not exceeding 4.00 Sqm but exceeding 1.5 Sqm.

Taking down shutter not exceeding 1.0 Sqm complete all as specified and directed.

Taking down shutter exc. 1.0 Sqm and not exc.2.0 Sqm complete all as specified and directed.

S & F plain solid straight chowkhat or frame rebated on the solid rounded or chmferred put together with glue pinned at joints in 2nd class HW complete all as specified and directed.

S & F 35 mm thick IInd class HW factory made glazed and skelton door shutters open rebated and prepare to receive glass/gauge etc, without sash bars, edges of framing plain chamfered or rounded, fitted without mitred beads for securing glass etc size of members of shutters as specified in SSR Part 1 Sec 8 clause 8.24 (a) complete all as specified and directed.

S & F 30 mm thick IInd class HW factory made glazed and skelton wndow/ventilator shutters open rebated and prepare to receive glass/gauge etc, with plain chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain chamfered or rounded, fitted cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part 1 Sec 8 clause 8.20 (b) complete all as specified and directed.

S & F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35 mm thick factory made plain framed, panelled shutter (two panel) 2nd class HW rail and style with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial venerring on both faces. The size of rail and stile shall be as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 75 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S & F in repair 75 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S & F 100 mm size but hinges medium weight cold rolled mild steel complete all as specified and directed.

S & F in repair 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S & F in mild steel helical door spring 150 mm ordinary rat tail type including roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S & F in repair mild steel helical door spring 150 mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S & F 250 mm long, mild steel sliding door bolt stove enameled black with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F in repair mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 250mm complete all as specified and directed

S & F 150 mm long mild steel barel tower bolt stove enamelled black with bright bolt complete all as specified and directed.

S & F in repair 150 mm long mild steel barel tower bolt stove enamelled black with bright bolt complete all as specified and directed.

S & F 125 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

S & F in repair 125 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

S & F 100 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

S & F in repair 100 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exc. 10cm width or girth complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description exc. 10cm width or girth complete all as specified and as directed.

Taking down steel chowket or frame with shutters (wihtout taking off shutter from frame ) of any description etc complete all as specified and directed.

S & F Steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat zinc chrome primer complete all as specified and directed.

S & F Steel window with side hung shutters incuding box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S & F Steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

M & L for MS work such as grills, grating, hold fast etc with end of bars shouldered and/ or reveted or forged into spikes framed guard bars barred iron doors, ladders, framed balusters, walk ways railing, framework of water tanks and simillars works conforming to FE 410 Gde-310 complete all as specified and directed.

M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in bed block for fixing of angle iron post, hold fast and the similer work complete all as specified and directed.

Taking down, easing and adjusting wooden shutters of any description not exceeding 1 sqm each refixing in the same opening, complete all as specified and directed.

Ditto all as per items No.55.00 here-in-before, exceeding 1.0 sqm but not exceeding 2.0 sqm each refixing in the same opening.

S & F rubber beading 75 mm wide fixing with nail/screw complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish from out of MD land complete all as specified and directed.

M & L for 7 to 8 mm thick non skid ceramic coloured tiles (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc laid over and including 15 mm thick screed bed in CM (1:6) including jointing in neat cement slurry and pointed in coloured cement to match with shade of tiles complete all as specified and directed.

M & L for 25 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in flooring sub-base, concrete surface finished even and fair to receive screed of tiles etc. complete all as specified and directed

Demolition of cement concrete in ground floors and pavings not exceeding 15cm thick below or above ground level including tiles, etc and removing rubbish out off MD land complete all as specified and directed.

M & L for MS frame work such as iron doors and windows including with gusset plates, rails,braces, MS sheet etc and simillars works conforming to Fe-410 complete all as specified and directed. Notes- For all items (a) All items shall be executed/covered upto 12th storey height of AGV area. (b) All T&P, mask sanitiser, safety equipments and other items required at site under subject contract shall be provided by Contractor. Cost of temporary supports such as Props, Jacks, Scaffolding, Shuttering etc as required for each individual case component wise deemed to be included in unit rates quoted. (c) Adequate safety arrangement need to be ensured to avoid accidents/mishap & cost of same is deemed to be included in unit rates quoted.

P.N. BROTHER

M/S ASM ENTERPRISES

SHASHI CONTRACTORS

RAJAT TRADERS